tahrpup 6.0.5 CE
Hello.
What driver (and where) should I look for this graphics card:
ATI Radeon 9250/9200, AGP, 128MB, VGA + S-VHS
xorgwizard will not give usable picture.
Appears to work OOTB with BodhiLinux, unfortunately I don't remember
the passwords for it to dig deeper.
PS. the model name: Radeon 9250/9200 or "9200 series" is from WinXP properties
One of the few cards that fits this computer casing.. for height.
What driver (and where) should I look for this graphics card:
ATI Radeon 9250/9200, AGP, 128MB, VGA + S-VHS
xorgwizard will not give usable picture.
Appears to work OOTB with BodhiLinux, unfortunately I don't remember
the passwords for it to dig deeper.
PS. the model name: Radeon 9250/9200 or "9200 series" is from WinXP properties
One of the few cards that fits this computer casing.. for height.
-
- Posts: 98
- Joined: Mon 17 Oct 2016, 05:11
torm wrote:
> What driver (and where) should I look for this graphics card:
> ATI Radeon 9250/9200, AGP, 128MB, VGA + S-VHS
> xorgwizard will not give usable picture.
I am afraid that AGP based graphics cards do not work well with Tahrpup, due to KMS(kernel mode setting) which is a default on Tahrpup.
So, I still use Puppy 4 series and Lupu 528 on ThinkPad T42, whose video card is ATI Radeon Mobility 7500.
> What driver (and where) should I look for this graphics card:
> ATI Radeon 9250/9200, AGP, 128MB, VGA + S-VHS
> xorgwizard will not give usable picture.
I am afraid that AGP based graphics cards do not work well with Tahrpup, due to KMS(kernel mode setting) which is a default on Tahrpup.
So, I still use Puppy 4 series and Lupu 528 on ThinkPad T42, whose video card is ATI Radeon Mobility 7500.
Graphics adrive for X-Tahr 2.0
Graphics adrive for X-Tahr 2.0 installed on my Tahrpup .
Its so full featured for photographic works as Libre Office for typists.
Shotwell ? is included in Tahrpup 6.0.5 (Triton petihar)
Its so full featured for photographic works as Libre Office for typists.
Shotwell ? is included in Tahrpup 6.0.5 (Triton petihar)
- Attachments
-
- shotwell.jpg
- Easy to install ?
- (58.01 KiB) Downloaded 960 times
Last edited by Pelo on Sat 30 Sep 2017, 06:55, edited 1 time in total.
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
palemoon 27.1.0 segfaults on tahrpup-6.0.6
Hi,
just got this palemoons segfault after less than 10 minutes browsing:
(I restarted palemoon from console to get error comments and reproduced the segmentation fault):
HTH, Charlie
just got this palemoons segfault after less than 10 minutes browsing:
(I restarted palemoon from console to get error comments and reproduced the segmentation fault):
Code: Select all
root# palemoon
(pale moon:20600): GLib-GObject-WARNING **: Attempt to add property GnomeProgram::sm-connect after class was initialised
(pale moon:20600): GLib-GObject-WARNING **: Attempt to add property GnomeProgram::show-crash-dialog after class was initialised
(pale moon:20600): GLib-GObject-WARNING **: Attempt to add property GnomeProgram::display after class was initialised
(pale moon:20600): GLib-GObject-WARNING **: Attempt to add property GnomeProgram::default-icon after class was initialised
ATTENTION: default value of option force_s3tc_enable overridden by environment.
Segmentation fault
root#
Try updating Pale Moon to the latest version. 27.4.2
menu>Internet>Palemoon-updater
menu>Internet>Palemoon-updater
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
-
- Posts: 179
- Joined: Fri 02 Jan 2009, 06:49
Can anyone help me get a Chromium-based browser functional on Tahr?
Using 32bit Tahr on my HP laptop, *any* chromium-based browser crashes the system. Be it Slimjet, Chrome or Chromium, it will sometimes run for 10 seconds or so, sometimes instantly will blank the screen, permanently.
I can type 'reboot' and the system reboots (but I can't see what I type).
This happens before or after downloading the bugfixes, with .pet installs or sfs installs, there's no change.
Any way to get one of these browsers working? It makes it easier to stream my music and watch videos on bitchute.com which doesn't work in Palemoon.
