Precise Puppy 5.5 Release Candidate
UDF support feedback
I noticed from BK's blog that he had implemented udf support for dvd's.
I had an already udf formatted dvd that I've used in the past on Windoze to do backups. I'm pleased to report that it mounted just fine on Precise 5.4.90 and I was able to delete files and copy files to it just like it is a hard disk - which is great.
I did notice however that neither Partview nor Pmount seemed to know that the dvd/filesystem was mounted....see screenie
plus, I wonder how you would go about formatting a dvd for udf access? Is this done via gparted? Does gparted support udf dvd fomatting or should some other program be used - Pburn?
All-in-all I'd say this is a great addition to the Puppy armoury....
Cheers
peebee
I had an already udf formatted dvd that I've used in the past on Windoze to do backups. I'm pleased to report that it mounted just fine on Precise 5.4.90 and I was able to delete files and copy files to it just like it is a hard disk - which is great.
I did notice however that neither Partview nor Pmount seemed to know that the dvd/filesystem was mounted....see screenie
plus, I wonder how you would go about formatting a dvd for udf access? Is this done via gparted? Does gparted support udf dvd fomatting or should some other program be used - Pburn?
All-in-all I'd say this is a great addition to the Puppy armoury....
Cheers
peebee
- Attachments
-
- capture12559.png
- (89.78 KiB) Downloaded 1210 times
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Here's a quick comparison:sszindian wrote:5.4.90
One thing, I do believe some of the 'fonts' could be a wee-bit 'thicker', especially in browser-headings of Seamonkey... there they could also be a bit larger
I transplanted the contents of etc/fonts from pemasu's dpup Exprimo into this build. At this image size you probably won't see a big difference, but on screen, it will not go unnoticed.
Haven't done yet much testing, so far runs smooth and cool on my eeepc.
- Attachments
-
- pemasu's_etc_fonts.png
- (81.04 KiB) Downloaded 1223 times
-
- default.png
- (73.67 KiB) Downloaded 1228 times
installed openshot (ubuntu version) from the PPM and it fired up straight away, i'm glad the python.deb install scripts are now being run.
alsaequal is excellent and works well
the chat icon on the desktop is pointing to pidgin instead of xchat or mozchat. thanks for removing ayttm, it was a pain!!
it would be nice if glipper is set to autostart by linking it to /root/Startup, it's extremely useful and a lot of people probably don't know that it's there.
alsaequal is excellent and works well
the chat icon on the desktop is pointing to pidgin instead of xchat or mozchat. thanks for removing ayttm, it was a pain!!
it would be nice if glipper is set to autostart by linking it to /root/Startup, it's extremely useful and a lot of people probably don't know that it's there.
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Fast download of Precise 5.4.90
http://ftp.nluug.nl/ftp/pub/os/Linux/di ... 5.5alpha1/
precise-5.4.91-k3.8rc7-nopae-scsi.iso is also available there.
.
http://ftp.nluug.nl/ftp/pub/os/Linux/di ... 5.5alpha1/
precise-5.4.91-k3.8rc7-nopae-scsi.iso is also available there.
.
Problem with report-video
Currently picks up my pci DVB-T card details rather than my graphics card.
Tazoc's latest pet provides an accurate report
Tazoc's latest pet provides an accurate report
Code: Select all
# report-video
VIDEO REPORT: Precise Puppy, version 5.4.90
Chip description:
Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder
Requested by /etc/X11/xorg.conf:
Probing Xorg startup log file (/var/log/Xorg.0.log):
Loaded modules: dbe dri dri2 extmod fb glx kbd mouse ramdac record wfb
Actual rendering on monitor:
Resolution: 1920x1080 pixels (513x292 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
#
Code: Select all
video-info-glx 1.5.1 Mon 11 Feb 2013 on Precise Puppy 5.4.90 Linux 3.2.29 i686
0.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2)
oem: NVIDIA
product: GT218 Board - 08740000 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.11.3
dimensions: 1920x1080 pixels (513x292 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce 210/PCIe/SSE2
OpenGL version string: 3.3.0 NVIDIA 304.43
Intel(R) Pentium(R) D CPU 3.40GHz
Core 0: @3400 1: @3400 MHz
...the above also recorded at '/tmp/root/video-info-glx'.
Regards ETP
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
Thanks for providing this - Downloaded 5.4.90 yesterday from Ibibilo - took 43 minutes using fast DSL - using this site was able to download 5.4.91 in 20 minutes.don570 wrote:Fast download of Precise 5.4.90
http://ftp.nluug.nl/ftp/pub/os/Linux/di ... 5.5alpha1/
precise-5.4.91-k3.8rc7-nopae-scsi.iso is also available there.
