Guy Dog 5.0.1
Rollin' with Aqualung.
I have found that right-clicking an app in the task bar closes it. Is that the intended behavior? Also how do I switch between desktops?
I have found that right-clicking an app in the task bar closes it. Is that the intended behavior? Also how do I switch between desktops?
- Attachments
-
- guide600.jpg
- (53.8 KiB) Downloaded 2651 times
[b]Tahr Pup 6 on desktop, Lucid 3HD on lappie[/b]
Hi Iguleder
Looks and feels nice -
manual frugal to ext3 sda1
8/9yr old Acer TravelMate 243LC
256mb ram. 2.5Ghz Celeron proc. 800mb swap partition.
Even Firefox runs well - (unusual recently)
Not sure the firewall is working here.
Anyway - many thanks for all you do for us - luvly puppy.
Very best regards - Ray
Looks and feels nice -
manual frugal to ext3 sda1
8/9yr old Acer TravelMate 243LC
256mb ram. 2.5Ghz Celeron proc. 800mb swap partition.
Even Firefox runs well - (unusual recently)
Not sure the firewall is working here.
Anyway - many thanks for all you do for us - luvly puppy.
Very best regards - Ray
I have mirrored here:puppyiso wrote:Everybodyelse got it. I should call up the internet service company tomorrow morning.
http://tubeguy.org/puppybg/iso/guydog-5.0.0.iso
[b]Tahr Pup 6 on desktop, Lucid 3HD on lappie[/b]
Guy Dog 5.0.0
Manual frugal install to acer desktop pc.
Sat 15 Oct 2011 Operating System: Guy Dog-5.0.0 Linux 2.6.39
0.0 VGA compatible controller: nVidia Corporation C77 [GeForce 8200]
(rev a2) 0.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9300 GE] (rev a1)
oem: NVIDIA product: MCP77 Board - mcp78pvo Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.10.4
dimensions: 1280x1024 pixels (382x302 millimeters)
depth of root window: 24 planes
Athlon(tm) Dual Core Processor 4850e
Core 0: 2499 1: 2499 MHz
Sat 15 Oct 2011 Operating System: Guy Dog-5.0.0 Linux 2.6.39
0.0 VGA compatible controller: nVidia Corporation C77 [GeForce 8200]
(rev a2) 0.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9300 GE] (rev a1)
oem: NVIDIA product: MCP77 Board - mcp78pvo Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.10.4
dimensions: 1280x1024 pixels (382x302 millimeters)
depth of root window: 24 planes
Athlon(tm) Dual Core Processor 4850e
Core 0: 2499 1: 2499 MHz
Testing.....testing....now. Looks good so far. Some quick notes. Pupcamera would need gphoto2 and some other stuff to work from menu. Easily fixed though. Delayedrun script still calls 10.X flash player. If you want to use 11.X flash, the script needs some editing for download location. I changed it in Exprimo 5.X.8.
Wm compo looks good and works also. New X works great. Touchpad configuring with flsynclient works.
This looks like new era in small size Puppies world.
Thanks Iguleder !
Wm compo looks good and works also. New X works great. Touchpad configuring with flsynclient works.
This looks like new era in small size Puppies world.
Thanks Iguleder !
Testing GuyDog on a fresh frugal install.
- Xorgwizard would not properly probe my onboard nvidia on bootup.
Manually tried the nv driver, which did not work. Managed to get to the graphical desktop using the Vesa driver. The new look is nice.,
Pets from my hard-drive would not install when I left-clicked on them in emelFM2. Same problem in Nextpup. Lucky I knew about the Open With "petget" command and was able to install pets that way.
- I wish to add drive icons back to the desktop but don't know how, can someone out there help me with this?
[quote="Iguleder"]Guy Dog tries lead the way and show “blind
- Xorgwizard would not properly probe my onboard nvidia on bootup.
Manually tried the nv driver, which did not work. Managed to get to the graphical desktop using the Vesa driver. The new look is nice.,
Pets from my hard-drive would not install when I left-clicked on them in emelFM2. Same problem in Nextpup. Lucky I knew about the Open With "petget" command and was able to install pets that way.
- I wish to add drive icons back to the desktop but don't know how, can someone out there help me with this?
