Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Tue 02 Sep 2014, 15:28
All times are UTC - 4
 Forum index » House Training » Beginners Help ( Start Here)
Puppy fail to get Internet. Win 8.1 just works [Solved]
Moderators: Flash, Ian, JohnMurga
Post new topic   Reply to topic View previous topic :: View next topic
Page 2 of 2 [27 Posts]   Goto page: Previous 1, 2
Author Message
ardvark


Joined: 01 Jul 2013
Posts: 950
Location: USA

PostPosted: Thu 27 Mar 2014, 14:53    Post subject:  

nooby wrote:
I failed to follow your instruction or you assumed me
familiar with what to do anyway it says such command
does not exist?
demsq: command not found


Hi...

Cut and paste from the code I included above. You misspelled the command. It's "dmesg" Wink
Back to top
View user's profile Send private message 
nooby

Joined: 29 Jun 2008
Posts: 10557
Location: SwedenEurope

PostPosted: Fri 28 Mar 2014, 01:08    Post subject:  

ardvark wrote:
nooby wrote:
I failed to follow your instruction or you assumed me
familiar with what to do anyway it says such command
does not exist?
demsq: command not found


Hi...

Cut and paste from the code I included above. You misspelled the command. It's "dmesg" Wink


Tested dmesq with G or Q small none of them worked
so I seems blind to the real spelling.

What went wrong?

What you forgot to tell me is in what order should I hit Enter
in between like this???

ifconfig Enter
dmesg Enter

ifconfiq dmesg Enter.

I understand that if one are familiar with how to use
Consol or Terminal then one knows such basic things.
Well I don't

Anyway if I write that command alone it still say it does
not have it so ifconfig seems to not change how dmesg behaves.

I can not cut and paste because it is not obvious to me
what I should copy and paste. Wait I check again. I get back

_________________
I use Google Search on Puppy Forum
not an ideal solution though
Back to top
View user's profile Send private message 
nooby

Joined: 29 Jun 2008
Posts: 10557
Location: SwedenEurope

PostPosted: Fri 28 Mar 2014, 01:11    Post subject:  

Wow the longest answer I ever got using Terminal.

And I must have spelled it wrong you where right I do apology.

But what to do with that superlong answer? What to look for?

