[FINISHED] CompizPup - an experiment
Updated setup pet for LxPup14.02
Updated to revert to LxPanelx-r606
Download the setup pet for use with LxPup14.02 (Slacko 'flavour' only)
Suggest - preferably start again with a clean savefile if frugal install or uninstall the previous setup pet before installing this one. Reboot after installation.
Download the setup pet for use with LxPup14.02 (Slacko 'flavour' only)
Suggest - preferably start again with a clean savefile if frugal install or uninstall the previous setup pet before installing this one. Reboot after installation.
Last edited by peebee on Wed 26 Feb 2014, 19:15, edited 2 times in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
re: Updated setup pet for LxPup14.02
Thanks peebee for that
still having issues with icons in the app launcher of lxpanel appearing as default icons after reboot with message "file not found"
i think its related to changing theme etc
another question (off topic sorry)
regarding compiz, I like to set up a hot corner or button to view all windows
I only see option of "expose" that shows workspace overview which I dont use
oh also, any pet to tie my hardware volume control into alsa?
thanks thanks
thanks again
still having issues with icons in the app launcher of lxpanel appearing as default icons after reboot with message "file not found"
i think its related to changing theme etc
another question (off topic sorry)
regarding compiz, I like to set up a hot corner or button to view all windows
I only see option of "expose" that shows workspace overview which I dont use
oh also, any pet to tie my hardware volume control into alsa?
thanks thanks
thanks again
re: Updated setup pet for LxPup14.02
update
still having issue post revert to LxPanelx-r606
panels disappeared.
I rebooted without saving and all was well
but my system tray is now MIA
still having issue post revert to LxPanelx-r606
panels disappeared.
I rebooted without saving and all was well
but my system tray is now MIA
Re: re: Updated setup pet for LxPup14.02
Hi wraycwrayc wrote:update - still having issue
Really sorry to hear that you are having problems....
I'm at a bit of a loss to suggest what you could do as I don't really understand your setup or what you are trying to do with Compiz - I'm not a Compiz user myself so I'm not the best person to advise when it comes to Compiz configuration and use.
I think the best I can suggest is that you start again with a clean system and download the previous version of LxPup (13.11) from:
http://sourceforge.net/projects/lxpup/files/LxPup13.11/
choosing either the s-4g or the s-pae flavours...
then add Compiz as per:
http://murga-linux.com/puppy/viewtopic. ... 463#730463
reboot and make a clean savefile and then see how you get on with that.
Quite a lot of things have changed between 13.11 and the pre-release 14.02 that you are using and it may be that something else besides the LxPanel-r694 change is affecting Compiz...
Hope this helps
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Something else to try....
I think that maybe LxPanel plays better with Compiz than LxPanelX.
This pet:
http://sourceforge.net/projects/lxpup/f ... t/download
converts LxPup14.02 to LxPanel
It should be installed after the Compiz sfs has been installed but before this setup pet is installed:
http://sourceforge.net/projects/lxpup/f ... t/download
Cheers
peebee
I think that maybe LxPanel plays better with Compiz than LxPanelX.
This pet:
http://sourceforge.net/projects/lxpup/f ... t/download
converts LxPup14.02 to LxPanel
It should be installed after the Compiz sfs has been installed but before this setup pet is installed:
http://sourceforge.net/projects/lxpup/f ... t/download
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
thanks so much peebee for the suggestions
ok, I reverted back to my previously saved SFS file with only couple minor personalizations, like internet connection, chrome installed etc.
I have a feeling the issues have something to do with "theme" changes, that the save file gets corrupted., hence; "file not found" message and icons missing etc
so far, not changing the theme seems to solve the issue
but, I will attempt again, a I already have the sfs file backed up
regards
wrayc
ok, I reverted back to my previously saved SFS file with only couple minor personalizations, like internet connection, chrome installed etc.
I have a feeling the issues have something to do with "theme" changes, that the save file gets corrupted., hence; "file not found" message and icons missing etc
so far, not changing the theme seems to solve the issue
but, I will attempt again, a I already have the sfs file backed up
regards
wrayc
ok peebee
I tried every single permutation on 14.02 LXpuppy
the last, being the most recent config you suggested
on new install with LxPup-14.02-s-4g-190214.iso
works fine for theme changes
then compiz_python_lxpup-0.8.8.sfs with sfs-load on the fly
then lxpanel-0.6.1-2-i686-lxpup.pet
then lxpup14.02_compiz_lxp_setup.pet
work fine on boot but after theme change
and after reboot
same issue
default icons in application launcher
system tray , however; seems fine
I tried every single permutation on 14.02 LXpuppy
the last, being the most recent config you suggested
on new install with LxPup-14.02-s-4g-190214.iso
works fine for theme changes
then compiz_python_lxpup-0.8.8.sfs with sfs-load on the fly
then lxpanel-0.6.1-2-i686-lxpup.pet
then lxpup14.02_compiz_lxp_setup.pet
work fine on boot but after theme change
and after reboot
same issue
default icons in application launcher
system tray , however; seems fine
Something else to try....
I think that maybe LxPanel plays better with Compiz than LxPanelX.
