FatdogArm Beta1/2/3/4- 16 April 2016

A home for all kinds of Puppy related projects
Post Reply
Message
Author
IhaveU3
Posts: 12
Joined: Sat 08 Mar 2014, 02:17
Location: Sydney

#16 Post by IhaveU3 »

Hi James, sorry to hear you have been unwell, hope you recover soon.
Thanks for your reply.
The wireless dongle is type RTL8191SU I think, the outputs as requested are:
dmesg:
[ 0.000000] Booting Linux on physical CPU 0xa00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.8.13.13 (root@james-pc) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #12 SMP PREEMPT Tue Feb 25 15:36:59 WIT 2014 ()
[ 0.000000] Kernel was built at commit id ''
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: ODROIDU2
[ 0.000000] cma: CMA: reserved 64 MiB at 43000000
[ 0.000000] cma: CMA: reserved 64 MiB at 51000000
[ 0.000000] cma: CMA: reserved 128 MiB at 67800000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] CPU EXYNOS4412 (id 0xe4412220)
[ 0.000000] exynos4_init_clocks: initializing clocks
[ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[ 0.000000] s3c_register_clksrc: clock armclk has no registers set
[ 0.000000] s3c_register_clksrc: clock audiocdclk has no registers set
[ 0.000000] audiocdclk: no parent clock specified
[ 0.000000] exynos4_setup_clocks: registering clocks
[ 0.000000] exynos4_setup_clocks: xtal is 24000000
[ 0.000000] EXYNOS4: PLL settings, A=1000000000, M=880000000, E=96000000 V=350000000
[ 0.000000] EXYNOS4: ARMCLK=1000000000, DMC=440000000, ACLK200=176000000
ACLK100=110000000, ACLK160=176000000, ACLK133=146666666
[ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimd: source is mout_mpll_user (6), rate is 55000000
[ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 55000000
[ 0.000000] sclk_g3d: source is mout_g3d0 (0), rate is 55000000
[ 0.000000] On node 0 totalpages: 524032
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 193040 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2574 pages used for memmap
[ 0.000000] HighMem zone: 326898 pages, LIFO batch:31
[ 0.000000] Running under secure firmware.
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c1826000 s7936 r8192 d12544 u32768
[ 0.000000] pcpu-alloc: s7936 r8192 d12544 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519938
[ 0.000000] Kernel command line: console=ttySAC1,115200n8 mem=2047M fbcon=map:1 console=tty1 video=HDMI-A-1:1280x720 devwait=3 loglevel=3 basesfs=local
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Memory: 2047MB = 2047MB total
[ 0.000000] Memory: 1794412k/1794412k available, 301716k reserved, 1317888K highmem
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc062d7d0 (6294 kB)
.init : 0xc062e000 - 0xc0659f00 ( 176 kB)
.data : 0xc065a000 - 0xc06c88e0 ( 443 kB)
.bss : 0xc06c88e0 - 0xc0810250 (1311 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:549
[ 0.000000] MCT clocksource init timer with clk_rate=24000000 hz
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.000337] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
[ 0.045053] pid_max: default: 32768 minimum: 301
[ 0.045313] Mount-cache hash table entries: 512
[ 0.046289] Initializing cgroup subsys cpuacct
[ 0.046307] Initializing cgroup subsys devices
[ 0.046354] CPU: Testing write buffer coherency: ok
[ 0.046650] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
[ 0.046752] Setting up static identity map for 0x40489510 - 0x40489568
[ 0.046808] L310 cache controller enabled
[ 0.046822] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
[ 0.096983] CPU1: Booted secondary processor
[ 0.116685] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
[ 0.126971] CPU2: Booted secondary processor
[ 0.146685] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
[ 0.156986] CPU3: Booted secondary processor
[ 0.176686] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
[ 0.176717] Brought up 4 CPUs
[ 0.176740] SMP: Total of 4 processors activated (7969.17 BogoMIPS).
[ 0.177546] devtmpfs: initialized
[ 0.183875] regulator-dummy: no parameters
[ 0.191223] NET: Registered protocol family 16
[ 0.198465] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.203505] s5p_hdmi_cec_set_platdata()
[ 0.207634] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.207644] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.207730] S3C Power Management, Copyright 2004 Simtec Electronics
[ 0.207800] EXYNOS4x12 PMU Initialize
[ 0.209693] EXYNOS: Initializing architecture
[ 0.210442] s3c24xx-pwm s3c24xx-pwm.0: tin at 110000000, tdiv at 110000000, tin=divclk, base 0
[ 0.210501] s3c24xx-pwm s3c24xx-pwm.1: tin at 110000000, tdiv at 110000000, tin=divclk, base 8
[ 0.225528] bio: create slab <bio-0> at 0
[ 0.226071] hdmi_5v: 5000 mV
[ 0.227523] SCSI subsystem initialized
[ 0.228181] usbcore: registered new interface driver usbfs
