X-Slacko-4.4 with Xfce
I don't normally 'do' betas, dunno why -- but I think I'll take a look at X-Slacko 3b7. Caro Vanguard is turning out to be a little temperamental regarding what CPU it runs on -- see the thread for details -- and on top of that the older CUPS in there is starting to annoy me a little too much. I'm kind of tired of having to change the print settings every single time I want to print something from LibreOffice.
"It's the little things in life..."
"It's the little things in life..."
We did this (more than once?) on the Forum about 1-2yrs ago. According to my fallible memory, you have to blacklist something and run it as something else. One of the regular Forum members (Technosaurus? someone else?) is an out-and-out expert on NIC chip indiscretions. BK has alluded to it in one of his many missives. Guess it's down to 'Search' - good luck.rt2800usb based WiFi card
But it can be made to function correctly, I do remember that.
hello
how to log into xSlacko correctly?
somehow i broke my xfce reboot function.
if i click shutdown from xfce menu, then reboot, nothing happens.
i was trying to find a CLI way to shutdown, and ended up logging out of xwin. somehow logged back in, but i think i logged in the wrong way. (i used xwin startxfce4, i think).
how to get back to correct session and restore reboot function?
thx
how to log into xSlacko correctly?
somehow i broke my xfce reboot function.
if i click shutdown from xfce menu, then reboot, nothing happens.
i was trying to find a CLI way to shutdown, and ended up logging out of xwin. somehow logged back in, but i think i logged in the wrong way. (i used xwin startxfce4, i think).
how to get back to correct session and restore reboot function?
thx
[b]Now[/b]: X-Tahr 2.0! StretchDog! DevuanDog!
[b]Tops[/b]: TarhNOP Vlina-R2 Racy
[b]Used[/b]: Puppeee Precise Lucid Wary Tahrpup Quirky Slacko MacPup Saluki Puppy Studio LxPupTarh Lina-Lite Lina
[i]i ♥ Puppy[/i]
[b]Tops[/b]: TarhNOP Vlina-R2 Racy
[b]Used[/b]: Puppeee Precise Lucid Wary Tahrpup Quirky Slacko MacPup Saluki Puppy Studio LxPupTarh Lina-Lite Lina
[i]i ♥ Puppy[/i]
Code: Select all
xwin
Code: Select all
poweroff
Code: Select all
reboot
It sounds like you have a corrupt savefile, though. Time for a new one! (or a reinstall, if you did *ugh* a full installation.)
thx for these, rg66! i could not find them anyplacerg66 wrote:Code: Select all
xwin xfce4-session wmpoweroff wmreboot
are they universal xfce commands, or xSlacko-only?
also, is there a way on xSlacko to get a "computer will shutdown in 30 seconds" countdown shutdown, like Tahrpup has?
thx!
[b]Now[/b]: X-Tahr 2.0! StretchDog! DevuanDog!
[b]Tops[/b]: TarhNOP Vlina-R2 Racy
[b]Used[/b]: Puppeee Precise Lucid Wary Tahrpup Quirky Slacko MacPup Saluki Puppy Studio LxPupTarh Lina-Lite Lina
[i]i ♥ Puppy[/i]
[b]Tops[/b]: TarhNOP Vlina-R2 Racy
[b]Used[/b]: Puppeee Precise Lucid Wary Tahrpup Quirky Slacko MacPup Saluki Puppy Studio LxPupTarh Lina-Lite Lina
[i]i ♥ Puppy[/i]
Hey, rg, long time no chat.
Two questions.
(1) is there any chance of the next non-beta being released with say glibc2.19 instead of 2.17?
(2) and when do you expect it to be released?
Reason I'm asking is that rcrsn51 is trying to blame my current printer problems on Caro Vanguard (which is out-and-out BS, it worked fine on the same system, same config, until I rebuilt my savefile due to some other issues I was having) and there's not much I can do other than switch back to X-Slacko if I want help. (I'd like to say a few things about that, but I'm in public.)
Two questions.
(1) is there any chance of the next non-beta being released with say glibc2.19 instead of 2.17?
(2) and when do you expect it to be released?
Reason I'm asking is that rcrsn51 is trying to blame my current printer problems on Caro Vanguard (which is out-and-out BS, it worked fine on the same system, same config, until I rebuilt my savefile due to some other issues I was having) and there's not much I can do other than switch back to X-Slacko if I want help. (I'd like to say a few things about that, but I'm in public.)
