Quickset Wary-5.1.1-01q the Final Release
Corrupted de-locale cups interface and no locale start side
Hi shinobar,
thanks for Wary5m - this is great!
Wondering why I had a corrupted cups interface (section 'printers'): so I looked for the locale cups-templates: after replacing your lang-pack version (/opt) with a original 1.3.11 template it was okay. See images.
So, there was no localized main page of the cups interface, because this side is NOT in (usr/share/cups/templates/XX but original inside /usr/share/docs/cups/XX. Copying this from 1.3.11-source forces getting a localized main page on localhost:631, otherwise there is always only english under Cups' "Home"-Button.
These /usr/share/docs/cups/XX files should be added to the language pack in /opt.
mave
thanks for Wary5m - this is great!
Wondering why I had a corrupted cups interface (section 'printers'): so I looked for the locale cups-templates: after replacing your lang-pack version (/opt) with a original 1.3.11 template it was okay. See images.
So, there was no localized main page of the cups interface, because this side is NOT in (usr/share/cups/templates/XX but original inside /usr/share/docs/cups/XX. Copying this from 1.3.11-source forces getting a localized main page on localhost:631, otherwise there is always only english under Cups' "Home"-Button.
These /usr/share/docs/cups/XX files should be added to the language pack in /opt.
mave
- Attachments
-
- cups_with_lang-pack_de_template_from_1.3.11_source.jpg
- After replacing /usr/shared/cups/templates/de with template from original source 1.3.11...
- (144.49 KiB) Downloaded 451 times
-
- cups_with_lang-pack_de_template.jpg
- Corrupted printer section...
- (90.38 KiB) Downloaded 471 times
Last edited by mave on Sat 05 Feb 2011, 09:53, edited 1 time in total.
Re: Corrupted de-locale cups interface and no locale start side
Great, mave!mave wrote:Wondering why I had a corrupted cups interface (section 'printers'): so I looked for the locale cups-templates: after replacing your lang-pack version (/opt) with a original 1.3.11 template it was okay.
Confirmed some files are lacking in the lang_pack. I wonder why it occured... ah, maybe the lang_pack has the files of the different version cups.
I will upload corrected version of lang_pack.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
welcome screen wary 06
I tried the German language in Wary 06 multilingual .
On first bootup I noticed that there was two welcome screens, one in
English , then another in German.
Since this Puppy is meant for people who are German rather
than English, I would suggest that it would be better
to make the English welcome screen a menu item and
keep the German welcome screen as an automatic popup
screen after 'firstrun' . Two automatic popup welcome screens
is just too much.
__________________________________________________
On first bootup I noticed that there was two welcome screens, one in
English , then another in German.
Since this Puppy is meant for people who are German rather
than English, I would suggest that it would be better
to make the English welcome screen a menu item and
keep the German welcome screen as an automatic popup
screen after 'firstrun' . Two automatic popup welcome screens
is just too much.
__________________________________________________
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
wary500m07
bootet wary500m07 pfix=ram
no pupsave
loaded-on-the-fly lang_pack_de.sfs (selfmade from pet)
no restart of X
cups:
if "add a new printer" = yes then goto please
I have made manpages_NLS.pet for 13 languages,
from d e b i a n , extracted command which are in puppy and recoded to utf8. but cannot upload (8 GB) here.
See it in action here:
no pupsave
loaded-on-the-fly lang_pack_de.sfs (selfmade from pet)
no restart of X
cups:
if "add a new printer" = yes then goto
Code: Select all
http://localhost:631/admin?op=find-new-printers
I have made manpages_NLS.pet for 13 languages,
from d e b i a n , extracted command which are in puppy and recoded to utf8. but cannot upload (8 GB) here.
See it in action here:
Upload manpages
Get the IP address by clicking the followed. Copy and paste the IP address, '***.***.***.***', as the hostname for the gftp to upload. Username: pu**y, password: li**xL18L wrote:I have made manpages_NLS.pet for 13 languages,
from d e b i a n , extracted command which are in puppy and recoded to utf8. but cannot upload (8 GB) here.
http://shino.pos.to/party/bridge.cgi?ftp
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
upload manpages
thanks shinobar
pman is included with small change
>> temporary file not deleted so you can change encoding in browser
maybe needs more testing:
was working OK in wary500m06
scripts included in usr/share/man where manpages-XX.deb install
unfatten: deletes files not in puppy
code2utf8: from codes found by trial
It was a nice exercise for me (my 2nd pet)
But do we need manpages_NLS.pet ???
Or just put the man into lang_pack ?
What do you think?
edit
I am voting for "manpages in lang_pack".
- I have taken all available manpages from d e b i a n stable, which might be outdated
and I cannot check for maybe better or more complete translations in other languages.
With "manpages in lang_pack" every language maintainer
can update or upgrade how she likes.