[ 0.228287] usbcore: registered new interface driver hub
[ 0.228417] usbcore: registered new device driver usb
[ 0.228739] s3c-i2c s3c2440-i2c.0: slave address 0x10
[ 0.228753] s3c-i2c s3c2440-i2c.0: bus frequency set to 71 KHz
[ 0.231700] max77686 0-0009: device found
[ 0.231854] max77686 0-0009: irq is not specified
[ 0.256696] LDO1 VDD_ALIVE: 1000 mV
[ 0.286694] LDO2 VDDQ_M1_1V8: 1200 mV
[ 0.316695] LDO3 VDDQ_AUD_1V8: 1800 mV
[ 0.346696] LDO4 VDDQ_MMC2_2V8: 2800 mV
[ 0.376696] LDO5 VDDQ_MMC1_1V8: 1800 mV
[ 0.406696] LDO6 VDD10_MPLL_1V0: 1000 mV
[ 0.436697] LDO7 VDD10_EPLL_1V0: 1000 mV
[ 0.466698] LDO8 VDD10_MIPI_1V0: 1000 mV
[ 0.491696] LDO9 VT_CORE_1V0: ODROIDU2: Disabled regulator
[ 0.491706] LDO9 VT_CORE_1V0: 1000 mV
[ 0.506699] LDO10 VDD18_MIPI_1V8: 1800 mV
[ 0.536699] LDO11 VDD18_ABB1_1V8: 1800 mV
[ 0.551699] vdd_ldo12 range: 3300 mV
[ 0.581700] LDO13 VDD18_MIPIHSI_1V8: 1800 mV
[ 0.611700] LDO14 VDD18_ADC_1V8: 1800 mV
[ 0.626700] vdd_ldo15 range: 1000 mV
[ 0.656701] LDO16 VDD18_HSIC: 1800 mV
[ 0.686700] LDO17 VDDQ_CAM_1V8: 1800 mV
[ 0.711700] LDO18 VDDQ_ISP_1V8: ODROIDU2: Disabled regulator
[ 0.711709] LDO18 VDDQ_ISP_1V8: 1800 mV
[ 0.721701] LDO19 VT_CAM_1V8: ODROIDU2: Disabled regulator
[ 0.721710] LDO19 VT_CAM_1V8: 1800 mV
[ 0.741703] vddq_emmc_1V8: 1800 <--> 3000 mV at 1800 mV
[ 0.771703] LDO21 TFLASH_2V8: 2800 mV
[ 0.801703] vddf_emmc_2V85: 2850 mV
[ 0.826701] LDO23 VDD_TOUCH_2V8: ODROIDU2: Disabled regulator
[ 0.826711] LDO23 VDD_TOUCH_2V8: 2800 mV
[ 0.851702] LDO24 VDD_TOUCHLED_3V3: ODROIDU2: Disabled regulator
[ 0.851712] LDO24 VDD_TOUCHLED_3V3: 3300 mV
[ 0.881705] LDO25 VDDQ_LCD_3V0: 1800 mV
[ 0.906703] LDO26 VDD_MOTOR_3V0: ODROIDU2: Disabled regulator
[ 0.906713] LDO26 VDD_MOTOR_3V0: 3000 mV
[ 0.916706] BUCK1 vdd_mif: 1100 mV
[ 0.931706] BUCK2 vdd_arm: 800 <--> 1500 mV at 1400 mV
[ 0.941708] BUCK3 vdd_int: 1125 mV
[ 0.956706] BUCK4 vdd_g3d: 850 <--> 1200 mV at 1125 mV
[ 0.986706] BUCK5 VDDQ_CKEM1_2: 1200 mV
[ 1.016707] BUCK6 1V35: 1350 mV
[ 1.046711] BUCK7 2V0: 2000 mV
[ 1.061706] ODROIDU2: Regulator BUCK8
[ 1.211709] BUCK8 3V0: 3300 mV
[ 1.236708] BUCK9 1V2: ODROIDU2: Disabled regulator
[ 1.236718] BUCK9 1V2: 1200 mV
[ 1.242013] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[ 1.242077] s3c-i2c s3c2440-i2c.1: slave address 0x10
[ 1.242090] s3c-i2c s3c2440-i2c.1: bus frequency set to 71 KHz
[ 1.242361] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[ 1.242416] s3c-i2c s3c2440-i2c.2: slave address 0x10
[ 1.242429] s3c-i2c s3c2440-i2c.2: bus frequency set to 71 KHz
[ 1.242703] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
[ 1.242754] s3c-i2c s3c2440-i2c.3: slave address 0x10
[ 1.242767] s3c-i2c s3c2440-i2c.3: bus frequency set to 71 KHz
[ 1.242910] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
[ 1.242966] s3c-i2c s3c2440-i2c.7: slave address 0x10
[ 1.242979] s3c-i2c s3c2440-i2c.7: bus frequency set to 71 KHz
[ 1.243124] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
[ 1.243180] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
[ 1.243192] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 71 KHz
[ 1.243456] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
[ 1.243563] media: Linux media interface: v0.10
[ 1.243666] Linux video capture interface: v2.00
[ 1.244404] Advanced Linux Sound Architecture Driver Initialized.
[ 1.245323] cfg80211: Calling CRDA to update world regulatory domain
[ 1.245926] Switching to clocksource mct-frc
[ 1.257787] NET: Registered protocol family 2
[ 1.258252] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.258372] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
[ 1.258507] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.258563] TCP: reno registered
[ 1.258577] UDP hash table entries: 512 (order: 2, 24576 bytes)
[ 1.258611] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[ 1.258832] NET: Registered protocol family 1
[ 1.258983] Unpacking initramfs...
[ 1.310868] Freeing initrd memory: 13360K
[ 1.311093] CPU PMU: probing PMU on CPU 2
[ 1.311112] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 1.312978] bounce pool size: 64 pages
[ 1.322055] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.323170] aufs 3.8-20131104
[ 1.323188] msgmni has been set to 1468
[ 1.323978] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.323987] io scheduler noop registered
[ 1.323994] io scheduler deadline registered
[ 1.324183] io scheduler cfq registered (default)
[ 1.329521] s3c-fb exynos4-fb.0: start latency exceeded, new value 625 ns
[ 1.329564] s3c-fb exynos4-fb.0: state restore latency exceeded, new value 31708 ns
[ 1.339104] s3c-fb exynos4-fb.0: window 0: fb
[ 1.343670] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
[ 1.343682] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 1.347942] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
