Wine - run Windows programs in Linux
Would you please compile wine mono?
Tried to install .net frame 4.7.1, no luck.
Want to get the latest paint.net to work in wine.
We Don't Compile Windows Applications
This is Puppy Linux. We don't compile either Window Applications or the Extension which run under Wine. You can complain to the Maintainers at Wine that their .net Framework 4.7.1 doesn't work. But they know that. It's listed as Bronze, with a work-around, but the link to the work-around leads to a dead page. But you could try the Mono package from here: http://dl.winehq.org/wine/wine-mono/.
Note you can not install both Mono and .net Framework. If Mono is installed and you want to use .net Framework, you have to uninstall Mono, and vice-versa.
Or you could try the following: using winetricks you can install dotnet462 (which is MS .NET 4.6.2. Open a terminal and type wine winetricks dotnet462. Then you could then you could look for a copy of paint.net 4.0.16 which doesn't automatically install .net Framework 4.6.2. Or you could install paint.net 4.0.16 from here https://filehippo.com/download_paint.net/history/ which will automatically pull in .net Framework.
But, be forewarned. None of the above generated a working paint.net on my system and as the posts I found on WineHQ cautioned.
What I suggest is try using one of the several Graphics applications available under Linux. I don't know which version of Puppy you are using or I'd recommend some. For example, if you were running Xenialpup64, you might like Krita. See this comparison: https://www.slant.co/versus/5472/11484/ ... t_vs_krita. There's an AppImage of Krita which runs OOTB.
Without my knowing which Puppy you are using, I suggest you email hamoudoudou, advise him of which Puppy and ask for his advice. Or perhaps better yet, if you're not wedded to your Puppy, post a question on the User's Section, tell them what projects you want to undertake in graphics and ask for advice as to both OSes and Applications.
mikesLr
-
- Posts: 503
- Joined: Mon 09 Sep 2013, 00:00
- Location: Florida, USA
- Contact:
Wine-3.8
[wine-3.8 mirrors]
Updated a dependency: mpg123
wine-3.8_v1.1.pet _________ puppy 431 [stripped=true]
wine-3.8_v1.2.pet _________ puppy 431 [stripped=false]
wine_DEV-3.8_v1.1.pet ____ puppy 431
wine_DEV-3.8_v1.2.pet ____ puppy 431
wine-3.8_v2.1.pet _________ racy 5.5 [stripped=true]
wine-3.8_v2.2.pet _________ racy 5.5 [stripped=false]
wine_DEV-3.8_v2.1.pet ____ racy 5.5
wine_DEV-3.8_v2.2.pet ____ racy 5.5
wine-3.8_v3.1.pet _________ tahrpup 6.0.5 PAE [stripped=true]
wine-3.8_v3.2.pet _________ tahrpup 6.0.5 PAE [stripped=false]
wine_DEV-3.8_v3.1.pet ____ tahrpup 6.0.5 PAE
wine_DEV-3.8_v3.2.pet ____ tahrpup 6.0.5 PAE
wine_DOC-3.8.pet
wine_extras-v2.1.pet __________ menu entries | mirrors
md5.txt and hashdeep.txt ____ checksums/hashes | mirrors
----------------------------------------------------------------
Notes for my webpage
http://version2013.yolasite.com/page1.php
The ">" character points to a directory of download links, or an individual download link.
example:
> __ wine/3.8/
> _____wine-3.8_v1.1.pet
----------------------------------------------------------------
For general use, I recommend packages that are 'stripped=true'.
For submitting bug reports to WineHQ, I recommend packages that are 'stripped=false'.
When submitting bug reports to WineHQ, it appears a 'stripped=false' Wine provides more information than a 'stripped=true' Wine.
[references: post | page]
The first post has links to:
pet to sfs scripts, menu entry utilities, and Wine usage tips.
----------------------------------------------------------------------------------------------------------
----------------
puppy 431
----------------
I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
mirrors | /distro/4.3__1/puppies-431.1-main-Xserver.iso
mirrors | /distro/4.3__1/devx_430.sfs
This puplet uses glibc 2.6.1
The Wine files listing 'puppy 431' will possibly:
- fail with a glibc before 2.6.1
- succeed with a glibc of 2.6.1 and above
To see what glibc your puppy has.
Code: Select all
ldd --version
Code: Select all
/lib/libc.so.6
Code: Select all
getconf GNU_LIBC_VERSION
also known as dependencies:
[mirrors]
fontconfig/2.7.1/fontconfig-2.7.1-i486-pup4.pet
fontconfig/2.7.1/fontconfig_DEV-2.7.1-i486-pup4.pet
[mirrors]
gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet
[mirrors]
gnutls/3.5.2/gnutls-3.5.2_v1.2.pet
gnutls/3.5.2/gnutls_DEV-3.5.2.pet
[mirrors]
lcms2/2.8/lcms2-2.8_v2.pet
lcms2/2.8/lcms2_DEV-2.8_v2.pet
[mirrors]
libelf/0.8.13/libelf-0.8.13-i486_v2.pet
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet
[mirrors]
libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet
[mirrors]
libgpg-error/1.10/libgpg-error-1.10-i486-431.pet
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet
[mirrors]
libgphoto2/2.5.0/libgphoto2-2.5.0-i486_v2.pet
libgphoto2/2.5.0/libgphoto2_DEV-2.5.0-i486.pet
[mirrors]
libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet
[mirrors]
libusb/1.0.9/libusb-1.0.9-i486_v2.pet
libusb/1.0.9/libusb_DEV-1.0.9-i486_v2.pet
[mirrors]
mpg123/1.25.10/mpg123-1.25.10_v1.1.pet
mpg123/1.25.10/mpg123_DEV-1.25.10.pet
[mirrors]
nettle/3.2/nettle-3.2_v1.2.pet
nettle/3.2/nettle_DEV-3.2_v1.2.pet
[mirrors]
openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet
[mirrors]
openldap/2.4.13/openldap-2.4.13-i486.pet
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet
[mirrors]
prelink/20130503/prelink-20130503-i486_v2.pet
[mirrors]
xorg/7.3/xorg_xorg_full_dri-7.3.pet
xorg/7.3/xorg_xorg_full_dri_DEV-7.3.pet
------------------------------------
When compiling in puppy 431, I used:
v1.1
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x --libdir=/usr/lib32 CFLAGS="-O2 -march=i486 -mtune=i686"
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x --libdir=/usr/lib32 CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline -march=i486 -mtune=i686"
------------
racy 5.5
------------
I compiled using racy 5.5
mirrors | /distro/racy5.5/racy-5.5.iso
mirrors | /distro/racy5.5/devx_racy_5.5.sfs
This puppy distro uses glibc 2.10.1
The Wine files listing 'racy 5.5' will possibly:
- fail with a glibc before 2.10.1
- succeed with a glibc of 2.10.1 and above
To see what glibc your puppy has.