- with future lang_pack-XX.sfs size will not matter
pman is included with small change
>> temporary file not deleted so you can change encoding in browser
maybe needs more testing:
was working OK in wary500m06
scripts included in usr/share/man where manpages-XX.deb install
unfatten: deletes files not in puppy
code2utf8: from codes found by trial
It was a nice exercise for me (my 2nd pet)
But do we need manpages_NLS.pet ???
Or just put the man into lang_pack ?
What do you think?
edit
I am voting for "manpages in lang_pack".
- I have taken all available manpages from d e b i a n stable, which might be outdated
and I cannot check for maybe better or more complete translations in other languages.
With "manpages in lang_pack" every language maintainer
can update or upgrade how she likes.
- with future lang_pack-XX.sfs size will not matter
Re: upload manpages
Download
It must be deleted after the browser is closed...
By the way, pman is called from the puppyhelp, the 'help' icon on the desktop as for the wary-500-m07.
I am wondering when it disappears.L18L wrote:pman is included with small change
>> temporary file not deleted so you can change encoding in browser
It must be deleted after the browser is closed...
By the way, pman is called from the puppyhelp, the 'help' icon on the desktop as for the wary-500-m07.
Last edited by shinobar on Sun 06 Feb 2011, 13:56, edited 1 time in total.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
puppy-manpages
thanks for quoting thisBy the way, pman is called from the puppyhelp, the 'felp' icon on the desktop as for the wary-500-m07.
I did not think to klick the help icon
I hope the menu help will result in the same action one day
In puppyhelp it was not clear for me that "Search manuals" is also an input field, maybe labeling input or select would be better.
changes in my pman (included in pet) are:
Code: Select all
;;
man2html)
#TMPFILE=/tmp/$(basename "$FNDMAN" .gz | tr '.' '_').html
TMPFILE=/tmp/last_call_for_pman.html
if echo "$FNDMAN" | grep -q '.gz$' ;then
zcat "$FNDMAN" | man2html > $TMPFILE
else
man2html "$FNDMAN" > $TMPFILE
fi
$HTMLVIEWER $TMPFILE
#rm -f $TMPFILE # enables switching of encoding !important
exit
;;
works this way from
Code: Select all
pman ls
>file:///tmp/last_call_for_pman.html
which will be overwritten at next pman from console
but from puppyhelp it is:
>file:///tmp/ls_1.html
which is immediately deleted
are there 2 versions of pman now?
Re: puppy-manpages
Yes, 2 versions of pman for now,L18L wrote: from puppyhelp it is:
>file:///tmp/ls_1.html
which is immediately deleted
are there 2 versions of pman now?
I am wondering in what case the temporal file, /tmp/ls_1.html, is deleted, and found
- Launch the browser and seach 'ls' from puppyhelp. The /tmp/ls_1.html is deleted.
- Close the browser, search 'ls' from puppyhelp. The /tmp/ls_1.html is still alive.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
wary500m07
Hi shinobar,
returning from the tests of SFS_Exec which had to be poweroff'ed by turn off the power
now there was at the boot screen a not surprising error message about a previously mounted partition.
In such cases I am used to use
But: see Subject description.
The partition now is accessable without my fsck
Any idea why fsck is missing?
Best regards
returning from the tests of SFS_Exec which had to be poweroff'ed by turn off the power
now there was at the boot screen a not surprising error message about a previously mounted partition.
In such cases I am used to use
Code: Select all
fsck /dev/XXX
The partition now is accessable without my fsck
Any idea why fsck is missing?
Best regards
Re: wary500m07
maybe Barry forgot it...L18L wrote:Any idea why fsck is missing?
There is e2fsck for ext2/3/4 but fsck is missing.
FIXED by Barry:
Here is util-linux-2.16.1-1-w5.pet.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
german usr_sbin.po/mo/pot and some modifications
Hi,
attached a german usr_sbin.po (and mo, pot).
Also modified Floppy_Formatter (little changes in layout formatting) and video_upgrade_wizard, because entry title on the top wasn't gettexted in the script (usr_sbin.pot manually modified!)
mave
attached a german usr_sbin.po (and mo, pot).
Also modified Floppy_Formatter (little changes in layout formatting) and video_upgrade_wizard, because entry title on the top wasn't gettexted in the script (usr_sbin.pot manually modified!)
mave
- Attachments
-
- usr_sbin_i18n.tar.gz
- usr_sbin.po/mo/pot, Floppy_Formatter, video_upgrade_wizard
- (49.46 KiB) Downloaded 396 times
-
- video_upgrade_wizard.jpg
- (191.67 KiB) Downloaded 462 times
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
Wary-500m07 w/100 languages
some minor revisions inclusive don570's error messages (thanks don570 )
+ tar.mo wget.mo xsane.mo
to make it work just extract and copy to /
Thanks to mave (see post above) who had the largest part we now are almost complete.