Many thanks,
Greg
PS No such problems on Tahr64 on my desktop
Using 32bit Tahr on my HP laptop, *any* chromium-based browser crashes the system. Be it Slimjet, Chrome or Chromium, it will sometimes run for 10 seconds or so, sometimes instantly will blank the screen, permanently.
I can type 'reboot' and the system reboots (but I can't see what I type).
This happens before or after downloading the bugfixes, with .pet installs or sfs installs, there's no change.
Any way to get one of these browsers working? It makes it easier to stream my music and watch videos on bitchute.com which doesn't work in Palemoon.
Many thanks,
Greg
PS No such problems on Tahr64 on my desktop
-
- Posts: 902
- Joined: Mon 22 Jun 2009, 01:36
- Location: Philadelphia, PA
Chromium-based browser
Greg, I'm using the Iron browser 58.0.3050.0 with tahrpup 6.0.6 on this Dell Latitude E6410redandwhitestripes wrote:Using 32bit Tahr on my HP laptop, *any* chromium-based browser crashes the system. Be it Slimjet, Chrome or Chromium
Dell E6410: BusterPup, BionicPup64, Xenial, etc
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P
An old trick by mikeb:
http://www.murga-linux.com/puppy/viewto ... 213#728213
I do not know if it is still working in modern puppies.
http://www.murga-linux.com/puppy/viewto ... 213#728213
I do not know if it is still working in modern puppies.
thanks watchdog .watchdog wrote:An old trick by mikeb:
http://www.murga-linux.com/puppy/viewto ... 213#728213
I do not know if it is still working in modern puppies.
I guess it's change a little, looked into /initrd/pup_rw/ but found no clues.
I did find a wh. file in /opt/palemoon, deleted it, rebooted - but did not unhide palemoon.
Iv'e copied palemoon from a fresh save file into to my save folder but it's too messy for my liking - no menu entry, no default browser option to set to palemoon and no palemoon updater has been un-hidden.
-
- Posts: 88
- Joined: Mon 22 May 2006, 18:43
Configure xorg.conf manually.thinkpadfreak wrote:torm wrote:
> What driver (and where) should I look for this graphics card:
> ATI Radeon 9250/9200, AGP, 128MB, VGA + S-VHS
> xorgwizard will not give usable picture.
I am afraid that AGP based graphics cards do not work well with Tahrpup, due to KMS(kernel mode setting) which is a default on Tahrpup.
So, I still use Puppy 4 series and Lupu 528 on ThinkPad T42, whose video card is ATI Radeon Mobility 7500.
You should have this at Device section, grabbed from my Thinkpad T42 conf. Options added are for use with KMS, open source radeon driver is built-in with tahrpup
Code: Select all
Section "Device"
Identifier "Card0"
Driver "ati"
Option "AccelMethod" "exa"
Option "ColorTiling" "on"
Option "EnablePageFlip" "on"
Option "SwapBuffersWait" "off"
Option "TearFree" "off"
EndSection
However, Mesalib 10.x has some issues with Opera, fixed in version 11.x and later. I hope someone make a last upgrade for Tahrpup, Mesalib at that versions is hard to compile
-
- Posts: 179
- Joined: Fri 02 Jan 2009, 06:49
Re: Chromium-based browser
This worked, thank you SO much! I have no idea why the others crash but now I can stream my music at work so I'm happy!sheldonisaac wrote:Greg, I'm using the Iron browser 58.0.3050.0 with tahrpup 6.0.6 on this Dell Latitude E6410redandwhitestripes wrote:Using 32bit Tahr on my HP laptop, *any* chromium-based browser crashes the system. Be it Slimjet, Chrome or Chromium
-
- Posts: 98
- Joined: Mon 17 Oct 2016, 05:11
chillinfart wrote:
> Configure xorg.conf manually.
Thank you for advice.
I am afraid that under KMS, most of the optional settings are ignored.
I tried to set "GARTSize" "32", only to fail.
Moreover, under KMS, VRAM is limited to about 26MB though my T42 has 32MB.
I rewrote /etc/modprobe.d/radeon.conf to disable KMS, but X failed to start.
On Precise 571, ati driver (no KMS) can be selected through xorgwizard, but GLX is disabled by default under "no KMS."
