LxPupSc64 - 64bit version of Puppy with the LXDE desktop
Superceded by hybrid iso....
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
LxPup64-16.10.1-hybrid.iso
LxPup64-16.10.1-hybrid.iso
Delta from LxPup64-16.10.1.iso
30afee4bc5e15dd54e646940166a563b LxPup64-16.10.1-hybrid.iso
Delta from LxPup64-16.10.1.iso
30afee4bc5e15dd54e646940166a563b LxPup64-16.10.1-hybrid.iso
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
impersonators of LxPups.......
peebee wrote:LxPup64-16.10.1-hybrid.iso
Delta from LxPup64-16.10.1.iso
30afee4bc5e15dd54e646940166a563b LxPup64-16.10.1-hybrid.iso
Peebee,
Can I ask a quick question? Are you the person behind "Simplicity Linux"?? I went and downloaded their "mini", "desktop" and "X" version, and I first started with the "mini', and I was kid of taken aback when it booted up, it was exactly (I mean every detail, look, to what's included in the menus, to how its organized, etc, etc) as your LXPup. I could find no difference between yours and Simplicity's....it is like downloaded yours and just wrote the Simplicity Name on a the background logo. Every thing else is "exactly" the same
It kind of turned me off, in a big way, because if he is not you, he is ripping you (micko/phil) off big time and trying to push something that he's saying is "his" when in fact it is what you've all been doing for a long time now.
Apologies if I don't understand something here.....like maybe it really is you (or approved by you/micko/phil) and you all are just branching out to try to create a more recognizable family brand based on the slack&xenial LxPups (lxde, etc).
Re: impersonators of LxPups.......
Hibelham2 wrote:peebee wrote:LxPup64-16.10.1-hybrid.iso
Delta from LxPup64-16.10.1.iso
30afee4bc5e15dd54e646940166a563b LxPup64-16.10.1-hybrid.iso
Peebee,
Can I ask a quick question? Are you the person behind "Simplicity Linux"?? I went and downloaded their "mini", "desktop" and "X" version, and I first started with the "mini', and I was kid of taken aback when it booted up, it was exactly (I mean every detail, look, to what's included in the menus, to how its organized, etc, etc) as your LXPup. I could find no difference between yours and Simplicity's....it is like downloaded yours and just wrote the Simplicity Name on a the background logo. Every thing else is "exactly" the same
It kind of turned me off, in a big way, because if he is not you, he is ripping you (micko/phil) off big time and trying to push something that he's saying is "his" when in fact it is what you've all been doing for a long time now.
Apologies if I don't understand something here.....like maybe it really is you (or approved by you/micko/phil) and you all are just branching out to try to create a more recognizable family brand based on the slack&xenial LxPups (lxde, etc).
No - Simplicity is nothing to do with me or anybody else who contributes to Puppy Linux (as far as I know).
The "author" just takes from Puppy Linux and does not contribute to the forum or give anything back to Puppy Linux (as far as I can tell). He does not make any sort of contact. Some of the changes he makes are of very poor quality and I am somewhat embarassed that people might think I have anything to do with Simplicity - I do NOT!!
But thanks for asking....
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Re: impersonators of LxPups.......
peebee wrote:Hibelham2 wrote:peebee wrote:LxPup64-16.10.1-hybrid.iso
Delta from LxPup64-16.10.1.iso
30afee4bc5e15dd54e646940166a563b LxPup64-16.10.1-hybrid.iso
Peebee,
Can I ask a quick question? Are you the person behind "Simplicity Linux"?? I went and downloaded their "mini", "desktop" and "X" version, and I first started with the "mini', and I was kid of taken aback when it booted up, it was exactly (I mean every detail, look, to what's included in the menus, to how its organized, etc, etc) as your LXPup. I could find no difference between yours and Simplicity's....it is like downloaded yours and just wrote the Simplicity Name on a the background logo. Every thing else is "exactly" the same
It kind of turned me off, in a big way, because if he is not you, he is ripping you (micko/phil) off big time and trying to push something that he's saying is "his" when in fact it is what you've all been doing for a long time now.
