Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Tue 16 Oct 2018, 17:55
All times are UTC - 4
 Forum index » Advanced Topics » Puppy Derivatives
Puppy Arcade 11
Moderators: Flash, JohnMurga
Post new topic   Reply to topic View previous topic :: View next topic
Page 4 of 7 [95 Posts]   Goto page: Previous 1, 2, 3, 4, 5, 6, 7 Next
Author Message
sc0ttman


Joined: 16 Sep 2009
Posts: 2603
Location: UK

PostPosted: Sun 21 Dec 2014, 07:19    Post subject: Re: How to make romloader load on startup?
Subject description: rom config and romloader doesn't seem to work
 

jmccutcheon wrote:
I have tried everything I can to make the romloader load on system startup and autoload the romloader cfg file with no luck. I HAVE read the readme thoroughly and cannot manage to make it work. I can load paloader on startup, but until I go in with a mouse/keyboard and press the "load" button, the romloader.cfg does not work, thus neither does the gamepad.

Anyone willing to step me through this? I'm sure its a series of moron-moments on my part.

Thank you.

Hmmm.. That's odd... Rom-Loader *always* loads up the 'romloader' profile when it starts ... If the profile is valid, it should work - it always works for me, on various system, with various pads...

------------------
Anyway.. I just tested a few methods, they all worked for me .. Here is the simplest one used:

1. Go to Rom-Loader->Settings->Joypads.. make sure your pad is working (click 'Detect' and 'Calibrate') and then setup the' romloader' joypad profile how you like, in Rom-Loader settings.

2. Open up /root/Startup/joystick-daemon in a text editor. Look at the last two lines:

Code:
#quit
exit 0


..Before these lines, add the following commands:

Code:
rejoystick1cc --load --profile romloader
paloader -f -s &


...So to be clear, the end of the file will look like this:

Code:

rejoystick1cc --load --profile romloader
paloader -f -s &

#quit
exit 0



3. Save the script, close the text editor and make sure /root/Startup/joypad-damon is executable (right click on it, go to properties)..

4. Finally, restart the desktop... Rom-Loader should then load up and be navigable with your joypad.

----------------
That worked for me, all other methods are variations of this one.
(Note, using this method, clicking 'Detect' in Rom-Loader Joypad settings will load another Rom-Loader copy .. So dont click it, just let puppy detect ur pad when the desktop starts... )

If that doesn't work for you, try changing to a different gamepad, and then re-setup the 'romloader' joypad controls ..

_________________
Akita Linux, VLC-GTK, Pup Search, Pup File Search
Back to top
View user's profile Send private message 
martyj


Joined: 28 Nov 2014
Posts: 27
Location: Czech Republic

PostPosted: Tue 06 Jan 2015, 07:50    Post subject:  

Hello, I've installed Puppy arcade 11 and I cannot run Atari emulation. Always get a error "Emulation halted, you need an original Atari OS" or something like that. What should I do ? Thanks
Back to top
View user's profile Send private message Visit poster's website 
sc0ttman


Joined: 16 Sep 2009
Posts: 2603
Location: UK

PostPosted: Sun 11 Jan 2015, 21:07    Post subject:  

martyj wrote:
Hello, I've installed Puppy arcade 11 and I cannot run Atari emulation. Always get a error "Emulation halted, you need an original Atari OS" or something like that. What should I do ? Thanks

Did you install the Atari BIOS in the Rom-Loader settings?

If so, maybe try switching to the other Atari emulator in Rom-Loader settings.

.. If ur talking about the Atari ST emulator (hatari), I cant help you - I have no idea how to make it work.

_________________
Akita Linux, VLC-GTK, Pup Search, Pup File Search
Back to top
View user's profile Send private message 
JVincent

Joined: 12 Jan 2015
Posts: 1

PostPosted: Mon 12 Jan 2015, 05:35    Post subject:  

Hi there,

I'm currently thinking about using Puppy Arcade on my Asus Chromebox (Haswell-based Celeron CPU, model 2955U w/ integrated Intel GPU). I don't know which audio chip it has, I guess its a regular integrated Intel HD Audio chip there.

