Savefile updates every couple of seconds [SOLVED]
Savefile updates every couple of seconds [SOLVED]
Hi
I'm running Precise 5.5, booted from usb, running on a reasonable desktop PC.
Nice
.. but my hard drive won't shut up. Looking in ROX at the directory where my savefile is on the hard drive and hitting refresh again and again I see the savefile is being updated at least every 2 seconds.
Htop shows plenty of spare memory.
So in Puppy Event Manager I put the save interval to 0 (never save). No change. Rebooted. No change. Put the save interval to 9999. No change. Rebooted. No change.
Any ideas? Thanks!
I'm running Precise 5.5, booted from usb, running on a reasonable desktop PC.
Nice
.. but my hard drive won't shut up. Looking in ROX at the directory where my savefile is on the hard drive and hitting refresh again and again I see the savefile is being updated at least every 2 seconds.
Htop shows plenty of spare memory.
So in Puppy Event Manager I put the save interval to 0 (never save). No change. Rebooted. No change. Put the save interval to 9999. No change. Rebooted. No change.
Any ideas? Thanks!
Last edited by Fingers on Mon 27 May 2013, 18:59, edited 1 time in total.
It's slowed down a bit, now. Still at lest evey 6 seconds. Thought I'd try ffconvert's screen capture (ooo my first video ) to show you I'm not a fibber
http://youtu.be/vnJiINHQ2WU
http://youtu.be/vnJiINHQ2WU
ZX81 > ZX Spectrum > Atari ST > Win 98 > Win 2K > Red Hat > SuSE > Ubuntu > Puppy > Fatdog64
Actually I won't (referring to my last post) because I don't know what I'm doing. I'm going out now and will look into it later. Got some learning to do with this one.
Still, if anyone can point me in the right direction, great!
Still, if anyone can point me in the right direction, great!
Last edited by Fingers on Mon 27 May 2013, 18:38, edited 1 time in total.
1. I just finished [a couple of minutes back, successfully] doing the following plus some other stuff to Precise-5.6.
I'm booting using a CD-RW with the pupsave on an internal HDD.
a. Begin with this lot.
[Do Items 4->(if your pupsave is on your internal HDD), then 1, then 2, then 3]
I like holding the pupsave on an internal HDD [it's faster than a Flash Drive], and using item 4 [in the page linked above] to have it treated as though on a Flash Drive.
b. Having completed the above, proceed to HERE to see the small code change to add to the code shown HERE.
This makes "Don't Save..." the default, when asked at shut-down whether you wish "to save or not to save".
2. The beauty of the above is that:
Session changes are only saved back to the pupsave IF and WHEN you choose.
a. During the session:
There is only a save IF/WHEN you choose to do it manually by clicking the "Save..." icon.
b. At shutdown/reboot:
You are asked whether you want "to save or not to save", and the default [click OK to accept] is "Don't save...".
I'm booting using a CD-RW with the pupsave on an internal HDD.
a. Begin with this lot.
[Do Items 4->(if your pupsave is on your internal HDD), then 1, then 2, then 3]
I like holding the pupsave on an internal HDD [it's faster than a Flash Drive], and using item 4 [in the page linked above] to have it treated as though on a Flash Drive.
b. Having completed the above, proceed to HERE to see the small code change to add to the code shown HERE.
This makes "Don't Save..." the default, when asked at shut-down whether you wish "to save or not to save".
2. The beauty of the above is that:
Session changes are only saved back to the pupsave IF and WHEN you choose.
a. During the session:
There is only a save IF/WHEN you choose to do it manually by clicking the "Save..." icon.
b. At shutdown/reboot:
You are asked whether you want "to save or not to save", and the default [click OK to accept] is "Don't save...".
Last edited by Sylvander on Mon 27 May 2013, 23:09, edited 1 time in total.
Sorted
Thanks guys.
rcrsn51, I can see that this would work but ... but .... it's lying !
I've got the time and I want to learn so I've gone for Sylvander's suggestions.