Apologies if I don't understand something here.....like maybe it really is you (or approved by you/micko/phil) and you all are just branching out to try to create a more recognizable family brand based on the slack&xenial LxPups (lxde, etc).
No - Simplicity is nothing to do with me or anybody else who contributes to Puppy Linux (as far as I know).
The "author" just takes from Puppy Linux and does not contribute to the forum or give anything back to Puppy Linux (as far as I can tell). He does not make any sort of contact. Some of the changes he makes are of very poor quality and I am somewhat embarassed that people might think I have anything to do with Simplicity - I do NOT!!
But thanks for asking....
Cheers
peebee
No worries, Peebee, as I had mentioned, soon as I saw him basically copy everything from you guys, off it went and I deleted what I had downloaded from it. Just wish there was a place I could write a review warning people if they want the "real thing", to come here (or your LXPup web page) and not there. Simplicity is a crock of lies, imho!
Thanks again for all you do.....
LxPup64
New hybrid - Top panel tray not able to 'resize - height' - Bottom tray works OK.
Get flash - install flash not working.
>>>---Indian------>
Get flash - install flash not working.
>>>---Indian------>
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
Re: LxPup64
Resizing top panel works fine for me - right click on the panel....see screeniesszindian wrote:New hybrid - Top panel tray not able to 'resize - height' - Bottom tray works OK.
Get flash - install flash not working.
>>>---Indian------>
Flash - known problem: http://murga-linux.com/puppy/viewtopic. ... 449#928449
Last edited by peebee on Tue 18 Oct 2016, 07:27, edited 1 time in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Top-Tray
What I did -
First increased the 'Bottom-Tray' to 55 in height (I like bottom tray larger also) and increased icons to 45
Then -
Tried to increase the 'Top-Tray' to 55 in height... it would not work.
So -
Dropping the height of the 'Bottom-Tray' back down to 34 and also decreasing the icon-size, I was able to increase the 'Top-Tray' to my desired height of 55 (also increased the icon-size where I wanted it)
What it looks like is you 'Can't Increase Both' top and bottom trays???
>>>---Indian------>
PS: Other than that little thing, the program is running well so far so on with the testing.
Oh... one more thing... phil was able to change a few things in the Tahr64 32-bit libs packet for Xenial64 to use them for 32-bit programs. any chance of the same for Slacko 32-bit libs? the old ones don't seem to cut it!
'Thanks'
First increased the 'Bottom-Tray' to 55 in height (I like bottom tray larger also) and increased icons to 45
Then -
Tried to increase the 'Top-Tray' to 55 in height... it would not work.
So -
Dropping the height of the 'Bottom-Tray' back down to 34 and also decreasing the icon-size, I was able to increase the 'Top-Tray' to my desired height of 55 (also increased the icon-size where I wanted it)
What it looks like is you 'Can't Increase Both' top and bottom trays???
>>>---Indian------>
PS: Other than that little thing, the program is running well so far so on with the testing.
Oh... one more thing... phil was able to change a few things in the Tahr64 32-bit libs packet for Xenial64 to use them for 32-bit programs. any chance of the same for Slacko 32-bit libs? the old ones don't seem to cut it!
'Thanks'
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
Re: Top-Tray
Hisszindian wrote:Tried to increase the 'Top-Tray' to 55 in height... it would not work.
What it looks like is you 'Can't Increase Both' top and bottom trays???
>>>---Indian------>
Oh... one more thing... phil was able to change a few things in the Tahr64 32-bit libs packet for Xenial64 to use them for 32-bit programs. any chance of the same for Slacko 32-bit libs? the old ones don't seem to cut it!
'Thanks'
No problem here.....
Right click bottom panel -> Panel Settings - adjust size
Right click top panel -> Panel Settings - adjust size
Both work simultaneously.....