Does Puppy Arcade support such hardware properly so that it would run just like on a normal PC with a dedicated GPU?
Back to top
View user's profile Send private message 
bark_bark_bark

Joined: 05 Jun 2012
Posts: 1935
Location: Wisconsin USA

PostPosted: Wed 14 Jan 2015, 11:17    Post subject:  

Are you willing to make a port of Puppy Arcade for the raspberry pi computer board?
_________________
....
Back to top
View user's profile Send private message 
pmonacular

Joined: 18 Jan 2015
Posts: 1

PostPosted: Sun 18 Jan 2015, 05:08    Post subject:  

Hello!

First and foremost, thank you for making such a wonderful distro! As someone who is still relatively new to the linux world, I really appreciate having something like puppy arcade with minimal setup involved for emulation. I have run into a bit of a snag, though...

I have mapped some profiles with rejoystick (for an old Logitech Dual Action), and everything seems great while setting it up. However, when I get into a game, the buttons on my joypad work, but my directional pad/analog sticks do not. After doing some research, I've noticed that a lot of people who have used JScalibrator experience this same issue, and that uninstalling it (and deleting any files it may leave behind) will fix the issue.

Since I am still in the process of trying to figure out how to uninstall JScalibrator, I figured I would come here to see if you have ever heard of a similar issue, and if you may know of any other workarounds for this. Thanks again!

Since I am here...


JVincent wrote:
Hi there,

I'm currently thinking about using Puppy Arcade on my Asus Chromebox (Haswell-based Celeron CPU, model 2955U w/ integrated Intel GPU). I don't know which audio chip it has, I guess its a regular integrated Intel HD Audio chip there.

Does Puppy Arcade support such hardware properly so that it would run just like on a normal PC with a dedicated GPU?


As someone who has setup emulators on plenty of grossly underpowered machines, I would say it depends on the emulator, but most of them should work fine.
Back to top
View user's profile Send private message 
sc0ttman


Joined: 16 Sep 2009
Posts: 2603
Location: UK

PostPosted: Thu 22 Jan 2015, 19:26    Post subject:  

pmonacular wrote:
Hello!

First and foremost, thank you for making such a wonderful distro! As someone who is still relatively new to the linux world, I really appreciate having something like puppy arcade with minimal setup involved for emulation. I have run into a bit of a snag, though...

I have mapped some profiles with rejoystick (for an old Logitech Dual Action), and everything seems great while setting it up. However, when I get into a game, the buttons on my joypad work, but my directional pad/analog sticks do not. After doing some research, I've noticed that a lot of people who have used JScalibrator experience this same issue, and that uninstalling it (and deleting any files it may leave behind) will fix the issue.

Since I am still in the process of trying to figure out how to uninstall JScalibrator, I figured I would come here to see if you have ever heard of a similar issue, and if you may know of any other workarounds for this. Thanks again!

Hi pmonacular, you're welcome. My pleasure .. I've been playing RR4 and Policenaughts on it Smile

About your joypad problem:

You don't need to uninstall JSCalibrator .. It only calibrates if you tell it to..

I have a Logitech Dual Action which has messed up analog sticks - everything is in reverse until after I run the joystick calibrator thing (the 'Calibrate' buton in Rom-Loader settings) .. I also have another Logitech Dual Action which looks exactly the same but this one does not like being calibrated.

The JSCalibrator program probably leaves hidden files in the "/root" folder, I think.. (Click the 'Eye' to see hidden files, which start with a . )

The files you want to delete are probably at /root/.jscalibrator (file or folder) or something similar ... If nothing is in /root, then try /etc .. I can't guarantee that deleting the files will solve your problem.

So.. How to fix?

If browsing your roms in Rom-Loader with your joypad isn't even working after you setup the Rom-Loader profile, then try doing it both before and after re-calibration.. If that didn't help, try changing pads to be sure.

If, after setting up your Rom-Loader profile, you are able to successfully browse Rom-Loader using your pad, but not able to play games once they load, then check you have setup the profile for that emulator correctly, or setup the controls in the emulator correctly..

If you setup your controls during play from within the emulator itself, and it is not working, try using a different input plugin, or even a different emulator for that system..

If you are using Rejoystick to setup your gaming controls, and are sure that all controls are mapped correctly, ..... maybe try a different pad!


JVincent wrote:
Hi there,

I'm currently thinking about using Puppy Arcade on my Asus Chromebox (Haswell-based Celeron CPU, model 2955U w/ integrated Intel GPU). I don't know which audio chip it has, I guess its a regular integrated Intel HD Audio chip there.

