Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Sun 30 Aug 2015, 10:17
All times are UTC - 4
 Forum index » Advanced Topics » Additional Software (PETs, n' stuff) » Desktop
Simple Screen Recorder
Post new topic   Reply to topic View previous topic :: View next topic
Page 1 of 2 [16 Posts]   Goto page: 1, 2 Next
Author Message
l0wt3ch

Joined: 23 Apr 2014
Posts: 95

PostPosted: Thu 26 Feb 2015, 03:32    Post subject:  Simple Screen Recorder
Subject description: Tested on Slacko derivative
 

This is a great screencast app, much better than any other I have tried on Linux.

Hopefully it doesn't need any special dependencies, because I have so many apps installed already it's hard to know.

Download
Back to top
View user's profile Send private message 
ebisu

Joined: 25 Sep 2013
Posts: 74

PostPosted: Fri 27 Feb 2015, 03:38    Post subject:  

What a lame excuse. Your great app doesn't work. Missing:
libQtGui.so.4
libQtCore.so.4
libglapi.so.0
libxcb-dri3.so.0
libxcb-present.so.0
libxcb-sync.so.1
libxshmfence.so.1
Back to top
View user's profile Send private message 
l0wt3ch

Joined: 23 Apr 2014
Posts: 95

PostPosted: Fri 27 Feb 2015, 04:12    Post subject:  

ebisu wrote:
What a lame excuse. Your great app doesn't work. Missing:
libQtGui.so.4
libQtCore.so.4
libglapi.so.0
libxcb-dri3.so.0
libxcb-present.so.0
libxcb-sync.so.1
libxshmfence.so.1

Ok, I'll just take it down then.
Back to top
View user's profile Send private message 
greengeek

Joined: 20 Jul 2010
Posts: 3218
Location: New Zealand

PostPosted: Sat 28 Feb 2015, 03:28    Post subject:  

I'm keen to try it as is - any current link? cheers
Back to top
View user's profile Send private message 
l0wt3ch

Joined: 23 Apr 2014
Posts: 95

PostPosted: Sat 28 Feb 2015, 05:52    Post subject:  

Ok, just for you greengeek. The link is working again.

Apparently it needs some dependencies, though...
Back to top
View user's profile Send private message 
greengeek

Joined: 20 Jul 2010
Posts: 3218
Location: New Zealand

PostPosted: Sat 28 Feb 2015, 15:43    Post subject:  

Thanks! Works well for me on my Slacko 5.6 derivative. Its not a box-standard Slacko 5.6 so I may well have extra libs loaded from other additional programmes that allow SSR to run fine.

I did get some error messages at the start but it didnt prevent SSR running:
Code:
# simplescreenrecorder
Unable to load library icui18n "Cannot load library icui18n: (libicui18n.so.49: cannot open shared object file: No such file or directory)"
QGtkStyle was unable to detect the current GTK+ theme.
Could not load system translator.
==================== SSR started ====================
SimpleScreenRecorder 0.3.3
Compiled with GCC 4.7.1
Qt: header 4.8.2, lib 4.8.2
libavformat: header 55.19.104, lib 55.12.100
libavcodec: header 55.39.100, lib 55.18.102
libavutil: header 52.48.100, lib 52.38.100
libswscale: header 2.5.101, lib 2.3.100
[CPUFeatures::Detect] CPU features: mmx sse sse2 sse3 ssse3
[ALSAInput::GetSourceList] Generating source list ...
[ALSAInput::GetSourceList] Found card: [hw:0] HDA Intel
[ALSAInput::GetSourceList] Found device: [hw:0,0] HDA Intel: ALC268 Analog


The only issue I had is when I wanted to stop recording I couldn't find a 'stop recording' button - only the 'pause recording' button. Anyway - that worked fine instead of a stop button and the video had saved properly so all good here. Even had sound! Nice addition - cheers 10wt3ch!
Back to top
View user's profile Send private message 
Semme

Joined: 07 Aug 2011
Posts: 5464
Location: World_Hub

PostPosted: Sat 28 Feb 2015, 16:03    Post subject:  

l0wt3ch, you covered yourself just fine. Wink

To think we all should boot a pristine environment to know these things is ridiculous.
Quote:
I have so many apps installed already it's hard to know.

_________________
>>> Great minds discuss ideas; Average minds discuss events; Small minds discuss people. <<<
Back to top
View user's profile Send private message 
l0wt3ch

Joined: 23 Apr 2014
Posts: 95

PostPosted: Sat 28 Feb 2015, 23:20    Post subject:  

@greengeek: You're welcome!

@Semme: Thanks!
Back to top
View user's profile Send private message 
greengeek

Joined: 20 Jul 2010
Posts: 3218
Location: New Zealand

PostPosted: Sun 01 Mar 2015, 13:09    Post subject:  

I did a bit more testing with an unmodified Slacko 5.6 booted from CD (no savefile) and found SSR wouldn't run due to missing libs. Turned out my derivative runs because I have Skype installed and it contains the libs needed by SSR.