sh-4.1# dmesg
(reserved)
BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable)
BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.4 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0xbfee0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 01800000
found SMP MP-table at [c00f3ec0] f3ec0
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 15000-1a000
RAMDISK: 7fe1f000 - 7ffef703
Allocated new RAMDISK: 00100000 - 002d0703
Move RAMDISK from 000000007fe1f000 - 000000007ffef702 to 00100000 - 002d0702
ACPI: RSDP 000f7dd0 00014 (v00 HPQOEM)
ACPI: RSDT bfee3040 0003C (v01 HPQOEM SLIC-CPC 42302E31 NVDA 00000000)
ACPI: FACP bfee30c0 00074 (v01 HPQOEM SLIC-CPC 42302E31 NVDA 00000000)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20091214/tbfadt-557)
ACPI: DSDT bfee3180 052D7 (v01 HPQOEM SLIC-CPC 00001000 MSFT 03000000)
ACPI: FACS bfee0000 00040
ACPI: SSDT bfee85c0 00248 (v01 HPQOEM SLIC-CPC 00000001 LTP 00000001)
ACPI: HPET bfee8880 00038 (v01 HPQOEM SLIC-CPC 42302E31 NVDA 00000098)
ACPI: SLIC bfee8900 00176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
ACPI: MCFG bfee8ac0 0003C (v01 HPQOEM SLIC-CPC 42302E31 NVDA 00000000)
ACPI: APIC bfee84c0 00098 (v01 HPQOEM SLIC-CPC 42302E31 NVDA 00000000)
ACPI: Local APIC address 0xfee00000
2182MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00016000 - 0001cf00
(14 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0001000000 - 000144c744] TEXT DATA BSS ==> [0001000000 - 000144c744]
#3 [000144d000 - 0001453748] BRK ==> [000144d000 - 0001453748]
#4 [00000f3ed0 - 0000100000] BIOS reserved ==> [00000f3ed0 - 0000100000]
#5 [00000f3ec0 - 00000f3ed0] MP-table mpf ==> [00000f3ec0 - 00000f3ed0]
#6 [000009b800 - 00000f2354] BIOS reserved ==> [000009b800 - 00000f2354]
#7 [00000f24a0 - 00000f3ec0] BIOS reserved ==> [00000f24a0 - 00000f3ec0]
#8 [00000f2354 - 00000f24a0] MP-table mpc ==> [00000f2354 - 00000f24a0]
#9 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000]
#10 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000]
#11 [0000015000 - 0000016000] PGTABLE ==> [0000015000 - 0000016000]
#12 [0000100000 - 00002d0703] NEW RAMDISK ==> [0000100000 - 00002d0703]
#13 [0000016000 - 000001d000] BOOTMAP ==> [0000016000 - 000001d000]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x000bfee0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009b
0: 0x00000100 -> 0x000bfee0
On node 0 totalpages: 786027
free_area_init_node: node 0, pgdat c13c1ac0, node_mem_map c1455200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3947 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 4366 pages used for memmap
HighMem zone: 554452 pages, LIFO batch:31
Using APIC driver default
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
Allocating PCI resources starting at bff00000 (gap: bff00000:30100000)
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @c3000000 s25816 r0 d23336 u1048576
pcpu-alloc: s25816 r0 d23336 u1048576 alloc=1*4194304
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779885
Kernel command line: PMEDIA=atahd PDEV1=sda1 psubdir=lupu005 pfix=fsck
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:000bfee0)
Memory: 3110972k/3144576k available (2614k kernel code, 31948k reserved, 1250k data, 328k init, 2235272k highmem)
virtual kernel memory layout:
fixmap : 0xfff6a000 - 0xfffff000 ( 596 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc13c7000 - 0xc1419000 ( 328 kB)
.data : 0xc128d936 - 0xc13c62e0 (1250 kB)
.text : 0xc1000000 - 0xc128d936 (2614 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:384
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2310.519 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4621.03 BogoMIPS (lpj=9242076)
Mount-cache hash table entries: 512
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
Checking 'hlt' instruction... OK.
ACPI: Core revision 20091214
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) Dual Core Processor 4450e stepping 02
Booting Node 0, Processors #1
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (9242.08 BogoMIPS).
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x8000-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xefffffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x1c00-0x1c7e] invalid; aligning end to 4-byte boundary
pci_root PNP0A08:00: host bridge window [io 0x1c00-0x1c7f] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xfec80000-0xfecbffff] (ignored)
pci 0000:00:01.0: reg 18: [io 0x1d00-0x1dff]
pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f]
pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
pci 0000:00:01.1: reg 24: [io 0xf400-0xf43f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:05.0: reg 10: [mem 0xfe024000-0xfe027fff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
pci 0000:00:07.0: reg 10: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:07.0: reg 14: [io 0xec00-0xec07]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7]
pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3]
pci 0000:00:08.0: reg 18: [io 0x0970-0x0977]
pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73]
pci 0000:00:08.0: reg 20: [io 0xd800-0xd80f]
pci 0000:00:08.0: reg 24: [mem 0xfe02c000-0xfe02cfff]
pci 0000:00:08.1: reg 10: [io 0x09e0-0x09e7]
pci 0000:00:08.1: reg 14: [io 0x0be0-0x0be3]
pci 0000:00:08.1: reg 18: [io 0x0960-0x0967]
pci 0000:00:08.1: reg 1c: [io 0x0b60-0x0b63]
pci 0000:00:08.1: reg 20: [io 0xc400-0xc40f]
pci 0000:00:08.1: reg 24: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:01:09.0: reg 10: [mem 0xfdeff000-0xfdeff7ff]
pci 0000:01:09.0: reg 14: [io 0xbc00-0xbc7f]
pci 0000:01:09.0: supports D2
pci 0000:01:09.0: PME# supported from D2 D3hot D3cold
pci 0000:01:09.0: PME# disabled
pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff pref]
pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:02:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:02:00.0: reg 24: [io 0xac00-0xac7f]
pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:09.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:0b.0: PCI bridge to [bus 03-03]
pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:00:0c.0: PCI bridge to [bus 04-04]
pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 1Cool *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0
ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 23) *0
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:01: [io 0x1000-0x107f] has been reserved
system 00:01: [io 0x1080-0x10ff] has been reserved
system 00:01: [io 0x1400-0x147f] has been reserved
system 00:01: [io 0x1480-0x14ff] has been reserved
system 00:01: [io 0x1800-0x187f] has been reserved
system 00:01: [io 0x1880-0x18ff] has been reserved
system 00:01: [io 0x2000-0x207f] has been reserved
system 00:01: [io 0x2080-0x20ff] has been reserved
system 00:01: [mem 0xfec80000-0xfecbffff] has been reserved
system 00:01: [mem 0xfefe0000-0xfefe01ff] has been reserved
system 00:01: [mem 0xfefe1000-0xfefe10ff] has been reserved
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x0800-0x087f] has been reserved
system 00:02: [io 0x0290-0x0297] has been reserved
system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:09: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:09: [mem 0xfeff0000-0xfeff00ff] has been reserved