Does Puppy Arcade support such hardware properly so that it would run just like on a normal PC with a dedicated GPU?

The mose recent version based on Slacko should work, although performance will be best on more powerful hardware I guess ... Not sure if you will be able to play N64, but most others yes. Even PCSX (for playstation) can run without 3d acceleration, if using the "Software renderer" .. It's all about getting settings that suit you.

_________________
Akita Linux, VLC-GTK, Pup Search, Pup File Search
Back to top
View user's profile Send private message 
sc0ttman


Joined: 16 Sep 2009
Posts: 2603
Location: UK

PostPosted: Thu 22 Jan 2015, 19:34    Post subject:  

bark_bark_bark wrote:
Are you willing to make a port of Puppy Arcade for the raspberry pi computer board?

Rom-Loader is just a bunch of shell scripts that rely on gtkdialog for browing roms, etc, and then sending command line options to various emulators once you chose a rom .... In other words, it should be easy enough to make it work on any linux that has gtkdialog and some of the supported emulators..

[note] to be honest, some parts of rom-loader are quite slow - building the rom list, for example ... if someone wanted it on the pi, that bits may need to be re-written in awk or something faster..

_________________
Akita Linux, VLC-GTK, Pup Search, Pup File Search
Back to top
View user's profile Send private message 
jeffrosie

Joined: 10 Feb 2015
Posts: 3
Location: UK

PostPosted: Tue 10 Feb 2015, 15:31    Post subject: Puppy Arcade Slllooooowww  

Hi there,

First of all, thanks very much for putting together Puppy Arcade, you've brought two I my favorite things together, Puppy Linux and arcade games.

I've had this working previously on a couple year old laptop, no problems, but I want to put a frugal install on a new computer I just built...playing around with the Live CD of the latest release Slacko Puppy Arcade 11 the games are slow, sound is slow, video is slow.

At first I couldn't get any games to run (in MAME), it would open a window then crash out...when I run debug I got this:

Quote:
/usr/local/xmame-0.106/xmame.x11 -rompath
"/mnt/sda1/root/my-roms/:/usr/lib/games/mame/:/usr/lib/games/neogeo/" -cheat
-cheat_file '/usr/lib/games/xmame/cheat.dat' -hiscore_file
'/usr/lib/games/xmame/hiscore.dat' -cfg_directory '/root/.xmame/cfg' -inipath
'/root/.xmame/ini' -nvram_directory '/root/.xmame/nvram' -memcard_directory
'/root/.xmame/memcard' -input_directory '/root/.xmame/inp' -state_directory
'/root/.xmame/sta' -arbheight '0' -heightscale '1' -widthscale '1' -effect '0'
-autodouble -frameskipper '0' -nosleepidle -autoframeskip -displayaspectratio
'1.33000' -nocursor -mitshm -gltexture_size '0' -glbilinear -nocabview -samples
-samplefreq '22050' -bufsize '3' -volume '-3' -alsa-buffer '250000' -joydevname
'/dev/js0' -nousbpspad -norapidfire -nograbmouse -nograbkeyboard -nowinkeys
-nougcicoin -artwork -use_backdrops -use_overlays -use_bezels -noartwork_crop
-skip_gameinfo -noloadconfig -nofullscreen -video-mode '1' -gldblbuffer
-geometry '800x600' -noglantialias -joytype '1' -analogstick "pbaction":
loading rom 5: a-s7.bin
loading rom 6: a-s8.bin
loading rom 7: a-j5.bin
loading rom 8: a-j6.bin
loading rom 9: a-j7.bin
loading rom 10: a-j8.bin
loading rom 11: b-c7.bin
loading rom 12: b-d7.bin
loading rom 13: b-f7.bin
done
info: set to 16bit linear stereo 22050Hz
info: sysdep_dsp: using alsa plugin
info: sysdep_mixer: using oss plugin
MIT-SHM & XV Extensions Available. trying to use.
Can't find a suitable RGB format - trying YUY2 instead.
YUY2 not available - trying YV12.
Error: Couldn't initialise Xv port -
Either all ports are in use, or the video card
doesn't provide a suitable format.
video_init failed


If I go to Settings and click Enable OpenGL, then the games work, albeit horribly slow.

I tried the video upgrade wizard, but it says I'm using Intel video and not applicable.

Please let me know if there is anything I can try or any more info I can post for you.

