LxPup : a Puppy with LXDE as its desktop environment
Driver RTL8192CU must be installed by user,
Driver RTL8192CU must be installed by user, in spite of WLAN1 appears in the menu. Could you provide these drivers for LXpup kernels ? Merci messieurs.
People sometimes use their laptop not at home and need to connect to Public spots. That is the case where i live. Spots are offered free of charge by the city. But you need the driver for Puppy Linux OS used (LXpup and kernel)
Rcrsn51 provides a pet.
look here for 8192cu_xenial_701-k4.5.2.
People sometimes use their laptop not at home and need to connect to Public spots. That is the case where i live. Spots are offered free of charge by the city. But you need the driver for Puppy Linux OS used (LXpup and kernel)
Rcrsn51 provides a pet.
look here for 8192cu_xenial_701-k4.5.2.
Last edited by Pelo on Sat 27 May 2017, 11:43, edited 6 times in total.
Re: Driver RTL8192CU must be installed by user,
Wifi drivers and firmware come from the pup that LxPup is based on - in this case LxPupXenial-16.08.2 is based on Xenialpup CE 7.0.4Pelo wrote:Driver RTL8192CU must be installed by user, in spite of WLAN1 appears in the menu. Could you provide these drivers for LXpup kernels ? Merci messieurs.
People sometimes use their laptop not at home and need to connect to Public spots. That is the case where i live. Spots are offered free of charge by the city. But you need the driver for Puppy Linux OS used (LXpup and kernel)
Rcrsn51 provides a pet for 7.0.2 LXpup version.
I intend to take a glance at LXQt pup seen in sourceforge here.
Any missing items need to be raised with Xenialpup....
I would caution against looking too closely at LxQtPup as it has had no development since Dec 2014 and none is planned. It has its own thread: http://murga-linux.com/puppy/viewtopic.php?t=95020
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
LXQt soon will replace LXDE...
"I would caution against looking too closely at LxQtPup as it has had no development since Dec 2014 " I will feed back if LXQTpup is however serviceable an if this marry well with my computer ( Medion p7624 bought 2012)
LXQt soon will replace LXDE...
I suppose the dev was Jejy69, a guy from France, a neighbor. He was very young. Perhaps he has developed ... a family
About LXpup, for surfing outside with my laptop, wireless connected to public hot spots, i will change the kernel if no drivers found for my antenna.
An SFS lxQt is available (19MB)
How-to-do : lxpup has a trash, where files are stored before deleting. But how do you delete them ? Delete is in the choice (right-click menu on Trash) solved
LXQt soon will replace LXDE...
I suppose the dev was Jejy69, a guy from France, a neighbor. He was very young. Perhaps he has developed ... a family
About LXpup, for surfing outside with my laptop, wireless connected to public hot spots, i will change the kernel if no drivers found for my antenna.
An SFS lxQt is available (19MB)
How-to-do : lxpup has a trash, where files are stored before deleting. But how do you delete them ? Delete is in the choice (right-click menu on Trash) solved
Re: Keyboard Layout handler - no flags in the panel
How to change USA flag by England (UK), and add France one ? French is not included as choice. I change by setxkbmap fr in terminal.riedzig wrote:Hi Peebee
I'm still using your excellent LXpup as No. 1 among all distros, but I am also trying to get through some bugs (not found in forums). One of them is the Keyboard Layout switcher/handler), which won't show in any LXPup the appropriate flags in the panel (shows only a blank frame). Do you please know a solution?
Germany flag is included in choice. french is more used than German, even by Puppy users.
I learn English at school, but Cambridge one, not NYC. That is the reason why EN is more accurate than US. Australian flag should be available too, for Puppy native country, won't it ?
Peebee should agree on my request,Give to Caesar what is Caesar's
- Attachments
-
- Bandera.jpg
- Le bon drapeau, c'est mieux
- (24.67 KiB) Downloaded 562 times
Last edited by Pelo on Sat 27 May 2017, 11:42, edited 2 times in total.
Updated 13-jun-2017
For testing....
LxPupXenial-17.06.00
a derivative of Xenialpup 7.0.8.1 beta from 666philb
Notes:
Not a UEFI iso - just bios boot
Identifies as xenialpup-7.0.8.1 so cannot update any previous LxPupXenial save
Not a new woof-ce build - a derivative
For testing....
