Precise Puppy 5.7.1

Please post any bugs you have found
Message
Author
User avatar
James C
Posts: 6618
Joined: Thu 26 Mar 2009, 05:12
Location: Kentucky

#31 Post by James C »

Precise 5.7 PAE version (until I change the kernel :lol: ) manual frugal install. Needed to use nouveau.noaccel=1 kernel parameter to prevent computer freezeup.
Sound and display working on initial boot.....needed to use SNS for internet. Service pack popup appeared on 2nd occasion of launching PPM....... service pack installed.

# report-video
VIDEO REPORT: Precise Puppy, version 5.7

Chip description:
VGA compatible controller: NVIDIA Corporation C61 [GeForce 7025 / nForce 630a] (rev a2)

Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1024x768x16
Depth (bits, or planes): 24
Modules requested to be loaded: dbe

Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): nouveau
Loaded modules: dbe dri dri2 exa extmod fb glx kbd mouse record shadowfb

Actual rendering on monitor:
Resolution: 1440x900 pixels (380x238 millimeters)
Depth: 24 planes

...the above also recorded in /tmp/report-video
# glxgears
1461 frames in 5.0 seconds = 292.103 FPS
1608 frames in 5.0 seconds = 321.439 FPS
1598 frames in 5.0 seconds = 319.543 FPS
1579 frames in 5.0 seconds = 315.636 FPS
1585 frames in 5.0 seconds = 316.927 FPS

-Computer-
Processor : 2x AMD Athlon(tm) 64 X2 Dual Core Processor 5200+
Memory : 3888MB (218MB used)
Machine Type : Physical machine
Operating System : Precise Puppy - 5.7
User Name : root (root)
Date/Time : Mon 29 Jul 2013 06:03:27 PM CDT
-Display-
Resolution : 1440x900 pixels
OpenGL Renderer : Gallium 0.4 on llvmpipe (LLVM 0x300)
X11 Vendor : The X.Org Foundation
-Audio Devices-
Audio Adapter : HDA-Intel - HDA NVidia

User avatar
Ray MK
Posts: 774
Joined: Tue 05 Feb 2008, 09:10
Location: UK

#32 Post by Ray MK »

Precise Puppy version 5.7- retro, released Jul 2013

Manual frugal to ext3 partition and booting with grub4dos. Acer 243LC laptop.
Can’t believe how well it runs on this 10yr old, ram challenged beastie.
All seems to work exceptionally well OTB - very responsive.

# uname -a
Linux puppypc29804 3.2.48 #1 SMP Thu Jul 11 12:20:55 GMT-8 2013 i686 i686 i386 GNU/Linux
# uptime
00:04:16 up 2:47, load average: 0.10, 0.23, 0.17
# free
total used free shared buffers
Mem: 366904 268760 98144 0 40256
-/+ buffers: 228504 138400
Swap: 658660 1036 657624
# top
Mem: 269504K used, 97400K free, 0K shrd, 40396K buff, 176552K cached
CPU: 2% usr 3% sys 0% nic 93% idle 0% io 0% irq 0% sirq
Load average: 0.06 0.21 0.17 1/56 21131

This is a truly exceptional all rounder puppy - and looks so good too.
So pleased to have a BK built OS with Opera. Luvly puppy - many thanks.
Attachments
Hinfo.tar.gz
(8.63 KiB) Downloaded 1299 times
[b]Asus[/b] 701SD. 2gig ram. 8gb SSD. [b]IBM A21m[/b] laptop. 192mb ram. PIII Coppermine proc. [b]X60[/b] T2400 1.8Ghz proc. 2gig ram. 80gb hdd. [b]T41[/b] Pentium M 1400Mhz. 512mb ram.

User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

Precise Puppy 5.7

#33 Post by Billtoo »

I copied the 5.7 PAE directory and several other files (devx etc.)
from my flash drive install on my Gateway desktop to a 16gb SDHC card which has
Upup Raring 3.9.9.1 on it.
I booted up Upup Raring on a hp desktop pc and ran grub4dos, then rebooted
into Precise 5.7 PAE.
video-info-glx 1.5.3 Mon 29 Jul 2013 on Precise Puppy 5.7 Linux 3.9.11 i686
0.0 VGA compatible controller:NVIDIA Corporation GF108 [GeForceGT430](rev a1)
oem: NVIDIA
product: GF108 Board - 1071v0p1 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.11.3
dimensions: 1920x1080 pixels (513x292 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GT 430/PCIe/SSE2/3DNOW!
OpenGL version string: 4.3.0 NVIDIA 319.32
sh-4.1# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
303 frames in 5.0 seconds = 60.410 FPS
301 frames in 5.0 seconds = 60.003 FPS
301 frames in 5.0 seconds = 60.006 FPS
sh-4.1#
AMD Phenom(tm) II X6 1045T Processor
Core 0: @800 1: @800 2: @800 3: @800 4: @800 5: @800 MHz
Memory 8309MB (451MB used)
Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E
PCI Express Fast Ethernet controller (rev 05)
Each pc has a Nvidia Geforce GT 430 graphics card in it.