Cheers,
jeff
Back to top
View user's profile Send private message 
sc0ttman


Joined: 16 Sep 2009
Posts: 2603
Location: UK

PostPosted: Tue 10 Feb 2015, 16:15    Post subject:  

Hi jeffrosie,

What hardware are you trying to run it on? It might be too old for the most recent one..

If you tried the most recnt (slacko based) version .. You could try this one instead: http://akita.scottjarvis.com/puppy-arcade-11-k2.6.25.16.iso

It is *mostly* the same although targeted at older hardware ...

_________________
Akita Linux, VLC-GTK, Pup Search, Pup File Search
Back to top
View user's profile Send private message 
jeffrosie

Joined: 10 Feb 2015
Posts: 3
Location: UK

PostPosted: Tue 10 Feb 2015, 17:53    Post subject:  

Thanks for the reply. This is a computer I just built, so pretty new hardware...

I've run a hardware info for you:

Quote:
Computer
Summary
Computer
Processor 2x Intel(R) Celeron(R) CPU J1800 @ 2.41GHz
Memory 3004MB (391MB used)
Machine Type Physical machine
Operating System Slacko Puppy - 5.9.3
User Name root (root)
Date/Time Tue 10 Feb 2015 09:51:20 PM GMT-8
Display
Resolution 1280x1024 pixels
OpenGL Renderer Software Rasterizer
X11 Vendor The X.Org Foundation
Audio Devices
Audio Adapter HDA-Intel - HDA Intel
Input Devices
Power Button
Sleep Button
Power Button
HDA Digital PCBeep
HDA Intel Line
HDA Intel Front Mic
HDA Intel Rear Mic
HDA Intel Front Headphone
HDA Intel Line Out
PC Speaker
Primax Lenovo Laser Mouse
NOVATEK USB NETVISTA FULL WIDTH KEYBOARD
NOVATEK USB NETVISTA FULL WIDTH KEYBOARD
Printers (CUPS)
CUPS-PDF Default
SCSI Disks
TSSTcorp CDDVDW SH-224DB
ATA KINGSTON SV300S3
Operating System
Version
Kernel Linux 3.4.94 (i686)
Version #1 SMP Sun Jun 22 12:59:42 EST 2014
C Library GNU C Library version 2.17 (stable)
Distribution Slacko Puppy - 5.9.3
Current Session
Computer Name puppypc15092
User Name root (root)
Home Directory /root
Desktop Environment Unknown (Window Manager: JWM)
Misc
Uptime 3 hours 13 minutes
Load Average 0.31, 0.25, 0.15
Kernel Modules
Loaded Modules
cpufreq_ondemand 'cpufreq_ondemand' - A dynamic cpufreq governor for Low Latency Frequency Transition capable processors
drm_kms_helper DRM KMS helper
drm DRM shared core routines
i2c_algo_bit I2C-Bus bit-banging algorithm
i2c_core I2C-Bus main module
serio_raw Raw serio driver
pcspkr PC Speaker beeper driver
snd_hda_codec_realtek Realtek HD-audio codec
r8169 RealTek RTL-8169 Gigabit Ethernet driver
snd_hda_intel Intel HDA driver
snd_hda_codec HDA codec core
snd_hwdep Hardware dependent layer
snd_pcm_oss PCM OSS emulation for ALSA.
snd_mixer_oss Mixer OSS emulation for ALSA.
snd_pcm Midlevel PCM code for ALSA.
snd_page_alloc Memory allocator for ALSA system.