Code: Select all
ldd --version
Code: Select all
/lib/libc.so.6
Code: Select all
getconf GNU_LIBC_VERSION
also known as dependencies:
[mirrors]
fontconfig/2.8.0/fontconfig-2.8.0-w5c.pet
fontconfig/2.8.0/fontconfig_DEV-2.8.0-w5c.pet
[mirrors]
gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet
[mirrors]
gnutls/3.5.2/gnutls-3.5.2_v1.2.pet
gnutls/3.5.2/gnutls_DEV-3.5.2.pet
[mirrors]
lcms2/2.8/lcms2-2.8_v2.pet
lcms2/2.8/lcms2_DEV-2.8_v2.pet
[mirrors]
libelf/0.8.13/libelf-0.8.13-i486_v2.pet
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet
[mirrors]
libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet
[mirrors]
libgpg-error/1.10/libgpg-error-1.10-i486-431.pet
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet
[mirrors]
libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet
[mirrors]
mpg123/1.25.10/mpg123-1.25.10_v1.1.pet
mpg123/1.25.10/mpg123_DEV-1.25.10.pet
[mirrors]
nettle/3.2/nettle-3.2_v1.2.pet
nettle/3.2/nettle_DEV-3.2_v1.2.pet
[mirrors]
openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet
[mirrors]
openldap/2.4.13/openldap-2.4.13-i486.pet
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet
[mirrors]
prelink/20130503/prelink-20130503-i486_v2.pet
----------------------------------------
When compiling in racy 5.5, I used:
v2.1
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x --libdir=/usr/lib32 CFLAGS="-O2 -march=i486 -mtune=i686"
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x --libdir=/usr/lib32 CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline -march=i486 -mtune=i686"
----------------------------
tahrpup 6.0.5 PAE
----------------------------
I compiled using tahrpup 6.0.5 PAE
mirrors | /distro/tahrpup-6.0.5_PAE/tahr-6.0.5_PAE.iso
mirrors | /distro/tahrpup-6.0.5_PAE/devx_tahr_6.0.5.sfs
This puppy distro uses glibc 2.19
The Wine files listing 'tahrpup 6.0.5 PAE' will possibly:
- fail with a glibc before 2.19
- succeed with a glibc of 2.19 and above
To see what glibc your puppy has.
Code: Select all
ldd --version
Code: Select all
/lib/libc.so.6
Code: Select all
getconf GNU_LIBC_VERSION
also known as dependencies:
[mirrors]
mpg123/1.25.10/mpg123-1.25.10_v1.1.pet
mpg123/1.25.10/mpg123_DEV-1.25.10.pet
[mirrors]
openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet
----------------------------------------
When compiling in tahrpup 6.0.5 PAE, I used:
v3.1
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --with-x --libdir=/usr/lib32 CFLAGS="-O2 -march=i486 -mtune=i686"
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --with-x --libdir=/usr/lib32 CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline -march=i486 -mtune=i686"
Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' [post | page] provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.
----------------------------------------------------------------------------------------------------------
updated links at my homepage. see below.
-
- Posts: 503
- Joined: Mon 09 Sep 2013, 00:00
- Location: Florida, USA
- Contact:
Wine64-3.8
This is a WOW64 build.
https://wiki.winehq.org/Building_Wine#Shared_WoW64
[wine-3.8 mirrors]
wine64-3.8_v4.1.pet _________ tahrpup64 6.0.5 [stripped=true]
wine64_DEV-3.8.pet __________ tahrpup64 6.0.5
wine64_DOC-3.8.pet __________ tahrpup64 6.0.5
----------------------------
tahrpup64 6.0.5
----------------------------
I compiled using tahrpup64 6.0.5
This puppy distro uses glibc 2.19
The Wine files listing 'tahrpup64 6.0.5' will possibly:
- fail with a glibc before 2.19
- succeed with a glibc of 2.19 and above
To see what glibc your puppy has.
Code: Select all
ldd --version
Code: Select all
/lib/libc.so.6
Code: Select all
getconf GNU_LIBC_VERSION
When compiling in tahrpup64 6.0.5, I used:
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --with-x --enable-win64 --libdir=/usr/lib64 CFLAGS="-O2"
For the 32-bit wine build, I used files from 'wine-3.8_v3.1.pet' from the previous forum post.
----------------------------------------------------------------------------------------------------------
The 32-bit wineserver is included, just in case it is needed.
It is a hidden file ".wineserver"
I do not have any 64-bit applications to test.
I can only do minimal testing because my AMD graphics driver is not functioning properly.
I may have to learn to compile Mesa to do any more detailed testing of 32-bit applications with this wine build.
I am relying on others to test this wine version.
-
- Posts: 503
- Joined: Mon 09 Sep 2013, 00:00
- Location: Florida, USA
- Contact:
Wine-3.0.1
[wine-3.0.1 mirrors]
wine-3.0.1_v1.1.pet _________ puppy 431 [stripped=true]
wine-3.0.1_v1.2.pet _________ puppy 431 [stripped=false]
wine_DEV-3.0.1_v1.1.pet ____ puppy 431
wine_DEV-3.0.1_v1.2.pet ____ puppy 431
wine-3.0.1_v2.1.pet _________ racy 5.5 [stripped=true]
wine-3.0.1_v2.2.pet _________ racy 5.5 [stripped=false]
wine_DEV-3.0.1_v2.1.pet ____ racy 5.5
wine_DEV-3.0.1_v2.2.pet ____ racy 5.5
wine-3.0.1_v3.1.pet _________ tahrpup 6.0.5 PAE [stripped=true]
wine-3.0.1_v3.2.pet _________ tahrpup 6.0.5 PAE [stripped=false]
wine_DEV-3.0.1_v3.1.pet ____ tahrpup 6.0.5 PAE
wine_DEV-3.0.1_v3.2.pet ____ tahrpup 6.0.5 PAE
wine_DOC-3.0.1.pet
wine_extras-v2.1.pet __________ menu entries | mirrors
md5.txt and hashdeep.txt ____ checksums/hashes | mirrors
----------------------------------------------------------------
Notes for my webpage
http://version2013.yolasite.com/page1.php
The ">" character points to a directory of download links, or an individual download link.
example:
> __ wine/3.0.1/
> _____wine-3.0.1_v1.1.pet
----------------------------------------------------------------
For general use, I recommend packages that are 'stripped=true'.
For submitting bug reports to WineHQ, I recommend packages that are 'stripped=false'.
When submitting bug reports to WineHQ, it appears a 'stripped=false' Wine provides more information than a 'stripped=true' Wine.
[references: post | page]
The first post has links to:
pet to sfs scripts, menu entry utilities, and Wine usage tips.
----------------------------------------------------------------------------------------------------------
----------------
puppy 431
----------------
I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
mirrors | /distro/4.3__1/puppies-431.1-main-Xserver.iso
mirrors | /distro/4.3__1/devx_430.sfs
This puplet uses glibc 2.6.1
The Wine files listing 'puppy 431' will possibly:
- fail with a glibc before 2.6.1
- succeed with a glibc of 2.6.1 and above
To see what glibc your puppy has.