.
Appreciate it.
Frugal install to Flash drive
▶—— CPU ——◀
Intel(R) Celeron(R) CPU 2.66GHz
Socket Designation: CPU Socket
Manufacturer: Intel
Voltage: 1.4 V
External Clock: 133 MHz
Max Speed: 2660 MHz
Current Speed of Core 0:2663 MHz
▶—— Video ——◀
Display:
Video Driver: intel
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 865G x86/MMX/SSE2
OpenGL version string: 1.3 Mesa 8.0.4
Screen Resolution: 1024x768 pixels (270x203 millimeters)
Screen Depth: 24 bits (planes)
X.Org version: 1.11.3
Video Chip:
2.0 VGA compatible controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02)
oem: Intel(r)865G Graphics Chip Accelerated VGA BIOS
vendor: Intel Corporation
product: Intel(r)865G Graphics Controller Hardware Version 0.0
-----------------------------------------------------------------------------------------------------
I've seen this in Precise (the alpha version too), both in JWM and Openbox: when I right-click a file from ROX and select either Copy, Rename, or Move (several times, the one I use more frequently is Copy), the screen turns black, showing only the taskbar, then if I try to use other programs the taskbar disappears and all is finally black. I restart X and keep doing things as usual, then after many times copying files from ROX right-click menu I get the black screen again.
▶—— CPU ——◀
Intel(R) Celeron(R) CPU 2.66GHz
Socket Designation: CPU Socket
Manufacturer: Intel
Voltage: 1.4 V
External Clock: 133 MHz
Max Speed: 2660 MHz
Current Speed of Core 0:2663 MHz
▶—— Video ——◀
Display:
Video Driver: intel
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 865G x86/MMX/SSE2
OpenGL version string: 1.3 Mesa 8.0.4
Screen Resolution: 1024x768 pixels (270x203 millimeters)
Screen Depth: 24 bits (planes)
X.Org version: 1.11.3
Video Chip:
2.0 VGA compatible controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02)
oem: Intel(r)865G Graphics Chip Accelerated VGA BIOS
vendor: Intel Corporation
product: Intel(r)865G Graphics Controller Hardware Version 0.0
-----------------------------------------------------------------------------------------------------
I've seen this in Precise (the alpha version too), both in JWM and Openbox: when I right-click a file from ROX and select either Copy, Rename, or Move (several times, the one I use more frequently is Copy), the screen turns black, showing only the taskbar, then if I try to use other programs the taskbar disappears and all is finally black. I restart X and keep doing things as usual, then after many times copying files from ROX right-click menu I get the black screen again.
- Attachments
-
- copyfile-by-rightclick.jpg
- (56.08 KiB) Downloaded 1002 times
-
- precise-5.4.90-openbox.jpg
- (44.53 KiB) Downloaded 1084 times
[url=http://murga-linux.com/puppy/viewtopic.php?t=76948]Puppy Linux en español[/url]
glipper_shell
This is /usr/local/bin/glipper_shell internationalized (where can I find the Glipper Preferences script?):
Code: Select all
#!/bin/sh
#Barry Kauler 2007
#20130211 internationalized
export TEXTDOMAIN=glipper_shell
export OUTPUT_CHARSET=UTF-8
Xdialog --center --title "$(gettext 'Glipper clipboard manager')" --ok-label "$(gettext 'Enable Glipper')" --cancel-label "$(gettext 'Disable Glipper')" --yesno "$(gettext 'Glipper is a great little taskbar applet for managing the clipboard.')
$(gettext 'If you click the Enable Glipper button, then Glipper will appear in
the takbar, and will also start automatically in the future.
If you click the Disable Glipper button, then if Glipper is runnng
it will be terminated now and will not be started in the future.')" 0 0
RETVAL=$?
if [ $RETVAL -eq 0 ];then
touch /root/.glipper_on
PSRUN="`ps`"
[ "`echo "$PSRUN" | grep -v 'glipper_shell' | grep 'glipper'`" = "" ] && glipper &
exit
fi
if [ $RETVAL -eq 1 ];then
rm -f /root/.glipper_on
killall glipper
exit
fi
- Attachments
-
- glipper.jpg
- (25.88 KiB) Downloaded 1045 times
[url=http://murga-linux.com/puppy/viewtopic.php?t=76948]Puppy Linux en español[/url]
-
- Posts: 43
- Joined: Tue 12 Feb 2013, 03:36
go to the internet connection wizard and choose the tool you connect with (for example I use GPRS Connect) as the one that launches when you click the desktop connect icon, then you will be able to disconnect by right-clicking the taskbar network icon and selecting 'disconnect from network'witekjeden wrote:Hi, still problem with an console application for 3g modems. I can not to disconnect by the short ctrl+c. The same problem in Precises 5.4.x.