snd_seq_dummy ALSA sequencer MIDI-through client
snd_seq_oss OSS-compatible sequencer module
snd_seq_midi Advanced Linux Sound Architecture sequencer MIDI synth.
snd_seq_midi_event MIDI byte <-> sequencer event coder
snd_rawmidi Midlevel RawMidi code for ALSA.
snd_seq Advanced Linux Sound Architecture sequencer.
shpchp Standard Hot Plug PCI Controller Driver
snd_timer ALSA timer interface
snd_seq_device ALSA sequencer device management
snd Advanced Linux Sound Architecture driver for soundcards.
soundcore Core sound module
fan ACPI Fan Driver
parport_pc PC-style parallel port driver
parport
thermal ACPI Thermal Zone Driver
video ACPI Video Driver
evdev Input driver event char devices
button ACPI Button Driver
acpi_cpufreq ACPI Processor P-States Driver
mperf
processor ACPI Processor Driver
thermal_sys Generic thermal management sysfs support
hwmon hardware monitoring sysfs/class support
Boots
Boots
Languages
Available Languages
en_US English locale for the USA
en_US.utf8 English locale for the USA
Filesystems
Mounted File Systems
rootfs / 2.20 % (3.4 GiB of 3.4 GiB)
tmpfs /initrd/pup_rw 2.20 % (3.4 GiB of 3.4 GiB)
tmpfs /initrd/mnt/tmpfs 99.58 % (1000.0 KiB of 235.2 MiB)
/dev/loop0 /initrd/pup_ro2 100.00 % (0.0 B of 234.2 MiB)
tmpfs /initrd/mnt/tmpfs4 96.33 % (1000.0 KiB of 26.6 MiB)
/dev/loop4 /initrd/pup_z 100.00 % (0.0 B of 25.8 MiB)
unionfs / 2.20 % (3.4 GiB of 3.4 GiB)
devtmpfs /dev 0.00 % (1.4 GiB of 1.4 GiB)
shmfs /dev/shm 0.00 % (662.5 MiB of 662.5 MiB)
/dev/sda1 /mnt/sda1 69.00 % (18.3 GiB of 59.1 GiB)
Display
Display
Resolution 1280x1024 pixels
Vendor The X.Org Foundation
Version 1.14.3
Monitors
Monitor 0 1280x1024 pixels
Extensions
BIG-REQUESTS
Composite
DAMAGE
DOUBLE-BUFFER
DPMS
DRI2
GLX
Generic Event Extension
MIT-SCREEN-SAVER
MIT-SHM
RANDR
RECORD
RENDER
SGI-GLX
SHAPE
SYNC
X-Resource
XC-MISC
XFIXES
XFree86-DGA
XFree86-VidModeExtension
XINERAMA
XInputExtension
XKEYBOARD
XTEST
XVideo
OpenGL
Vendor Mesa Project
Renderer Software Rasterizer
Version 2.1 Mesa 9.1.7
Direct Rendering Yes
Environment Variables
Environment Variables
HOSTNAME puppypc15092
XDG_DATA_HOME /root/.local/share
TERM xterm
SHELL /bin/bash
HISTSIZE 1000
QT_XFT true
DEFAULTDRAW inkscapelite
MOZILLA_FIVE_HOME /usr/lib/firefox-24.6.0
XLIB_SKIP_ARGB_VISUALS 1
USER root
HISTFILESIZE 2000
LD_LIBRARY_PATH /usr/lib/firefox-24.6.0:/lib:/usr/lib:/usr/X11R7/lib:/root/my-applications/lib:/usr/local/lib
LS_COLORS bd=33:cd=33
GDK_USE_XFT 1
LANGORG en_US.UTF-8
RGBDEF /usr/share/X11/rgb.txt
OOO_FORCE_DESKTOP gnome
DEFAULTIMAGEVIEWER gpicview
MOZ_DISABLE_PANGO 1
DEFAULTPAINT mtpaint
MOZ_PLUGIN_PATH /usr/lib/mozilla/plugins
XDG_CONFIG_DIRS /etc/xdg