[ 1.347954] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 1.349250] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
[ 1.349262] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[ 1.422903] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.424128] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10
[ 1.424405] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10
[ 1.428689] console [ttySAC1] enabled
[ 1.428966] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10
[ 1.429229] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10
[ 1.429795] [drm] Initialized drm 1.1.0 20060810
[ 1.430129] i2c i2c-2: attached s5p_ddc into i2c adapter successfully
[ 1.430256] i2c i2c-8: attached s5p_hdmiphy into i2c adapter successfully
[ 1.430637] exynos-mixer s5p-mixer: probe start
[ 1.431232] s5p-g2d s5p-g2d.0: The exynos g2d(ver 4.1) successfully probed
[ 1.432150] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.432158] [drm] No driver support for vblank timestamp query.
[ 1.475157] exynos-mixer s5p-mixer: start latency exceeded, new value 625 ns
[ 1.475200] exynos-mixer s5p-mixer: state restore latency exceeded, new value 36416 ns
[ 1.475214] exynos-hdmi exynos4-hdmi: start latency exceeded, new value 375 ns
[ 1.476462] exynos-hdmi exynos4-hdmi: state restore latency exceeded, new value 1240792 ns
[ 1.552189] Console: switching to colour frame buffer device 160x45
[ 1.560572] exynos-drm exynos-drm: fb1: frame buffer device
[ 1.560581] exynos-drm exynos-drm: registered panic notifier
[ 1.560594] [drm] Initialized exynos 1.0.0 20110530 on minor 0
[ 1.560668] mali-utgard mali-utgard.0: start latency exceeded, new value 459 ns
[ 1.560680] mali-utgard mali-utgard.0: state restore latency exceeded, new value 2584 ns
[ 1.562557] Mali: init_mali_clock mali_clock c0681ae8
[ 1.566710] mali-utgard mali-utgard.0: stop latency exceeded, new value 708 ns
[ 1.566727] mali-utgard mali-utgard.0: state save latency exceeded, new value 3166 ns
[ 1.567076] Mali: Mali device driver loaded
[ 1.567327] UMP: UMP device driver (null) loaded
[ 1.567338] Inserting UMP lock device driver. Compiled: Feb 25 2014, time: 14:59:01
[ 1.567560] UMP lock device driver loaded
[ 1.571544] loop: module loaded
[ 1.572856] nbd: registered device at major 43
[ 1.579716] usbcore: registered new interface driver rtl8192cu
[ 1.579827] usbcore: registered new interface driver smsc95xx
[ 1.579922] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.580133] s5p-ehci s5p-ehci: S5P EHCI Host Controller
[ 1.580159] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[ 1.580549] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
[ 1.585983] s5p-ehci s5p-ehci: USB 2.0 started, EHCI 1.00
[ 1.586047] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.586058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.586067] usb usb1: Product: S5P EHCI Host Controller
[ 1.586075] usb usb1: Manufacturer: Linux 3.8.13.13 ehci_hcd
[ 1.586083] usb usb1: SerialNumber: s5p-ehci
[ 1.586602] hub 1-0:1.0: USB hub found
[ 1.586624] hub 1-0:1.0: 3 ports detected
[ 1.587028] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.587113] exynos-ohci exynos-ohci: Already power on PHY
[ 1.587124] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
[ 1.587147] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
[ 1.587180] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
[ 1.645027] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.645038] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.645047] usb usb2: Product: EXYNOS OHCI Host Controller
[ 1.645055] usb usb2: Manufacturer: Linux 3.8.13.13 ohci_hcd
[ 1.645062] usb usb2: SerialNumber: exynos-ohci
[ 1.645538] hub 2-0:1.0: USB hub found
[ 1.645555] hub 2-0:1.0: 3 ports detected
[ 1.645939] Initializing USB Mass Storage driver...
[ 1.646105] usbcore: registered new interface driver usb-storage
[ 1.646112] USB Mass Storage support registered.
[ 1.751186] usb3503 0-0008: SP_ILOCK failed (-6)
[ 1.751196] usb3503 0-0008: usb3503_probe: probed on hub mode
[ 1.751640] mousedev: PS/2 mouse device common for all mice
[ 1.752249] s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
[ 1.753824] s5p-fimc exynos4-fimc.0: sclk_fimc rate is 176000000
[ 1.753859] s5p-fimc exynos4-fimc.0: start latency exceeded, new value 625 ns
[ 1.753886] s5p-fimc exynos4-fimc.0: state restore latency exceeded, new value 16042 ns
[ 1.753914] s5p-fimc exynos4-fimc.0: stop latency exceeded, new value 458 ns
[ 1.753932] s5p-fimc exynos4-fimc.0: state save latency exceeded, new value 3000 ns
[ 1.754006] s5p-fimc exynos4-fimc.1: sclk_fimc rate is 176000000
[ 1.754652] s5p-fimc exynos4-fimc.1: start latency exceeded, new value 458 ns
[ 1.754678] s5p-fimc exynos4-fimc.1: state restore latency exceeded, new value 14833 ns