Code: Select all
ldd --version
Code: Select all
/lib/libc.so.6
Code: Select all
getconf GNU_LIBC_VERSION
also known as dependencies:
[mirrors]
fontconfig/2.7.1/fontconfig-2.7.1-i486-pup4.pet
fontconfig/2.7.1/fontconfig_DEV-2.7.1-i486-pup4.pet
[mirrors]
gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet
[mirrors]
gnutls/3.5.2/gnutls-3.5.2_v1.2.pet
gnutls/3.5.2/gnutls_DEV-3.5.2.pet
[mirrors]
lcms2/2.8/lcms2-2.8_v2.pet
lcms2/2.8/lcms2_DEV-2.8_v2.pet
[mirrors]
libelf/0.8.13/libelf-0.8.13-i486_v2.pet
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet
[mirrors]
libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet
[mirrors]
libgpg-error/1.10/libgpg-error-1.10-i486-431.pet
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet
[mirrors]
libgphoto2/2.5.0/libgphoto2-2.5.0-i486_v2.pet
libgphoto2/2.5.0/libgphoto2_DEV-2.5.0-i486.pet
[mirrors]
libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet
[mirrors]
libusb/1.0.9/libusb-1.0.9-i486_v2.pet
libusb/1.0.9/libusb_DEV-1.0.9-i486_v2.pet
[mirrors]
mpg123/1.25.10/mpg123-1.25.10_v1.1.pet
mpg123/1.25.10/mpg123_DEV-1.25.10.pet
[mirrors]
nettle/3.2/nettle-3.2_v1.2.pet
nettle/3.2/nettle_DEV-3.2_v1.2.pet
[mirrors]
openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet
[mirrors]
openldap/2.4.13/openldap-2.4.13-i486.pet
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet
[mirrors]
prelink/20130503/prelink-20130503-i486_v2.pet
[mirrors]
xorg/7.3/xorg_xorg_full_dri-7.3.pet
xorg/7.3/xorg_xorg_full_dri_DEV-7.3.pet
------------------------------------
When compiling in puppy 431, I used:
v1.1
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x --libdir=/usr/lib32 CFLAGS="-O2 -march=i486 -mtune=i686"
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x --libdir=/usr/lib32 CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline -march=i486 -mtune=i686"
------------
racy 5.5
------------
I compiled using racy 5.5
mirrors | /distro/racy5.5/racy-5.5.iso
mirrors | /distro/racy5.5/devx_racy_5.5.sfs
This puppy distro uses glibc 2.10.1
The Wine files listing 'racy 5.5' will possibly:
- fail with a glibc before 2.10.1
- succeed with a glibc of 2.10.1 and above
To see what glibc your puppy has.
Code: Select all
ldd --version
Code: Select all
/lib/libc.so.6
Code: Select all
getconf GNU_LIBC_VERSION
also known as dependencies:
[mirrors]
fontconfig/2.8.0/fontconfig-2.8.0-w5c.pet
fontconfig/2.8.0/fontconfig_DEV-2.8.0-w5c.pet
[mirrors]
gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet
[mirrors]
gnutls/3.5.2/gnutls-3.5.2_v1.2.pet
gnutls/3.5.2/gnutls_DEV-3.5.2.pet
[mirrors]
lcms2/2.8/lcms2-2.8_v2.pet
lcms2/2.8/lcms2_DEV-2.8_v2.pet
[mirrors]
libelf/0.8.13/libelf-0.8.13-i486_v2.pet
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet
[mirrors]
libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet
[mirrors]
libgpg-error/1.10/libgpg-error-1.10-i486-431.pet
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet
[mirrors]
libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet
[mirrors]
mpg123/1.25.10/mpg123-1.25.10_v1.1.pet
mpg123/1.25.10/mpg123_DEV-1.25.10.pet
[mirrors]
nettle/3.2/nettle-3.2_v1.2.pet
nettle/3.2/nettle_DEV-3.2_v1.2.pet
[mirrors]
openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet
[mirrors]
openldap/2.4.13/openldap-2.4.13-i486.pet
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet
[mirrors]
prelink/20130503/prelink-20130503-i486_v2.pet
----------------------------------------
When compiling in racy 5.5, I used:
v2.1
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x --libdir=/usr/lib32 CFLAGS="-O2 -march=i486 -mtune=i686"
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x --libdir=/usr/lib32 CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline -march=i486 -mtune=i686"
----------------------------
tahrpup 6.0.5 PAE
----------------------------
I compiled using tahrpup 6.0.5 PAE
mirrors | /distro/tahrpup-6.0.5_PAE/tahr-6.0.5_PAE.iso
mirrors | /distro/tahrpup-6.0.5_PAE/devx_tahr_6.0.5.sfs
This puppy distro uses glibc 2.19
The Wine files listing 'tahrpup 6.0.5 PAE' will possibly:
- fail with a glibc before 2.19
- succeed with a glibc of 2.19 and above
To see what glibc your puppy has.
Code: Select all
ldd --version
Code: Select all
/lib/libc.so.6
Code: Select all
getconf GNU_LIBC_VERSION
also known as dependencies:
[mirrors]
mpg123/1.25.10/mpg123-1.25.10_v1.1.pet
mpg123/1.25.10/mpg123_DEV-1.25.10.pet
[mirrors]
openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet
----------------------------------------
When compiling in tahrpup 6.0.5 PAE, I used:
v3.1
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --with-x --libdir=/usr/lib32 CFLAGS="-O2 -march=i486 -mtune=i686"
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --with-x --libdir=/usr/lib32 CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline -march=i486 -mtune=i686"
Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' [post | page] provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.
----------------------------------------------------------------------------------------------------------
updated links at my homepage. see below.
-
- Posts: 503
- Joined: Mon 09 Sep 2013, 00:00
- Location: Florida, USA
- Contact:
Wine64-3.0.1
This is a WOW64 build.
https://wiki.winehq.org/Building_Wine#Shared_WoW64
[wine-3.0.1 mirrors]
wine64-3.0.1_v4.1.pet _________ tahrpup64 6.0.5 [stripped=true]
wine64_DEV-3.0.1.pet __________ tahrpup64 6.0.5
wine64_DOC-3.0.1.pet __________ tahrpup64 6.0.5
----------------------------
tahrpup64 6.0.5
----------------------------
I compiled using tahrpup64 6.0.5
This puppy distro uses glibc 2.19
The Wine files listing 'tahrpup64 6.0.5' will possibly:
- fail with a glibc before 2.19
- succeed with a glibc of 2.19 and above
To see what glibc your puppy has.
Code: Select all
ldd --version
Code: Select all
/lib/libc.so.6
Code: Select all
getconf GNU_LIBC_VERSION
When compiling in tahrpup64 6.0.5, I used:
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --with-x --enable-win64 --libdir=/usr/lib64 CFLAGS="-O2"
For the 32-bit wine build, I used files from 'wine-3.0.1_v3.1.pet' from the previous forum post.
----------------------------------------------------------------------------------------------------------
The 32-bit wineserver is included, just in case it is needed.
It is a hidden file ".wineserver"
I do not have any 64-bit applications to test.
I can only do minimal testing because my AMD graphics driver is not functioning properly.