[url=http://murga-linux.com/puppy/viewtopic.php?t=76948]Puppy Linux en español[/url]
-
- Posts: 43
- Joined: Tue 12 Feb 2013, 03:36
Precise Puppy 5.5alpha1
I saw the 5491 link so I downloaded the iso and did a manual frugal
install to a 4gb flash drive running on an EeePC 701 netbook.
The EeePC 701 is connected to a 19" lcd monitor.
video-info-glx 1.5.1 Tue 12 Feb 2013 on PrecisePuppy5.4.91 Linux 3.8.0-rc7 i686
2.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML
Express Graphics Controller (rev 04)
oem: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
product: Intel(r)915GM/910ML/915MS Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: intel
X.Org version: 1.11.3
dimensions: 1280x1024 pixels (338x270 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 915GM x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 8.0.4
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
160 frames in 5.0 seconds = 31.916 FPS
132 frames in 5.0 seconds = 26.257 FPS
149 frames in 5.0 seconds = 29.765 FPS
Intel(R) Celeron(R) M processor 900MHz
Core 0: @Intel(R) 1: @900 MHz
Computer
Processor Intel(R) Celeron(R) M processor 900MHz
Memory 505MB (65MB used)
Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter
(PCI-Express) (rev 01)
Installed from ppm: Kdegames,Vlc-2.0.5,Lxterminal
Installed from pets: Video-Info-Glx,PupSnap,cmus-v2.5.0-i686.pet,
fox-1.6.47-i686.pet,xfe-1.34-i686.pet, and an opera_12.14.1738_i386.deb
downloaded from the Opera website.
It's working well.
install to a 4gb flash drive running on an EeePC 701 netbook.
The EeePC 701 is connected to a 19" lcd monitor.
video-info-glx 1.5.1 Tue 12 Feb 2013 on PrecisePuppy5.4.91 Linux 3.8.0-rc7 i686
2.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML
Express Graphics Controller (rev 04)
oem: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
product: Intel(r)915GM/910ML/915MS Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: intel
X.Org version: 1.11.3
dimensions: 1280x1024 pixels (338x270 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 915GM x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 8.0.4
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
160 frames in 5.0 seconds = 31.916 FPS
132 frames in 5.0 seconds = 26.257 FPS
149 frames in 5.0 seconds = 29.765 FPS
Intel(R) Celeron(R) M processor 900MHz
Core 0: @Intel(R) 1: @900 MHz
Computer
Processor Intel(R) Celeron(R) M processor 900MHz
Memory 505MB (65MB used)
Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter
(PCI-Express) (rev 01)
Installed from ppm: Kdegames,Vlc-2.0.5,Lxterminal
Installed from pets: Video-Info-Glx,PupSnap,cmus-v2.5.0-i686.pet,
fox-1.6.47-i686.pet,xfe-1.34-i686.pet, and an opera_12.14.1738_i386.deb
downloaded from the Opera website.
It's working well.
- Attachments
-
- screenshot.jpg
- (51.86 KiB) Downloaded 917 times
Manual frugal install on my trusty old Athlon XP box....... all looking good.
# report-video
VIDEO REPORT: Precise Puppy, version 5.4.91
Chip description:
oem: NVidia
product: NV18 () Board Chip Rev A2
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1440x900
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Loaded modules: dbe dri dri2 exa extmod fb glx kbd mouse record shadowfb
Actual rendering on monitor:
Resolution: 1440x900 pixels (380x238 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
2323 frames in 5.0 seconds = 464.529 FPS
2482 frames in 5.0 seconds = 496.232 FPS
2498 frames in 5.0 seconds = 499.455 FPS
2484 frames in 5.0 seconds = 496.719 FPS
2523 frames in 5.0 seconds = 504.598 FPS
2447 frames in 5.0 seconds = 489.347 FPS
2452 frames in 5.0 seconds = 490.379 FPS
-Computer-
Processor : AMD Athlon(tm) XP 2400+
Memory : 1033MB (220MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Tue 12 Feb 2013 01:31:08 AM CST
-Display-
Resolution : 1440x900 pixels
OpenGL Renderer : Mesa DRI nv18 x86/MMX+/3DNow!+/SSE
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : VIA8233 - VIA 8235
Working well so far.