[ 1.754703] s5p-fimc exynos4-fimc.1: stop latency exceeded, new value 500 ns
[ 1.754718] s5p-fimc exynos4-fimc.1: state save latency exceeded, new value 2208 ns
[ 1.754792] s5p-fimc exynos4-fimc.2: sclk_fimc rate is 176000000
[ 1.755434] s5p-fimc exynos4-fimc.2: start latency exceeded, new value 458 ns
[ 1.755460] s5p-fimc exynos4-fimc.2: state restore latency exceeded, new value 14791 ns
[ 1.755485] s5p-fimc exynos4-fimc.2: stop latency exceeded, new value 459 ns
[ 1.755501] s5p-fimc exynos4-fimc.2: state save latency exceeded, new value 2250 ns
[ 1.755575] s5p-fimc exynos4-fimc.3: sclk_fimc rate is 176000000
[ 1.756219] s5p-fimc exynos4-fimc.3: start latency exceeded, new value 416 ns
[ 1.756245] s5p-fimc exynos4-fimc.3: state restore latency exceeded, new value 14834 ns
[ 1.756270] s5p-fimc exynos4-fimc.3: stop latency exceeded, new value 458 ns
[ 1.756285] s5p-fimc exynos4-fimc.3: state save latency exceeded, new value 2250 ns
[ 1.756844] s5p-fimc-md: Registered fimc.0.m2m as /dev/video0
[ 1.757012] s5p-fimc-md: Registered fimc.0.capture as /dev/video1
[ 1.757176] s5p-fimc-md: Registered fimc.1.m2m as /dev/video2
[ 1.757342] s5p-fimc-md: Registered fimc.1.capture as /dev/video3
[ 1.757503] s5p-fimc-md: Registered fimc.2.m2m as /dev/video4
[ 1.757675] s5p-fimc-md: Registered fimc.2.capture as /dev/video5
[ 1.757836] s5p-fimc-md: Registered fimc.3.m2m as /dev/video6
[ 1.757995] s5p-fimc-md: Registered fimc.3.capture as /dev/video7
[ 1.758785] sclk_mfc rate is: 220
[ 1.759013] s5p-mfc s5p-mfc: decoder registered as /dev/video8
[ 1.759175] s5p-mfc s5p-mfc: encoder registered as /dev/video9
[ 1.759735] Exynos: Kernel Thermal management registered
[ 1.759984] cpuidle: using governor ladder
[ 1.760078] sdhci: Secure Digital Host Controller Interface driver
[ 1.760085] sdhci: Copyright(c) Pierre Ossman
[ 1.760184] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (440000000 Hz)
[ 1.760256] mmc0: no vqmmc regulator found
[ 1.760269] mmc0: no vmmc regulator found
[ 1.785986] mmc0: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA
[ 1.786399] dw_mmc dw_mmc: Using internal DMA controller.
[ 1.816025] dw_mmc dw_mmc: Version ID is 240a
[ 1.816037] dw_mmc dw_mmc: DW MMC controller at irq 109, 32 bit host data width, 128 deep fifo
[ 1.817175] usbcore: registered new interface driver usbhid
[ 1.817182] usbhid: USB HID core driver
[ 1.828356] mmc0: new high speed SDHC card at address aaaa
[ 1.828652] mmcblk0: mmc0:aaaa SU08G 7.40 GiB
[ 1.829887] mmcblk0: p1 p2
[ 1.830527] DWMMC: Div 2 = 130
[ 1.830637] mmc_host mmc1: Bus speed (slot 0) = 104000000Hz (slot req 400000Hz, actual 400000HZ div = 130)
[ 1.841591] max98090 1-0010: MAX98090 REVID=0x43
[ 1.848975] hkdk-snd-max98090 hkdk-snd-max98090: HiFi <-> samsung-i2s.0 mapping ok
[ 1.851159] hkdk-snd-max98090 hkdk-snd-max98090: HiFi <-> samsung-i2s.0 mapping ok
[ 1.852850] TCP: cubic registered
[ 1.852861] NET: Registered protocol family 17
[ 1.852898] NET: Registered protocol family 15
[ 1.852919] NET: Registered protocol family 35
[ 1.853254] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 1.853317] ThumbEE CPU extension supported.
[ 1.853337] Registering SWP/SWPB emulation handler
[ 1.858490] DRM: mali_platform_drm_probe()
[ 1.858500] mali_drm_init(), driver name: mali_drm, version 0.1
[ 1.858792] DRM: mali_driver_load()
[ 1.858823] [drm] Initialized mali_drm 0.1.0 20100520 on minor 1
[ 1.859021] s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-01 03:35:57 UTC (946697757)
[ 1.862344] exynos4_dvfs_hotplug_init, max(2000000),min(0)
[ 1.862407] ALSA device list:
[ 1.862412] #0: Built-in Audio
[ 1.862575] Freeing init memory: 172K
[ 1.870989] DWMMC: Div 1 = 174
[ 1.871084] mmc_host mmc1: Bus speed (slot 0) = 104000000Hz (slot req 300000Hz, actual 298850HZ div = 174)
[ 1.896029] usb 1-2: new high-speed USB device number 2 using s5p-ehci
[ 1.916010] DWMMC: Div 1 = 255
[ 1.916095] mmc_host mmc1: Bus speed (slot 0) = 104000000Hz (slot req 203922Hz, actual 203921HZ div = 255)
[ 2.026332] usb 1-2: New USB device found, idVendor=0424, idProduct=9730
[ 2.026340] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.028806] smsc95xx v1.0.4
[ 2.080263] smsc95xx 1-2:1.0 eth0: register 'smsc95xx' at usb-s5p-ehci-2, smsc95xx USB 2.0 Ethernet, d2:73:44:13:ce:27
[ 2.177682] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[ 2.178244] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[ 2.184745] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.305984] usb 1-3: new high-speed USB device number 3 using s5p-ehci
[ 2.433395] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[ 2.433944] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[ 2.436453] usb 1-3: New USB device found, idVendor=0424, idProduct=3503