I've done: "a. Begin with this lot." items 4. (remaster with pupmode=13 in init) and 1. (Puppy Event Manager save interval=0)
... but I had this problem:
re: kleung21's post http://www.murga-linux.com/puppy/viewto ... 2239#82239 - Forcing pupmode 13 by remastering
When trying to mount initrd with 'mount ...' I got errors but got it to work with zcat instead:
mkdir /root/minit
cd /root/minit
zcat /mnt/{my usb stick where Puppy is booted from}/initrd.gz | cpio -i -d
leafpad initrc
#### In leafpad, I inserted:
#### PUPMODE=13
#### before the line:
#### case $PUPMODE in
sync
find .|cpio -o -H newc | gzip -9 > /mnt/{my usb stick where Puppy is booted from}/initrd.gz
sync
cd /root
sync
(Then I deleted the /root/minit directory)
Note: init was not in /root/minit/sbin/ - it's in /root/minit/
Thanks Bruce B for showing the zcat method.
I was about to ask why I don't have a save icon on the desktop but it's appeared as if by magic (now that I'm in pupmode 13)
This solves my hyperactive hard drive.
The other stuff is exactly what I was wanting to do next - you read my mind
Brilliant, thanks!
rcrsn51, I can see that this would work but ... but .... it's lying !
I've got the time and I want to learn so I've gone for Sylvander's suggestions.
I've done: "a. Begin with this lot." items 4. (remaster with pupmode=13 in init) and 1. (Puppy Event Manager save interval=0)
... but I had this problem:
re: kleung21's post http://www.murga-linux.com/puppy/viewto ... 2239#82239 - Forcing pupmode 13 by remastering
When trying to mount initrd with 'mount ...' I got errors but got it to work with zcat instead:
mkdir /root/minit
cd /root/minit
zcat /mnt/{my usb stick where Puppy is booted from}/initrd.gz | cpio -i -d
leafpad initrc
#### In leafpad, I inserted:
#### PUPMODE=13
#### before the line:
#### case $PUPMODE in
sync
find .|cpio -o -H newc | gzip -9 > /mnt/{my usb stick where Puppy is booted from}/initrd.gz
sync
cd /root
sync
(Then I deleted the /root/minit directory)
Note: init was not in /root/minit/sbin/ - it's in /root/minit/
Thanks Bruce B for showing the zcat method.
I was about to ask why I don't have a save icon on the desktop but it's appeared as if by magic (now that I'm in pupmode 13)
This solves my hyperactive hard drive.
The other stuff is exactly what I was wanting to do next - you read my mind
Brilliant, thanks!
All done. Awesome. Thanks again.
This will be perfect for the netbook I'm getting next week that I just want to be a word processor. I'll save my work as and when and probably rarely save the session once I get everything how I want it. This was exactly what I wanted a few days ago when I'd never even heard of Puppy Linux.
Running from RAM rocks! It's always exasperated me that no matter the incredible leaps in hardware technology the software manages to keep it pushed to the limits. Great if you're a gamer, but to do simple stuff, why have a machine that struggles? Puppy addresses this brilliantly.
Very pleased
This will be perfect for the netbook I'm getting next week that I just want to be a word processor. I'll save my work as and when and probably rarely save the session once I get everything how I want it. This was exactly what I wanted a few days ago when I'd never even heard of Puppy Linux.
Running from RAM rocks! It's always exasperated me that no matter the incredible leaps in hardware technology the software manages to keep it pushed to the limits. Great if you're a gamer, but to do simple stuff, why have a machine that struggles? Puppy addresses this brilliantly.
Very pleased
Now play with the suspend to RAM function with lid closed, and if you get into the habit of closing lid between uses, battery life can last about a week. On my 64bit notebook its about 7% per day loss of battery with lid down on fully MAXed out RAM on my older 32bit and a older version of puppy, packed it up on and had it in storage for a little over a month so I was surprised when lifting lid and puppy was is running in RAM.
- Sky Aisling
- Posts: 1368
- Joined: Sat 27 Jun 2009, 23:02
- Location: Port Townsend, WA. USA
Savefile updates every couple of seconds [SOLVED]
Ted Dog writes:
Thank you
Where is the suspend to RAM function?Now play with the suspend to RAM function with lid closed,
Thank you
Re: Savefile updates every couple of seconds [SOLVED]
Close lid, trick is how to turn suspend to RAM off... ACPI settings. Sometimes I like to download overnight and with lights off.Sky Aisling wrote:Ted Dog writes:
Where is the suspend to RAM function?Now play with the suspend to RAM function with lid closed,
Thank you