LxPupXenial-17.06.00
a derivative of Xenialpup 7.0.8.1 beta from 666philb
Notes:
Not a UEFI iso - just bios boot
Identifies as xenialpup-7.0.8.1 so cannot update any previous LxPupXenial save
Not a new woof-ce build - a derivative
Last edited by peebee on Tue 13 Jun 2017, 11:18, edited 3 times in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
LxPup : a Puppy with LXDE as its desktop environment
Manual frugal install to the hard drive:
System: Host: puppypc14216 Kernel: 4.9.13 i686 (32 bit) Desktop: LXDE (Openbox 3.6.1)
Distro: xenialpup 7.0.8.1
Machine: Device: desktop System: Compaq-Presario product: AU194AA-A2L CQ5123F serial: MXX9300M0F
Mobo: MSI model: Boston v: 1.0 BIOS: Phoenix v: 5.24 date: 06/19/2009
CPU: Dual core Pentium E5200 (-MCP-) speed/max: 2000/2500 MHz
Graphics: Card: NVIDIA GF108 [GeForce GT 430]
Display Server: X.org 1.18.4 driver: nvidia tty size: 156x41 Advanced Data: N/A for root
Network: Card: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller driver: r8169
Drives: HDD Total Size: 562.5GB (9.7% used)
Weather: Conditions: 28 F (-2 C) - Mostly Cloudy Time: March 19, 10:05 AM EDT
Info: Processes: 167 Uptime: 1:43 Memory: 332.2/3153.7MB Client: Shell (bash) inxi: 2.3.8
I installed applications with PPM + pets + compiled mplayer snapshot.
It's working well so far.
Thanks.
System: Host: puppypc14216 Kernel: 4.9.13 i686 (32 bit) Desktop: LXDE (Openbox 3.6.1)
Distro: xenialpup 7.0.8.1
Machine: Device: desktop System: Compaq-Presario product: AU194AA-A2L CQ5123F serial: MXX9300M0F
Mobo: MSI model: Boston v: 1.0 BIOS: Phoenix v: 5.24 date: 06/19/2009
CPU: Dual core Pentium E5200 (-MCP-) speed/max: 2000/2500 MHz
Graphics: Card: NVIDIA GF108 [GeForce GT 430]
Display Server: X.org 1.18.4 driver: nvidia tty size: 156x41 Advanced Data: N/A for root
Network: Card: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller driver: r8169
Drives: HDD Total Size: 562.5GB (9.7% used)
Weather: Conditions: 28 F (-2 C) - Mostly Cloudy Time: March 19, 10:05 AM EDT
Info: Processes: 167 Uptime: 1:43 Memory: 332.2/3153.7MB Client: Shell (bash) inxi: 2.3.8
I installed applications with PPM + pets + compiled mplayer snapshot.
It's working well so far.
Thanks.
- Attachments
-
- Screenshot.jpg
- (50.88 KiB) Downloaded 1288 times
Manual frugal install, today. Everything works, well; I installed evince from the tahr repo, didn't care for the default pdf viewer.
Code: Select all
root# inxi -bw
System: Host: xenial_1703 Kernel: 4.9.13 i686 (32 bit)
Desktop: LXDE (Openbox 3.6.1) Distro: xenialpup 7.0.8.1
Machine: Device: portable System: Dell product: Inspiron N5050
Mobo: Dell model: 01HXXJ v: A05
BIOS: Dell v: A05 date: 08/03/2012
Battery BAT0: charge: 44.0 Wh 102.3% condition: 43.0/44.0 Wh (98%)
CPU: Dual core Intel Core i3-2350M (-HT-MCP-) speed/max: 1641/2300 MHz
Graphics: Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller
Display Server: X.org 1.18.4 drivers: intel (unloaded: modesetting,fbdev,vesa)
tty size: 80x24 Advanced Data: N/A for root
Network: Card-1: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
driver: r8169
Card-2: Broadcom BCM4313 802.11bgn Wireless Network Adapter
driver: bcma-pci-bridge
Drives: HDD Total Size: 500.1GB (26.0% used)
Weather: Conditions: 52 F (11 C) - Clear Time: March 23, 3:33 PM EDT
Info: Processes: 189 Uptime: 2:55 Memory: 355.7/3446.1MB
Client: Shell (bash) inxi: 2.3.8
- Attachments
-
- screenshot_1703.jpg
- lxpupxenial-17.03.00
- (57 KiB) Downloaded 1172 times
Installed and set up LxPupXenial-17.03.00 on the core 2 duo laptop. No problems noted. Once it was set up I went back and stripped Palemoon and resquashed the main SFS. I am running slimjet 13.0.8.0 (OscarTalks SFS) as the main browser. Perfectly acceptable toolbar fonts in this install and it helped me figure out those fonts in LxPupSc.
