This is what i get (on the machine in my sig):
Code: Select all
# arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC272 Analog [ALC272 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
#
.
Code: Select all
# arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC272 Analog [ALC272 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
#
I think you should set:CatDude wrote:Hello Watchdog
This is what i get (on the machine in my sig):CatDudeCode: Select all
# arecord -l **** List of CAPTURE Hardware Devices **** card 0: SB [HDA ATI SB], device 0: ALC272 Analog [ALC272 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 #
.
Code: Select all
load-module module-alsa-sink device=hw:0,0
load-module module-alsa-source device=hw:0,0
As i poited out in my earlier post:watchdog wrote:..I think you should set:
in /usr/etc/pulse/default.pa as found out by OscarTalks.Code: Select all
load-module module-alsa-sink device=hw:0,0 load-module module-alsa-source device=hw:0,0
I didn't need to do anthing with the 'sink' line as everything works OKCatDude wrote:..i have sound + microphone working (i use a headset) using either of these lines in: /usr/etc/pulse/default.paCode: Select all
load-module module-alsa-source device=hw:0
Code: Select all
load-module module-alsa-source device=hw:0,0
Code: Select all
chown -R spot:spot spot
Code: Select all
arecord -l
Code: Select all
load-module module-alsa-sink
load-module module-alsa-source device=hw:x,0
Code: Select all
load-module module-alsa-sink device=hw:0,0
load-module module-alsa-source device=hw:0,0
No problem here running it as root in fresh frugal of Slacko-5.7watchdog wrote:...I can't start pulseaudio as root
Code: Select all
load-module module-alsa-source device=hw:0,0
Hi OscarTalksOscarTalks wrote:I took the dynamic version of Skype 4.3.0.37 from the website and repacked it along with 01micko's Qt libraries (including the plugins for avatar support) as before.
My pulseaudio-2.0-test.pet reduces the size of pulseaudio-2.0.w53orig.pet from 5977 K down to 1059 K and still works for me, so quite a significant reduction!
Both of these are uploaded to http://smokey01.com/OscarTalks for now. Strictly for testing of course, always take the usual precautions.
Proposed changes didn't work.watchdog wrote:text
I couldn't test audio/video yet but the SFS for Slacko seems to work in OB-Precise 14.07.26, I only had to install libpng. I didn't install pulse-audio, I wonder if the screenshot attached below means I already have it built in.peebee wrote:Hi OscarTalksOscarTalks wrote:I took the dynamic version of Skype 4.3.0.37 from the website and repacked it along with 01micko's Qt libraries (including the plugins for avatar support) as before.
My pulseaudio-2.0-test.pet reduces the size of pulseaudio-2.0.w53orig.pet from 5977 K down to 1059 K and still works for me, so quite a significant reduction!
Both of these are uploaded to http://smokey01.com/OscarTalks for now. Strictly for testing of course, always take the usual precautions.
Working well here - both cam and mic with your provided default.pa - many thanks.
I've put the 2 pulseaudio lines into /usr/bin/skype - running as root - no need for "su spot".
Cheers
peebee
Thanks for advice.DM was on fire! wrote:By the way, those of you seeking a method to log into Skype with 4.2, don't bother. Support for it is dead and gone.
Confirmed. As root pulseaudio gives a warning but it starts and skype works. Tried my original pets in wary and the new OscarTalks' pets in slacko. I don't remember why I decided to run pulseaudio as spot user: I have experienced several pulseaudio's start fails in my attempts.CatDude wrote:Hi
No problem here running it as root in fresh frugal of Slacko-5.7watchdog wrote:...I can't start pulseaudio as root
.
Try these settings in /usr/etc/pulse/default.pa:DM was on fire! wrote:Proposed changes didn't work.watchdog wrote:text
Code: Select all
load-module module-alsa-sink device=dmix
load-module module-alsa-source device=dsnoop