Page 1 of 12
X-Tahr-2.0 with Xfce
Posted: Thu 18 Jun 2015, 10:28
by rg66
X-Tahr is a Puppy Linux derivative based on 666philb's Tahrpup with the Xfce desktop environment and is Ubuntu Trusty Tahr compatible.
Features:
File-roller archive manager (as of v2.0)
Geany text editor
Mozilla Light web browser
Simple File Sharing for Samba
Thunar file manager
VLC media player
Xfce4-Whisker menu
Version 2.0 is the latest version based on
tahrpup-6.0.5 (32bit) with
Xfce-4.12 and comes with the 3.14.56 PAE kernel.
Version 1b3 is a testing version based on
tahrpup-6.0.2 (32bit) with
Xfce-4.12 and comes with the 3.14.20 noPAE kernel.
Download
ISO: http://smokey01.com/rg66/X-tahr/iso/
Applications list
http://smokey01.com/rg66/X-tahr/current ... s_list.txt
Change log
http://smokey01.com/rg66/X-tahr/change_log.txt
Recommended minimum requirements
2Ghz CPU and 1GB RAM
Special thanks to tahrpup developer 666philb, smokey01 for hosting, and as usual, Geoffrey.
Eclipse wallpaper font courtesy of Kevin Christopher @
http://www.kcfonts.com
Posted: Thu 18 Jun 2015, 10:47
by rg66
Note:
1) Service Pack checks have been disabled as the .pet may overwrite some customized scripts. I will most likely integrate important SP bits into future releases.
2) PPM databases were updated on August 17 2016
Posted: Thu 18 Jun 2015, 18:04
by Marv
Downloaded, md5sum checked ok. Grub4Dos frugal install (pristine) to Intel SATA SSD on core 2 duo iwlwifi Intel mobile series 4 video laptop. Sound ok on boot, video uses Intel driver and Mesa, glxgears 1350 FPS (as expected on this laptop). Wireless connection flawless using Frisbee. Posting from Firefox in it now (did make symlink in /root/.mozilla to my common Firefox profile. Singleclicked it and will make a savefile and use it. Touchpad also completely usable OOTB. Haven't turned off the tap-to-click yet, set any wallpaper or played with icons.
Edit: Savefile created correctly (unencrypted, 256Mb, EXT2), reboot fine. Lid suspend works OOTB on this laptop. More later..
Thanks,
Posted: Thu 18 Jun 2015, 18:39
by rg66
Thanks for the report Marv, I can always count on you. Good to hear about the touchpad, X-slacko always had tap-to-click disabled OOTB which I want enabled.
I edited shutdownconfig not only to get rid of as much yellow as possible but to eliminate asking for encryption if a save dir is chosen. Too many clicks to save in my opinion.
Posted: Thu 18 Jun 2015, 18:49
by ally
Posted: Thu 18 Jun 2015, 19:10
by starhawk
I've downloaded it... I'll test it myself (on the Poulsbo box for sure, possibly also on the Dell E4310 laptop) approximately when I get around to it... probably in the next two or three days.
Posted: Thu 18 Jun 2015, 20:43
by rg66
thanks
Posted: Thu 18 Jun 2015, 21:27
by siklopz
i just want to thank you for your work. x-precise was one of my favorite puplets, and i look forward to trying this one out. would you mind if i link it on the Puppy Linux Users Group on Facebook?
Re: thanks
Posted: Thu 18 Jun 2015, 21:42
by rg66
siklopz wrote:i just want to thank you for your work. x-precise was one of my favorite puplets, and i look forward to trying this one out.
Thanks, I appreciate it.
would you mind if i link it on the Puppy Linux Users Group on Facebook
Not at all, just remember it's beta and probably has a lot of bugs.
Posted: Fri 19 Jun 2015, 01:44
by Marv
Continuing.. Using standard.svg icons, xfce4 v 1.0.5 battery monitor plugin installed using the PPM and added to the panel. Swapped in my retro-retro default 4.0 xfce theme, ran my browserlink pet to set up the external ones, mostly for Opera as I have been using it and the ESR Firefox with the tabs on bottom and Ghostery addons pretty much exclusively. Set up my networked HP4500 Officejet computer using a hplip 3.14.10 pet and the inbuilt CUPS. No hitches at all there with the printing. Never scan or FAX with it. Wallpaper set (came up without on the pristine install). Fiddling with governor etc. Don't have a good feel yet for CPU use etc. Seems ok, maybe a bit 'heavier' than X-slacko but I've been trimming and customizing that as it progressed so apples and oranges yet.
Several X restarts and a couple of reboots all ok too.
Anything I should try and break? Haven't managed to yet
Posted: Fri 19 Jun 2015, 01:57
by rg66
Marv wrote:Wallpaper set (came up without on the pristine install).
