Slacko 5.3.3-RC2 (5.3.2.4[0])
Ok - will give that a try and report back.James C wrote:Just for informational purposes, that nic uses themajorfoo wrote: 1. Ethernet Controller-ADMtek NC100 Network Everywhere Fast Ethernet 10/100 (rev 11)that I posted about earlier.Code: Select all
tulip : Digital 21*4* Tulip ethernet driver
majorfoo
Interesting thing is...3.1.8 in wuxiandianzi Lucid 5.2.8 based puplet and b43 autoloads. So...it really can be more of the recent woof problem than exactly kernel spesific. Although b43 autoloads with 2.6.39.4 and recent woof. Could there be some script which still needs patching for 3.X kernels. And why it seems to affect b43 only.
You will need patched acpitool source. Check Jemimah`s source folder in smokey01 repo.
You will need patched acpitool source. Check Jemimah`s source folder in smokey01 repo.
For me SNS didnt launch. Xerrs.log reported this:
/usr/sbin/net-setup.sh: line 1683: scanpci: command not found
I grabbed the scanpci from the Out house and then the SNS started. Ath9k and atl1e found. Wireless with WPA works ok.
DOTconfig seems to miss whole tulip. No matches when I used search.
Annihilation of whole tulip family.
You seem to use aufs, like me with 3.1 kernel. Somebody could check if usb installation, booting and then pet installation using PPM and saving the pets is succesful. I mean are they still saved and usable after reboot. That has been the problem with aufs and 3.X kernels. Or maybe 01micko has already cured it.
/usr/sbin/net-setup.sh: line 1683: scanpci: command not found
I grabbed the scanpci from the Out house and then the SNS started. Ath9k and atl1e found. Wireless with WPA works ok.
DOTconfig seems to miss whole tulip. No matches when I used search.
Annihilation of whole tulip family.
You seem to use aufs, like me with 3.1 kernel. Somebody could check if usb installation, booting and then pet installation using PPM and saving the pets is succesful. I mean are they still saved and usable after reboot. That has been the problem with aufs and 3.X kernels. Or maybe 01micko has already cured it.
yeah, I already compiled gmome-mplayer 1.0.5 but didn't put it in, the problem is that "dconf" package isn't there, and I refuse to compile against the gconf bloat!
Puppy Linux Blog - contact me for access
Actually, usb2 is not broken, In Jim's report there is "ERROR: modinfo: could not find module ehci_hcd"... that's because it's compiled into the vmlinuz (the kernel).
Ok, I've caught all the ethernet modules *I think* (realtek, tulip, broadcom and others), also iwlagn, wireless,
I'll take a look in STA see if there is new stuff.
@nooby.. the command is jwm -restart (with a space)
Anyway, I put a feature request in with Joe Wing to do an automatic restart of jwm and he has done it in jwm-svn-576 so I'm hoping this finally fixes that problem you have.
Ok, I've caught all the ethernet modules *I think* (realtek, tulip, broadcom and others), also iwlagn, wireless,
I'll take a look in STA see if there is new stuff.
@nooby.. the command is jwm -restart (with a space)
Anyway, I put a feature request in with Joe Wing to do an automatic restart of jwm and he has done it in jwm-svn-576 so I'm hoping this finally fixes that problem you have.
Puppy Linux Blog - contact me for access
A2 and support files is uploaded
see main post
Should be more fun than A1 (in a fun way)
see main post
Should be more fun than A1 (in a fun way)
Puppy Linux Blog - contact me for access
5.3.1.1
Hi Mic!
Looks like the makings of a good program 'Keep After It!'
One problem that I've never encountered in a puppy to date... while running 5.3.1.1 (maybe this is fixed in 5.3.1.2? haven't tried that one yet.)
eth0 'not' recognized Ethernet cable is plugged into computer and works with Slack0-5.3.1 and all other puppy's.
wlan0 'is' recognized however I don't have wifi router active but Linksys AE1000 Wireless-N Adopter is plugged into computer.