32-bit libs is a question for 01micko.... suggest you post on the slacko7 thread....
Cheers
peebee
- Attachments
-
- Screenshot.png
- (119.86 KiB) Downloaded 968 times
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Tray(s)
Oh Boy.... Two independant tray functions.... I was trying to do both top and bottom tray from 'one-tray-function' somehow must of hit the right switch combo for my last post? Anyway good to know that!
The PPM hplip packages (slacko & salix) are both missing the 'libpython2.7.so.1.0' and don't work for HP scanners on All-In-One printers (print function works fine). I don't have one of these laying around (nor could I find a .pet of this anywhere) ?
>>>---Indian------>
The PPM hplip packages (slacko & salix) are both missing the 'libpython2.7.so.1.0' and don't work for HP scanners on All-In-One printers (print function works fine). I don't have one of these laying around (nor could I find a .pet of this anywhere) ?
>>>---Indian------>
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
hplip & python
Python is in the devx.sfs so probably this needs to be loaded.....sszindian wrote:The PPM hplip packages (slacko & salix) are both missing the 'libpython2.7.so.1.0'
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
LxPup64 - 64bit versions of Puppy with the LXDE desktop
I booted the live CD and ran the UEFI Installer-Flash Drives to a 32gb
Flash drive. It wouldn't install the files from the CD so I had to use
the iso.
# inxi -Fxz
System: Host: puppypc5555 Kernel: 4.1.32 x86_64 (64 bit gcc: 5.3.0) Desktop: LXDE (Openbox 3.6.1)
Distro: Slacko64 Puppy 6.9.6.4
Machine: System: Acer (portable) product: Aspire V5-571P v: V2.17
Mobo: Acer model: Aspire V5-571P v: V2.17 Bios: Phoenix v: V2.17 date: 02/27/2013
Battery BAT0: charge: 20.3 Wh 96.0% condition: 21.1/25.0 Wh (85%) model: SANYO AL12A32 status: N/A
CPU: Dual core Intel Core i3-3227U (-HT-MCP-) cache: 3072 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 7584
clock speeds: max: 1900 MHz 1: 812 MHz 2: 811 MHz 3: 887 MHz 4: 801 MHz
Graphics: Card: Intel 3rd Gen Core processor Graphics Controller bus-ID: 00:02.0
Display Server: X.org 1.18.3 drivers: intel (unloaded: fbdev,vesa)
tty size: 109x34 Advanced Data: N/A for root
Audio: Card Intel 7 Series/C210 Series Family High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0
Sound: Advanced Linux Sound Architecture v: k4.1.32
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: 2000 bus-ID: 02:00.2
IF: eth0 state: down mac: <filter>
Card-2: Broadcom Limited BCM43228 802.11a/b/g/n driver: bcma-pci-bridge bus-ID: 03:00.0
IF: wlan0 state: up mac: <filter>
Drives: HDD Total Size: 531.6GB (5.3% used) ID-1: /dev/sda model: ST500LT012 size: 500.1GB
ID-2: /dev/sdb model: DataTraveler_3.0 size: 31.5GB
Partition: ID-1: swap-1 size: 6.44GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 146 Uptime: 19 min Memory: 605.8/5754.6MB Init: SysVinit runlevel: 5 Gcc sys: 5.3.0
Client: Shell (bash 4.3.461) inxi: 2.3.0
# free
total used free shared buff/cache available
Mem: 5892704 119708 606572 421096 5166424 4821716
Swap: 6291452 0 6291452
#
I added inix and gkrellm with PPM, also added a cmus pet.
The touchsreen is working, haven't tested much yet.
video-info-glx 1.5.3 Tue 18 Oct 2016 on LxPup64 16.10 Linux 4.1.32 x86_64
2.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
X Server: Xorg Driver: evdev
X.Org version: 1.18.3
dimensions: 1366x768 pixels (361x203 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile
OpenGL core profile version string: 3.3 (Core Profile) Mesa 11.2.2
Intel(R) Core(TM) i3-3227U CPU @ 1.90GHz
Core 0: @821 1: @804 2: @814 3: @841 MHz
Flash drive. It wouldn't install the files from the CD so I had to use
the iso.
