TahrPup 5.8.4
network_roxapp-0.8-1-utf8.pet
The network_roxapp in Tahr Precise 5.8.0.8 complains error message when copying a file.
Icon fix, mount options, utf.8 as the default
network_roxapp-0.8-1-utf8.pet
http://shino.pos.to/party/bridge.cgi?puppy/opt/
I think utf8 to be the default because recent woof takes its default locale as en_US.UTF8.
Icon fix, mount options, utf.8 as the default
network_roxapp-0.8-1-utf8.pet
http://shino.pos.to/party/bridge.cgi?puppy/opt/
I think utf8 to be the default because recent woof takes its default locale as en_US.UTF8.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
cups
Tried all the fix's mentioned here, still no printer recognized for the HP usb1050 all-in-one!
Simple 'Peasy Scan' 'DOES' recognize the printer and takes a scan but no print!!!
Xsane installs and makes menu entry but when clicked on, NOTHING!
Everything else tested appears to be working OK so far.
>>>---Indian------>
Simple 'Peasy Scan' 'DOES' recognize the printer and takes a scan but no print!!!
Xsane installs and makes menu entry but when clicked on, NOTHING!
Everything else tested appears to be working OK so far.
>>>---Indian------>
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
save_to_directory PET
You can test save-to directory on Tarh Puppy.
save_to_directory-20140606.pet
http://shino.pos.to/party/bridge.cgi?pu ... psave_dir/
1. Install Tahr Puppy frugally on a Linux partition.
2 Boot Tahr Puppy with RAM mode ('pfix=ram' option).
3. Install save_to_directory-20140606.pet.
4. Shotdown or reboot and make pupsave as a folder.
Visit the topic on save_to_directory:
http://www.murga-linux.com/puppy/viewtopic.php?t=93559
save_to_directory-20140606.pet
http://shino.pos.to/party/bridge.cgi?pu ... psave_dir/
1. Install Tahr Puppy frugally on a Linux partition.
2 Boot Tahr Puppy with RAM mode ('pfix=ram' option).
3. Install save_to_directory-20140606.pet.
4. Shotdown or reboot and make pupsave as a folder.
Visit the topic on save_to_directory:
http://www.murga-linux.com/puppy/viewtopic.php?t=93559
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
cups
rcrsn51 wrote:
What Tahr ISO version are you testing? I have tahrpup-5.8.0.8.iso.
-----------------------------------------------------------------------------------------------
I too have the tahrpup-5.8.0.8
>>>---Indian------>
What Tahr ISO version are you testing? I have tahrpup-5.8.0.8.iso.
-----------------------------------------------------------------------------------------------
I too have the tahrpup-5.8.0.8
>>>---Indian------>
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
a warning to people installing stuff from the PPM ....
some packages 'xbmc' for example have a libudev1 as a dependency. tahr puppy already has it's own libudev1 and installing the one from the PPM breaks lots of things .... network, sound & graphics.
so if you see libudev as a dependency untick it before installing your chosen package.
i'll fix this in the next tahrpup
some packages 'xbmc' for example have a libudev1 as a dependency. tahr puppy already has it's own libudev1 and installing the one from the PPM breaks lots of things .... network, sound & graphics.
so if you see libudev as a dependency untick it before installing your chosen package.
i'll fix this in the next tahrpup
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
@sszindian: Don't forget that some HP units need a reset after running in scanner mode before the printer will work again.
I did a clean boot of tahrpup-5.8.0.8.iso and added the gstoraster_s533-9.05.pet.
I installed my HP Deskjet f4280 using the version of HPLIP already in Tahr. It worked correctly.
I then did a simulated install of your Deskjet 1050. It also worked.
I did a clean boot of tahrpup-5.8.0.8.iso and added the gstoraster_s533-9.05.pet.
I installed my HP Deskjet f4280 using the version of HPLIP already in Tahr. It worked correctly.
