Precord0.9.5 audio recorder
Precord 8.0.2 released. Now internationalised.
It is advised to remove all traces of previous precord versions before installing this, though it probably doesn't matter.
Version 8.0.2 released. Dotpet in first post of this thread.
# Changes: Now Internationalised.
Please test, and upload translations to this thread.
Note: I don't want to change the interface size if possible. So if necessary, please abbreviate your translations to fit.
EDIT: Sorry, just discovered an introduced bug. I'll re-upload once I sort that out.
Version 8.0.2 released. Dotpet in first post of this thread.
# Changes: Now Internationalised.
Please test, and upload translations to this thread.
Note: I don't want to change the interface size if possible. So if necessary, please abbreviate your translations to fit.
EDIT: Sorry, just discovered an introduced bug. I'll re-upload once I sort that out.
github mcewanw
Precord 8.0.2 released. Internationalised. Fixed/re-uploaded
'Fixed' and re-uploaded
Version 8.0.2 released. Download from first post in this thread.
It is advised to remove all traces of previous precord versions before installing new ones, though it probably doesn't matter.
# Changes: Now Internationalised.
Please test, and upload translations to this thread.
Been lots of changes underneath so reports of it working/malfunctioning would be appreciated.
Version 8.0.2 released. Download from first post in this thread.
It is advised to remove all traces of previous precord versions before installing new ones, though it probably doesn't matter.
# Changes: Now Internationalised.
Please test, and upload translations to this thread.
Been lots of changes underneath so reports of it working/malfunctioning would be appreciated.
github mcewanw
- plankenstein
- Posts: 120
- Joined: Sun 16 Nov 2008, 00:49
- Location: Arkansas, USA
Precord 8.0.3 released. Internationalised
Version 8.0.3 released. Download from first post in this thread.
It is advised to remove all traces of previous precord versions before installing new ones, though it probably doesn't matter.
# Changes: Just a small change from 8.0.2: I shortened the play stop button response time.
Now Internationalised.
Please test, and upload translations to this thread.
Been lots of changes underneath recently so reports of it working/malfunctioning would be appreciated.
It is advised to remove all traces of previous precord versions before installing new ones, though it probably doesn't matter.
# Changes: Just a small change from 8.0.2: I shortened the play stop button response time.
Now Internationalised.
Please test, and upload translations to this thread.
Been lots of changes underneath recently so reports of it working/malfunctioning would be appreciated.
github mcewanw
ça ne marche pas avec Slacko 5.3.3
Although capture set in alsamixer, precord records nothing at all, but this tool works well in lucid and racy.
I think the problem is not Precord, but Slacko.
Obviously, XVIDCAP does not record too. I was trying precord to test.
I test Precord 8.0.3 with Lucid 5.2.8 and I come back to inform you.
Precord runs on Slacko 5.3.3 XFCE : 2014 with specific version for Slacko
Have a nice week-end
I think the problem is not Precord, but Slacko.
Obviously, XVIDCAP does not record too. I was trying precord to test.
I test Precord 8.0.3 with Lucid 5.2.8 and I come back to inform you.
Precord runs on Slacko 5.3.3 XFCE : 2014 with specific version for Slacko
Have a nice week-end
- Attachments
-
- 814.jpg
- Settings by default
- (53.72 KiB) Downloaded 297 times
Last edited by Pelo on Sat 05 Apr 2014, 08:30, edited 2 times in total.
precord 8.03 works in macpup (based on lucid 5.2.8)
precord 8.03 works in macpup (based on lucid 5.2., Not with Slacko 5.3.3.
what should be the reason ?
Nevertheless, i thing that a recording tool must be present on any computer.
I have definitively trashed Slacko 5.3.3. Previous versions were safer.
what should be the reason ?
Nevertheless, i thing that a recording tool must be present on any computer.
I have definitively trashed Slacko 5.3.3. Previous versions were safer.
Pelo, could you check the post here:
http://www.murga-linux.com/puppy/viewto ... 486#650486
That post was really about problems with flash, nevertheless your problem in Slacko may also be something to do with the wrong sound module or modules being detected and loaded by Slacko. I'm just curious if you could try these commands from that link post whilst in Slacko and then try Precord there again. Easiest way to set up Precord, after trying the commands from that link, is to press the Mixer button in Precord big GUI and make sure you have the Capture control turned high in Retrovol and have your Mic selected and Mic boost selected and also select and turn up PCM and the Master volume. All going well, the alsa VU rxvt display will verify that your Mic is working (or not). Glad to hear things are fine in your Lucid (Macpup) installation at least though.
On my old machine at home, Wary actually gave the least problems with alsa sound, but Slacko worked well for me after running the commands given in the above link. I imagine it all depends on your machine's hardware and most people probably have alsa sound detected correctly by Slacko and working without issue.