[ 2.436460] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.436956] hub 1-3:1.0: USB hub found
[ 2.437075] hub 1-3:1.0: 3 ports detected
[ 2.439450] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.467600] EXT4-fs (loop2): couldn't mount as ext3 due to feature incompatibilities
[ 2.467838] EXT4-fs (loop2): couldn't mount as ext2 due to feature incompatibilities
[ 2.488796] EXT4-fs (loop2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.537978] aufs test_add:294:exe[1499]: uid/gid/perm /aufs/pup_ro 0/0/0755, 0/500/0775
[ 2.537992] aufs test_add:294:exe[1499]: uid/gid/perm /aufs/kernel-modules 0/0/0755, 0/500/0775
[ 2.538000] aufs test_add:294:exe[1499]: uid/gid/perm /aufs/pup_init 0/0/01777, 0/500/0775
[ 2.721888] usb 1-3.2: new full-speed USB device number 4 using s5p-ehci
[ 2.829080] usb 1-3.2: New USB device found, idVendor=046d, idProduct=c52e
[ 2.829089] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.829094] usb 1-3.2: Product: USB Receiver
[ 2.829099] usb 1-3.2: Manufacturer: Logitech
[ 2.831691] input: Logitech USB Receiver as /devices/platform/s5p-ehci/usb1/1-3/1-3.2/1-3.2:1.0/input/input0
[ 2.831992] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-s5p-ehci-3.2/input0
[ 2.834990] input: Logitech USB Receiver as /devices/platform/s5p-ehci/usb1/1-3/1-3.2/1-3.2:1.1/input/input1
[ 2.835462] hid-generic 0003:046D:C52E.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-s5p-ehci-3.2/input1
[ 3.138036] systemd-udevd[1548]: starting version 206
[ 3.194864] udevd[1548]: specified group 'dialout' unknown
[ 3.200812] udevd[1548]: specified group 'cdrom' unknown
[ 3.266334] input: gpio-keys as /devices/platform/gpio-keys.0/input/input2
[ 3.299354] udevd[1567]: failed to execute '/etc/rc.d/init.d/setclock' '/etc/rc.d/init.d/setclock start': No such file or directory
[ 3.311123] s5p-fimc exynos4-fimc.0: state restore latency exceeded, new value 18709 ns
[ 3.311162] s5p-fimc exynos4-fimc.0: state save latency exceeded, new value 3542 ns
[ 3.316676] s5p-fimc exynos4-fimc.1: state restore latency exceeded, new value 19000 ns
[ 3.316710] s5p-fimc exynos4-fimc.1: stop latency exceeded, new value 792 ns
[ 3.316729] s5p-fimc exynos4-fimc.1: state save latency exceeded, new value 3833 ns
[ 3.318284] s5p-fimc exynos4-fimc.2: start latency exceeded, new value 500 ns
[ 3.318318] s5p-fimc exynos4-fimc.2: state restore latency exceeded, new value 19709 ns
[ 3.318353] s5p-fimc exynos4-fimc.2: state save latency exceeded, new value 4166 ns
[ 3.323597] s5p-fimc exynos4-fimc.3: start latency exceeded, new value 500 ns
[ 3.323629] s5p-fimc exynos4-fimc.3: state restore latency exceeded, new value 17583 ns
[ 3.323652] s5p-fimc exynos4-fimc.3: stop latency exceeded, new value 792 ns
[ 3.323665] s5p-fimc exynos4-fimc.3: start latency exceeded, new value 625 ns
[ 3.323679] s5p-fimc exynos4-fimc.3: state save latency exceeded, new value 3833 ns
[ 3.331120] s5p-mfc s5p-mfc: start latency exceeded, new value 541 ns
[ 3.331294] s5p-mfc s5p-mfc: state restore latency exceeded, new value 2041 ns
[ 4.037038] s5p_mfc_alloc_and_load_firmware:44: Firmware is not present in the /lib/firmware directory nor compiled in kernel
[ 4.037060] s5p-mfc s5p-mfc: stop latency exceeded, new value 1042 ns
[ 4.037071] s5p-mfc s5p-mfc: state save latency exceeded, new value 1667 ns
[ 4.037374] udevd[1551]: error: can not open '/sys/devices/platform/s5p-mfc/firmware/s5p-mfc.fw/loading'
[ 4.038043] s5p-mfc s5p-mfc: start latency exceeded, new value 584 ns
[ 4.043202] s5p_mfc_alloc_and_load_firmware:44: Firmware is not present in the /lib/firmware directory nor compiled in kernel
[ 4.043230] s5p-mfc s5p-mfc: state save latency exceeded, new value 2000 ns
[ 4.043352] udevd[1550]: error: can not open '/sys/devices/platform/s5p-mfc/firmware/s5p-mfc.fw/loading'
[ 4.650713] NET: Registered protocol family 10
[ 4.651251] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.813074] exynos-mixer s5p-mixer: stop latency exceeded, new value 834 ns
[ 4.813085] exynos-hdmi exynos4-hdmi: stop latency exceeded, new value 458 ns
[ 4.860978] exynos-mixer s5p-mixer: state save latency exceeded, new value 47886625 ns
[ 4.886483] exynos-hdmi exynos4-hdmi: state save latency exceeded, new value 25491708 ns
[ 4.886488] exynos-hdmi exynos4-hdmi: stop latency exceeded, new value 541 ns
[ 4.903802] exynos_drm: unknown ioctl command: 40187a21
[ 5.553505] exynos-hdmi exynos4-hdmi: state restore latency exceeded, new value 1620208 ns
[ 6.083707] smsc95xx 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 6.088283] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
lsusb:
Bus 001 Device 002: ID 0424:9730
Bus 001 Device 003: ID 0424:3503
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0001
Bus 001 Device 005: ID 0bda:8176
Bus 001 Device 004: ID 046d:c52e
Thanks again James :)
Fred