video-info-glx 1.5.1 Sun 26 Mar 2017 on LxPupXenial 7.0.8.1 Linux 4.9.13 i686
2.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
X Server: Xorg Driver: intel
X.Org version: 1.18.4
dimensions: 1280x800 pixels (338x211 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Mobile Intel® GM45 Express Chipset x86/MMX/SSE2
OpenGL version string: 2.1 Mesa 12.0.6
Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz
Core 0: @800 1: @800 MHz
Edit: Also set it up on the Pentium M laptop using the LxPupSc 'alternative' 4.4.52 kernel. Normal fast boot, good glxgears FPS, normal suspend etc. Test installed it sucessfully on the BayTrail desktop as a samba shares and print server. Grub4Dos frugal installs on both, running the main SFS sans Palemoon using slimjet from SFS. I've used it quite a bit the past few days on the core 2 duo laptops and this version of xenialpup now has a lot of the rock solid feel tahrpup has. Earlier versions didn't to me.
Thanks,
video-info-glx 1.5.1 Sun 26 Mar 2017 on LxPupXenial 7.0.8.1 Linux 4.9.13 i686
2.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
X Server: Xorg Driver: intel
X.Org version: 1.18.4
dimensions: 1280x800 pixels (338x211 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Mobile Intel® GM45 Express Chipset x86/MMX/SSE2
OpenGL version string: 2.1 Mesa 12.0.6
Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz
Core 0: @800 1: @800 MHz
Edit: Also set it up on the Pentium M laptop using the LxPupSc 'alternative' 4.4.52 kernel. Normal fast boot, good glxgears FPS, normal suspend etc. Test installed it sucessfully on the BayTrail desktop as a samba shares and print server. Grub4Dos frugal installs on both, running the main SFS sans Palemoon using slimjet from SFS. I've used it quite a bit the past few days on the core 2 duo laptops and this version of xenialpup now has a lot of the rock solid feel tahrpup has. Earlier versions didn't to me.
Thanks,
Pups currently in kennel :D Older LxPupSc and X-slacko-4.4 for my users; LxPupSc, LxPupSc64 and upupEF for me. All good pups indeed, and all running savefiles for look'n'feel only. Browsers, etc. solely from SFS.
Puppies LXpup are a real pleasure to run.
feed back from users : Puppies LXpup are a real pleasure to run.. Xenial the same. Bravo. I hope this family has a Long life...
I Will create a QT version in 2017, at home.
I Will create a QT version in 2017, at home.
Last edited by Pelo on Sat 27 May 2017, 11:55, edited 1 time in total.
still with LXpup 7.0.1 kernel 4.5.2
still with LXpup 7.0.1 kernel 4.5.2 (dongle driver 8192Cu available at rcrsn51 shop)
Two reasons not to load new versions :
FFMpeg
Laptops cannot be used as Laptops (bring your laptop in your car, as instance) :
So roots are old people, not interested in public relation, shopping, and they do as old engineers playing with old locomotives, out of breath. That was why jejy did a frexit with french team, in the past (supposed).
Pls do new topic with last version, because lxpup is worth to be at the top.
See Xenial kernel 4.5.2 here
Two reasons not to load new versions :
FFMpeg
Laptops cannot be used as Laptops (bring your laptop in your car, as instance) :
So roots are old people, not interested in public relation, shopping, and they do as old engineers playing with old locomotives, out of breath. That was why jejy did a frexit with french team, in the past (supposed).
Pls do new topic with last version, because lxpup is worth to be at the top.
See Xenial kernel 4.5.2 here
-
- Posts: 104
- Joined: Wed 11 Nov 2009, 03:45
- Contact:
Can't delete folder from Trash
It tells me there are errors when I try. I also can not restore the folder because it says it can't restore files recursively. I am using xenial 16.0.8
Re: Can't delete folder from Trash
I don't have a boot of LxPupXenial-16.08 to hand but I tested on LxPupSc and all worked as I expected. Nobody else has reported this problem so I rather suspect your particular setup/configuration....When I get a chance I'll test LxPupXenial-16.08noalternative wrote:It tells me there are errors when I try. I also can not restore the folder because it says it can't restore files recursively. I am using xenial 16.0.8
Try looking at the trash directly using roxfiler - it's a hidden file in the root of the device - e.g. /mnt/home/.Trash-0
[Bit later] Tested on LxPupXenial-16.08.2 - works fine.... Has the path to the original folder changed sine you deleted the folder? Have a look in /mnt/home/.Trash-0/info at the xxx.trashinfo file.....
