Success porting Openshot video editor to puppy.
Yes, I am able to do all that here. Check the screenshots attached. If you don't mind, I can upload the needed libs so that you can test them. I bet the original ones might have been overwritten by new ones probably from other programs you installed later. I encountered the same situation when I installed gimp (lupu version). libx264 got overwritten and I had to revert back to my original one before openshot could start.
Anyway, let me know what you think.
Cheers.
Anyway, let me know what you think.
Cheers.
- Attachments
-
- testing mp4 export2.png
- (110.51 KiB) Downloaded 940 times
-
- testing mp4 export1.png
- (145.92 KiB) Downloaded 875 times
still with the original faulty install i find i am able to export mp4 by choosing mp2 audio codec in the advanced tab.
transcorder installed in lupu500 does some things but not others. ttuxxx says he will do 28kb compatible versions of transcoder if asked. see transcoder thread above.
i have what i need so will not continue testing the problem of variant elusive libmp3lame.
it also seems i should be aiming at ogg and ditching mp4 to be PC.
transcorder installed in lupu500 does some things but not others. ttuxxx says he will do 28kb compatible versions of transcoder if asked. see transcoder thread above.
i have what i need so will not continue testing the problem of variant elusive libmp3lame.
it also seems i should be aiming at ogg and ditching mp4 to be PC.
tell me if this happens for you too.
import mp4, put it in a track, export to ogg theora. fine no problem.
then import the ogg theora to a new workspace put it in a track then export it to ogg theora or even just preview it. does it produce a multicolored pixilated screen that changes i.e, not your original video images at all.
import mp4, put it in a track, export to ogg theora. fine no problem.
then import the ogg theora to a new workspace put it in a track then export it to ogg theora or even just preview it. does it produce a multicolored pixilated screen that changes i.e, not your original video images at all.
I did all that but there was no problem playing back, previewing or re-exporting ogg theora files.Obviously, something must be wrong at your end. Nevertheless, let me know if I can do anything to help.tell me if this happens for you too.
import mp4, put it in a track, export to ogg theora. fine no problem.
then import the ogg theora to a new workspace put it in a track then export it to ogg theora or even just preview it. does it produce a multicolored pixilated screen that changes i.e, not your original video images at all.
Cheers.
smil99 wrote:I did all that but there was no problem playing back, previewing or re-exporting ogg theora files.Obviously, something must be wrong at your end. Nevertheless, let me know if I can do anything to help.tell me if this happens for you too.
import mp4, put it in a track, export to ogg theora. fine no problem.
then import the ogg theora to a new workspace put it in a track then export it to ogg theora or even just preview it. does it produce a multicolored pixilated screen that changes i.e, not your original video images at all.
Cheers.
thanks smill99. something strange going on. going to look in the openshot forum for ideas and tips.
I'm using Wary 030, but guess it's the same in Quirky, and the devx sfs ships python 2.6.4.
Wouldn't be possible to have it compiled for that version of python rather than 2.5.2?
Also an openshot SFS to work along with devx one would be a good thing since the use of a Video editor is not in a dayly basis (nor weekly) for most users.
Tips?
Wouldn't be possible to have it compiled for that version of python rather than 2.5.2?
Also an openshot SFS to work along with devx one would be a good thing since the use of a Video editor is not in a dayly basis (nor weekly) for most users.
Tips?
enhu writes:
This includes all the dependencies so you don't need to add anything from here.
Cheers.
Yes, it works fairly well in Lucid Puppy. You can now download it from Puppy Linux Newshas anyone made it to work in lucid pup?
This includes all the dependencies so you don't need to add anything from here.
Cheers.
Openshot-1.2.2 available for luci-233
Openshot-1.2.2 is now available for luci-maverick testing series. Might also work in luci 5.1 final version.
Download from here:
Openshot-1.2.2-Lucid.pet
Although this version is supposed to hook up with an installed Blender-2.54 for the new 3D-animation titles rendering, I couldn't make it work. Other than that, it works quite well.
Note:
Below is the error I reported in the Openshot forum and the reply I got from Jonathan, the developer of Openshot.
Cheers.
Download from here:
Openshot-1.2.2-Lucid.pet
Although this version is supposed to hook up with an installed Blender-2.54 for the new 3D-animation titles rendering, I couldn't make it work. Other than that, it works quite well.