Since neither Precise nor Tahrpup is satisfactory, I mainly use Lupu 528.
EDIT: I think that the newer Puppies (more precisely the newer kernels) do not fit old computers, so it can't be helped. ThinkPad T42 is more than 12 years old.
> Configure xorg.conf manually.
Thank you for advice.
I am afraid that under KMS, most of the optional settings are ignored.
I tried to set "GARTSize" "32", only to fail.
Moreover, under KMS, VRAM is limited to about 26MB though my T42 has 32MB.
I rewrote /etc/modprobe.d/radeon.conf to disable KMS, but X failed to start.
On Precise 571, ati driver (no KMS) can be selected through xorgwizard, but GLX is disabled by default under "no KMS."
Since neither Precise nor Tahrpup is satisfactory, I mainly use Lupu 528.
EDIT: I think that the newer Puppies (more precisely the newer kernels) do not fit old computers, so it can't be helped. ThinkPad T42 is more than 12 years old.
Tahrpup64 6..0.5 CE
This message is for Torm at the top of page 115. I have been using Tahrpup 6.0.5 and Tahrpup 6.0.6 frugally installed with a save folder in a P4 3.0 ghz cpu with an AGP 8X 4X ATI All in wonder 9600 64 mb ddr with 1 gb of ram and a 2 gb swap file and a 17 inch lcd monitor. I have been using this for the last year or so just the way it installed from the iso cd with no changes and have had zero problems with Palemoon or anything else so far.
PS The television still works using XP also.
Thanks
Bird Dog
PS The television still works using XP also.
Thanks
Bird Dog
Frugal Xenialpup 64, Bionicpup 64 save folder on core2 quad Q6600 2 gigs ram, AMD 6 core 4 gigs ram. Frugal Xenialpup 32, Bionicpup 32 save folder on P4 3.0 ghz 1 gig ram, Dell P4 Celeron 2.4 ghz 1 gig ram
Hi,
I have posted this message in the bugs part but no reponses.
So i try here : i can't thing i m the only one to have this problem.
I'm with tarhpup 6.0.5 and all quickpet updates made.
I get a problem when i want to print with a recent firefox, glabels and thunderbird, all gtk3 applications : when i want to print the software closes.
I get this error in the terminal
Code:
symbol lookup error: /usr/lib/i386-linux-gnu/gtk-3.0/3.0.0/printbackends/libprintbackend-cups.so: undefined symbol: ippSetOperation
It seems there is a compatibility problem between cups and gtk3.
Cups is in 1.5.3 version.
Thanks for your help,
Philippe
I have posted this message in the bugs part but no reponses.
So i try here : i can't thing i m the only one to have this problem.
I'm with tarhpup 6.0.5 and all quickpet updates made.
I get a problem when i want to print with a recent firefox, glabels and thunderbird, all gtk3 applications : when i want to print the software closes.
I get this error in the terminal
Code:
symbol lookup error: /usr/lib/i386-linux-gnu/gtk-3.0/3.0.0/printbackends/libprintbackend-cups.so: undefined symbol: ippSetOperation
It seems there is a compatibility problem between cups and gtk3.
Cups is in 1.5.3 version.
Thanks for your help,
Philippe
Try to upgrade to tahr 6.0.6 Cups 1.7.5. No problems here printing from firefox 56.0.1.augras wrote: I'm with tarhpup 6.0.5 and all quickpet updates made.
I get a problem when i want to print with a recent firefox, glabels and thunderbird, all gtk3 applications : when i want to print the software closes.
I get this error in the terminal
Code:
symbol lookup error: /usr/lib/i386-linux-gnu/gtk-3.0/3.0.0/printbackends/libprintbackend-cups.so: undefined symbol: ippSetOperation
It seems there is a compatibility problem between cups and gtk3.
Cups is in 1.5.3 version.
Should be able to use the 6.0.5 tahrsave with the 6.0.6 install.
Just copy the save to the 6.0.6 install.
When you boot 6.0.6 it should update the save.
If you already made a save for 6.0.6, replace it with the one from 6.0.5
Just copy the save to the 6.0.6 install.
When you boot 6.0.6 it should update the save.
If you already made a save for 6.0.6, replace it with the one from 6.0.5
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)