How To Disable Lid Suspend (or install xfce power manager)?
hello
is it possible to disable lid-suspend on stock xSlacko beta-7? i cannot find in etc/acpi.
i see acpid-busibox is installed, but can't find how to use.
i see the acpitool in the repo below, but it does not appear to be installed on xSlacko. i did not install it yet:
http://distro.ibiblio.org/puppylinux/pe ... es-slacko/
ideally, i'd like to install xfce's own power manager. It works great on VLina.
i installed xfce4-power-manager-1.2.0-i486-2.txz in ppm, but when i run it i just get "power manager is not running, do you want to start it?". I click yes, and nothing happens. Dependency-checker says "nothing missing".
i found a Slackware package here:
http://packages.slackware.com/?r=slackw ... i486-1.txz
the slackware installed ok on xSlacko, but puppy says it needs the following depends, none of which are in the ppm, and only 2 of which i found in packages.slackware.com:
any solution appreciated!
many thx!
is it possible to disable lid-suspend on stock xSlacko beta-7? i cannot find in etc/acpi.
i see acpid-busibox is installed, but can't find how to use.
i see the acpitool in the repo below, but it does not appear to be installed on xSlacko. i did not install it yet:
http://distro.ibiblio.org/puppylinux/pe ... es-slacko/
ideally, i'd like to install xfce's own power manager. It works great on VLina.
i installed xfce4-power-manager-1.2.0-i486-2.txz in ppm, but when i run it i just get "power manager is not running, do you want to start it?". I click yes, and nothing happens. Dependency-checker says "nothing missing".
i found a Slackware package here:
http://packages.slackware.com/?r=slackw ... i486-1.txz
the slackware installed ok on xSlacko, but puppy says it needs the following depends, none of which are in the ppm, and only 2 of which i found in packages.slackware.com:
xfce4-power-manager has these missing library files:
libgbm.so.1 libxcb-dri3.so.0 libxcb-present.so.0 libxcb-sync.so.1 libxshmfence.so.1 libpng16.so.16 libupower-glib.so.1
any solution appreciated!
many thx!
[b]Now[/b]: X-Tahr 2.0! StretchDog! DevuanDog!
[b]Tops[/b]: TarhNOP Vlina-R2 Racy
[b]Used[/b]: Puppeee Precise Lucid Wary Tahrpup Quirky Slacko MacPup Saluki Puppy Studio LxPupTarh Lina-Lite Lina
[i]i ♥ Puppy[/i]
[b]Tops[/b]: TarhNOP Vlina-R2 Racy
[b]Used[/b]: Puppeee Precise Lucid Wary Tahrpup Quirky Slacko MacPup Saluki Puppy Studio LxPupTarh Lina-Lite Lina
[i]i ♥ Puppy[/i]
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
Except for xfce4-session those commands should be universal for puppy.johnywhy wrote:thx for these, rg66! i could not find them anyplacerg66 wrote:Code: Select all
xwin xfce4-session wmpoweroff wmreboot
are they universal xfce commands, or xSlacko-only?
also, is there a way on xSlacko to get a "computer will shutdown in 30 seconds" countdown shutdown, like Tahrpup has?
thx!
Run /etc/acpi/actions/acpi_poweroff.sh, that runs when pushing the power button and has a 30 second countdown timer.
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
If your printer worked with Vanguard before you rebuilt your savefile why not just start over with a new one.starhawk wrote:Hey, rg, long time no chat.
Two questions.
(1) is there any chance of the next non-beta being released with say glibc2.19 instead of 2.17?
(2) and when do you expect it to be released?
Reason I'm asking is that rcrsn51 is trying to blame my current printer problems on Caro Vanguard (which is out-and-out BS, it worked fine on the same system, same config, until I rebuilt my savefile due to some other issues I was having) and there's not much I can do other than switch back to X-Slacko if I want help. (I'd like to say a few things about that, but I'm in public.)
Glibc-2.21 is in the Slackware current repo:
ftp://ftp.slackware.com/pub/slackware/s ... /slackware
Look in the "a" and "l" directory, if your try them please report back.
I'm not sure when the next release will be. After 7 betas I figured I needed a break.
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
@ johnywhy
/etc/acpi/LID/00000080 is a symlink to /etc/acpi/actions/suspend.sh, I suppose you could try and rename it 00000080.bak or something and see if that works.
I've compiled xfce4-power-manager but never got it to work, same issue as you, "power manager is not running, do you want to start it?". I'll look into the missing libs for xfce4-power-manager-1.4.4.
If I recall correctly, the one that Geoffrey compiled for lina worked in X-slacko. I might be mistaken but give it a try anyway.
/etc/acpi/LID/00000080 is a symlink to /etc/acpi/actions/suspend.sh, I suppose you could try and rename it 00000080.bak or something and see if that works.
I've compiled xfce4-power-manager but never got it to work, same issue as you, "power manager is not running, do you want to start it?". I'll look into the missing libs for xfce4-power-manager-1.4.4.
If I recall correctly, the one that Geoffrey compiled for lina worked in X-slacko. I might be mistaken but give it a try anyway.
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
Re: savefile, that would be the third time this week, actually. Besides, I got the printer working finally anywaysrg66 wrote:If your printer worked with Vanguard before you rebuilt your savefile why not just start over with a new one.
Glibc-2.21 is in the Slackware current repo:
ftp://ftp.slackware.com/pub/slackware/s ... /slackware
Look in the "a" and "l" directory, if your try them please report back.
I'm not sure when the next release will be. After 7 betas I figured I needed a break.