# inxi -Fxz
System: Host: puppypc5555 Kernel: 4.1.32 x86_64 (64 bit gcc: 5.3.0) Desktop: LXDE (Openbox 3.6.1)
Distro: Slacko64 Puppy 6.9.6.4
Machine: System: Acer (portable) product: Aspire V5-571P v: V2.17
Mobo: Acer model: Aspire V5-571P v: V2.17 Bios: Phoenix v: V2.17 date: 02/27/2013
Battery BAT0: charge: 20.3 Wh 96.0% condition: 21.1/25.0 Wh (85%) model: SANYO AL12A32 status: N/A
CPU: Dual core Intel Core i3-3227U (-HT-MCP-) cache: 3072 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 7584
clock speeds: max: 1900 MHz 1: 812 MHz 2: 811 MHz 3: 887 MHz 4: 801 MHz
Graphics: Card: Intel 3rd Gen Core processor Graphics Controller bus-ID: 00:02.0
Display Server: X.org 1.18.3 drivers: intel (unloaded: fbdev,vesa)
tty size: 109x34 Advanced Data: N/A for root
Audio: Card Intel 7 Series/C210 Series Family High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0
Sound: Advanced Linux Sound Architecture v: k4.1.32
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: 2000 bus-ID: 02:00.2
IF: eth0 state: down mac: <filter>
Card-2: Broadcom Limited BCM43228 802.11a/b/g/n driver: bcma-pci-bridge bus-ID: 03:00.0
IF: wlan0 state: up mac: <filter>
Drives: HDD Total Size: 531.6GB (5.3% used) ID-1: /dev/sda model: ST500LT012 size: 500.1GB
ID-2: /dev/sdb model: DataTraveler_3.0 size: 31.5GB
Partition: ID-1: swap-1 size: 6.44GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 146 Uptime: 19 min Memory: 605.8/5754.6MB Init: SysVinit runlevel: 5 Gcc sys: 5.3.0
Client: Shell (bash 4.3.461) inxi: 2.3.0
# free
total used free shared buff/cache available
Mem: 5892704 119708 606572 421096 5166424 4821716
Swap: 6291452 0 6291452
#
I added inix and gkrellm with PPM, also added a cmus pet.
The touchsreen is working, haven't tested much yet.
video-info-glx 1.5.3 Tue 18 Oct 2016 on LxPup64 16.10 Linux 4.1.32 x86_64
2.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
X Server: Xorg Driver: evdev
X.Org version: 1.18.3
dimensions: 1366x768 pixels (361x203 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile
OpenGL core profile version string: 3.3 (Core Profile) Mesa 11.2.2
Intel(R) Core(TM) i3-3227U CPU @ 1.90GHz
Core 0: @821 1: @804 2: @814 3: @841 MHz
- Attachments
-
- screenshot2.jpg
- (80.45 KiB) Downloaded 907 times
32-bit libs for LxPup64
Installed 01micko's new 32bit libs for 14.2 from his home-site...
They don't work with my 32-bit google earth .sfs (this version of google earth works with all my other pup's 32 or 64 bit)
terminal reports:
# googleearth
libGL error: unable to load driver: i915_dri.so
libGL error: driver pointer missing
libGL error: failed to load driver: i915
libGL error: unable to load driver: swrast_dri.so
libGL error: failed to load driver: swrast
Google Earth has caught signal 11.
Hope some other testor's try some 32-bit programs with these new libs.
>>>---Indian------>
They don't work with my 32-bit google earth .sfs (this version of google earth works with all my other pup's 32 or 64 bit)
terminal reports:
# googleearth
libGL error: unable to load driver: i915_dri.so
libGL error: driver pointer missing
libGL error: failed to load driver: i915
libGL error: unable to load driver: swrast_dri.so
libGL error: failed to load driver: swrast
Google Earth has caught signal 11.