I actually used Slacko-5.3.3 for most of the development work in the most recent Precord release, and I'm using Slacko at the moment and Precord is working fine on my machine. I also have Lucid 5.2.8 and Wary 5.3 on this same machine, and I use them all pretty much equally and also for testing Precord.
EDIT: I forgot to suggest you first try simply re-initialising alsa on your Slacko system by running the command alsaconf from a console. Precord is, I'm sure you understand, just a frontend for controlling primarily the alsa sound processes arecord and aplay as well as ffmpeg. Precord won't work if your soundcard isn't being detected correctly such that the underlying alsa system is working. And the mixer controls also have to be set up correctly before recording.
Slacko-5.3.3 does come with the program mhWaveEdit (under submenu Multimedia) which can Record audio (click on its Play menu to find Record...). That has a nice active VU meter which may help you verify if your underlying sound system is functioning.
http://www.murga-linux.com/puppy/viewto ... 486#650486
That post was really about problems with flash, nevertheless your problem in Slacko may also be something to do with the wrong sound module or modules being detected and loaded by Slacko. I'm just curious if you could try these commands from that link post whilst in Slacko and then try Precord there again. Easiest way to set up Precord, after trying the commands from that link, is to press the Mixer button in Precord big GUI and make sure you have the Capture control turned high in Retrovol and have your Mic selected and Mic boost selected and also select and turn up PCM and the Master volume. All going well, the alsa VU rxvt display will verify that your Mic is working (or not). Glad to hear things are fine in your Lucid (Macpup) installation at least though.
On my old machine at home, Wary actually gave the least problems with alsa sound, but Slacko worked well for me after running the commands given in the above link. I imagine it all depends on your machine's hardware and most people probably have alsa sound detected correctly by Slacko and working without issue.
I actually used Slacko-5.3.3 for most of the development work in the most recent Precord release, and I'm using Slacko at the moment and Precord is working fine on my machine. I also have Lucid 5.2.8 and Wary 5.3 on this same machine, and I use them all pretty much equally and also for testing Precord.
EDIT: I forgot to suggest you first try simply re-initialising alsa on your Slacko system by running the command alsaconf from a console. Precord is, I'm sure you understand, just a frontend for controlling primarily the alsa sound processes arecord and aplay as well as ffmpeg. Precord won't work if your soundcard isn't being detected correctly such that the underlying alsa system is working. And the mixer controls also have to be set up correctly before recording.
Slacko-5.3.3 does come with the program mhWaveEdit (under submenu Multimedia) which can Record audio (click on its Play menu to find Record...). That has a nice active VU meter which may help you verify if your underlying sound system is functioning.
github mcewanw
Precord Version 8.0.4 released.
Precord Version 8.0.4 released. Download from first post in this thread.
Tested on Slacko-5.3.3, Lupu-5.2.8 and Wary 5.3 (I'm currently downloading Precise to try it there too - should be fine...)
No further features planned for the moment. Just bug fixing this one. Been significant changes with this "final" so all testing and bug reports appreciated. No bugs known as yet... NOTE WELL:
Definitely remove all traces of previous precord versions before installing this. Once you remove previous installation using petget package manager you must also delete the hidden config file /root/.precord or the new precord won't start. This version has new variables which aren't in the previous config file. If ever precord fails to start just delete that config directory and the new config directory will auto rebuild next time you run precord after which all should be fine...
Tested on Slacko-5.3.3, Lupu-5.2.8 and Wary 5.3 (I'm currently downloading Precise to try it there too - should be fine...)
No further features planned for the moment. Just bug fixing this one. Been significant changes with this "final" so all testing and bug reports appreciated. No bugs known as yet... NOTE WELL:
Definitely remove all traces of previous precord versions before installing this. Once you remove previous installation using petget package manager you must also delete the hidden config file /root/.precord or the new precord won't start. This version has new variables which aren't in the previous config file. If ever precord fails to start just delete that config directory and the new config directory will auto rebuild next time you run precord after which all should be fine...
github mcewanw
Precord Version 8.0.5 released.
Version 8.0.5 released: More logical drag and drop facility:
File entry takes precedence over Directory entry on filepath decision. Tidied up some of the code. NOTE WELL:
Definitely remove all traces of previous precord versions before installing this. Once you remove previous installation using petget package manager you must also delete the hidden config file /root/.precord or the new precord won't start. This version has new variables which aren't in the previous config file. If ever precord fails to start just delete that config directory and the new config directory will auto rebuild next time you run precord after which all should be fine...