I may have to learn to compile Mesa to do any more detailed testing of 32-bit applications with this wine build.
I am relying on others to test this wine version.
-
- Posts: 503
- Joined: Mon 09 Sep 2013, 00:00
- Location: Florida, USA
- Contact:
Wine-3.9
[wine-3.9 mirrors]
wine-3.9_v1.1.pet _________ puppy 431 [stripped=true]
wine-3.9_v1.2.pet _________ puppy 431 [stripped=false]
wine_DEV-3.9_v1.1.pet ____ puppy 431
wine_DEV-3.9_v1.2.pet ____ puppy 431
wine-3.9_v2.1.pet _________ racy 5.5 [stripped=true]
wine-3.9_v2.2.pet _________ racy 5.5 [stripped=false]
wine_DEV-3.9_v2.1.pet ____ racy 5.5
wine_DEV-3.9_v2.2.pet ____ racy 5.5
wine-3.9_v3.1.pet _________ tahrpup 6.0.5 PAE [stripped=true]
wine-3.9_v3.2.pet _________ tahrpup 6.0.5 PAE [stripped=false]
wine_DEV-3.9_v3.1.pet ____ tahrpup 6.0.5 PAE
wine_DEV-3.9_v3.2.pet ____ tahrpup 6.0.5 PAE
wine_DOC-3.9.pet
wine_extras-v2.1.pet __________ menu entries | mirrors
md5.txt and hashdeep.txt ____ checksums/hashes | mirrors
----------------------------------------------------------------
Notes for my webpage
http://version2013.yolasite.com/page1.php
The ">" character points to a directory of download links, or an individual download link.
example:
> __ wine/3.9/
> _____wine-3.9_v1.1.pet
----------------------------------------------------------------
For general use, I recommend packages that are 'stripped=true'.
For submitting bug reports to WineHQ, I recommend packages that are 'stripped=false'.
When submitting bug reports to WineHQ, it appears a 'stripped=false' Wine provides more information than a 'stripped=true' Wine.
[references: post | page]
The first post has links to:
pet to sfs scripts, menu entry utilities, and Wine usage tips.
----------------------------------------------------------------------------------------------------------
----------------
puppy 431
----------------
I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
mirrors | /distro/4.3__1/puppies-431.1-main-Xserver.iso
mirrors | /distro/4.3__1/devx_430.sfs
This puplet uses glibc 2.6.1
The Wine files listing 'puppy 431' will possibly:
- fail with a glibc before 2.6.1
- succeed with a glibc of 2.6.1 and above
To see what glibc your puppy has.
Code: Select all
ldd --version
Code: Select all
/lib/libc.so.6
Code: Select all
getconf GNU_LIBC_VERSION
also known as dependencies:
[mirrors]
fontconfig/2.7.1/fontconfig-2.7.1-i486-pup4.pet
fontconfig/2.7.1/fontconfig_DEV-2.7.1-i486-pup4.pet
[mirrors]
gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet
[mirrors]
gnutls/3.5.2/gnutls-3.5.2_v1.2.pet
gnutls/3.5.2/gnutls_DEV-3.5.2.pet
[mirrors]
lcms2/2.8/lcms2-2.8_v2.pet
lcms2/2.8/lcms2_DEV-2.8_v2.pet
[mirrors]
libelf/0.8.13/libelf-0.8.13-i486_v2.pet
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet
[mirrors]
libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet
[mirrors]
libgpg-error/1.10/libgpg-error-1.10-i486-431.pet
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet
[mirrors]
libgphoto2/2.5.0/libgphoto2-2.5.0-i486_v2.pet
libgphoto2/2.5.0/libgphoto2_DEV-2.5.0-i486.pet
[mirrors]
libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet
[mirrors]
libusb/1.0.9/libusb-1.0.9-i486_v2.pet
libusb/1.0.9/libusb_DEV-1.0.9-i486_v2.pet
[mirrors]
mpg123/1.25.10/mpg123-1.25.10_v1.1.pet
mpg123/1.25.10/mpg123_DEV-1.25.10.pet
[mirrors]
nettle/3.2/nettle-3.2_v1.2.pet
nettle/3.2/nettle_DEV-3.2_v1.2.pet
[mirrors]
openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet
[mirrors]
openldap/2.4.13/openldap-2.4.13-i486.pet
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet
[mirrors]
prelink/20130503/prelink-20130503-i486_v2.pet
[mirrors]
xorg/7.3/xorg_xorg_full_dri-7.3.pet
xorg/7.3/xorg_xorg_full_dri_DEV-7.3.pet
------------------------------------
When compiling in puppy 431, I used:
v1.1
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x --libdir=/usr/lib32 CFLAGS="-O2 -march=i486 -mtune=i686"
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x --libdir=/usr/lib32 CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline -march=i486 -mtune=i686"
------------
racy 5.5
------------
I compiled using racy 5.5
mirrors | /distro/racy5.5/racy-5.5.iso
mirrors | /distro/racy5.5/devx_racy_5.5.sfs
This puppy distro uses glibc 2.10.1
The Wine files listing 'racy 5.5' will possibly:
- fail with a glibc before 2.10.1
- succeed with a glibc of 2.10.1 and above
To see what glibc your puppy has.
Code: Select all
ldd --version
Code: Select all
/lib/libc.so.6
Code: Select all
getconf GNU_LIBC_VERSION
also known as dependencies:
[mirrors]
fontconfig/2.8.0/fontconfig-2.8.0-w5c.pet
fontconfig/2.8.0/fontconfig_DEV-2.8.0-w5c.pet
[mirrors]
gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet
[mirrors]
gnutls/3.5.2/gnutls-3.5.2_v1.2.pet
gnutls/3.5.2/gnutls_DEV-3.5.2.pet
[mirrors]
lcms2/2.8/lcms2-2.8_v2.pet
lcms2/2.8/lcms2_DEV-2.8_v2.pet
[mirrors]
libelf/0.8.13/libelf-0.8.13-i486_v2.pet
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet
[mirrors]
libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet
[mirrors]
libgpg-error/1.10/libgpg-error-1.10-i486-431.pet
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet
[mirrors]
libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet
[mirrors]
mpg123/1.25.10/mpg123-1.25.10_v1.1.pet
mpg123/1.25.10/mpg123_DEV-1.25.10.pet
[mirrors]
nettle/3.2/nettle-3.2_v1.2.pet
nettle/3.2/nettle_DEV-3.2_v1.2.pet
[mirrors]
openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet
[mirrors]
openldap/2.4.13/openldap-2.4.13-i486.pet
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet
[mirrors]
prelink/20130503/prelink-20130503-i486_v2.pet
----------------------------------------
When compiling in racy 5.5, I used:
v2.1
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x --libdir=/usr/lib32 CFLAGS="-O2 -march=i486 -mtune=i686"
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x --libdir=/usr/lib32 CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline -march=i486 -mtune=i686"
----------------------------
tahrpup 6.0.5 PAE
----------------------------
I compiled using tahrpup 6.0.5 PAE
mirrors | /distro/tahrpup-6.0.5_PAE/tahr-6.0.5_PAE.iso
mirrors | /distro/tahrpup-6.0.5_PAE/devx_tahr_6.0.5.sfs
This puppy distro uses glibc 2.19
The Wine files listing 'tahrpup 6.0.5 PAE' will possibly:
- fail with a glibc before 2.19
- succeed with a glibc of 2.19 and above
To see what glibc your puppy has.