This pet:
http://sourceforge.net/projects/lxpup/f ... t/download
converts LxPup14.02 to LxPanel
It should be installed after the Compiz sfs has been installed but before this setup pet is installed:
http://sourceforge.net/projects/lxpup/f ... t/download
Cheers
peebee
_________________
Changing the GTK2 theme does seem to have this effect. No idea why it works with the original theme but then doesn't if you change it....wrayc wrote:work fine on boot but after theme change
and after reboot
same issue
default icons in application launcher
Try putting
Code: Select all
lxpanelctl restart
just before the for loop
This seems to work for me.
I've updated the setup pets with this change.
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
lxpanelctl restart
i will try new setup file with clean install
thanks once again
thanks once again
This seems to work for me.
I've updated the setup pets with this change.
CompizPup announcement
CompizPup is available from SourceForge
Current version is CompizPup-14.02-s-4g-270214.iso
Based on Slacko-5.6.5.6 k3.4.78 nopae
Uses LxPanel instead of LxPanelX
See 1st post for warnings about what sort of hardware this might work on.
It is "an experiment"....
Current version is CompizPup-14.02-s-4g-270214.iso
Based on Slacko-5.6.5.6 k3.4.78 nopae
Uses LxPanel instead of LxPanelX
See 1st post for warnings about what sort of hardware this might work on.
It is "an experiment"....
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
CompizPup updated
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
- neerajkolte
- Posts: 516
- Joined: Mon 10 Feb 2014, 07:05
- Location: Pune, India.
Installed frugal CompizPup 14.03 pae on a small ext3 partition onto an old notebook - Fujitsu Siemens Amilo 1655G - using an external monitor - Acer AL1711 .
CPU AMD Turion ML-34 , ATI EXPRESS 200M videocard.
Working fine with or without save file .Really nice , thank's peebee & all !
However if I try to make a custom remaster , Compiz breakes - so I use a savefile .
I tried it also on my main desktop but Compiz does not get along with my AMD Sapphire Radeon HD 7870XT card and I didn't made it to install the ati-pet for Slacko 5.7.0 and see it working on that machine .
CPU AMD Turion ML-34 , ATI EXPRESS 200M videocard.
Working fine with or without save file .Really nice , thank's peebee & all !
However if I try to make a custom remaster , Compiz breakes - so I use a savefile .
I tried it also on my main desktop but Compiz does not get along with my AMD Sapphire Radeon HD 7870XT card and I didn't made it to install the ati-pet for Slacko 5.7.0 and see it working on that machine .
- Attachments
-
- CompizPup screenshot.jpg
- Screenshot
- (112.07 KiB) Downloaded 793 times
CompizPup-14.03.1-s57-pae-250514
CompizPup-14.03.1-s57-pae-250514
New version uploaded to bring it into line with LxPup14.03-sp1
Cheers
peebee
New version uploaded to bring it into line with LxPup14.03-sp1
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
CompizPup 14.08 beta
CompizPup-14.08.01-s6-nopae.iso
New version - beta pre-release as based on Slacko6Beta2 (Slacko 5.9.3) k3.4.94 non-pae
Same changes as for LxPup14.08 - Slackware14.1 components, latest version PCManFM etc.
New version - beta pre-release as based on Slacko6Beta2 (Slacko 5.9.3) k3.4.94 non-pae
Same changes as for LxPup14.08 - Slackware14.1 components, latest version PCManFM etc.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
CompizPup14.10
New version:
CompizPup-14.10.00-s6-nopae.iso
LxPanel updated to version 0.7.1 + brought into line with LxPup14.10
CompizPup-14.10.00-s6-nopae.iso
LxPanel updated to version 0.7.1 + brought into line with LxPup14.10
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
testing compiz on compizpup
Hi,
I have downloaded and tested compizpup on my dell xps 18.4 inch tablet/ intel i5/ 8gb ram/ 500gb hdd. Here are my observations.
- compizpup is lightening fast. windows are great. almost all features worked well.
- touch did not work. I am aware that puppy also does not have this. However, touch is working in its basic form on fatdog64 and tablet can be used.
- compiz worked fine. However, I did not get the 3-d cube on the screen (showing different screens on different sides) yet. Not sure how to get this as we see in pictures or videos on web. I am a noob. Can you post some instructions step-by-step how to configure compiz?
Also note that I do not have nvidia on my machine. But most threads suggest that compiz works on builtin intel graphics (intel 4400) cards.
Edit (addition): Is it possible to add a onboard (on screen keyboard) to this distro?
Thanks for your efforts and looking forward to hear from you...
I have downloaded and tested compizpup on my dell xps 18.4 inch tablet/ intel i5/ 8gb ram/ 500gb hdd. Here are my observations.
- compizpup is lightening fast. windows are great. almost all features worked well.
- touch did not work. I am aware that puppy also does not have this. However, touch is working in its basic form on fatdog64 and tablet can be used.
- compiz worked fine. However, I did not get the 3-d cube on the screen (showing different screens on different sides) yet. Not sure how to get this as we see in pictures or videos on web. I am a noob. Can you post some instructions step-by-step how to configure compiz?
Also note that I do not have nvidia on my machine. But most threads suggest that compiz works on builtin intel graphics (intel 4400) cards.
Edit (addition): Is it possible to add a onboard (on screen keyboard) to this distro?
Thanks for your efforts and looking forward to hear from you...