Hello
Has anyone got zenialpup running on an Intel Atom z8350 processor. I would like to get a ASUS VivoBook E200 laptop that has an atom z8350 processor, 2gb ram and 32gb ssd running windows 10. Would the processor be a problem and would I be able to partition the ssd to install zenialpup, preferably 64 bit.
Any help appreciated.
number77
Zenialpup on an Intel z8350. Will it work.(Solved)
Zenialpup on an Intel z8350. Will it work.(Solved)
Last edited by number77 on Sat 28 Jul 2018, 16:41, edited 2 times in total.
Xenialpup64 7.5 should work OK on that processor.
I would install it to a USB flash drive, and try it, before doing an install to the SSD.
The Lick installer may be of interest to doing the install to SSD.
http://murga-linux.com/puppy/viewtopic.php?t=61404
I would install it to a USB flash drive, and try it, before doing an install to the SSD.
The Lick installer may be of interest to doing the install to SSD.
http://murga-linux.com/puppy/viewtopic.php?t=61404
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
Thanks bigpup, I haven't bought the laptop yet and wanted to know if Xenialpup would work. The Lick installer looks most interesting.bigpup wrote:Xenialpup64 7.5 should work OK on that processor.
I would install it to a USB flash drive, and try it, before doing an install to the SSD.
The Lick installer may be of interest to doing the install to SSD.
http://murga-linux.com/puppy/viewtopic.php?t=61404
Laptop touchpads are the only thing that is hard to make work in every possible laptop.
You may need to do some tweaking to get the touchpad working correctly.
Settings, need a driver, etc.....
However, a mouse plugged into the laptop should just work.
You may need to do some tweaking to get the touchpad working correctly.
Settings, need a driver, etc.....
However, a mouse plugged into the laptop should just work.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
I have rather given up the atom z8350 as a cpu as everyone seems to have trouble with linux and I am not advanced enough, the same with a chromebook, even more. I do need a touchpad as it is to replace a tablet and would need me to carry a mouse as well.bigpup wrote:Laptop touchpads are the only thing that is hard to make work in every possible laptop.
You may need to do some tweaking to get the touchpad working correctly.
Settings, need a driver, etc.....
However, a mouse plugged into the laptop should just work.
How about a Lenovo Ideapad 120s running win 10 with an intel celeron n 3350. I would eventually delete win 10 and run xenialpup. At first with Lick installer you mentioned, dual boot.
Any ideas on that possibility.
Booting Lenovo from a USB-port
I haven't done a full search. But I figured you should be aware of this post: https://forums.lenovo.com/t5/Lenovo-Ide ... -p/3788179
I just obtained a Lenovo T40 and had the devil of a time attempting to get it too boot from a USB port. The above is not how to do it on the T420.
mikesLr
I just obtained a Lenovo T40 and had the devil of a time attempting to get it too boot from a USB port. The above is not how to do it on the T420.
mikesLr
Re: Booting Lenovo from a USB-port
That puts me off that one Mike, it seems windows 10 and chromebook laptops are similar they don't want any other system installed.mikeslr wrote:I haven't done a full search. But I figured you should be aware of this post: https://forums.lenovo.com/t5/Lenovo-Ide ... -p/3788179
I just obtained a Lenovo T40 and had the devil of a time attempting to get it too boot from a USB port. The above is not how to do it on the T420.
mikesLr