Note:
Below is the error I reported in the Openshot forum and the reply I got from Jonathan, the developer of Openshot.
Jonathan's response:# openshot
Added /usr/share/openshot to system path
--------------------------------
OpenShot (version 1.2.2)
--------------------------------
Process no longer exists: 19431. Creating new pid lock file.
socket(): Address family not supported by protocol
state saved
on_mnu3dTitle_activate called with self.GtkImageMenuItem
on_treeTemplates_button_release_event
Traceback (most recent call last):
File "/usr/share/openshot/windows/BlenderGenerator.py", line 229, in on_treeTemplates_button_release_event
self.params[param.name] = [color.red_float, color.green_float, color.blue_float]
AttributeError: 'gtk.gdk.Color' object has no attribute 'red_float'
on_btnRender_clicked
Done with Render() method
Any clues about the GTK error?@smil99,
That error is caused by using an older version of pyGTK / GTK. This was the same error I got while trying to test on Ubuntu 9.04. To use version 1.2.2 (with the Blender integration) you must have GTK version 2.18 or greater.
Thanks,
-Jonathan.
Cheers.
What do you mean "any clues"? He told you that you need a newer GTK.
Do you know a good gtkdialog program? Please post a link here
Classic Puppy quotes
ROOT FOREVER
GTK2 FOREVER
Classic Puppy quotes
ROOT FOREVER
GTK2 FOREVER
- Lobster
- Official Crustacean
- Posts: 15522
- Joined: Wed 04 May 2005, 06:06
- Location: Paradox Realm
- Contact:
Thanks smil99, that is where I am using it with enjoyment.Openshot-1.2.2 is now available for luci-maverick testing series.
Openshot is not yet completely stable but very easy to use.
A cheap portable video camera and some time editing . . .
and you have your own film making resources
http://www.youtube.com/user/crustylobster
Sorry, no. You're using "luci-maverick". I don't know exactly what that means, but I imagine it does have a new enough GTK. So you probably need a newer Py-GTK, which was his other suggestion. See if you can find a newer version on the forum; I think I saw a reasonably recent .pet. Or maybe try a package from Ubuntu or whatever it is that luci-maverick is based on.smil99 wrote:@discipleYes. I mean how do we implement a newer GTK (or parts thereof) in puppy so as to overcome this problem?What do you mean "any clues"? He told you that you need a newer GTK
Sorry my earlier post wasn't explicit enough.
Cheers.
Do you know a good gtkdialog program? Please post a link here
Classic Puppy quotes
ROOT FOREVER
GTK2 FOREVER
Classic Puppy quotes
ROOT FOREVER
GTK2 FOREVER
Exactly. I am still searching. One thing though, Openshot is very sensitive to changes in these py files. I tried changing the one I bundled with the Openshot pet and it opened up many new cans of worms like requesting for newer versions of ffmpeg and its associated libs. So I had to revert back to what works for now.So you probably need a newer Py-GTK
It is the same luci-233 under testing now. It is indeed interesting how we are still sticking to the name "Luci or lupu" whilst luci-233 is based mostly on Ubuntu Maverick binaries.You're using "luci-maverick". I don't know exactly what that means
Perhaps "Mapu" sounds more appropriate.
Just a thought.
Cheers.
Re: Openshot-1.2.2 available for luci-233
Graciassmil99 wrote:Openshot-1.2.2 is now available for luci-maverick testing series. Might also work in luci 5.1 final version.
Download from here:
Openshot-1.2.2-Lucid.pet
thanks
Openshot-1.3 is out
Openshot 1.3 is out and it is working at my end in luci252. I made some modifications to /usr/share/openshot/windows/BlenderGenerator.py (from line 285) and /usr/share/openshot/windows/MainGTK.py (from line 1466) and Openshot now seems to work ok. These were done so as to have Blender work seamlessly with Openshot. You may therefore hook it up with Blender2.56 if you want 3D titles.
Give it a spin and let me know how it goes.
Openshot-1.3
Install this new python also:
Python2.6
Note: This has been tested only in luci252.
Cheers.
Give it a spin and let me know how it goes.
Openshot-1.3
Install this new python also:
Python2.6
Note: This has been tested only in luci252.
Cheers.
Python library files missing
Downloaded python from pet package manager. How do I update the python library files that are missing?
Nilsbird
Nilsbird