File entry takes precedence over Directory entry on filepath decision. Tidied up some of the code. NOTE WELL:
Definitely remove all traces of previous precord versions before installing this. Once you remove previous installation using petget package manager you must also delete the hidden config file /root/.precord or the new precord won't start. This version has new variables which aren't in the previous config file. If ever precord fails to start just delete that config directory and the new config directory will auto rebuild next time you run precord after which all should be fine...
github mcewanw
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
Re: Precord mp3,wav,ogg recorder/player version 8.0.5 released
tested in puppy precise 5.3.93mcewanw wrote:...Version 8.0.2 released.
# Changes: Now Internationalised.
Please test, and upload translations to this thread....
fixed helpsetup using version 8.0.5-->8.0.6
Attached /usr/bin/precord-8.0.6 and
german translation which is far away from being perfect
- Attachments
-
- precord.gz
- version 8.0.6
/usr/bin/precord - (39.2 KiB) Downloaded 616 times
-
- MoManager-de_DE-precord-8.0.6.tar.gz
- contains just
/usr/share/locale/de/LC_MESSAGES/precord.mo - (4.55 KiB) Downloaded 589 times
@L18L: thanks for that. I hadn't tested that the gettexts all worked. I had already almost completed version 8.0.6 (for other reasons) so I modified the helptext so that it can now be internationalised too.
The main problem actually was that I had failed to escape a few single quotes, which was mucking up gettext operation. I have therefore modified the help text slightly to fix that. I also split the printf statements into smaller parts of around ten lines each as an aid to the translators. Hope your earlier translation is easy to modify for the new precord version.
The main problem actually was that I had failed to escape a few single quotes, which was mucking up gettext operation. I have therefore modified the help text slightly to fix that. I also split the printf statements into smaller parts of around ten lines each as an aid to the translators. Hope your earlier translation is easy to modify for the new precord version.
github mcewanw
Precord mp3,wav,ogg recorder/player version 8.0.6 released
Version 8.0.6: Rearranged the small GUI such that the rec/play buttons come first. That way the small GUI can be dragged part way off the right hand side of the screen and still be operatable.
Fixed helpsetup for internationalisation (thanks L18L for the pointer).
To take up the least real estate possible, when in small GUI mode you can now drag precord off the right hand screen edge so only rec, pause and stop buttons are visible. Only occupies around 100pixels wide that way. I often right click its menu bar and put precord as Layer Top, when browsing or using it to record skype conversations. Hence my wish to minimise the screen realestate needed for operation. For example, note that Precord is simply the three buttons at the very top right of the screen capture at the foot of this post:
NOTE WELL:
To be sure the new version will start, prior to installation you should definitely delete any pre-existing hidden config file /root/.precord (glad it ran okay for you anyway Flash). This version has new variables which aren't in the config file of some earlier versions. If ever precord fails to start just delete that config directory and the new config directory will auto rebuild next time you run precord after which all should be fine...
Fixed helpsetup for internationalisation (thanks L18L for the pointer).
To take up the least real estate possible, when in small GUI mode you can now drag precord off the right hand screen edge so only rec, pause and stop buttons are visible. Only occupies around 100pixels wide that way. I often right click its menu bar and put precord as Layer Top, when browsing or using it to record skype conversations. Hence my wish to minimise the screen realestate needed for operation. For example, note that Precord is simply the three buttons at the very top right of the screen capture at the foot of this post:
NOTE WELL:
To be sure the new version will start, prior to installation you should definitely delete any pre-existing hidden config file /root/.precord (glad it ran okay for you anyway Flash). This version has new variables which aren't in the config file of some earlier versions. If ever precord fails to start just delete that config directory and the new config directory will auto rebuild next time you run precord after which all should be fine...
- Attachments
-
- UsingTinyPrecord.jpg
- Using precord as Layer Top whilst skyping
- (56.31 KiB) Downloaded 810 times
github mcewanw
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
helpsetup
try to delete each "printf " after the first onemcewanw wrote:... I also split the printf statements into smaller parts of around ten lines each as an aid to the translators. ...
and the help is displayed in its entire length
Re: helpsetup
Yes. I know that! :-)L18L wrote:try to delete each "printf " after the first onemcewanw wrote:... I also split the printf statements into smaller parts of around ten lines each as an aid to the translators. ...
and the help is displayed in its entire length :wink:
I split it in purpose per the offiicial guidelines of gnu.org gettext documentation/manual, section 4.3 Preparing Translatable Strings
Please refer to: http://www.gnu.org/software/gettext/man ... ranslators
EDIT: @L18L: Please note that version 8.0.7 is released. It includes a change to STOP RECORD button functionality so also includes one small change to a gettext string also (the STOP RECORD label).gnu.org wrote: Translatable strings should be limited to one paragraph; don't let a single message be longer than ten lines. The reason is that when the translatable string changes, the translator is faced with the task of updating the entire translated string. Maybe only a single word will have changed in the English string, but the translator doesn't see that (with the current translation tools), therefore she has to proofread the entire message.