PATH /bin:/usr/bin:/sbin:/usr/sbin:/usr/local/bin:/usr/X11R7/bin:/root/my-applications/bin:/usr/games
DEFAULTBROWSER firefox
DEFAULTMEDIAPLAYER gnome-mplayer
PWD /root
INPUTRC /etc/inputrc
DEFAULTIMAGEEDITOR mtpaint
EDITOR mp
LANG en_US.UTF-8
XFINANSDIR /root/.xfinans
DEFAULTHTMLEDITOR mozedit
DEFAULTSPREADSHEET gnumeric
HISTCONTROL ignoredups
HOME /root
SHLVL 3
XDG_CONFIG_HOME /root/.config
XDG_CACHE_HOME /root/.cache
LOGNAME root
G_FILENAME_ENCODING @locale
PREFIX /usr
XDG_DATA_DIRS /usr/share:/usr/local/share
TEXTDOMAIN xwin
WINDOWPATH 4
DISPLAY :0
MM_RUNASROOT 1
DEFAULTTEXTEDITOR geany
DEFAULTWORDPROCESSOR abiword
OUTPUT_CHARSET UTF-8
G_BROKEN_FILENAMES 1
_ /usr/bin/hardinfo
Devices
Processor
Processors
Intel(R) Celeron(R) CPU J1800 @ 2.41GHz 1328.00MHz
Intel(R) Celeron(R) CPU J1800 @ 2.41GHz 2408.00MHz
Memory
Memory
Total Memory 3004604 kB
Free Memory 2076396 kB
Buffers 62244 kB
Cached 541660 kB
Cached Swap 0 kB
Active 371668 kB
Inactive 514876 kB
Active(anon) 314552 kB
Inactive(anon) 316472 kB
Active(file) 57116 kB
Inactive(file) 198404 kB
Unevictable 0 kB
Mlocked 0 kB
High Memory 2129188 kB
Free High Memory 1295784 kB
Low Memory 875416 kB
Free Low Memory 780612 kB
Virtual Memory 3998716 kB
Free Virtual Memory 3998716 kB
Dirty 0 kB
Writeback 0 kB
AnonPages 282620 kB
Mapped 55960 kB
Shmem 348400 kB
Slab 27676 kB
SReclaimable 13764 kB
SUnreclaim 13912 kB
KernelStack 936 kB
PageTables 1452 kB
NFS_Unstable 0 kB
Bounce 0 kB
WritebackTmp 0 kB
CommitLimit 5501016 kB
Committed_AS 1068440 kB
VmallocTotal 122880 kB
VmallocUsed 7552 kB
VmallocChunk 113360 kB
DirectMap4k 12280 kB
DirectMap4M 897024 kB
PCI Devices
PCI Devices
Host bridge Intel Corporation Device 0f00 (rev 0c)
VGA compatible controller Intel Corporation Device 0f31 (rev 0c) (prog-if 00 [VGA controller])
SATA controller Intel Corporation Device 0f23 (rev 0c) (prog-if 01 [AHCI 1.0])
USB Controller Intel Corporation Device 0f35 (rev 0c) (prog-if 30 [XHCI])
Encryption controller Intel Corporation Device 0f18 (rev 0c)
Audio device Intel Corporation Device 0f04 (rev 0c)
PCI bridge Intel Corporation Device 0f48 (rev 0c) (prog-if 00 [Normal decode])
PCI bridge Intel Corporation Device 0f4a (rev 0c) (prog-if 00 [Normal decode])
PCI bridge Intel Corporation Device 0f4c (rev 0c) (prog-if 00 [Normal decode])
PCI bridge Intel Corporation Device 0f4e (rev 0c) (prog-if 00 [Normal decode])
USB Controller Intel Corporation Device 0f34 (rev 0c) (prog-if 20 [EHCI])
ISA bridge Intel Corporation Device 0f1c (rev 0c)
SMBus Intel Corporation Device 0f12 (rev 0c)
Ethernet controller Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
USB Controller Renesas Technology Corp. Device 0014 (rev 03) (prog-if 30 [XHCI])
USB Devices
USB Devices