system 00:09: [mem 0xbfee0000-0xbfefffff] could not be reserved
system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x00100000-0xbfedffff] could not be reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:09: [mem 0xfefff000-0xfeffffff] has been reserved
system 00:09: [mem 0xfff80000-0xfff80fff] has been reserved
system 00:09: [mem 0xfff90000-0xfffbffff] has been reserved
system 00:09: [mem 0xfffed000-0xfffeffff] has been reserved
pci 0000:00:04.0: PCI bridge to [bus 01-01]
pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:09.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:0b.0: PCI bridge to [bus 03-03]
pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:00:0c.0: PCI bridge to [bus 04-04]
pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:01: resource 2 [mem 0xfdd00000-0xfddfffff pref]
pci_bus 0000:01: resource 3 [io 0x0000-0xffff]
pci_bus 0000:01: resource 4 [mem 0x00000000-0xffffffff]
pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 1857k freed
highmem bounce pool size: 64 pages
NTFS driver 2.1.29 [Flags: R/W].
msgmni has been set to 1716
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
pcieport 0000:00:09.0: setting latency timer to 64
pcieport 0000:00:09.0: irq 24 for MSI/MSI-X
pcieport 0000:00:0b.0: setting latency timer to 64
pcieport 0000:00:0b.0: irq 25 for MSI/MSI-X
pcieport 0000:00:0c.0: setting latency timer to 64
pcieport 0000:00:0c.0: irq 26 for MSI/MSI-X
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12b
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
sata_nv 0000:00:08.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:08.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
sata_nv 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:08.1: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 23
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 23
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi4 : pata_amd
scsi5 : pata_amd
ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Clocksource tsc unstable (delta = 176845187 ns)
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD3200AAJS-65B4A0, 01.03A01, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAJS-6 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: HL-DT-ST DVD-RAM GH15L, FD5D, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH15L FD5D PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ata4: SATA link down (SStatus 0 SControl 300)
ata6: port disabled. ignoring.
Freeing unused kernel memory: 328k freed
floppy0: no floppy controllers found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
aufs 2-standalone.tree-33-20100329
fuse init (API version 7.13)
usb 1-9: new high speed USB device using ehci_hcd and address 4
scsi6 : usb-storage 1-9:1.0
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb 2-3: new low speed USB device using ohci_hcd and address 2
usb 2-3: device descriptor read/all, error -62
usb 2-3: new low speed USB device using ohci_hcd and address 3
usb 2-3: device descriptor read/64, error -62
usb 2-3: device descriptor read/64, error -62
usb 2-3: new low speed USB device using ohci_hcd and address 4
usb 2-3: device not accepting address 4, error -62
usb 2-3: new low speed USB device using ohci_hcd and address 5
usb 2-3: device not accepting address 5, error -62
hub 2-0:1.0: unable to enumerate USB device on port 3
usb 2-4: new low speed USB device using ohci_hcd and address 6
input: USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input0
generic-usb 0003:15D9:0A33.0001: input: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:02.0-4/input0
scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
scsi 6:0:0:2: Direct-Access Generic USB xD/SM Reader 1.02 PQ: 0 ANSI: 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:1: [sdc] Attached SCSI removable disk
scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 6:0:0:2: [sdd] Attached SCSI removable disk
sd 6:0:0:3: [sde] Attached SCSI removable disk
usb-storage: device scan complete
kjournald starting. Commit interval 5 seconds
EXT3-fs (loop1): using internal journal
EXT3-fs (loop1): mounted filesystem with ordered data mode
aufs test_add:248:mount[1019]: uid/gid/perm /pup_ro2 0/0/0777, 0/0/0755
udev: starting version 151
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20091214/nspredef-1040)
ACPI: Expecting a [Reference] package element, found type 0
ACPI: Invalid passive threshold
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
ACPI: Fan [FAN] (on)
i2c i2c-0: nForce2 SMBus adapter at 0x1c00
i2c i2c-1: nForce2 SMBus adapter at 0xf400
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20
forcedeth 0000:00:07.0: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:1: Attached scsi generic sg3 type 0
sd 6:0:0:2: Attached scsi generic sg4 type 0
sd 6:0:0:3: Attached scsi generic sg5 type 0
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ohci1394 0000:01:09.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
ohci1394 0000:01:09.0: setting latency timer to 64
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
input: PC Speaker as /devices/platform/pcspkr/input/input3
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:21:97:26:77:11
forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:00:05.0: setting latency timer to 64
hda_codec: ALC1200: BIOS auto-probing.
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00000ae6ffdd71e9]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
forcedeth 0000:00:07.0: irq 27 for MSI/MSI-X
usb 2-3: new low speed USB device using ohci_hcd and address 7
input: Compaq Compaq Internet Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input4
generic-usb 0003:049F:000E.0002: input: USB HID v1.00 Keyboard [Compaq Compaq Internet Keyboard] on usb-0000:00:02.0-3/input0
input: Compaq Compaq Internet Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input5
generic-usb 0003:049F:000E.0003: input,hiddev96: USB HID v1.00 Device [Compaq Compaq Internet Keyboard] on usb-0000:00:02.0-3/input1
usb 2-4: USB disconnect, address 6
usb 2-4: new low speed USB device using ohci_hcd and address 8
input: USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input6
generic-usb 0003:15D9:0A33.0004: input: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:02.0-4/input0
usb 2-3: USB disconnect, address 7
usb 2-3: new low speed USB device using ohci_hcd and address 9
usb 2-3: device descriptor read/all, error -62
usb 2-3: new low speed USB device using ohci_hcd and address 10
input: Compaq Compaq Internet Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input7
generic-usb 0003:049F:000E.0005: input: USB HID v1.00 Keyboard [Compaq Compaq Internet Keyboard] on usb-0000:00:02.0-3/input0
input: Compaq Compaq Internet Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input8
generic-usb 0003:049F:000E.0006: input,hiddev96: USB HID v1.00 Device [Compaq Compaq Internet Keyboard] on usb-0000:00:02.0-3/input1
usb 2-4: USB disconnect, address 8
usb 2-4: new low speed USB device using ohci_hcd and address 11
input: USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input9
generic-usb 0003:15D9:0A33.0007: input: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:02.0-4/input0
sh-4.1#