Many GNU programs have a ‘--help’ output that extends over several screen pages. It is a courtesy towards the translators to split such a message into several ones of five to ten lines each.
Last edited by mcewanw on Wed 26 Sep 2012, 00:36, edited 1 time in total.
github mcewanw
Precord mp3,wav,ogg recorder/player version 8.0.7 released
Download at first post.
# Changes:
Version 8.0.7: Record stop button opens mixer/vu if not recording.
Useful in small GUI (which has no mixer button per se) since adjusting mixer so crucial to good recordings.
Version 8.0.6: Rearranged the small GUI such that the rec/play buttons come first. That way the small GUI can be dragged part way off the right hand side of the screen and still be operatable.
Fixed helpsetup for internationalisation.
NOTE WELL:
To be sure the newest version will start, prior to installation you should definitely delete any pre-existing hidden config file /root/.precord (glad it ran okay for you anyway Flash). This version has new variables which aren't in the config file of some earlier versions. If ever precord fails to start just delete that config directory and the new config directory will auto rebuild next time you run precord after which all should be fine...
# Changes:
Version 8.0.7: Record stop button opens mixer/vu if not recording.
Useful in small GUI (which has no mixer button per se) since adjusting mixer so crucial to good recordings.
Version 8.0.6: Rearranged the small GUI such that the rec/play buttons come first. That way the small GUI can be dragged part way off the right hand side of the screen and still be operatable.
Fixed helpsetup for internationalisation.
NOTE WELL:
To be sure the newest version will start, prior to installation you should definitely delete any pre-existing hidden config file /root/.precord (glad it ran okay for you anyway Flash). This version has new variables which aren't in the config file of some earlier versions. If ever precord fails to start just delete that config directory and the new config directory will auto rebuild next time you run precord after which all should be fine...
github mcewanw
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
Re: helpsetup
Every change is handled by momanager, no problem.mcewanw wrote:...
EDIT: @L18L: Please note that version 8.0.7 is released. It includes a change to STOP RECORD button functionality so also includes one small change to a gettext string also (the STOP RECORD label).
May be this code snippet can explain better howto display the entire precord setup help, and fix it
Code: Select all
sed -i 's#"printf "##' /usr/bin/precord
- Attachments
-
- precord_help_en.png
- before applying above fix
- (18.75 KiB) Downloaded 882 times
Re: helpsetup
Hahaha touchéL18L wrote:mcewanw wrote:...
May be this code snippet can explain better howto display the entire precord setup help, and fix it :wink:
Code: Select all
sed -i 's#"printf "##' /usr/bin/precord
But what do you expect when I am coding whilst in full care of a screaming 8 month baby boy... I admit, I didn't look at the help to check it, bad me, just quickly looked at the pot. I'll release 8.0.8 tomorrow then... sigh. It's one in the morning here - long past my bedtime.
github mcewanw
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
Re: helpsetup
Sorrymcewanw wrote: touché.
Here to help
Precord version 8.0.8 released
# Changes:
Version 8.0.8: Version 8.0.8: Fixed pause date-stamped record. Fixed help text.
Version 8.0.7: Record stop button opens mixer/vu if not recording.
Useful in small GUI (which has no mixer button per se) since adjusting mixer so crucial to good recordings.
Version 8.0.6: Rearranged the small GUI such that the rec/play buttons come first. That way the small GUI can be dragged part way off the right hand side of the screen and still be operatable.
Fixed helpsetup for internationalisation.
NOTE WELL:
To be sure the newest version will start, prior to installation you should definitely delete any pre-existing hidden config file /root/.precord (glad it ran okay for you anyway Flash). This version has new variables which aren't in the config file of some earlier versions. If ever precord fails to start just delete that config directory and the new config directory will auto rebuild next time you run precord after which all should be fine...
Version 8.0.5: More logical drag and drop facility:
File entry takes precedence over Directory entry on filepath decision. Tidied up some of the code.
Version 8.0.8: Version 8.0.8: Fixed pause date-stamped record. Fixed help text.
Version 8.0.7: Record stop button opens mixer/vu if not recording.
Useful in small GUI (which has no mixer button per se) since adjusting mixer so crucial to good recordings.
Version 8.0.6: Rearranged the small GUI such that the rec/play buttons come first. That way the small GUI can be dragged part way off the right hand side of the screen and still be operatable.
Fixed helpsetup for internationalisation.
NOTE WELL:
To be sure the newest version will start, prior to installation you should definitely delete any pre-existing hidden config file /root/.precord (glad it ran okay for you anyway Flash). This version has new variables which aren't in the config file of some earlier versions. If ever precord fails to start just delete that config directory and the new config directory will auto rebuild next time you run precord after which all should be fine...
Version 8.0.5: More logical drag and drop facility:
File entry takes precedence over Directory entry on filepath decision. Tidied up some of the code.
github mcewanw