+ tar.mo wget.mo xsane.mo
to make it work just extract and copy to /
Thanks to mave (see post above) who had the largest part we now are almost complete.
- Attachments
-
- update_for_lang_pack_de.tar.gz
- see post
- (108.79 KiB) Downloaded 388 times
Next release
Thanks to all. For your information:
I will upload wary-500m08 in couple of days. It will be our beta stage.
See the TO DO
I will upload wary-500m08 in couple of days. It will be our beta stage.
See the TO DO
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
language packs for cups 1.3.11
Available lang-packs for cups 1.3.11, including also main-page of the cups-interface, which isn't in /usr/share/cups/templates...
mave
mave
Welcome1stboot
I modified the welcome1stboot.
Sensing Puppy status and gives proper message.
See the SS.
Sensing Puppy status and gives proper message.
See the SS.
- Attachments
-
- welcomenew480.png
- Sens the internet connection, PupsaveConfig...
- (17.79 KiB) Downloaded 1277 times
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Wary-500m08 beta release
Now the beta release Wary-500m08 is available.
If you already have the previous wary-500m on your HDD, replace all the 3 system files, vmlinuz, initrd.gz and wary_500.sfs.
The lang_pack is also updated. Remove the old lang_pack and replace with the new contained in the wary-500m08.iso.
CHANGES:
If you already have the previous wary-500m on your HDD, replace all the 3 system files, vmlinuz, initrd.gz and wary_500.sfs.
The lang_pack is also updated. Remove the old lang_pack and replace with the new contained in the wary-500m08.iso.
CHANGES:
- vmlinuz and wary_500.sfs has unique id to avoid taking wrong system files
- First run sequence, new welcome1stboot, index.html, home.htm.
- extralang updated to v0.3
- updated lang_pack's including cups translations, thanks to mave
- desktop icon distance same as LupQ-511
- pnethood utf8 option as the default
- sfs_load updated to v0.7
- pupsaveconfig updated to v1.9.9
- grub4dosconfig updated to v1.7
- Puppyhelp updated
- util-linux updated to 2.16.1-1-w5
- rc.update updated(lol) as the one of wary-501/3
- Puppy Package Manager bugfix and improved splash(not includes zigbert's new GUI)
- Snup2 comes back to the main menu replacing pbackup
- snapmergepuppy to be faster
- pdict to be updated
- pman or man2html to be supporting UTF-8 encoding and I18n correction
- Pschedule, Pupradio, You2pup to be updated
- slim down, removing some applicatons
Last edited by shinobar on Thu 17 Feb 2011, 04:51, edited 11 times in total.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Hi Shinobar.
Haven't been home for a long time.
Today i tried your new "Wary-08".So far so good .No problem.
My favorite one is LUPQ-511. I use it on my laptop [ live-DVD],
but i think Wary-08 is much better to my desktop PC.
Can you tell me is there something really important to move from LUPQ-511 to Wary or you plan to update LUPQ-511 too ?
Greetings !!!
Haven't been home for a long time.
Today i tried your new "Wary-08".So far so good .No problem.
My favorite one is LUPQ-511. I use it on my laptop [ live-DVD],
but i think Wary-08 is much better to my desktop PC.
Can you tell me is there something really important to move from LUPQ-511 to Wary or you plan to update LUPQ-511 too ?
Greetings !!!
Future plan
Hi, yordan. Welcome back.yordanj94 wrote:Can you tell me is there something really important to move from LUPQ-511 to Wary or you plan to update LUPQ-511 too ?
I will update the LupQ after the wary development settles down.
But I think wary is faster than lupQ/lupu for old PC's.
I recommend lupQ only for heavy users who want to install Ubuntu packages.
One concern with wary is Barry is introducing new kernel for the next wary-5.1.
So the kernel 2.6.31.14 of the wary-500 seems tentative.
My another interest is updating Puppy-4.x series with our new user interface and updated applications.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Great news .
Puppy 4.3.1 was my first live CD,but i had a real nightmare with a cyrillic letters,especially with saved web pages on my usb flash card so couldn't read most of them and had to gave up.
I don't need any Ubuntu packages ,but LUPQ-511 for sure works better on Dell Latitude c610 especially touchpad settings .
What surprised me was that for the same avi files mplayer in Wary uses 45% and LUPQ 85% of the processor power.
It's not so important just curious .
Thanks for your hard job.
Puppy 4.3.1 was my first live CD,but i had a real nightmare with a cyrillic letters,especially with saved web pages on my usb flash card so couldn't read most of them and had to gave up.
I don't need any Ubuntu packages ,but LUPQ-511 for sure works better on Dell Latitude c610 especially touchpad settings .
What surprised me was that for the same avi files mplayer in Wary uses 45% and LUPQ 85% of the processor power.
It's not so important just curious .
Thanks for your hard job.