-----------------------------------------------------
Intel Corporation 82562EZ 10/100 Ethernet Controller
PCI bridge: Intel Corporation 82801 PCI Bridge
Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz
-----------------------------------------------------
>>>---Indian------>
Looks like the makings of a good program 'Keep After It!'
One problem that I've never encountered in a puppy to date... while running 5.3.1.1 (maybe this is fixed in 5.3.1.2? haven't tried that one yet.)
eth0 'not' recognized Ethernet cable is plugged into computer and works with Slack0-5.3.1 and all other puppy's.
wlan0 'is' recognized however I don't have wifi router active but Linksys AE1000 Wireless-N Adopter is plugged into computer.
-----------------------------------------------------
Intel Corporation 82562EZ 10/100 Ethernet Controller
PCI bridge: Intel Corporation 82801 PCI Bridge
Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz
-----------------------------------------------------
>>>---Indian------>
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
yep, known issue should be fixed in current version 5.3.1.2 (get the delta )sszindian wrote:One problem that I've never encountered in a puppy to date... while running 5.3.1.1 (maybe this is fixed in 5.3.1.2? haven't tried that one yet.)
eth0 'not' recognized
Puppy Linux Blog - contact me for access
Hi Mick01micko wrote:A2 and support files is uploaded
see main post
Should be more fun than A1 (in a fun way)
Pristine manual frugal install using the 5.3.1.1 to 5.3.1.2 delta...
Can confirm that the "B43 not detected" problem is still there....but putting modprobe b43 into rc.local solves.
Let me know if I can test anything for you.
In case it helps, I've attached the /var/log/messages file from wuxiandianzi 's lupu528-k318 (remove .gz to fool forum)
Cheers
Peter
- Attachments
-
- messages.gz
- (60.44 KiB) Downloaded 496 times
Last edited by peebee on Mon 16 Jan 2012, 15:30, edited 1 time in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Slacko 5.3.2-alpha2 ..testing
I did a manual frugal install to my acer revo nettop pc.
It went straight to the desktop at the correct resolution, using the
nouveau driver I think.
The builtin wireless adapter isn't supported,
Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe.
I plugged in a linksys rt73 usb wireless adapter and it is working
well.
I installed the devx and kernel source sfs and the Nvidia driver for
the ION chip in this pc, it took an extra reboot and 2nd try to
compile the nvidia driver because the nouveau driver conflicts with
the proprietary nvidia driver, it did successfully compile after doing
that.
Mon 16 Jan 2012 Operating System: Slacko Puppy-5.3.1.2 Linux 3.1.9-slacko_4g
0.0 VGA compatible controller: nVidia Corporation ION VGA (rev b1)
oem: NVIDIA product: MCP79 Board - hornet-0 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.9.5
dimensions: 1440x900 pixels (373x231 millimeters)
depth of root window: 24 planes
Intel(R) Atom(TM) CPU 330
Core 0: 1600 1: 1600 2: 1600 3: 1600 MHz
It went straight to the desktop at the correct resolution, using the
nouveau driver I think.
The builtin wireless adapter isn't supported,
Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe.
I plugged in a linksys rt73 usb wireless adapter and it is working
well.
I installed the devx and kernel source sfs and the Nvidia driver for
the ION chip in this pc, it took an extra reboot and 2nd try to
compile the nvidia driver because the nouveau driver conflicts with
the proprietary nvidia driver, it did successfully compile after doing
that.
Mon 16 Jan 2012 Operating System: Slacko Puppy-5.3.1.2 Linux 3.1.9-slacko_4g
0.0 VGA compatible controller: nVidia Corporation ION VGA (rev b1)
oem: NVIDIA product: MCP79 Board - hornet-0 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.9.5
dimensions: 1440x900 pixels (373x231 millimeters)
depth of root window: 24 planes
Intel(R) Atom(TM) CPU 330
Core 0: 1600 1: 1600 2: 1600 3: 1600 MHz
- Attachments
-
- spupscrn.jpg
- (115.99 KiB) Downloaded 1395 times
Edit after testing with correct cli command
nope that did not help.
I tested to use it prior to deciding timezone and keyboard
and tested it after that restart too and none of that helped.