User avatar
DC
Posts: 360
Joined: Sun 30 Apr 2006, 15:07
Location: Maidenhead, England

Mele A1000

#17 Post by DC »

a few tests on Mele A1000,

feels faster than first alpha
eth0 working thanks to
IhaveU3 wrote:

Code: Select all

dhcpcd -t 30 -h fatdog -d eth0
NFS working to a readynas box
Plays AVI ok - video and sound
Plays MP4 some ok others slow - video and sound
MP3's - choppy
Ogg - nothing
JPG - ok
save file from first alpha ok

thanks

dc
a little bit of knowledge and I'm dangerous

IhaveU3
Posts: 12
Joined: Sat 08 Mar 2014, 02:17
Location: Sydney

WiFi

#18 Post by IhaveU3 »

Howdy puppies
Seems like my wifi dongle is recognised, however I can not get it to authenticate :(
wpa_supplicant v2.0
random: Trying to read entropy from /dev/random
Successfully initialized wpa_supplicant
Initializing interface 'wlan0' conf '/etc/network-setup/access/wlan0-manual1' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/network-setup/access/wlan0-manual1' -> '/etc/network-setup/access/wlan0-manual1'
Reading configuration file '/etc/network-setup/access/wlan0-manual1'
ctrl_interface='DIR=/var/run/wpa_supplicant GROUP=users'
update_config=1
Line: 8 - start of a new network block
ssid - hexdump_ascii(len=10):
44 6f 67 73 62 72 65 61 74 68 Dogsbreath
proto: 0x3
key_mgmt: 0x2
PSK (ASCII passphrase) - hexdump_ascii(len=8): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 0
id=0 ssid='Dogsbreath'
WEXT: cfg80211-based driver detected
wext: interface wlan0 phy: phy1
rfkill: Cannot open RFKILL control device
WEXT: RFKILL status not available
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0x1f flags 0x0
netlink: Operstate: linkmode=1, operstate=5
wlan0: Own MAC address: 00:a8:2b:00:00:c3
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wlan0: RSN: flushing PMKID list in the driver
wlan0: Setting scan request: 0 sec 100000 usec
WPS: Set UUID for interface wlan0
WPS: UUID based on MAC address - hexdump(len=16): e7 fe f9 4b 00 a3 50 11 9b 9d a3 61 77 e0 db 2f
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: Supplicant port status: Unauthorized
EAPOL: Supplicant port status: Unauthorized
ctrl_interface_group=500 (from group name 'users')
wlan0: Added interface wlan0
wlan0: State: DISCONNECTED -> DISCONNECTED

User avatar
Ted Dog
Posts: 3965
Joined: Wed 14 Sep 2005, 02:35
Location: Heart of Texas

#19 Post by Ted Dog »

wifi dongle.. OK IT SOUNDS WIERD BUT I USED FATDOG64 ON MY LAPTOP WITH WIFI DONGLE usb device and after successfully using it to hook to my access point just copied the resulting etc folders and used them on my Mele.. its was just a setup script issue ( not.same on Arm version ) not a running dongle issue for me..

User avatar
jeff-nelson
Posts: 20
Joined: Thu 21 Feb 2013, 23:59
Location: South Lake Tahoe, CA
Contact:

gslapt, slapt-get, pkgtool

#20 Post by jeff-nelson »

I dont know where you get the time to support all this, Mr. Bond.
gslapt, slapt-get, pkgtool
Are you planning to actually support apt-get? I know its not the Puppy-way, but it would be really, really nice if the normal Linux distribution tools were more fully supported and configured out-of-the-box.

The One Hundred Dollar Question..... do you think this distribution is stable enough that I should run out and buy an Odroid to try it?

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#21 Post by 01micko »

I think you miss something Mr Nelson.

FatDog-Arm uses pkgtool (official slackware), GSlapt and slapt-get (3rd party slackware) tools as a matter of choice (by jamesbond) instead of adapting FatDog Package Manager. I believe because it is a simple system.

In *no way* does FatDog Arm support SlackwareArm packages; they are built for armv5. That doesn't mean they wont run, but I wouldn't bother trying. I would rather, if I desired a package from there, compile the package using the slackbuild script and adapting that script into a native (to FatDog Arm) pkgbuild script for consideration by Mr Bond for the repository.

I guess now you understand that apt (etc) is not, nor ever will be, at least in the immediate future, considered for use in FatDog-Arm. (Of course I am in no way speaking for jamesbond, but I don't *think* his response would be much different in substance, perhaps more comprehensive).

No one can tell you how to spend your hard earned, but I happen to love this software on my Odroid. I actually have 2 micro SD cards with FatDog-Arm on them now; nuked Ubuntu.

Cheers
Puppy Linux Blog - contact me for access

User avatar
jeff-nelson
Posts: 20
Joined: Thu 21 Feb 2013, 23:59
Location: South Lake Tahoe, CA
Contact:

#22 Post by jeff-nelson »

Sounds awesome.

I'm thinking of putting together a home server based on this distribution, with features like mail server, web server, media sharing, video player, etc.
[url]http://www.jeff-nelson.com[/url]
[url]http://blog.jeff-nelson.com[/url]

User avatar
Ted Dog
Posts: 3965
Joined: Wed 14 Sep 2005, 02:35
Location: Heart of Texas

#23 Post by Ted Dog »

yep and home brew wireless access point and or mesh networking... Its somewhat like the golden age of the pre IBM pc and Microsoft.. Everybody is hacking together a thing called a computer and could do it on the cheap if you did not mind having to do stuff on our own.
I have made a promise not to buy another computer like gadget or a year or until I pour the foundation for my own house... I am think a really really small house like a tumbleweed home could work.. I can add on later :D in a week it will only be 8 more months...

jamesbond
Posts: 3433
Joined: Mon 26 Feb 2007, 05:02
Location: The Blue Marble

#24 Post by jamesbond »

IHaveU3 - your dongle rtl8192cu is supported (mine is also rtl8192). But your disconnection - why did you need to use the "manual" configuration to create the wpa_supplicant configuration file? Do you connect to a hidden SSID?

01micko, you are absolutely correct :) I have nothing else to add :)
Fatdog64 forum links: [url=http://murga-linux.com/puppy/viewtopic.php?t=117546]Latest version[/url] | [url=https://cutt.ly/ke8sn5H]Contributed packages[/url] | [url=https://cutt.ly/se8scrb]ISO builder[/url]

IhaveU3
Posts: 12
Joined: Sat 08 Mar 2014, 02:17
Location: Sydney

wifi

#25 Post by IhaveU3 »

Fred again
Hi James :D
No I don't have hidden SSID, however was trying to connect after the install.sh would not let me establish a connection.
Tried to connect without any encryption settings on the wifi router.

