Puppy Linux Discussion Forum

Fingers · Joined: 25 May 2013 Posts: 14 Location: London, UK

Hi

I'm running Precise 5.5, booted from usb, running on a reasonable desktop PC.
Nice Very Happy

.. but my hard drive won't shut up. Looking in ROX at the directory where my savefile is on the hard drive and hitting refresh again and again I see the savefile is being updated at least every 2 seconds.

Htop shows plenty of spare memory.

So in Puppy Event Manager I put the save interval to 0 (never save). No change. Rebooted. No change. Put the save interval to 9999. No change. Rebooted. No change.

Any ideas? Thanks!

Fingers · Joined: 25 May 2013 Posts: 14 Location: London, UK

It's slowed down a bit, now. Still at lest evey 6 seconds. Thought I'd try ffconvert's screen capture (ooo my first video Razz

) to show you I'm not a fibber

http://youtu.be/vnJiINHQ2WU

rcrsn51 · Posted: Mon 27 May 2013, 07:35 Post subject:

Go to the folder /etc/rc.d and open the file PUPSTATE. What is the value of the PUPMODE variable?

Fingers · Joined: 25 May 2013 Posts: 14 Location: London, UK

Hi rcrsn51

PUPMODE=12

( PMEDIA='cd' but I'm using USB - I don't know if this matters)

Fingers · Joined: 25 May 2013 Posts: 14 Location: London, UK

... yeah it seems it should be usb not cd - I'll try that

rcrsn51 · Posted: Mon 27 May 2013, 07:47 Post subject:

Because you are in PUPMODE=12, your savefile is mounted, so it is constantly in use. A regular flash drive install uses PUPMODE=13 where the save file resides in a separate layer and is only written to periodically.

Fingers · Joined: 25 May 2013 Posts: 14 Location: London, UK

Actually I won't (referring to my last post) because I don't know what I'm doing. I'm going out now and will look into it later. Got some learning to do with this one.

Still, if anyone can point me in the right direction, great!

rcrsn51 · Posted: Mon 27 May 2013, 08:00 Post subject:

Open the file syslinux.cfg on your flash drive and change the argument to "pmedia=ataflash".

Sylvander · Posted: Mon 27 May 2013, 08:57 Post subject:

1. I just finished [a couple of minutes back, successfully] doing the following plus some other stuff to Precise-5.6.
I'm booting using a CD-RW with the pupsave on an internal HDD.
a. Begin with this lot.
[Do Items 4->(if your pupsave is on your internal HDD), then 1, then 2, then 3]
I like holding the pupsave on an internal HDD [it's faster than a Flash Drive], and using item 4 [in the page linked above] to have it treated as though on a Flash Drive.

b. Having completed the above, proceed to HERE to see the small code change to add to the code shown HERE.
This makes "Don't Save..." the default, when asked at shut-down whether you wish "to save or not to save".

2. The beauty of the above is that:
Session changes are only saved back to the pupsave IF and WHEN you choose.
a. During the session:
There is only a save IF/WHEN you choose to do it manually by clicking the "Save..." icon.

b. At shutdown/reboot:
You are asked whether you want "to save or not to save", and the default [click OK to accept] is "Don't save...".

Fingers · Joined: 25 May 2013 Posts: 14 Location: London, UK

Thanks guys.

rcrsn51, I can see that this would work but ... but .... it's lying Shocked

!

I've got the time and I want to learn so I've gone for Sylvander's suggestions.

I've done: "a. Begin with this lot." items 4. (remaster with pupmode=13 in init) and 1. (Puppy Event Manager save interval=0)

... but I had this problem:

re: kleung21's post http://www.murga-linux.com/puppy/viewtopic.php?p=82239#82239 - Forcing pupmode 13 by remastering

When trying to mount initrd with 'mount ...' I got errors but got it to work with zcat instead:

mkdir /root/minit
cd /root/minit
zcat /mnt/{my usb stick where Puppy is booted from}/initrd.gz | cpio -i -d
leafpad initrc
#### In leafpad, I inserted:
#### PUPMODE=13
#### before the line:
#### case $PUPMODE in
sync
find .|cpio -o -H newc | gzip -9 > /mnt/{my usb stick where Puppy is booted from}/initrd.gz
sync
cd /root
sync

(Then I deleted the /root/minit directory)

Note: init was not in /root/minit/sbin/ - it's in /root/minit/

Thanks Bruce B for showing the zcat method.

I was about to ask why I don't have a save icon on the desktop but it's appeared as if by magic Smile

(now that I'm in pupmode 13)

This solves my hyperactive hard drive.

The other stuff is exactly what I was wanting to do next - you read my mind Smile

Brilliant, thanks!

Fingers · Joined: 25 May 2013 Posts: 14 Location: London, UK

All done. Awesome. Thanks again.

This will be perfect for the netbook I'm getting next week that I just want to be a word processor. I'll save my work as and when and probably rarely save the session once I get everything how I want it. This was exactly what I wanted a few days ago when I'd never even heard of Puppy Linux.

Running from RAM rocks! It's always exasperated me that no matter the incredible leaps in hardware technology the software manages to keep it pushed to the limits. Great if you're a gamer, but to do simple stuff, why have a machine that struggles? Puppy addresses this brilliantly.

Very pleased Very Happy

Ted Dog · Joined: 13 Sep 2005 Posts: 1961 Location: Heart of Texas

Now play with the suspend to RAM function with lid closed, and if you get into the habit of closing lid between uses, battery life can last about a week. On my 64bit notebook its about 7% per day loss of battery with lid down on fully MAXed out RAM on my older 32bit and a older version of puppy, packed it up on and had it in storage for a little over a month so I was surprised when lifting lid and puppy was is running in RAM.

Sky Aisling

Ted Dog writes:

Fingers · Joined: 25 May 2013 Posts: 14 Location: London, UK

Cheers Ted. First I must wait for my netbook to arrive!

Ted Dog · Joined: 13 Sep 2005 Posts: 1961 Location: Heart of Texas