I saved an hour or so over doing a fresh install with all the setup
etc.
It's working well here too.
Attachments
screenshot2.jpg
(33.14 KiB) Downloaded 2814 times

futwerk
Posts: 397
Joined: Sat 07 May 2011, 22:04

#34 Post by futwerk »

a couple of backgrounds.
Attachments
precisems23,4.jpg
http://www.mediafire.com/folder/7v1msw26s6chb/spuppy
(15.85 KiB) Downloaded 3768 times
precisejy25.jpg
http://www.mediafire.com/folder/7v1msw26s6chb/spuppy
(14.58 KiB) Downloaded 3632 times

User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

#35 Post by BarryK »

I have taken Ogle out of the Service Pack, and re-uploaded the PET, see my blog post:
http://bkhome.org/blog2/?viewDetailed=00341

I am frustrated by this, as Ogle works fine for me, in both flavours.

Anyway, with some tweaking, Gnome-mplayer can be made to play DVDs. It has always been a crappy DVD player though, as it doesn't handle the menus on nearly all DVDs very nicely. But, it inherits the limitations of mplayer.
[url]https://bkhome.org/news/[/url]

User avatar
James C
Posts: 6618
Joined: Thu 26 Mar 2009, 05:12
Location: Kentucky

#36 Post by James C »

backi wrote:Hi
Regarding Gnome-mplayer not working
Go to gnome-mplayer preferences and activate in Interface Tab " Player---
Video (in my case i had to choose -- gl --.) made Video DVD playing .
I set mine to "xv" .....plays fine now.
Attachments
MPlayer.jpg
(41.89 KiB) Downloaded 3684 times

User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

#37 Post by Billtoo »

BarryK wrote: I am frustrated by this, as Ogle works fine for me, in both flavours.
In 5.7 PAE Ogle crashs on 3 out of 4 computers, it works on my Compaq
Presario (radeon 9200) in both PAE and Retro versions.
The other 3 have the proprietary Nvidia driver installed, newest
driver.

Gnome Mplayer is working fine once the video output is set to xv, goes
full screen as well.
Attachments
gmpscrn.jpg
(53.88 KiB) Downloaded 3665 times

gcmartin

#38 Post by gcmartin »

"xv" works. Thanks guys. Maybe "xv" should be OOTB default.

Service Pack
I have not had any success in having pop-up occur when accessing the PPM on any laptop that I have tested.

Here's one of the 2 scenarios I've followed:
  1. boot system to FirstRUN shown below
  2. the 'hostname change" message is being overlayed giving a false impresssion on what to do
  3. PPM started from Install icon on screen
  4. No pop-up occurs
  5. Run PPM update and restart PPM from Menu>Setup>PPM
  6. No pop-up occurs
  7. search (all repos) for "service" (see below)
  8. Service pack found and manually installed.
Not sure if this provides useful information on the problem: Should PPM launch announce the ServicePack?

Hope this helps
Attachments
capture31202.png
FirstRUN with hostname change
(104.99 KiB) Downloaded 3615 times
capture1473.png
Manual search and install is the ONLY method for finding ServicePacks
(110.09 KiB) Downloaded 3555 times

User avatar
broomdodger
Posts: 279
Joined: Sat 10 May 2008, 02:38
Location: Santa Cruz, CA

Re copying to ram

#39 Post by broomdodger »

Barry wrote:You now need a boot param "puppy pfix=nocopy" to prevent that.
Setting nocopy for Precise 5.7 brings initial RAM usage back down to near the same as Precise 5.6.11 that is... 199MB rather than 554MB with copy.

Is copying to RAM mostly an advantage for flash installation?

backi
Posts: 1922
Joined: Sun 27 Feb 2011, 22:00
Location: GERMANY

#40 Post by backi »

HI !

Like Oscar Talks ...have kezboard issues too .
Dont have much time .....will go to detail further ..
German kezboard .

False alarm !!!!!!!

Sorry keyboard issues only where in chromium due wrong Localisation .

Is working now.

User avatar
bigpup
Posts: 13886
Joined: Sun 11 Oct 2009, 18:15
Location: S.C. USA

#41 Post by bigpup »

During development of Lucid Puppy, Gnome Mplayer was worked on, with a lot of troubleshooting and trying to make it work.
It was found that for most hardware, if the video is set to xv by default it will work OK. This setting also had these benefits.
1. it has higher quality
2. the DVD menus work better.

Some hardware will work better if it is set to X11.

Also, other settings in the Edit -> Preferences can be changed to tweak for support of specific hardware capabilities.

The other issue was what graphic driver was being used and what was it's capabilities.