_________________
I use Google Search on Puppy Forum
not an ideal solution though
Back to top
View user's profile Send private message 
ardvark


Joined: 01 Jul 2013
Posts: 950
Location: USA

PostPosted: Fri 28 Mar 2014, 14:22    Post subject:  

Hi...

Thank you for supplying the dmesg information, however, from what I saw, I couldn't see any network information, or at least any errors associated with it. Is this from the computer that works? If so, then this isn't going to help. I would need you to get these outputs from the systems that don't work. Wink

To be able to help you further, I really need the output of...

Code:
lspci -nn


Code:
lsmod


from the computers that don't work.

Also, which manager were you trying to connect with? Frisbee?

Thanks...
Back to top
View user's profile Send private message 
nooby

Joined: 29 Jun 2008
Posts: 10557
Location: SwedenEurope

PostPosted: Fri 28 Mar 2014, 17:54    Post subject:  

Ooops sorry, I am so sorry.
Not sure why failed to realize such obvious mistakes on my part.

But as I told many of you. I feel too sad to do such a thing just now.
You are 100% correct. That is the ay to find out.

Okay sooner or later I manage to work up
my self worth high enough so I can make that set up
to take both or one of the computers down from the shelf
and to test them.

Just now I feel too sad to do such things. If it fails again it will take weeks to recover from the blow.