Here is the output from wpa_supplicant:
----------------------------------------------------------------------------------------------------------
wpa_supplicant v2.0
random: Trying to read entropy from /dev/random
Successfully initialized wpa_supplicant
Initializing interface 'wlan0' conf '/etc/network-setup/access/wlan0-Dogsbreath' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/network-setup/access/wlan0-Dogsbreath' -> '/etc/network-setup/access/wlan0-Dogsbreath'
Reading configuration file '/etc/network-setup/access/wlan0-Dogsbreath'
ctrl_interface='DIR=/var/run/wpa_supplicant GROUP=users'
update_config=1
Line: 10 - start of a new network block
ssid - hexdump_ascii(len=10):
44 6f 67 73 62 72 65 61 74 68 Dogsbreath
key_mgmt: 0x4
auth_alg: 0x1
Priority group 0
id=0 ssid='Dogsbreath'
WEXT: cfg80211-based driver detected
wext: interface wlan0 phy: phy0
rfkill: Cannot open RFKILL control device
WEXT: RFKILL status not available
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0x1f flags 0x0
netlink: Operstate: linkmode=1, operstate=5
wlan0: Own MAC address: 00:a8:2b:00:00:c3
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wlan0: RSN: flushing PMKID list in the driver
wlan0: Setting scan request: 0 sec 100000 usec
WPS: Set UUID for interface wlan0
WPS: UUID based on MAC address - hexdump(len=16): e7 fe f9 4b 00 a3 50 11 9b 9d a3 61 77 e0 db 2f
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: Supplicant port status: Unauthorized
EAPOL: Supplicant port status: Unauthorized
ctrl_interface_group=500 (from group name 'users')
wlan0: Added interface wlan0
wlan0: State: DISCONNECTED -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
random: Got 20/20 bytes from /dev/random
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
WEXT: if_removed already cleared - ignore event
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
WEXT: if_removed already cleared - ignore event
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
WEXT: if_removed already cleared - ignore event
Wireless event: cmd=0x8b1a len=8
wlan0: State: DISCONNECTED -> SCANNING
---------------------------------------------------------------------------------------------------------
Here is output of dmesg:
---------------------------------------------------------------------------------------------------------
wlan0: authenticate with 00:1b:9e:08:70:95
Mar 25 15:14:03 fatdog-arm-d41 kern.info kernel: [ 488.347121] wlan0: send auth to 00:1b:9e:08:70:95 (try 1/3)
Mar 25 15:14:03 fatdog-arm-d41 kern.info kernel: [ 488.349319] wlan0: authenticated
Mar 25 15:14:03 fatdog-arm-d41 kern.info kernel: [ 488.349425] rtl8192cu 1-3.1:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
Mar 25 15:14:03 fatdog-arm-d41 kern.info kernel: [ 488.349431] rtl8192cu 1-3.1:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
Mar 25 15:14:03 fatdog-arm-d41 kern.info kernel: [ 488.350996] wlan0: associate with 00:1b:9e:08:70:95 (try 1/3)
Mar 25 15:14:03 fatdog-arm-d41 kern.info kernel: [ 488.365552] wlan0: RX AssocResp from 00:1b:9e:08:70:95 (capab=0x401 status=0 aid=1)
Mar 25 15:14:03 fatdog-arm-d41 kern.info kernel: [ 488.367123] wlan0: associated
Mar 25 15:14:03 fatdog-arm-d41 kern.info kernel: [ 488.367144] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Mar 25 15:14:16 fatdog-arm-d41 kern.info kernel: [ 501.413392] wlan0: deauthenticating from 00:1b:9e:08:70:95 by local choice (reason=3)
Mar 25 15:14:16 fatdog-arm-d41 kern.info kernel: [ 501.440822] cfg80211: Calling CRDA to update world regulatory domain
Mar 25 15:19:03 fatdog-arm-d41 kern.info kernel: [ 788.472391] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

I must not be holding my nose right :)
Confused Fred

IhaveU3
Posts: 12
Joined: Sat 08 Mar 2014, 02:17
Location: Sydney

wifi

#26 Post by IhaveU3 »

Yippy yip yippy
WiFi dongle now working :D
It appears to have been caused by running wpa_supplicant more then once:
Did a ps aux | grep wpa
Output: wpa_supplicant -B -i wlan0 -Dnl80211 -c/etc/network-setup/access/lan0-Dogsbreath
Than used:
dhcpcd -t 30 -h fatdog -d wlan0
Wifi now associated
Happy Fred :D

mories
Posts: 70
Joined: Mon 21 Dec 2009, 12:51

minor problem with pkeys

#27 Post by mories »

The pkeys parameter does not work properly. In rc.sysinit is used

Code: Select all

ls /lib/keymaps/${pkeys}*
what do not exist.

Mercedes350se
Posts: 790
Joined: Wed 16 Apr 2008, 11:28

#28 Post by Mercedes350se »

When I purchased my U3 I also bought the Ubuntu SD card with the intention of installing FatdogArm.

Gparted shows the following:

unallocated 2MiB
/dev/sdd1 fat32 size 128MiB used 7.53MiB
/dev/sdd2 ext2 size 4.10GiB used 3.85GiB
unallocated size 3.19GiB

However /dev/sdd2 has a warning triangle which if information is clicked gives

Warning:
e2label: Filesystem has unsupported feature(s) while trying to open /dev/sdd2
Couldn't find valid filesystem superblock.


I haven't tried the SD card in the U3 - the eMMC works as expected.

I assume, because there are issues with the filesystem, that is why, when I /mnt/sdd2, I see nothing in that partition.