2.0 root hub
2.0 root hub
3.0 root hub
Printers
Printers (CUPS)
CUPS-PDF Default
Battery
No batteries
No batteries found on this system
Sensors
Temperature
temp1 (acpitz) 26.80°C
Input Devices
Input Devices
Power Button
Sleep Button
Power Button
HDA Digital PCBeep
HDA Intel Line
HDA Intel Front Mic
HDA Intel Rear Mic
HDA Intel Front Headphone
HDA Intel Line Out
PC Speaker
Primax Lenovo Laser Mouse
NOVATEK USB NETVISTA FULL WIDTH KEYBOARD
NOVATEK USB NETVISTA FULL WIDTH KEYBOARD
Storage
SCSI Disks
TSSTcorp CDDVDW SH-224DB
ATA KINGSTON SV300S3
DMI
BIOS
Date 03/06/2014
Vendor American Megatrends Inc. (www.ami.com)
Version F3
Board
Name J1800N-D2H
Vendor Gigabyte Technology Co., Ltd. (www.gigabyte.com.tw)
Memory SPD
SPD
Please load the eeprom module to obtain information about memory SPD
Resources
I/O Ports
0000-006f PCI Bus 0000:00
0000-001f dma1
0020-0021 pic1
0040-0043 timer0
0050-0053 timer1
0060-0060 keyboard
0064-0064 keyboard
0070-0077 rtc0
0078-0cf7 PCI Bus 0000:00
0080-008f dma page reg
00a0-00a1 pic2
00c0-00df dma2
00f0-00ff fpu
0378-037a parport0
03c0-03df vga+
03f8-03ff serial
0400-047f pnp 00:04
0400-0403 ACPI PM1a_EVT_BLK
0404-0405 ACPI PM1a_CNT_BLK
0408-040b ACPI PM_TMR
0420-042f ACPI GPE0_BLK
0450-0450 ACPI PM2_CNT_BLK
0500-05fe pnp 00:04
0600-061f pnp 00:04
0680-069f pnp 00:04
0a00-0a2f pnp 00:05
0a30-0a3f pnp 00:05
0a40-0a4f pnp 00:05
0cf8-0cff PCI conf1
0d00-ffff PCI Bus 0000:00
164e-164f pnp 00:04
2000-2fff PCI Bus 0000:02
3000-3fff PCI Bus 0000:03
4000-4fff PCI Bus 0000:04
e000-efff PCI Bus 0000:01
e000-e0ff PCI Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
e000-e0ff Module RealTek RTL-8169 Gigabit Ethernet driver
f000-f01f PCI Intel Corporation Device 0f12 (rev 0c)
f020-f03f PCI Intel Corporation Device 0f23 (rev 0c) (prog-if 01 [AHCI 1.0])
f020-f03f ahci
f040-f043 PCI Intel Corporation Device 0f23 (rev 0c) (prog-if 01 [AHCI 1.0])
f040-f043 ahci
f050-f057 PCI Intel Corporation Device 0f23 (rev 0c) (prog-if 01 [AHCI 1.0])
f050-f057 ahci
f060-f063 PCI Intel Corporation Device 0f23 (rev 0c) (prog-if 01 [AHCI 1.0])
f060-f063 ahci
f070-f077 PCI Intel Corporation Device 0f23 (rev 0c) (prog-if 01 [AHCI 1.0])
f070-f077 ahci
f080-f087 PCI Intel Corporation Device 0f31 (rev 0c) (prog-if 00 [VGA controller])
Memory
00000000-0000ffff reserved
00010000-0008d7ff System RAM
0008d800-0009ffff reserved
000a0000-000bffff PCI Bus 0000:00
000a0000-000bffff Video RAM area
000c0000-000dffff PCI Bus 0000:00
000c0000-000c7fff Video ROM
000e0000-000fffff PCI Bus 0000:00
000e0000-000fffff reserved
000f0000-000fffff System ROM
00100000-1fffffff System RAM
01000000-01514084 Kernel code
01514085-01712a7f Kernel data
01795000-017d4fff Kernel bss
20000000-200fffff reserved
20100000-b95cffff System RAM
b95d0000-b95fffff reserved
b9600000-b960ffff ACPI Tables
b9610000-b9741fff ACPI Non-volatile Storage
b9742000-b9ba0fff reserved
b9ba1000-b9ba1fff System RAM
b9ba2000-b9be3fff reserved
b9be4000-b9d53fff System RAM
b9d54000-b9ff9fff reserved
b9ffa000-b9ffffff System RAM
ba000000-bbffffff RAM buffer
c0000000-d0816ffe PCI Bus 0000:00
c0000000-cfffffff PCI Intel Corporation Device 0f31 (rev 0c) (prog-if 00 [VGA controller])
d0000000-d03fffff PCI Intel Corporation Device 0f31 (rev 0c) (prog-if 00 [VGA controller])
d0400000-d04fffff PCI Intel Corporation Device 0f18 (rev 0c)
d0500000-d05fffff PCI Intel Corporation Device 0f18 (rev 0c)
d0600000-d06fffff PCI Bus 0000:02
d0600000-d0601fff PCI Renesas Technology Corp. Device 0014 (rev 03) (prog-if 30 [XHCI])
d0600000-d0601fff xhci_hcd
d0700000-d07fffff PCI Bus 0000:01
d0700000-d0703fff PCI Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
d0700000-d0703fff Module RealTek RTL-8169 Gigabit Ethernet driver
d0704000-d0704fff PCI Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
d0704000-d0704fff Module RealTek RTL-8169 Gigabit Ethernet driver
d0800000-d080ffff PCI Intel Corporation Device 0f35 (rev 0c) (prog-if 30 [XHCI])
d0800000-d080ffff xhci_hcd
d0810000-d0813fff PCI Intel Corporation Device 0f04 (rev 0c)
d0810000-d0813fff ICH HD audio
d0814000-d081401f PCI Intel Corporation Device 0f12 (rev 0c)
d0815000-d08153ff PCI Intel Corporation Device 0f34 (rev 0c) (prog-if 20 [EHCI])
d0815000-d08153ff ehci_hcd
d0816000-d08167ff PCI Intel Corporation Device 0f23 (rev 0c) (prog-if 01 [AHCI 1.0])
d0816000-d08167ff ahci
e0000000-efffffff PCI MMCONFIG 0000 [bus 00-ff]
e00f8000-e00f8fff reserved
fec00000-fec003ff IOAPIC 0
fed00000-fed003ff HPET 0
fed01000-fed01fff reserved
fed01000-fed01fff pnp 00:0a
fed03000-fed03fff pnp 00:0a
fed04000-fed04fff pnp 00:0a
fed08000-fed08fff pnp 00:0a
fed0c000-fed0ffff pnp 00:0a
fed1c000-fed1cfff pnp 00:0a
fee00000-feefffff pnp 00:0a
fee00000-fee00fff Local APIC
fef00000-feffffff pnp 00:0a
ffb00000-ffffffff reserved
DMA
4 cascade
Back to top
View user's profile Send private message 
sc0ttman