Initial boot had no wallpaper? Strange, it booted like that in Vbox but can't reproduce on my desktop.
Anything I should try and break? Haven't managed to yet
Not off the top of my head, it took me a week to build it so I think I got the major bugs sorted.
Posted: Fri 19 Jun 2015, 02:31
by Marv
rg66 wrote:Marv wrote:Wallpaper set (came up without on the pristine install).
Initial boot had no wallpaper? Strange, it booted like that in Vbox but can't reproduce on my desktop.
When I bring it up on some of the other computers I'll do pristine boots first and see if it shows up there. Seemed as though the directory 'backgrounds' wasn't selected. Pretty sure it came up blank after the savefile creation and first reboot as well. I thought backgrounds might be empty so I copied an image or two there and then selected backgrounds as the directory in the wallpaper chooser and there they all were.
Posted: Fri 19 Jun 2015, 02:38
by rg66
Marv wrote:When I bring it up on some of the other computers I'll do pristine boots first and see if it shows up there. Seemed as though the directory 'backgrounds' wasn't selected. Pretty sure it came up blank after the savefile creation and first reboot as well. I thought backgrounds might be empty so I copied an image or two there and then selected backgrounds as the directory in the wallpaper chooser and there they all were.
It should have read the xfce4-desktop.xml to get the wallpaper, looks like it didn't but should then have defaulted to xfce-teal. I'll have to check/edit the source and recompile, must still be looking in .../backgrounds/xfce
Posted: Fri 19 Jun 2015, 03:26
by Geoffrey
The wallpaper needs a symlink in /usr/share/xfce4/backdrops to /usr/share/backgrounds, that's how it is in the other xfce pups.
the /root/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-desktop.xml
is set to 4 workspaces with teal as the background.
Code: Select all
<channel name="xfce4-desktop" version="1.0">
<property name="backdrop" type="empty">
<property name="screen0" type="empty">
<property name="monitorVGA1" type="empty">
<property name="workspace0" type="empty">
<property name="color-style" type="int" value="0"/>
<property name="image-style" type="int" value="5"/>
<property name="last-image" type="string" value="/usr/share/backgrounds/xfce-blue.jpg"/>
</property>
<property name="workspace1" type="empty">
<property name="color-style" type="int" value="0"/>
<property name="image-style" type="int" value="5"/>
<property name="last-image" type="string" value="/usr/share/backgrounds/xfce/xfce-teal.jpg"/>
</property>
<property name="workspace2" type="empty">
<property name="color-style" type="int" value="0"/>
<property name="image-style" type="int" value="5"/>
<property name="last-image" type="string" value="/usr/share/backgrounds/xfce/xfce-teal.jpg"/>
</property>
<property name="workspace3" type="empty">
<property name="color-style" type="int" value="0"/>
<property name="image-style" type="int" value="5"/>
<property name="last-image" type="string" value="/usr/share/backgrounds/xfce/xfce-teal.jpg"/>
</property>
</property>
</property>
</property>
Posted: Fri 19 Jun 2015, 03:47
by rg66
Geoffrey wrote:The wallpaper needs a symlink in /usr/share/xfce4/backdrops to /usr/share/backgrounds, that's how it is in the other xfce pups.
Xfce-4.10.x did need the symlink but 4.12 doesn't if you edit the source code right.
the /root/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-desktop.xml
is set to 4 workspaces with teal as the background.
Ya, not sure were that xml came from but I think part of the problem for anyone other than myself is:
Code: Select all
<property name="monitorVGA1" type="empty">
should probably be monitor0 for most.
Posted: Fri 19 Jun 2015, 05:29
by umair
Hi rg66:
I was waiting for this release from a long time. Will surely check this. Downloading now
.
Thanks
UMAIR
Posted: Fri 19 Jun 2015, 05:32
by rg66
Turns out I missed editing one file so xfdesktop still defaults to /usr/share/backgrounds/xfce if the xfce4-desktop.xml is missing or wrong. I've recompiled (.la nightmare) and now it defaults to /usr/share/backgrounds. /usr/share/xfce4/backdrops symlink shouldn't be needed.
Below is the new /usr/bin/xfdesktop and a generic /root/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-desktop.xml which you probably won't need if you've configured your desktop but should add if your rebuilding the sfs.
Make sure xfdesktop is executable.
Posted: Fri 19 Jun 2015, 10:46
by Elena
Using it right now - very nice and convenient (as usual)! I'm about to configure and add some preferred apps. Gonna post any issues.
Many thanks for your work, rg66!
Posted: Fri 19 Jun 2015, 13:16
by rg66
Posted: Fri 19 Jun 2015, 15:05
by siklopz
i dropped phil's 4.0.4 kernel into the mix, and it's still running like a top.