In the end this was the warning note:
Possible Issue: If you have no video in gnome-mplayer please click the play icon on the desktop to open gnome-mplayer, then choose Edit -> Preferences, click the drop-down Video Output menu, and change to x11 (from xv). The video is set to xv by default because 1) it has higher quality, and 2) the DVD menus work better.
XineDVD program was added as the specific player for DVD movies.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected :shock:
YaPI(any iso installer)

backi
Posts: 1922
Joined: Sun 27 Feb 2011, 22:00
Location: GERMANY

#42 Post by backi »

Hi !
I am a bit confused ..... is Precise 5.7 the successor to 5.6.1 ??

User avatar
ASRI éducation
Posts: 3197
Joined: Sat 09 May 2009, 12:10
Location: France
Contact:

#43 Post by ASRI éducation »

backi wrote:Hi !
I am a bit confused ..... is Precise 5.7 the successor to 5.6.1 ??
Yes, it is.
Cordialement,

Sage
Posts: 5536
Joined: Tue 04 Oct 2005, 08:34
Location: GB

#44 Post by Sage »

Amazingly fast boot up for retro of 45s from switch-on, including boot screen, on modest XP2200+/512M machine using FULL onto old 6G HD.

watchdog
Posts: 2021
Joined: Fri 28 Sep 2012, 18:04
Location: Italy

Keyboard problems

#45 Post by watchdog »

My keyboard works in abiword and geany but not to write on the forum. I have not localization package. I have installed firefox 22.0 with my locale from firefox releases.

Edit: I rebooted after activating the box "Keyboard has usb interface" and now the keyboard works on the forum too. My keybord is external to a laptop.
Last edited by watchdog on Tue 30 Jul 2013, 12:37, edited 1 time in total.

backi
Posts: 1922
Joined: Sun 27 Feb 2011, 22:00
Location: GERMANY

#46 Post by backi »

Hi watchdog !

I have to agree ..... there is something with my german keyboard .. does not work as usual but only (for me )in Chromium20 Browser....
. did some changes in countrysettings of the browser..now is working........almost .........still @ is now on another button.

Maybe one have to download and install specific langpack .

.

User avatar
OscarTalks
Posts: 2196
Joined: Mon 06 Feb 2012, 00:58
Location: London, England

#47 Post by OscarTalks »

The easiest way I have found to reproduce the keyboard layout bug is:-

Restart X Server
Open Geany
Type characters such as @ " # \

Perhaps other UK users at least would be so kind as to try this simple test.
Oscar in England
Image

anikin
Posts: 994
Joined: Thu 10 May 2012, 06:16

#48 Post by anikin »

OscarTalks,
awhile ago, I had some keyboard misbehaviour too, with at least two puppies, although it wasn't severe. I created "90-keyboard-layout.conf" like this:

Code: Select all

Section "InputClass"
	Identifier "keyboard-all"
	MatchIsKeyboard "on"
	MatchDevicePath "/dev/input/event*"
	Driver "evdev"
	Option "XkbModel" "pc102"
	Option "XkbLayout" "us,ru"
	Option "XkbOptions"  "grp:ctrl_shift_toggle,grp_led:scroll,compose:rwin"
	Option "XkbVariant" ",winkeys" #xkbvariant0
	Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
and put it in:
usr/share/x11/xorg.conf.d
My problem was, that in geany, I couldn't toggle keyboard layout, and that solved the issue for me (can't remember if I did something else). Just google for "90-keyboard-layout.conf" + your specific XkbOptions. What's important, as I understand it, this conf needs to be there in addition to xkb section of xorg.conf. So I have both.

User avatar
Terryphi
Posts: 761
Joined: Wed 02 Jul 2008, 09:32
Location: West Wales, Britain.

#49 Post by Terryphi »

OscarTalks wrote:The easiest way I have found to reproduce the keyboard layout bug is:-

Restart X Server
Open Geany
Type characters such as @ " # \

Perhaps other UK users at least would be so kind as to try this simple test.
Oscar:

I confirm the bug in Geany (but not any other program I have tried.) I am taking a look at geany.conf.
[b]Classic Opera 12.16 browser SFS package[/b] for Precise, Slacko, Racy, Wary, Lucid, etc available[url=http://terryphillips.org.uk/operasfs.htm]here[/url] :)

cygnus_odile
Posts: 6
Joined: Tue 30 Jul 2013, 14:13
Location: Tokyo, Japan

/root/.Xdefaults has an unecpected space.

#50 Post by cygnus_odile »

Hellow, everyone, and Thanks to Mr Barry K. for your Puppy.
I've been using "Puppy" for long time (about 4yeras), and mainly Japanese edition.

In Recent Precise Puppy's "/root/.Xdefaults" has an unexpected space at the end of line 8.

Code: Select all

Rxvt.keysym.0xFF57: \033[4~ 
So pushing "END" key causes the Cursor to jump and gives an unexpected space at the end of line, when editing the command line or using a text-editor on Urxvt.

This point is corrected in Precise Puppy 550JP ( Mr. Shinobar's Japanese edition).

Dear Mr.Barry K. please delete it (a space) in .Xdefaults and .Xdefaults.back, in next release.

... ... thank you for reading my post through.

Post Reply