I then did a simulated install of your Deskjet 1050. It also worked.
cups
rcrsn51 wrote:
Don't forget that some HP units need a reset after running in scanner mode before the printer will work again.
sszindian: Yes, well aware of that from the past, I reset and even rebooted several times.
-------------------------------------------------------
rcrsn51 wrote: I installed my HP Deskjet f4280 using the version of HPLIP already in Tahr. It worked correctly.
sszindian: Where are you finding this? I don't see a menu entry for it in my 5.8.0.8 ?
>>>---Indian------>
Don't forget that some HP units need a reset after running in scanner mode before the printer will work again.
sszindian: Yes, well aware of that from the past, I reset and even rebooted several times.
-------------------------------------------------------
rcrsn51 wrote: I installed my HP Deskjet f4280 using the version of HPLIP already in Tahr. It worked correctly.
sszindian: Where are you finding this? I don't see a menu entry for it in my 5.8.0.8 ?
>>>---Indian------>
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
Re: cups
If CUPS is auto-detecting the printer, it should appear at the top of the models list.sszindian wrote:Where are you finding this? I don't see a menu entry for it in my 5.8.0.8 ?
If you don't have an entry, how are you installing the printer?
Is your problem at the hardware device detection phase or at the driver selection phase?
cups
rcrsn wrote: If CUPS is auto-detecting the printer, it should appear at the top of the models list.
sszindian: NO models list that I can see?
rcrsn wrote: If you don't have an entry, how are you installing the printer?
sszindian: By way of browser- http://localhost:631 Also tried by way of desktop 'SETUP' also tried by way of regular menu entry System/cups manage printing, then use 'Find New Printers' from cups.
rcrsn wrote: Is your problem at the hardware device detection phase or at the driver selection phase?
sszindian: It would appear that it's at the hardware device as the option to install the PDF printer is the only listing that I get that's available for installation.
Might be possible I have a BAD download or install of tahar??? However, everything else seems to work OK.
>>>---Indian------>
sszindian: NO models list that I can see?
rcrsn wrote: If you don't have an entry, how are you installing the printer?
sszindian: By way of browser- http://localhost:631 Also tried by way of desktop 'SETUP' also tried by way of regular menu entry System/cups manage printing, then use 'Find New Printers' from cups.
rcrsn wrote: Is your problem at the hardware device detection phase or at the driver selection phase?
sszindian: It would appear that it's at the hardware device as the option to install the PDF printer is the only listing that I get that's available for installation.
Might be possible I have a BAD download or install of tahar??? However, everything else seems to work OK.
>>>---Indian------>
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
OK. If your problem is at the initial device-detection screen, then there is ZERO point to installing other driver packages.
I plugged a bunch of USB printers into my Tahr setup and CUPS auto-detected them all, even before I installed any patches.
So I have no idea why you have this problem. Have you tried a clean download and install?
I notice that seven people have downloaded the gstoraster PET. It would be really nice if some of them would report back. But that's the way Puppy development works.
I plugged a bunch of USB printers into my Tahr setup and CUPS auto-detected them all, even before I installed any patches.
So I have no idea why you have this problem. Have you tried a clean download and install?
I notice that seven people have downloaded the gstoraster PET. It would be really nice if some of them would report back. But that's the way Puppy development works.
cups
rcrsn51...'thanks as always!'
I believe I'll try the fresh download and install before anything else, might get to that tonight... If you're getting working printers, good enough for me. Oh... I was one who downloaded that program.pet you mentioned but it made no difference on my end .
>>>---Indian------>
I believe I'll try the fresh download and install before anything else, might get to that tonight... If you're getting working printers, good enough for me. Oh... I was one who downloaded that program.pet you mentioned but it made no difference on my end .
>>>---Indian------>
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
I know how that is. I had over a thousand downloads of slacko-5.7 alpha-beta-rc with the same 15 or so testers. It's always hard to say whether those folks that didn't report thought it was just great and didn't bother saying or thought it was rubbish and the same.rcrsn51 wrote:I notice that seven people have downloaded the gstoraster PET. It would be really nice if some of them would report back. But that's the way Puppy development works.