# report-video
VIDEO REPORT: Precise Puppy, version 5.4.91
Chip description:
oem: NVidia
product: NV18 () Board Chip Rev A2
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1440x900
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Loaded modules: dbe dri dri2 exa extmod fb glx kbd mouse record shadowfb
Actual rendering on monitor:
Resolution: 1440x900 pixels (380x238 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
2323 frames in 5.0 seconds = 464.529 FPS
2482 frames in 5.0 seconds = 496.232 FPS
2498 frames in 5.0 seconds = 499.455 FPS
2484 frames in 5.0 seconds = 496.719 FPS
2523 frames in 5.0 seconds = 504.598 FPS
2447 frames in 5.0 seconds = 489.347 FPS
2452 frames in 5.0 seconds = 490.379 FPS
-Computer-
Processor : AMD Athlon(tm) XP 2400+
Memory : 1033MB (220MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Tue 12 Feb 2013 01:31:08 AM CST
-Display-
Resolution : 1440x900 pixels
OpenGL Renderer : Mesa DRI nv18 x86/MMX+/3DNow!+/SSE
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : VIA8233 - VIA 8235
Working well so far.
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
Re: glipper_shell
Very nicevicmz wrote:This is /usr/local/bin/glipper_shell internationalized (where can I find the Glipper Preferences script?):
Code: Select all
#!/bin/sh #Barry Kauler 2007 #20130211 internationalized export TEXTDOMAIN=glipper_shell export OUTPUT_CHARSET=UTF-8 Xdialog --center --title "$(gettext 'Glipper clipboard manager')" --ok-label "$(gettext 'Enable Glipper')" --cancel-label "$(gettext 'Disable Glipper')" --yesno "$(gettext 'Glipper is a great little taskbar applet for managing the clipboard.') $(gettext 'If you click the Enable Glipper button, then Glipper will appear in the takbar, and will also start automatically in the future. If you click the Disable Glipper button, then if Glipper is runnng it will be terminated now and will not be started in the future.')" 0 0 RETVAL=$? if [ $RETVAL -eq 0 ];then touch /root/.glipper_on PSRUN="`ps`" [ "`echo "$PSRUN" | grep -v 'glipper_shell' | grep 'glipper'`" = "" ] && glipper & exit fi if [ $RETVAL -eq 1 ];then rm -f /root/.glipper_on killall glipper exit fi
But 2 small typos (still from original script):
takbar and runnng
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Re: UDF support feedback
I tested partview and pmount with a udf dvd, they both work correctly.peebee wrote:I did notice however that neither Partview nor Pmount seemed to know that the dvd/filesystem was mounted....see screenie
If 'probepart' returns correct "udf" f.s. for the optical disc, then partview and pmount will also work correctly.
[url]https://bkhome.org/news/[/url]
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
That had me puzzled for a moment, then I realised that Precise had been built with the wrong xchat PET.666philb wrote:the chat icon on the desktop is pointing to pidgin instead of xchat or mozchat. thanks for removing ayttm, it was a pain!!
The latest one I created is in the 'common' repo, and has a 'pinstall.sh' (post-install) script that fixes /usr/local/bin/defaultchat to run chat.
I have modified the package-list for precise in Woof:
Code: Select all
yes|xchat||exe,dev,doc,nls|pet:common #using this instead of ayttm.
I know there is also Chatzilla, but I was thinking at the time, might want to do a build without SM, or a cutdown SM that doesn't have Chatzilla.
[url]https://bkhome.org/news/[/url]
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
I don't yet know whether to include Frisbee in 5.5beta (the next build).irishrm wrote:Installed to multisession cd.
Had to install frisbee to activate my wl driver. Apart from that everything working very well.
irishrm.
I will rely on feedback, how well it works in 5.5alpha1, and whether it stomps on the toes of the other connection systems or not.
[url]https://bkhome.org/news/[/url]
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Re: Problem with report-video
ETP,ETP wrote:Currently picks up my pci DVB-T card details rather than my graphics card.
Would you mind running these two, and post them here (this forum thread):
# scanpci | gzip - > scanpci.log.gz
# lspci | gzip - > lspci.log.gz
[url]https://bkhome.org/news/[/url]
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
vicmz,vicmz wrote: I've seen this in Precise (the alpha version too), both in JWM and Openbox: when I right-click a file from ROX and select either Copy, Rename, or Move (several times, the one I use more frequently is Copy), the screen turns black, showing only the taskbar, then if I try to use other programs the taskbar disappears and all is finally black. I restart X and keep doing things as usual, then after many times copying files from ROX right-click menu I get the black screen again.
With ROX, I just drag a file, then when I release the left-button a menu pops up asking whether want to copy, move or link.
Does this way work OK for you?
[url]https://bkhome.org/news/[/url]