Code: Select all
ldd --version
Code: Select all
/lib/libc.so.6
Code: Select all
getconf GNU_LIBC_VERSION
also known as dependencies:
[mirrors]
mpg123/1.25.10/mpg123-1.25.10_v1.1.pet
mpg123/1.25.10/mpg123_DEV-1.25.10.pet
[mirrors]
openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet
----------------------------------------
When compiling in tahrpup 6.0.5 PAE, I used:
v3.1
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --with-x --libdir=/usr/lib32 CFLAGS="-O2 -march=i486 -mtune=i686"
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --with-x --libdir=/usr/lib32 CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline -march=i486 -mtune=i686"
Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' [post | page] provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.
----------------------------------------------------------------------------------------------------------
updated links at my homepage. see below.
-
- Posts: 503
- Joined: Mon 09 Sep 2013, 00:00
- Location: Florida, USA
- Contact:
Wine64-3.9
This is a WOW64 build.
https://wiki.winehq.org/Building_Wine#Shared_WoW64
[wine-3.9 mirrors]
wine64-3.9_v4.1.pet _________ tahrpup64 6.0.5 [stripped=true]
wine64_DEV-3.9.pet __________ tahrpup64 6.0.5
wine64_DOC-3.9.pet __________ tahrpup64 6.0.5
----------------------------
tahrpup64 6.0.5
----------------------------
I compiled using tahrpup64 6.0.5
This puppy distro uses glibc 2.19
The Wine files listing 'tahrpup64 6.0.5' will possibly:
- fail with a glibc before 2.19
- succeed with a glibc of 2.19 and above
To see what glibc your puppy has.
Code: Select all
ldd --version
Code: Select all
/lib/libc.so.6
Code: Select all
getconf GNU_LIBC_VERSION
When compiling in tahrpup64 6.0.5, I used:
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --with-x --enable-win64 --libdir=/usr/lib64 CFLAGS="-O2"
For the 32-bit wine build, I used files from 'wine-3.9_v3.1.pet' from the previous forum post.
----------------------------------------------------------------------------------------------------------
The 32-bit wineserver is included, just in case it is needed.
It is a hidden file ".wineserver"
I do not have any 64-bit applications to test.
I can only do minimal testing because my AMD graphics driver is not functioning properly.
I may have to learn to compile Mesa to do any more detailed testing of 32-bit applications with this wine build.
I am relying on others to test this wine version.
-
- Posts: 503
- Joined: Mon 09 Sep 2013, 00:00
- Location: Florida, USA
- Contact:
Wine-3.10
[wine-3.10 mirrors]
wine fails to compile in puppy431 and racy5.5
https://bugs.winehq.org/show_bug.cgi?id=44052
wine-3.10_v3.1.pet _________ tahrpup 6.0.5 PAE [stripped=true]
wine-3.10_v3.2.pet _________ tahrpup 6.0.5 PAE [stripped=false]
wine_DEV-3.10_v3.1.pet ____ tahrpup 6.0.5 PAE
wine_DEV-3.10_v3.2.pet ____ tahrpup 6.0.5 PAE
wine_DOC-3.10.pet
wine_extras-v2.1.pet __________ menu entries | mirrors
md5.txt and hashdeep.txt ____ checksums/hashes | mirrors
----------------------------------------------------------------
Notes for my webpage
http://version2013.yolasite.com/page1.php
The ">" character points to a directory of download links, or an individual download link.
example:
> __ wine/3.10/
> _____wine-3.10_v1.1.pet
----------------------------------------------------------------
For general use, I recommend packages that are 'stripped=true'.
For submitting bug reports to WineHQ, I recommend packages that are 'stripped=false'.
When submitting bug reports to WineHQ, it appears a 'stripped=false' Wine provides more information than a 'stripped=true' Wine.
[references: post | page]
The first post has links to:
pet to sfs scripts, menu entry utilities, and Wine usage tips.
----------------------------------------------------------------------------------------------------------
----------------------------
tahrpup 6.0.5 PAE
----------------------------
I compiled using tahrpup 6.0.5 PAE
mirrors | /distro/tahrpup-6.0.5_PAE/tahr-6.0.5_PAE.iso
mirrors | /distro/tahrpup-6.0.5_PAE/devx_tahr_6.0.5.sfs
This puppy distro uses glibc 2.19
The Wine files listing 'tahrpup 6.0.5 PAE' will possibly:
- fail with a glibc before 2.19
- succeed with a glibc of 2.19 and above
To see what glibc your puppy has.
Code: Select all
ldd --version
Code: Select all
/lib/libc.so.6
Code: Select all
getconf GNU_LIBC_VERSION
also known as dependencies:
[mirrors]
mpg123/1.25.10/mpg123-1.25.10_v1.1.pet
mpg123/1.25.10/mpg123_DEV-1.25.10.pet
[mirrors]
openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet
----------------------------------------
When compiling in tahrpup 6.0.5 PAE, I used:
v3.1
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --with-x --libdir=/usr/lib32 CFLAGS="-O2 -march=i486 -mtune=i686"
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --with-x --libdir=/usr/lib32 CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline -march=i486 -mtune=i686"
Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' [post | page] provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.
----------------------------------------------------------------------------------------------------------
updated links at my homepage. see below.
-
- Posts: 503
- Joined: Mon 09 Sep 2013, 00:00
- Location: Florida, USA
- Contact:
Wine64-3.10
This is a WOW64 build.
https://wiki.winehq.org/Building_Wine#Shared_WoW64
[wine-3.10 mirrors]
wine64-3.10_v4.1.pet _________ tahrpup64 6.0.5 [stripped=true]
wine64_DEV-3.10.pet __________ tahrpup64 6.0.5
wine64_DOC-3.10.pet __________ tahrpup64 6.0.5
----------------------------
tahrpup64 6.0.5
----------------------------
I compiled using tahrpup64 6.0.5
This puppy distro uses glibc 2.19
The Wine files listing 'tahrpup64 6.0.5' will possibly:
- fail with a glibc before 2.19
- succeed with a glibc of 2.19 and above
To see what glibc your puppy has.
Code: Select all
ldd --version
Code: Select all
/lib/libc.so.6
Code: Select all
getconf GNU_LIBC_VERSION
When compiling in tahrpup64 6.0.5, I used:
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --with-x --enable-win64 --libdir=/usr/lib64 CFLAGS="-O2"
For the 32-bit wine build, I used files from 'wine-3.10_v3.1.pet' from the previous forum post.
----------------------------------------------------------------------------------------------------------
The 32-bit wineserver is included, just in case it is needed.
It is a hidden file ".wineserver"
I do not have any 64-bit applications to test.