Joined: 16 Sep 2009
Posts: 2603
Location: UK

PostPosted: Sat 14 Feb 2015, 12:18    Post subject:  

Hi jeff,

Have you tried the version of Slacko in which this latest Puppy Arcade is based?

Have you tried the k2.6.25.16 version of Puppy Arcade 11 (which is based on a completely different puppy)?

This should help us work out what the problem is, cos at the moment, I have no idea, sorry...

Am I correct in guessing you're using on-board Intel graphics?
If so, that might not be up to par on this puppy setup for some reason...

_________________
Akita Linux, VLC-GTK, Pup Search, Pup File Search
Back to top
View user's profile Send private message 
jeffrosie

Joined: 10 Feb 2015
Posts: 3
Location: UK

PostPosted: Mon 23 Feb 2015, 12:31    Post subject:  

Thanks for the reply. I have not tried the Slacko version alone, but I did go back I think 4 versions all with the same problem...

Yes, I'm using the onboard video...this machine flies as you would expect with Puppy...just not the old school games. When I have some time I'll get back into trying to solve.

Cheers,
jeff
Back to top
View user's profile Send private message 
trister

Joined: 01 Mar 2015
Posts: 103

PostPosted: Mon 09 Mar 2015, 16:09    Post subject: any chance of a puppy arcade .pet sfs (like puppy-arcade 8?)  

Amazing job!!!


Just asking ... Any chance of a puppy arcade .pet sfs (like puppy-arcade 8?).
Back to top
View user's profile Send private message 
sc0ttman


Joined: 16 Sep 2009
Posts: 2603
Location: UK

PostPosted: Mon 06 Apr 2015, 08:31    Post subject: Re: any chance of a puppy arcade .pet sfs (like puppy-arcade 8?)  

trister wrote:
Amazing job!!!


Just asking ... Any chance of a puppy arcade .pet sfs (like puppy-arcade 8?).

Thanks very much!

I am not sure if I can do a pet or SFS.. there might be no point - many of the emulators may only work on slacko .. ands that is quite likely .. certainly mednafen is fussy.. and others..

but.. i may re-release puppy arcade at some point ... i noticed the kernel in the slacko beta that i used has something messed up with joypad support - my ps2 to usb wont work on it.. it does in other pups..

so i will make sure to use a different base next time.. i will keep it recent as possible, hopefully without losing any of the goodies added to the 2.6.25.16 kernel i was using...

will be summer at the earliest...

_________________
Akita Linux, VLC-GTK, Pup Search, Pup File Search
Back to top
View user's profile Send private message 
Display posts from previous:   Sort by:   
Page 4 of 7 [95 Posts]   Goto page: Previous 1, 2, 3, 4, 5, 6, 7 Next
Post new topic   Reply to topic View previous topic :: View next topic
 Forum index » Advanced Topics » Puppy Derivatives
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.2146s ][ Queries: 12 (0.0552s) ][ GZIP on ]