I had previously made a pet containing those libs and if anyone wants it you can download it here
(Mentioned in thread here)

It contains approx 40MB of libs that were necessary for Skype, but one of the files in there (libQtWebKit.so.4.9.2) is 24MB and doesn't seem to be necessary for SSR so can be removed after pet installation (find it in /usr/lib). (I don't know if this lib is needed for any of the fancy functions of SSR - I just did basic recording without any fancy changes to the gui settings)

Bear in mind that the pet was made for Slacko 5.6 so may not be suitable for use on other Puppies.
Back to top
View user's profile Send private message 
l0wt3ch

Joined: 23 Apr 2014
Posts: 95

PostPosted: Sun 08 Mar 2015, 13:29    Post subject:  

Good job, greengeek!
Back to top
View user's profile Send private message 
Keef


Joined: 20 Dec 2007
Posts: 707
Location: Staffordshire

PostPosted: Mon 01 Jun 2015, 18:17    Post subject:  

This is the culprit:
http://www.maartenbaert.be/simplescreenrecorder/

Compiles on TahrPup easily as it has needed QT libs and other deps as standard. I did have to use '--without-pulseaudio --without-jack', as they are missing. Runs without devx installed.
Video capture seems to work well, but not able to test sound as laptop has no built-in mike, and I don't have one to plug in (so I won't upload a pet). I'm sure somebody who can test it more thoroughly will be able to oblige.
Back to top
View user's profile Send private message 
Pelo


Joined: 10 Sep 2011
Posts: 5093
Location: Mer méditerrannée (1 kms°)

PostPosted: Tue 21 Jul 2015, 20:28    Post subject: Replace Drec dpuprec (2009)
Subject description: Works in Slacko 5.9.3 too
 

Links made to drec dpuprec old software by gposil here (no Qt needed)
Sure SSR works fine when installed (Tahrpup and Vividpup).
my video made with SSR Vividpup 6.5 can be seen here, Sure i would be glad to use this tool on older puppies.
Slacko 5.9.3 Screencastrecorder fine too, just install greengeek pet and the two Qt librairies needed ( or better symlink them to /usr/lib)
SSR.jpg
 Description   So easy to do, even for non linuxian people !
 Filesize   85.12 KB
 Viewed   25 Time(s)

SSR.jpg


_________________
Root is the glass, Pelo wants the wine.

Last edited by Pelo on Thu 27 Aug 2015, 05:17; edited 4 times in total
Back to top
View user's profile Send private message Yahoo Messenger 
Pelo


Joined: 10 Sep 2011
Posts: 5093
Location: Mer méditerrannée (1 kms°)

PostPosted: Wed 26 Aug 2015, 09:56    Post subject: SSR simplescreenrecorder and Qt  

SSR simplescreenrecorder tested in Vivid 6.5. I agree that is the best tool for a screencast of a part of screen (Xvidcap can be moved from place to place during pause).
I don't install QT libs on each Puppy. They are stored in a Qt repository in may Hard Disk linux partition (Sda3) and i use startmount to make this partition mounted at boot. I just symlink them when an application like Simple Screen Recorder, Symphytum, Vokoscreen and so on need them.

Qt will never make my Puppies big Smile
Starmount here

_________________
Root is the glass, Pelo wants the wine.

Last edited by Pelo on Thu 27 Aug 2015, 05:48; edited 3 times in total
Back to top
View user's profile Send private message Yahoo Messenger 
Pelo


Joined: 10 Sep 2011
Posts: 5093
Location: Mer méditerrannée (1 kms°)

PostPosted: Thu 27 Aug 2015, 03:04    Post subject: here is the Debian Package For Tahrpup 6.0.2
Subject description: No dependencies needed.
 

I Got it, here is the Debian Package, no dependencies needed on tahrpup.
_________________
Root is the glass, Pelo wants the wine.

Last edited by Pelo on Thu 27 Aug 2015, 05:49; edited 1 time in total
Back to top
View user's profile Send private message Yahoo Messenger 
mcewanw

Joined: 16 Aug 2007
Posts: 2587
Location: New Zealand

PostPosted: Thu 27 Aug 2015, 03:25    Post subject:  

Hi Pelo,

Looking at the Simple Screen Recorder website only, but I have to say the progam looks great. Very nice design. Pity it uses QT and not GTK in the sense that I try to avoid having to install QT libraries, but that's just a choice really.

I'm tempted to copy the interface in a new program, but why bother when SSR is already available. I hope it works as good as it looks.

William

_________________
SomeOfMyWork: pAVrecord Precord Premote DoMyFile DoMyCommand fokSyfEyeR xhippo-mod flite_hts_pet Pfetch WIAKAPPS Pcreole DebMintDogDevWork
Back to top
View user's profile Send private message Visit poster's website 
Display posts from previous:   Sort by:   
Page 1 of 2 [16 Posts]   Goto page: 1, 2 Next
Post new topic   Reply to topic View previous topic :: View next topic
 Forum index » Advanced Topics » Additional Software (PETs, n' stuff) » Desktop
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.1372s ][ Queries: 12 (0.0101s) ][ GZIP on ]