I can only do minimal testing because my AMD graphics driver is not functioning properly.
I may have to learn to compile Mesa to do any more detailed testing of 32-bit applications with this wine build.
I am relying on others to test this wine version.
-
- Posts: 503
- Joined: Mon 09 Sep 2013, 00:00
- Location: Florida, USA
- Contact:
Wine-3.11
[wine-3.11 mirrors]
wine fails to compile in puppy431 and racy5.5
https://bugs.winehq.org/show_bug.cgi?id=45370
https://bugs.winehq.org/show_bug.cgi?id=44052
wine-3.11_v3.1.pet _________ tahrpup 6.0.5 PAE [stripped=true]
wine-3.11_v3.2.pet _________ tahrpup 6.0.5 PAE [stripped=false]
wine_DEV-3.11_v3.1.pet ____ tahrpup 6.0.5 PAE
wine_DEV-3.11_v3.2.pet ____ tahrpup 6.0.5 PAE
wine_DOC-3.11.pet
wine_extras-v2.1.pet __________ menu entries | mirrors
md5.txt and hashdeep.txt ____ checksums/hashes | mirrors
----------------------------------------------------------------
Notes for my webpage
http://version2013.yolasite.com/page1.php
The ">" character points to a directory of download links, or an individual download link.
example:
> __ wine/3.11/
> _____wine-3.11_v1.1.pet
----------------------------------------------------------------
For general use, I recommend packages that are 'stripped=true'.
For submitting bug reports to WineHQ, I recommend packages that are 'stripped=false'.
When submitting bug reports to WineHQ, it appears a 'stripped=false' Wine provides more information than a 'stripped=true' Wine.
[references: post | page]
The first post has links to:
pet to sfs scripts, menu entry utilities, and Wine usage tips.
----------------------------------------------------------------------------------------------------------
----------------------------
tahrpup 6.0.5 PAE
----------------------------
I compiled using tahrpup 6.0.5 PAE
mirrors | /distro/tahrpup-6.0.5_PAE/tahr-6.0.5_PAE.iso
mirrors | /distro/tahrpup-6.0.5_PAE/devx_tahr_6.0.5.sfs
This puppy distro uses glibc 2.19
The Wine files listing 'tahrpup 6.0.5 PAE' will possibly:
- fail with a glibc before 2.19
- succeed with a glibc of 2.19 and above
To see what glibc your puppy has.
Code: Select all
ldd --version
Code: Select all
/lib/libc.so.6
Code: Select all
getconf GNU_LIBC_VERSION
also known as dependencies:
[mirrors]
mpg123/1.25.10/mpg123-1.25.10_v1.1.pet
mpg123/1.25.10/mpg123_DEV-1.25.10.pet
[mirrors]
openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet
----------------------------------------
When compiling in tahrpup 6.0.5 PAE, I used:
v3.1
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --with-x --libdir=/usr/lib32 CFLAGS="-O2 -march=i486 -mtune=i686"
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --with-x --libdir=/usr/lib32 CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline -march=i486 -mtune=i686"
Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' [post | page] provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.
----------------------------------------------------------------------------------------------------------
updated links at my homepage. see below.
-
- Posts: 503
- Joined: Mon 09 Sep 2013, 00:00
- Location: Florida, USA
- Contact:
Wine64-3.11
This is a WOW64 build.
https://wiki.winehq.org/Building_Wine#Shared_WoW64
[wine-3.11 mirrors]
wine64-3.11_v4.1.pet _________ tahrpup64 6.0.5 [stripped=true]
wine64_DEV-3.11.pet __________ tahrpup64 6.0.5
wine64_DOC-3.11.pet __________ tahrpup64 6.0.5
----------------------------
tahrpup64 6.0.5
----------------------------
I compiled using tahrpup64 6.0.5
This puppy distro uses glibc 2.19
The Wine files listing 'tahrpup64 6.0.5' will possibly:
- fail with a glibc before 2.19
- succeed with a glibc of 2.19 and above
To see what glibc your puppy has.
Code: Select all
ldd --version
Code: Select all
/lib/libc.so.6
Code: Select all
getconf GNU_LIBC_VERSION
When compiling in tahrpup64 6.0.5, I used:
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --with-x --enable-win64 --libdir=/usr/lib64 CFLAGS="-O2"
For the 32-bit wine build, I used files from 'wine-3.11_v3.1.pet' from the previous forum post.
----------------------------------------------------------------------------------------------------------
The 32-bit wineserver is included, just in case it is needed.
It is a hidden file ".wineserver"
I do not have any 64-bit applications to test.
I can only do minimal testing because my AMD graphics driver is not functioning properly.
I may have to learn to compile Mesa to do any more detailed testing of 32-bit applications with this wine build.
I am relying on others to test this wine version.
Code: Select all
# winecfg
000f:err:service:process_send_command receiving command result timed out
000f:fixme:service:scmdatabase_autostart_services Auto-start service L"WineBus" failed to start: 1053
0017:err:service:process_send_command receiving command result timed out
002b:err:plugplay:handle_bus_relations Failed to load driver L"WineHID"
0026:fixme:ntdll:RtlNtStatusToDosErrorNoTeb no mapping for 0000041d
0017:err:service:process_send_command receiving command result timed out
002b:err:plugplay:handle_bus_relations Failed to load driver L"WineHID"
-
- Posts: 503
- Joined: Mon 09 Sep 2013, 00:00
- Location: Florida, USA
- Contact:
--------------------------------------------------------------------------Smithy wrote:Not sure if the pm got to you version 2013, but I am noticing these errors on wine 3.11, 32 bit with 10 secs lag.
Code: Select all
# winecfg 000f:err:service:process_send_command receiving command result timed out 000f:fixme:service:scmdatabase_autostart_services Auto-start service L"WineBus" failed to start: 1053 0017:err:service:process_send_command receiving command result timed out 002b:err:plugplay:handle_bus_relations Failed to load driver L"WineHID" 0026:fixme:ntdll:RtlNtStatusToDosErrorNoTeb no mapping for 0000041d 0017:err:service:process_send_command receiving command result timed out 002b:err:plugplay:handle_bus_relations Failed to load driver L"WineHID"
EDIT:
another relevant bug report
https://bugs.winehq.org/show_bug.cgi?id=45084
--------------------------------------------------------------------------
https://bugs.winehq.org/show_bug.cgi?id=44946#c7
I recommend making a backup in case editing the registry borks your install.
With minimal testing, this appears to speed things up.
Since I am unfamiliar with many internal workings of wine, the side effects of this registry edit are unknown to me.
Code: Select all
wine regedit
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\WineHID
Right-click on WineHID > Export
With this method, you can import this registry key; in case deleting it turns out to be undesirable.