Hope some other testor's try some 32-bit programs with these new libs.
>>>---Indian------>
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
Hifrourio wrote:Hi all,
I'm wondering what the current status of LxPup64 (Xenial) is currently?
Is it still reaaally experimental? Would you say that I could trust it as my main OS yet?
(Or is this the wrong thread and only for Slacko?)
There is no such build as LxPup64-Xenial I'm afraid....and unlikely to be...
Basically, the Ubuntu ways of dividing packages into smaller and smaller subdivisions plus the lack of standardisation on how lib and lib64 should relate in 64 builds makes such a build too difficult...
Slackware is much more sane!
Sorry.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Thanks Peebee.
That leads me to 3 more question though
1. How does Tahrpup do it then with the Ubuntu packages? (Is that because Tahrpup is a larger project and you're just a one-man-show?)
2. Is the Slacko 64 bit stable enough to run with as a main OS then?
3. How do Slacko and Ubuntu compare? Does one sacrifice on software if running a Slacko install? (Think I read once that Slackware is essentially a one-man-band, so you're kind of at the mercy of that guy? Could be confusing it with something else though.)
That leads me to 3 more question though
1. How does Tahrpup do it then with the Ubuntu packages? (Is that because Tahrpup is a larger project and you're just a one-man-show?)
2. Is the Slacko 64 bit stable enough to run with as a main OS then?
3. How do Slacko and Ubuntu compare? Does one sacrifice on software if running a Slacko install? (Think I read once that Slackware is essentially a one-man-band, so you're kind of at the mercy of that guy? Could be confusing it with something else though.)
1. LxPupTahr64 only ever appeared as an experiment in 10/2015 and had gvfs problems:frourio wrote:Thanks Peebee.
That leads me to 3 more question though
1. How does Tahrpup do it then with the Ubuntu packages? (Is that because Tahrpup is a larger project and you're just a one-man-show?)
2. Is the Slacko 64 bit stable enough to run with as a main OS then?
3. How do Slacko and Ubuntu compare? Does one sacrifice on software if running a Slacko install? (Think I read once that Slackware is essentially a one-man-band, so you're kind of at the mercy of that guy? Could be confusing it with something else though.)
http://www.murga-linux.com/puppy/viewto ... 240#868240
2. I'm not the best to answer this as I don't run 64-bit....best answer is to try it and see....frugal install tho!
3. Different repositories - different ethos (a Benign Dictator is often better than rule by Committee!) Also Ubuntu has gone down the systemd route which is an anathema to most Puppy-ists and can lead to dependency problems....a discussion better conducted on one of the more general threads....
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
LxPup64-17.05.0-uefi.iso (experimental)
superceded
Last edited by peebee on Wed 07 Jun 2017, 06:08, edited 2 times in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Re: LxPup64-17.05.0-uefi.iso (experimental)
peebee wrote:LxPup64-17.05.0-uefi.iso has been uploaded - md5=04c1c60454b55beeaf8f0f31340c211f
This is a derivative of Slacko64-700-Beta3 (slacko64-6.9.6.7) with kernel 4.4.67
This iso is an experiment to see if LxPup64 can be built on top of Slacko64-7 and the iso will be replaced by 17.0x.1 once Slacko64-700 is released.
The iso is BIG mainly because Firefox and LibreOffice are included in the adrv
Wow, Peebee, what a difference this 4.4.67 kernel makes (in latest slacko64 it runs great, and in your lxpup64). At least on my older stuff. Thanks
- Attachments
-
- LxPup64-17.05.png
- (26.55 KiB) Downloaded 2307 times
-
- With-kernel-4.4.67.png
- (11.12 KiB) Downloaded 2317 times
-
- and-redshift-too1..;-)...png
- (7.4 KiB) Downloaded 2303 times