I'll try the glibc upgrade and report back. Might be a minute before I do -- I've got a couple other things in front of that.
You deserve a break after seven betas! Take your time, man, I was just askin'.
Htop and pProcess giving "failed to install" error.
downloaded from this Slacko repo:
http://mirror.vcu.edu/pub/gnu_linux/pup ... es-slacko/
fyi, just reporting.
downloaded from this Slacko repo:
http://mirror.vcu.edu/pub/gnu_linux/pup ... es-slacko/
fyi, just reporting.
[b]Now[/b]: X-Tahr 2.0! StretchDog! DevuanDog!
[b]Tops[/b]: TarhNOP Vlina-R2 Racy
[b]Used[/b]: Puppeee Precise Lucid Wary Tahrpup Quirky Slacko MacPup Saluki Puppy Studio LxPupTarh Lina-Lite Lina
[i]i ♥ Puppy[/i]
[b]Tops[/b]: TarhNOP Vlina-R2 Racy
[b]Used[/b]: Puppeee Precise Lucid Wary Tahrpup Quirky Slacko MacPup Saluki Puppy Studio LxPupTarh Lina-Lite Lina
[i]i ♥ Puppy[/i]
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
pProcess dl'ed from link, installed and running without errors. Sounds like something is broken.johnywhy wrote:Htop and pProcess giving "failed to install" error.
downloaded from this Slacko repo:
http://mirror.vcu.edu/pub/gnu_linux/pup ... es-slacko/
fyi, just reporting.
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
hrm, here's my current package list. could one of these conflict?rg66 wrote:pProcess dl'ed from link, installed and running without errors. Sounds like something is broken.
fyi, all the libs and gst stuff are for claws.
- Attachments
-
- xslacko-packages1.jpg
- (66.55 KiB) Downloaded 1081 times
[b]Now[/b]: X-Tahr 2.0! StretchDog! DevuanDog!
[b]Tops[/b]: TarhNOP Vlina-R2 Racy
[b]Used[/b]: Puppeee Precise Lucid Wary Tahrpup Quirky Slacko MacPup Saluki Puppy Studio LxPupTarh Lina-Lite Lina
[i]i ♥ Puppy[/i]
[b]Tops[/b]: TarhNOP Vlina-R2 Racy
[b]Used[/b]: Puppeee Precise Lucid Wary Tahrpup Quirky Slacko MacPup Saluki Puppy Studio LxPupTarh Lina-Lite Lina
[i]i ♥ Puppy[/i]
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
My guess is PPM or corrupted .pets. I got a lot of those on an NTFS partition.johnywhy wrote:hrm, here's my current package list. could one of these conflict?rg66 wrote:pProcess dl'ed from link, installed and running without errors. Sounds like something is broken.
fyi, all the libs and gst stuff are for claws.
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
xfce4-power-manager-1.2.0-i486-2 does not seem to work on my xSlacko, even tho downloaded from xSlacko ppm.
when i run it from whisker, i get
if i again run it from whisker, i again get
thx!
when i run it from whisker, i get
So i click 'run' and then i do not see the Notification Area Icon.Xfce4 Power Manager is not running, do you want to launch it now?
if i again run it from whisker, i again get
is my xslacko damaged?Xfce4 Power Manager is not running, do you want to launch it now?
thx!
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
As I stated earlier, I get the same thing. I can compile it easily enough but it has never run in X-slacko. Not sure why, I can't track down the problem.johnywhy wrote: xfce4-power-manager-1.2.0-i486-2 does not seem to work on my xSlacko, even tho downloaded from xSlacko ppm.
when i run it from whisker, i getSo i click 'run' and then i do not see the Notification Area Icon.Xfce4 Power Manager is not running, do you want to launch it now?
if i again run it from whisker, i again getis my xslacko damaged?Xfce4 Power Manager is not running, do you want to launch it now?
thx!
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
zoom mode
oops, sorry i missed that.rg66 wrote:As I stated earlier, I get the same thing.
i'm using xslacko, and suddenly my desktop is in zoom mode. it's like when you change your resolution to a setting it cannot display, so you get a zoomed-in window, which auto-pans when you move your mouse around.
i must have hit some keyboard shortcut. not sure how to get out of it, but i like it! just want to know how to control it. maybe it's an xfce thing?
thx!
[b]Now[/b]: X-Tahr 2.0! StretchDog! DevuanDog!
[b]Tops[/b]: TarhNOP Vlina-R2 Racy
[b]Used[/b]: Puppeee Precise Lucid Wary Tahrpup Quirky Slacko MacPup Saluki Puppy Studio LxPupTarh Lina-Lite Lina
[i]i ♥ Puppy[/i]
[b]Tops[/b]: TarhNOP Vlina-R2 Racy
[b]Used[/b]: Puppeee Precise Lucid Wary Tahrpup Quirky Slacko MacPup Saluki Puppy Studio LxPupTarh Lina-Lite Lina
[i]i ♥ Puppy[/i]