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
-
- Posts: 104
- Joined: Wed 11 Nov 2009, 03:45
- Contact:
Re: Can't delete folder from Trash
there is no hidden .Trash-0 folder in /mnt/home though I did not PERSONALLY move it.peebee wrote:I don't have a boot of LxPupXenial-16.08 to hand but I tested on LxPupSc and all worked as I expected. Nobody else has reported this problem so I rather suspect your particular setup/configuration....When I get a chance I'll test LxPupXenial-16.08noalternative wrote:It tells me there are errors when I try. I also can not restore the folder because it says it can't restore files recursively. I am using xenial 16.0.8
Try looking at the trash directly using roxfiler - it's a hidden file in the root of the device - e.g. /mnt/home/.Trash-0
[Bit later] Tested on LxPupXenial-16.08.2 - works fine.... Has the path to the original folder changed sine you deleted the folder? Have a look in /mnt/home/.Trash-0/info at the xxx.trashinfo file.....
This is a frugal usb install. Would that make a difference?
-
- Posts: 104
- Joined: Wed 11 Nov 2009, 03:45
- Contact:
Re: Can't delete folder from Trash[SOLVED]
noalternative wrote:there is no hidden .Trash-0 folder in /mnt/home though I did not PERSONALLY move it.peebee wrote:I don't have a boot of LxPupXenial-16.08 to hand but I tested on LxPupSc and all worked as I expected. Nobody else has reported this problem so I rather suspect your particular setup/configuration....When I get a chance I'll test LxPupXenial-16.08noalternative wrote:It tells me there are errors when I try. I also can not restore the folder because it says it can't restore files recursively. I am using xenial 16.0.8
Try looking at the trash directly using roxfiler - it's a hidden file in the root of the device - e.g. /mnt/home/.Trash-0
[Bit later] Tested on LxPupXenial-16.08.2 - works fine.... Has the path to the original folder changed sine you deleted the folder? Have a look in /mnt/home/.Trash-0/info at the xxx.trashinfo file.....
This is a frugal usb install. Would that make a difference?
Apparently in LXXenial this is more like Ubuntu than Slackware or Puppy because I tried a command for deleting stubborn files in Ubuntu and it worked.
sudo rm -rf ~/.local/share/Trash/*
version 1.4 of pupmd5sum.sh is available
http://murga-linux.com/puppy/viewtopic.php?t=84019
http://murga-linux.com/puppy/viewtopic.php?t=84019
I've updated the test version of LxPupXenial to version 17.06.00...
There is an iso and a delta from 17.03.00 on SourceForge
Still a derivative of XenialPup-7.0.8.1 with 32-bit kernel 4.9.13 nopae
There is an iso and a delta from 17.03.00 on SourceForge
Still a derivative of XenialPup-7.0.8.1 with 32-bit kernel 4.9.13 nopae
- Attachments
-
- capture14720.png
- (59.51 KiB) Downloaded 1698 times
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
-
- Posts: 104
- Joined: Wed 11 Nov 2009, 03:45
- Contact:
Could you make an LXPup based on Quirky April? I want to try one that uses packages made for puppy. Many Ubuntu packages just don't speak puppy, and I don't have good luck with slackware.
http://barryk.org/news/?viewDetailed=00195
http://barryk.org/news/?viewDetailed=00195
Hinoalternative wrote:Could you make an LXPup based on Quirky April? I want to try one that uses packages made for puppy. Many Ubuntu packages just don't speak puppy, and I don't have good luck with slackware.
http://barryk.org/news/?viewDetailed=00195
I did make .pets back in 2015:
http://www.murga-linux.com/puppy/viewto ... 210#807210
https://sourceforge.net/projects/lxpup/ ... y-April64/
but I'm afraid I don't have the effort to take them any further....sorry!
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Re: LxPup : a Puppy with LXDE as its desktop environment
i just downloaded lxpup 17
how do i remove libreoffice?
can i change firefox 52 to google chrome?
i cant install
qcomix
mixxx
zsnes
fcemu
wps office
how do i remove libreoffice?
can i change firefox 52 to google chrome?
i cant install
qcomix
mixxx
zsnes
fcemu
wps office
Re: LxPup : a Puppy with LXDE as its desktop environment
1. you will need to remaster to really remove items - or you can delete/rename items in /usr/share/applications to just remove them from the menur3n4n wrote:i just downloaded lxpup 17
how do i remove libreoffice?
can i change firefox 52 to google chrome?
i cant install
qcomix
mixxx
zsnes
fcemu
wps office
2. Google do not provide a 32-bit version of Chrome for some time now
3. What do you mean by "can't install"????
You need to provide much more detail of your installation and boot setup.....
and these are basic questions about how Puppy works (i.e. not LxPup specific) which will probably be better answered in other parts of the forum.
Cheers
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64