_________________
I use Google Search on Puppy Forum
not an ideal solution though
Back to top
View user's profile Send private message 
ardvark


Joined: 01 Jul 2013
Posts: 950
Location: USA

PostPosted: Fri 28 Mar 2014, 18:19    Post subject:  

Hi...

Can I share something with you? Any inability to understand how to work on a computer has nothing to do with your worth and value as a human being. To begin with, we are all created with different skills and abilities. As an example, not everyone can understand quantum physics or work with tools that are a part of that field. I can't and honestly, I think it would bore me. Anything math related does. Wink

God has given you certain gifts and abilities and just because you don't happen to be good at one particular thing or another doesn't make you less of a human being. Smile

Regards...
Back to top
View user's profile Send private message 
nooby

Joined: 29 Jun 2008
Posts: 10557
Location: SwedenEurope

PostPosted: Fri 28 Mar 2014, 22:21    Post subject:  

If there is a God which I doubt very much he had forgotten
to give me talent for any skill. Maybe I am good at
making complain but that is not a needed thing,

While we have God as one of many topics. Due to me derailing
my own threads I have decided to start a new forum thread
for my views on God.
So I try to link to that thread now and then when I note I derail again.
Link to the new thread.

http://www.murga-linux.com/puppy/viewtopic.php?p=767721#767721

_________________
I use Google Search on Puppy Forum
not an ideal solution though
Back to top
View user's profile Send private message 
tempestuous

Joined: 10 Jun 2005
Posts: 5246
Location: Australia

PostPosted: Sun 30 Mar 2014, 01:51    Post subject:  

nooby wrote:
I am using puppy Lupu
...
Those two that fail are Acer both of them. D250 and D255.

You need to realise that Puppy Lucid and its 2.6.33.2 kernel are quite old, and lack support for a significant range of modern hardware.
But I posted updated drivers for Lucid 5.1/5.2.x here -
http://www.murga-linux.com/puppy/viewtopic.php?t=59000

and the driver you need is atl1e from the second page of that forum thread -
http://www.murga-linux.com/puppy/viewtopic.php?p=467845#467845

This driver will certainly support the ethernet interface of your D250, and probably also the D255.
Back to top
View user's profile Send private message 
nooby

Joined: 29 Jun 2008
Posts: 10557
Location: SwedenEurope

PostPosted: Mon 31 Mar 2014, 00:53    Post subject:  

Thanks,
but I feel rather confident that the driver on Acer D250
did work just a few weeks ago but I do have an old memory,
I should take a new look at it then thanks for telling me about this driver

_________________
I use Google Search on Puppy Forum
not an ideal solution though
Back to top
View user's profile Send private message 
tempestuous

Joined: 10 Jun 2005
Posts: 5246
Location: Australia

PostPosted: Mon 31 Mar 2014, 04:25    Post subject:  

Don't overthink it.
Install the atl1e driver dotpet.
Reboot.
Run the (full) Network Wizard, selecting Auto DHCP. Hopefully you will get a successful connection straight away.

Total time invested: 1 or 2 minutes.
Back to top
View user's profile Send private message 
nooby

Joined: 29 Jun 2008
Posts: 10557
Location: SwedenEurope

PostPosted: Mon 31 Mar 2014, 16:38    Post subject:  

Finally solved thanks too all of you.

ardvark much appreciated that you
sent me encouraging words and thoughts
and tempestuous much appreciated that
you gave us all is driver .pet


ardvark wrote:
nooby wrote:
I failed to follow your instruction or you assumed me
familiar with what to do anyway it says such command
does not exist?
demsq: command not found


Hi...

Cut and paste from the code I included above. You misspelled the command. It's "dmesg" Wink


No need for that now when it works

_________________
I use Google Search on Puppy Forum
not an ideal solution though
Back to top
View user's profile Send private message 
ardvark


Joined: 01 Jul 2013
Posts: 950
Location: USA

PostPosted: Mon 31 Mar 2014, 20:16    Post subject:  

Hi...

You're welcome, glad to help. Smile

Regards...
Back to top
View user's profile Send private message 
Display posts from previous:   Sort by:   
Page 2 of 2 [27 Posts]   Goto page: Previous 1, 2
Post new topic   Reply to topic View previous topic :: View next topic
 Forum index » House Training » Beginners Help ( Start Here)
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.1757s ][ Queries: 11 (0.0048s) ][ GZIP on ]