-
- Posts: 503
- Joined: Mon 09 Sep 2013, 00:00
- Location: Florida, USA
- Contact:
Wine-3.0.2
[wine-3.0.2 mirrors]
wine-3.0.2_v1.1.pet _________ puppy 431 [stripped=true]
wine-3.0.2_v1.2.pet _________ puppy 431 [stripped=false]
wine_DEV-3.0.2_v1.1.pet ____ puppy 431
wine_DEV-3.0.2_v1.2.pet ____ puppy 431
wine-3.0.2_v2.1.pet _________ racy 5.5 [stripped=true]
wine-3.0.2_v2.2.pet _________ racy 5.5 [stripped=false]
wine_DEV-3.0.2_v2.1.pet ____ racy 5.5
wine_DEV-3.0.2_v2.2.pet ____ racy 5.5
wine-3.0.2_v3.1.pet _________ tahrpup 6.0.5 PAE [stripped=true]
wine-3.0.2_v3.2.pet _________ tahrpup 6.0.5 PAE [stripped=false]
wine_DEV-3.0.2_v3.1.pet ____ tahrpup 6.0.5 PAE
wine_DEV-3.0.2_v3.2.pet ____ tahrpup 6.0.5 PAE
wine_DOC-3.0.2.pet
wine_extras-v2.1.pet __________ menu entries | mirrors
md5.txt and hashdeep.txt ____ checksums/hashes | mirrors
----------------------------------------------------------------
Notes for my webpage
http://version2013.yolasite.com/page1.php
The ">" character points to a directory of download links, or an individual download link.
example:
> __ wine/3.0.2/
> _____wine-3.0.2_v1.1.pet
----------------------------------------------------------------
For general use, I recommend packages that are 'stripped=true'.
For submitting bug reports to WineHQ, I recommend packages that are 'stripped=false'.
When submitting bug reports to WineHQ, it appears a 'stripped=false' Wine provides more information than a 'stripped=true' Wine.
[references: post | page]
The first post has links to:
pet to sfs scripts, menu entry utilities, and Wine usage tips.
----------------------------------------------------------------------------------------------------------
----------------
puppy 431
----------------
I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
mirrors | /distro/4.3__1/puppies-431.1-main-Xserver.iso
mirrors | /distro/4.3__1/devx_430.sfs
This puplet uses glibc 2.6.1
The Wine files listing 'puppy 431' will possibly:
- fail with a glibc before 2.6.1
- succeed with a glibc of 2.6.1 and above
To see what glibc your puppy has.
Code: Select all
ldd --version
Code: Select all
/lib/libc.so.6
Code: Select all
getconf GNU_LIBC_VERSION
also known as dependencies:
[mirrors]
fontconfig/2.7.1/fontconfig-2.7.1-i486-pup4.pet
fontconfig/2.7.1/fontconfig_DEV-2.7.1-i486-pup4.pet
[mirrors]
gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet
[mirrors]
gnutls/3.5.2/gnutls-3.5.2_v1.2.pet
gnutls/3.5.2/gnutls_DEV-3.5.2.pet
[mirrors]
lcms2/2.8/lcms2-2.8_v2.pet
lcms2/2.8/lcms2_DEV-2.8_v2.pet
[mirrors]
libelf/0.8.13/libelf-0.8.13-i486_v2.pet
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet
[mirrors]
libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet
[mirrors]
libgpg-error/1.10/libgpg-error-1.10-i486-431.pet
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet
[mirrors]
libgphoto2/2.5.0/libgphoto2-2.5.0-i486_v2.pet
libgphoto2/2.5.0/libgphoto2_DEV-2.5.0-i486.pet
[mirrors]
libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet
[mirrors]
libusb/1.0.9/libusb-1.0.9-i486_v2.pet
libusb/1.0.9/libusb_DEV-1.0.9-i486_v2.pet
[mirrors]
mpg123/1.25.10/mpg123-1.25.10_v1.1.pet
mpg123/1.25.10/mpg123_DEV-1.25.10.pet
[mirrors]
nettle/3.2/nettle-3.2_v1.2.pet
nettle/3.2/nettle_DEV-3.2_v1.2.pet
[mirrors]
openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet
[mirrors]
openldap/2.4.13/openldap-2.4.13-i486.pet
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet
[mirrors]
prelink/20130503/prelink-20130503-i486_v2.pet
[mirrors]
xorg/7.3/xorg_xorg_full_dri-7.3.pet
xorg/7.3/xorg_xorg_full_dri_DEV-7.3.pet
------------------------------------
When compiling in puppy 431, I used:
v1.1
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x --libdir=/usr/lib32 CFLAGS="-O2 -march=i486 -mtune=i686"
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x --libdir=/usr/lib32 CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline -march=i486 -mtune=i686"
------------
racy 5.5
------------
I compiled using racy 5.5
mirrors | /distro/racy5.5/racy-5.5.iso
mirrors | /distro/racy5.5/devx_racy_5.5.sfs
This puppy distro uses glibc 2.10.1
The Wine files listing 'racy 5.5' will possibly:
- fail with a glibc before 2.10.1
- succeed with a glibc of 2.10.1 and above
To see what glibc your puppy has.
Code: Select all
ldd --version
Code: Select all
/lib/libc.so.6
Code: Select all
getconf GNU_LIBC_VERSION
also known as dependencies:
[mirrors]
fontconfig/2.8.0/fontconfig-2.8.0-w5c.pet
fontconfig/2.8.0/fontconfig_DEV-2.8.0-w5c.pet
[mirrors]
gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet
[mirrors]
gnutls/3.5.2/gnutls-3.5.2_v1.2.pet
gnutls/3.5.2/gnutls_DEV-3.5.2.pet
[mirrors]
lcms2/2.8/lcms2-2.8_v2.pet
lcms2/2.8/lcms2_DEV-2.8_v2.pet
[mirrors]
libelf/0.8.13/libelf-0.8.13-i486_v2.pet
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet
[mirrors]
libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet
[mirrors]
libgpg-error/1.10/libgpg-error-1.10-i486-431.pet
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet
[mirrors]
libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet
[mirrors]
mpg123/1.25.10/mpg123-1.25.10_v1.1.pet
mpg123/1.25.10/mpg123_DEV-1.25.10.pet
[mirrors]
nettle/3.2/nettle-3.2_v1.2.pet
nettle/3.2/nettle_DEV-3.2_v1.2.pet
[mirrors]
openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet
[mirrors]
openldap/2.4.13/openldap-2.4.13-i486.pet
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet
[mirrors]
prelink/20130503/prelink-20130503-i486_v2.pet
----------------------------------------
When compiling in racy 5.5, I used:
v2.1
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x --libdir=/usr/lib32 CFLAGS="-O2 -march=i486 -mtune=i686"
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x --libdir=/usr/lib32 CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline -march=i486 -mtune=i686"
----------------------------
tahrpup 6.0.5 PAE
----------------------------
I compiled using tahrpup 6.0.5 PAE
mirrors | /distro/tahrpup-6.0.5_PAE/tahr-6.0.5_PAE.iso
mirrors | /distro/tahrpup-6.0.5_PAE/devx_tahr_6.0.5.sfs
This puppy distro uses glibc 2.19
The Wine files listing 'tahrpup 6.0.5 PAE' will possibly:
- fail with a glibc before 2.19
- succeed with a glibc of 2.19 and above
To see what glibc your puppy has.