Anyway, back on topic, my cups shared printer (on my puppy NAS box) gets detected and prints ok in tahr.
Puppy Linux Blog - contact me for access
Yes I'll get back, but it won't be until tomorrow night (my time).Could you plug it in as a local USB printer and report back? That's the crucial issue here.
Puppy Linux Blog - contact me for access
cups
(1)Fresh download tahr-5.8.0.8 (downloaded with Racy-5.5, checksum varified)
(2)Created new savefile (different HDD)
(3)Installed hplip-14's (from rcrsn51 thread)
(4)Installed tahrfix-5.8.0.8.pet
Same as with previous tahr-5.8.0.8, cups will NOT recognize my HP USB 1050 All-In-One Printer!!!!!! Only available printer available for setup is the PFD Printer in cups.
I will have to conclude that it's 'tahr' that has the issue and not myself or my equipment.
>>>---Indian------>
(2)Created new savefile (different HDD)
(3)Installed hplip-14's (from rcrsn51 thread)
(4)Installed tahrfix-5.8.0.8.pet
Same as with previous tahr-5.8.0.8, cups will NOT recognize my HP USB 1050 All-In-One Printer!!!!!! Only available printer available for setup is the PFD Printer in cups.
I will have to conclude that it's 'tahr' that has the issue and not myself or my equipment.
>>>---Indian------>
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
Here are some things to try.
1. Go to the folder /usr/lib/cups/backend
2. Open a terminal
3. Type: ./usb
Does it find anything?
Then go to the folder /dev. Turn the printer off and on several times. Do you see the folder "usb" being created/deleted?
With your printer turned ON, type
Is this module loaded? If not, load it
Check your printer in CUPS.
1. Go to the folder /usr/lib/cups/backend
2. Open a terminal
3. Type: ./usb
Does it find anything?
Then go to the folder /dev. Turn the printer off and on several times. Do you see the folder "usb" being created/deleted?
With your printer turned ON, type
Code: Select all
lsmod | grep usblp
Code: Select all
modprobe usblp
cups
Here are some things to try.
1. Go to the folder /usr/lib/cups/backend
2. Open a terminal
3. Type: ./usb
Does it find anything?
sszindian: it says- bash: ./usb: No such file or directory/dev
Then go to the folder /dev. Turn the printer off and on several times. Do you see the folder "usb" being created/deleted?
sszindian: No
With your printer turned ON, type
Code:
lsmod | grep usblp
Is this module loaded? If not, load it
Code:
modprobe usblp
Check your printer in CUPS.
sszindian: Nope, not there!
1. Go to the folder /usr/lib/cups/backend
2. Open a terminal
3. Type: ./usb
Does it find anything?
sszindian: it says- bash: ./usb: No such file or directory/dev
Then go to the folder /dev. Turn the printer off and on several times. Do you see the folder "usb" being created/deleted?
sszindian: No
With your printer turned ON, type
Code:
lsmod | grep usblp
Is this module loaded? If not, load it
Code:
modprobe usblp
Check your printer in CUPS.
sszindian: Nope, not there!
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
Are you saying that your folder /usr/lib/cups/backend does NOT contain the executable file named "usb"?
If you do NOT have this file, then it certainly explains your problem.
But it does not explain why this file is missing. I have it in my Tahr.
If you do NOT have this file, then it certainly explains your problem.
But it does not explain why this file is missing. I have it in my Tahr.
You never answered this question.Is this module loaded?
cups
Maybe a couple pictures will explain what you ask?
>>>---Indian------>
>>>---Indian------>
- Attachments
-
- cups-2.png
- (10.76 KiB) Downloaded 908 times
-
- cups-1.png
- (31.74 KiB) Downloaded 924 times
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]