Just curious before I install FatdogArm.

jamesbond
Posts: 3433
Joined: Mon 26 Feb 2007, 05:02
Location: The Blue Marble

#29 Post by jamesbond »

IhaveU3 wrote:Yippy yip yippy
WiFi dongle now working :D
Glad you have made it to work, Fred, congrats!
It appears to have been caused by running wpa_supplicant more then once:
Did a ps aux | grep wpa
Output: wpa_supplicant -B -i wlan0 -Dnl80211 -c/etc/network-setup/access/lan0-Dogsbreath
Than used:
dhcpcd -t 30 -h fatdog -d wlan0
I wouldn't have guessed that you run wpa_supplicant twice. I was beginning to think that your dongle isn't correctly initialised because I don't see the "loading firmware" message. But glad you make it work.

By the way, why don't you use the network wizard from control panel? Why the need to run wpa_supplicant and dhcpcd manually?
mories wrote:The pkeys parameter does not work properly. In rc.sysinit is used

Code: Select all

ls /lib/keymaps/${pkeys}*
what do not exist.
Thank you for reporting the bug. I'll get this fixed.

@Mercedes350se,
I don't have the Ubuntu pre-loaded SD Card from HK, so I can't tell, but the Ubuntu image that I have (which I downloaded from HK forum), the FAT32 and the ext4 partitions can both be accessed without error.

@All,
I have updated Odroid's kernel package with driver for rtl8188eu (popularly known as TP-WN725N) wifi dongle.

cheers!
Fatdog64 forum links: [url=http://murga-linux.com/puppy/viewtopic.php?t=117546]Latest version[/url] | [url=https://cutt.ly/ke8sn5H]Contributed packages[/url] | [url=https://cutt.ly/se8scrb]ISO builder[/url]

User avatar
ally
Posts: 1957
Joined: Sat 19 May 2012, 19:29
Location: lincoln, uk
Contact:

#30 Post by ally »

my odroid U3 being delivered today.....getting excited......

:)

mories
Posts: 70
Joined: Mon 21 Dec 2009, 12:51

Obconf problem

#31 Post by mories »

Fatdog running quite well in ODROID-u3. Very good job.

Obconf failed to find obconf.ui.
I think it's problem of change in source of gladedir by resourcedir.
Copying obconf.ui in the current directory works correctly.

jamesbond
Posts: 3433
Joined: Mon 26 Feb 2007, 05:02
Location: The Blue Marble

#32 Post by jamesbond »

Thanks mories, fixed. You re-install obconf from the repo.
Still working on that pkeys thing, though.
Fatdog64 forum links: [url=http://murga-linux.com/puppy/viewtopic.php?t=117546]Latest version[/url] | [url=https://cutt.ly/ke8sn5H]Contributed packages[/url] | [url=https://cutt.ly/se8scrb]ISO builder[/url]

User avatar
ally
Posts: 1957
Joined: Sat 19 May 2012, 19:29
Location: lincoln, uk
Contact:

#33 Post by ally »

hey guys

awesome work!

couple of Qs please

1. the image to tv through hdmi is over-scanning by about half an icon all round, how do I adjust?

2. sound, no sound out via hdmi - is this to b expected?

regards

:)

jamesbond
Posts: 3433
Joined: Mon 26 Feb 2007, 05:02
Location: The Blue Marble

Re: minor problem with pkeys

#34 Post by jamesbond »

mories wrote:The pkeys parameter does not work properly. In rc.sysinit is used

Code: Select all

ls /lib/keymaps/${pkeys}*
what do not exist.
Fixed. Patch:

Code: Select all

--- fatdog-scripts/etc/rc.d/rc.sysinit
+++ fatdog-scripts/etc/rc.d/rc.sysinit
@@ -128,14 +128,15 @@
 
 # load keymaps and console fonts - rc.country no longer used
 # modified from original keymap loading code (c) Barry K
 [ -z "$pkeys" ] && [ -e /etc/keymap ] && read pkeys < /etc/keymap 
 if [ "$pkeys" ]; then
-       pkeys=$(ls /lib/keymaps/${pkeys}* | sed -ne '1 {s|^.*/||; p}')
+       pkeys_path="$(find /lib/keymaps/ -name "${pkeys}*" | head -n 1)"
+       pkeys=${pkeys_path##*/}
        if [ "$pkeys" ]; then
                echo ${pkeys%%.*} > /etc/keymap
-               zcat /lib/keymaps/$pkeys | loadkmap 
+               zcat $pkeys_path | loadkmap 
                case $pkeys in 
                        de*|be*|br*|dk*|es*|fi*|fr*|it*|no*|se*|pt*)
                                modprobe nls_cp850
                                zcat /lib/consolefonts/lat1-12.psfu.gz | loadfont
                                echo lat1-12.psfu > /etc/fontmap
Fatdog64 forum links: [url=http://murga-linux.com/puppy/viewtopic.php?t=117546]Latest version[/url] | [url=https://cutt.ly/ke8sn5H]Contributed packages[/url] | [url=https://cutt.ly/se8scrb]ISO builder[/url]

jamesbond
Posts: 3433
Joined: Mon 26 Feb 2007, 05:02
Location: The Blue Marble

#35 Post by jamesbond »

ally wrote:hey guys

awesome work!
Thanks.
1. the image to tv through hdmi is over-scanning by about half an icon all round, how do I adjust?
Try to adjust your TV for "Just Scan". If there is no such thing, try to adjust to zoom factor on your TV. If you're using HDMI-to-VGA or HDMI-to-DVI, then I don't know ... don't have the hardware.
2. sound, no sound out via hdmi - is this to b expected?
There is sound. Open terminal and type "speaker-test -t wav -c 2" and you should hear something. If you mean sound from web-browser, launch "fatdog soundcard wizard" from control panel, choose the first entry (output, I think) and from there choose "fix rate at 44100". You should hear sound from web too.

Good luck.
Fatdog64 forum links: [url=http://murga-linux.com/puppy/viewtopic.php?t=117546]Latest version[/url] | [url=https://cutt.ly/ke8sn5H]Contributed packages[/url] | [url=https://cutt.ly/se8scrb]ISO builder[/url]

Post Reply