Code: Select all
ldd --version
Code: Select all
/lib/libc.so.6
Code: Select all
getconf GNU_LIBC_VERSION
also known as dependencies:
[mirrors]
mpg123/1.25.10/mpg123-1.25.10_v1.1.pet
mpg123/1.25.10/mpg123_DEV-1.25.10.pet
[mirrors]
openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet
----------------------------------------
When compiling in tahrpup 6.0.5 PAE, I used:
v3.1
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --with-x --libdir=/usr/lib32 CFLAGS="-O2 -march=i486 -mtune=i686"
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --with-x --libdir=/usr/lib32 CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline -march=i486 -mtune=i686"
Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' [post | page] provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.
----------------------------------------------------------------------------------------------------------
updated links at my homepage. see below.
-
- Posts: 503
- Joined: Mon 09 Sep 2013, 00:00
- Location: Florida, USA
- Contact:
Wine64-3.0.2
This is a WOW64 build.
https://wiki.winehq.org/Building_Wine#Shared_WoW64
[wine-3.0.2 mirrors]
wine64-3.0.2_v4.1.pet _________ tahrpup64 6.0.5 [stripped=true]
wine64_DEV-3.0.2.pet __________ tahrpup64 6.0.5
wine64_DOC-3.0.2.pet __________ tahrpup64 6.0.5
----------------------------
tahrpup64 6.0.5
----------------------------
I compiled using tahrpup64 6.0.5
This puppy distro uses glibc 2.19
The Wine files listing 'tahrpup64 6.0.5' will possibly:
- fail with a glibc before 2.19
- succeed with a glibc of 2.19 and above
To see what glibc your puppy has.
Code: Select all
ldd --version
Code: Select all
/lib/libc.so.6
Code: Select all
getconf GNU_LIBC_VERSION
When compiling in tahrpup64 6.0.5, I used:
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --with-x --enable-win64 --libdir=/usr/lib64 CFLAGS="-O2"
For the 32-bit wine build, I used files from 'wine-3.0.2_v3.1.pet' from the previous forum post.
----------------------------------------------------------------------------------------------------------
The 32-bit wineserver is included, just in case it is needed.
It is a hidden file ".wineserver"
I do not have any 64-bit applications to test.
I can only do minimal testing because my AMD graphics driver is not functioning properly.
I may have to learn to compile Mesa to do any more detailed testing of 32-bit applications with this wine build.
I am relying on others to test this wine version.
-
- Posts: 503
- Joined: Mon 09 Sep 2013, 00:00
- Location: Florida, USA
- Contact:
Wine-3.12
[wine-3.12 mirrors]
wine fails to compile in puppy431 and racy5.5
https://bugs.winehq.org/show_bug.cgi?id=45370
wine-3.12_v3.1.pet _________ tahrpup 6.0.5 PAE [stripped=true]
wine-3.12_v3.2.pet _________ tahrpup 6.0.5 PAE [stripped=false]
wine_DEV-3.12_v3.1.pet ____ tahrpup 6.0.5 PAE
wine_DEV-3.12_v3.2.pet ____ tahrpup 6.0.5 PAE
wine_DOC-3.12.pet
wine_extras-v2.1.pet __________ menu entries | mirrors
md5.txt and hashdeep.txt ____ checksums/hashes | mirrors
----------------------------------------------------------------
Notes for my webpage
http://version2013.yolasite.com/page1.php
The ">" character points to a directory of download links, or an individual download link.
example:
> __ wine/3.12/
> _____wine-3.12_v1.1.pet
----------------------------------------------------------------
For general use, I recommend packages that are 'stripped=true'.
For submitting bug reports to WineHQ, I recommend packages that are 'stripped=false'.
When submitting bug reports to WineHQ, it appears a 'stripped=false' Wine provides more information than a 'stripped=true' Wine.
[references: post | page]
The first post has links to:
pet to sfs scripts, menu entry utilities, and Wine usage tips.
----------------------------------------------------------------------------------------------------------
----------------------------
tahrpup 6.0.5 PAE
----------------------------
I compiled using tahrpup 6.0.5 PAE
mirrors | /distro/tahrpup-6.0.5_PAE/tahr-6.0.5_PAE.iso
mirrors | /distro/tahrpup-6.0.5_PAE/devx_tahr_6.0.5.sfs
This puppy distro uses glibc 2.19
The Wine files listing 'tahrpup 6.0.5 PAE' will possibly:
- fail with a glibc before 2.19
- succeed with a glibc of 2.19 and above
To see what glibc your puppy has.
Code: Select all
ldd --version
Code: Select all
/lib/libc.so.6
Code: Select all
getconf GNU_LIBC_VERSION
also known as dependencies:
[mirrors]
mpg123/1.25.10/mpg123-1.25.10_v1.1.pet
mpg123/1.25.10/mpg123_DEV-1.25.10.pet
[mirrors]
openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet
----------------------------------------
When compiling in tahrpup 6.0.5 PAE, I used:
v3.1
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --with-x --libdir=/usr/lib32 CFLAGS="-O2 -march=i486 -mtune=i686"
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --with-x --libdir=/usr/lib32 CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline -march=i486 -mtune=i686"
Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' [post | page] provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.
----------------------------------------------------------------------------------------------------------
updated links at my homepage. see below.
-
- Posts: 503
- Joined: Mon 09 Sep 2013, 00:00
- Location: Florida, USA
- Contact:
Wine64-3.12
This is a WOW64 build.
https://wiki.winehq.org/Building_Wine#Shared_WoW64
[wine-3.12 mirrors]
wine64-3.12_v4.1.pet _________ tahrpup64 6.0.5 [stripped=true]
wine64_DEV-3.12.pet __________ tahrpup64 6.0.5
wine64_DOC-3.12.pet __________ tahrpup64 6.0.5
----------------------------
tahrpup64 6.0.5
----------------------------
I compiled using tahrpup64 6.0.5
This puppy distro uses glibc 2.19
The Wine files listing 'tahrpup64 6.0.5' will possibly:
- fail with a glibc before 2.19
- succeed with a glibc of 2.19 and above
To see what glibc your puppy has.
Code: Select all
ldd --version
Code: Select all
/lib/libc.so.6
Code: Select all
getconf GNU_LIBC_VERSION
When compiling in tahrpup64 6.0.5, I used:
Code: Select all
configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --with-x --enable-win64 --libdir=/usr/lib64 CFLAGS="-O2"
For the 32-bit wine build, I used files from 'wine-3.12_v3.1.pet' from the previous forum post.
----------------------------------------------------------------------------------------------------------
The 32-bit wineserver is included, just in case it is needed.
It is a hidden file ".wineserver"
I do not have any 64-bit applications to test.
I can only do minimal testing because my AMD graphics driver is not functioning properly.
I may have to learn to compile Mesa to do any more detailed testing of 32-bit applications with this wine build.
I am relying on others to test this wine version.
-
- Posts: 503
- Joined: Mon 09 Sep 2013, 00:00
- Location: Florida, USA
- Contact:
compile script
https://version2013.yolasite.com/page10