[quote="Iguleder"]Guy Dog tries lead the way and show “blind
Last edited by Tman on Sat 15 Oct 2011, 20:02, edited 1 time in total.
@Tman
http://www.murga-linux.com/puppy/viewtopic.php?t=69830
How about using Idrivepanel-demo- I wish to add drive icons back to the desktop but don't know how, can someone out there help me with this?
http://www.murga-linux.com/puppy/viewtopic.php?t=69830
3.01 Fat Free / Fire Hydrant featherweight/ TXZ_pup / 431JP2012
----------------------------------------------------------------------------------------
Peace and Justice are two sides of the same coin.
----------------------------------------------------------------------------------------
Peace and Justice are two sides of the same coin.
-
- Posts: 26
- Joined: Mon 19 Jul 2010, 20:02
It is, but you can change it. The setting is at line 83 in /root/.config/tint2/tint2rc, "mouse_right = close". The available settings are explained at the link below.tubeguy wrote:I have found that right-clicking an app in the task bar closes it. Is that the intended behavior?
http://code.google.com/p/tint2/wiki/Configure#Mouse_action_on_task
Ctrl-Alt-Left Arrow or Right Arrow or scrolling on the desktop are two ways.tubeguy wrote:Also how do I switch between desktops?
I tried the pet, but it didn't work in Guy Dog. Thanks for the suggestion.harii4 wrote: How about using Idrivepanel-demo
http://www.murga-linux.com/puppy/viewtopic.php?t=69830
Finally got ROX-Filer to work, but don't know how to change the default pinboard.
Fresh manual frugal install on my main Athlon XP linux box.Same problem as was mentioned earlier....Xorgwizard refuses to use the "nv" driver for my Nvidia card so I'm using Vesa at 1280x1024 (highest resolution allowed) instead of my desired 1440x900.
Otherwise,sound was working on initial boot and SNS made quick work of the network.Overall,looks pretty good.
On to more testing.
Otherwise,sound was working on initial boot and SNS made quick work of the network.Overall,looks pretty good.
On to more testing.
frugal manual install to ext4 pfix-=ram. sns auto-detected my broadcom wifi driver and after inputting particulars including WEP network encryption made connection without issue.
some things to find out like how to install existing pets, as noted in earlier post. seems responsive and quick but how much more so than 64 bit or all 686 os will find out over next days of testing. thanks.
some things to find out like how to install existing pets, as noted in earlier post. seems responsive and quick but how much more so than 64 bit or all 686 os will find out over next days of testing. thanks.
Hi Iguleder
Some quick feedback (manual frugal install on my HP550):
- Network Wizard doesn't seem to work at all
- sad to see that Samba hasn't been included
- really missing being able to click on a .pet file to install it and clicking on a .iso or .sfs to access the contents
Maybe somebody could do a quick tutorial explaining how to do the things we've come to expect of Puppy in this different new world for people who would like to experiment but aren't clever enough to work it out for themselves??
Really exciting what you've managed to cram into such a small ISO though - congrats.
Cheers
peebee
Some quick feedback (manual frugal install on my HP550):
- Network Wizard doesn't seem to work at all
- sad to see that Samba hasn't been included
- really missing being able to click on a .pet file to install it and clicking on a .iso or .sfs to access the contents
Maybe somebody could do a quick tutorial explaining how to do the things we've come to expect of Puppy in this different new world for people who would like to experiment but aren't clever enough to work it out for themselves??
Really exciting what you've managed to cram into such a small ISO though - congrats.
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
-
- Posts: 26
- Joined: Mon 19 Jul 2010, 20:02
See: http://bkhome.org/blog/?viewDetailed=02544peebee wrote:- Network Wizard doesn't seem to work at all
New pet: http://distro.ibiblio.org/quirky/pet_pa ... 111015.pet
- Iguleder
- Posts: 2026
- Joined: Tue 11 Aug 2009, 09:36
- Location: Israel, somewhere in the beautiful desert
- Contact:
Any Puppy wallpaper setter should work - put your wallpaper in either /usr/share/backgrounds/default.jpg or /usr/share/backgrounds/default.png. This is something I want to address in the next release.
[url=http://dimakrasner.com/]My homepage[/url]
[url=https://github.com/dimkr]My GitHub profile[/url]
[url=https://github.com/dimkr]My GitHub profile[/url]