The only thing that repair it is to edit out from xorg.conf the added
info which is kind of sad because a lot of that should be there and
I should only edit the part that make 1024 x 768 invisible.
But I have no idea how to do that.
In lupu528 it looks like this
file I should look in on slacko? I remember vaguely that I did borrow
a xorg.conf file from lupu to use in slacko last time to correct the
"feature" that I don't want to have. 1024 x 600. I want to ahve the
1024 x 768 instead.
nope that did not help.
I tested to use it prior to deciding timezone and keyboard
and tested it after that restart too and none of that helped.
The only thing that repair it is to edit out from xorg.conf the added
info which is kind of sad because a lot of that should be there and
I should only edit the part that make 1024 x 768 invisible.
But I have no idea how to do that.
In lupu528 it looks like this
But in Slacko that part seems to be missing. Maybe it is another#everything past here is auto-generated by Puppy's Xorg Wizard...
file I should look in on slacko? I remember vaguely that I did borrow
a xorg.conf file from lupu to use in slacko last time to correct the
"feature" that I don't want to have. 1024 x 600. I want to ahve the
1024 x 768 instead.
I use Google Search on Puppy Forum
not an ideal solution though
not an ideal solution though
Hi Mick,
Wow, that was a quick update. Frugal installations on my main desktop and my Dell Inspiron Laptop. Everything tested works fine including wifi and wifi printing.
I was able to compile the NVIDIA-Linux-x86-290.10.run after first removing the nouveau driver which is always a problem. Incidentally, sys-info reports that the vesa driver is being used regardless of driver used.
Hope that you will reinstate the ability to chose Numlock state in Personalize Settings.
Posting from laptop.
Cheers,
Jim
Wow, that was a quick update. Frugal installations on my main desktop and my Dell Inspiron Laptop. Everything tested works fine including wifi and wifi printing.
I was able to compile the NVIDIA-Linux-x86-290.10.run after first removing the nouveau driver which is always a problem. Incidentally, sys-info reports that the vesa driver is being used regardless of driver used.
Hope that you will reinstate the ability to chose Numlock state in Personalize Settings.
Posting from laptop.
Cheers,
Jim
- Attachments
-
- image-1.jpg
- Image is of desktop on main desktop computer.
- (53.9 KiB) Downloaded 1262 times
Much better. Live pfix=ram. Booted to the correct desktop with working sound and internet.
# report-video
VIDEO REPORT: Slacko Puppy, version 5.3.1.2
Chip description:
oem: NVIDIA
product: MCP61 - mcp61-86 Chip Rev
Driver used by Xorg:
nouveau
Video mode used by Xorg:
Resolution: "1366x768" Depth: Depth 24
...the above also recorded in /tmp/report-video
-Computer-
Processor : 4x AMD Athlon(tm) II X4 620 Processor
Memory : 2854MB (158MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Mon 16 Jan 2012 12:26:24 PM CST
-Display-
Resolution : 1366x768 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : HDA-Intel - HDA NVidia
Audio device : nVidia Corporation MCP61 High Definition Audio
Bridge : nVidia Corporation MCP61 Ethernet
VGA compatible controller : nVidia Corporation C61 [GeForce 7025 / nForce 630a]
# report-video
VIDEO REPORT: Slacko Puppy, version 5.3.1.2
Chip description:
oem: NVIDIA
product: MCP61 - mcp61-86 Chip Rev
Driver used by Xorg:
nouveau
Video mode used by Xorg:
Resolution: "1366x768" Depth: Depth 24
...the above also recorded in /tmp/report-video
-Computer-
Processor : 4x AMD Athlon(tm) II X4 620 Processor
Memory : 2854MB (158MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Mon 16 Jan 2012 12:26:24 PM CST
-Display-
Resolution : 1366x768 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : HDA-Intel - HDA NVidia
Audio device : nVidia Corporation MCP61 High Definition Audio
Bridge : nVidia Corporation MCP61 Ethernet
VGA compatible controller : nVidia Corporation C61 [GeForce 7025 / nForce 630a]