Lighthouse 64 602 Beta2 with GIMP-2.8.4 (6-29-2013)

For talk and support relating specifically to Puppy derivatives
Message
Author
User avatar
Q5sys
Posts: 1105
Joined: Thu 11 Dec 2008, 19:49
Contact:

#316 Post by Q5sys »

meeki,
Nice to see you back.
You're old links to your LHPUPrecord are all down. Do you still have it on hand?

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#317 Post by edoc »

gcmartin wrote:@Edoc, I don't remember who helped me, but I seem to remember that I used Live AND Kirk made an updated version of Kino. I also used Kino, but seem to remember that it was slow, but may have worked for a family video I edited.. Kino is built-in to LightHouse. Have you tried it for your project?
I am having two troubles with kino:

1. I cannot get it to actually play the video - it flies though the "scenes" in an instant & I cannot find a way to slow it down to normal speed (really need a slow-motion mode).

2. I'm not getting any audio. Preferences defaults to /dev/dsp which may be incorrect. (Doesn't matter unless #1 is resolved.)

Any ideas, please?
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
meeki
Posts: 122
Joined: Mon 23 Jul 2012, 04:48
Location: Portland OR

lamp

#318 Post by meeki »

I'm so supper excited atm with the lamp build.

Just got the make sfs backup of it working. So if you add stuff to your server like Plone or joomla..... any thing in the lamp dir it will now make a sfs of it for a user version. Kinda like making a derivative but for an sfs.

One command 'mlampbkup' and it then works almost like the Edit-sfs right click that Tazoc made. It should 85% of the code i used was from that :)

It sits at 1.3GB total but 900megs of that is mysql :(
thinking about making 2 ver.
1) apache, php, webmin at 400MB
2) LAMP at 1.3 Gigs

well now all i need is a place to put the bastard :) ver 0.0.1 is ready.
making ver 0.0.2 with zip options for php :( kinda forgot that in my build and you need it for things like owncloud etc.

dancytron
Posts: 1519
Joined: Wed 18 Jul 2012, 19:20

qbittorrent installation

#319 Post by dancytron »

This might be a little bit of a bug.

I loaded the QT64 sfs which is on the Lighthouse server.

Then I went to install qbittorrent from the PPM. I had it install all the dependencies except QT (since I had already loaded the sfs file.

When I went to run it, it failed. In the terminal I got a message that it was missing libboost (sorry, I didn't make note of the exact message).

The PPM said that boost was already installed. However I went ahead and installed it again and that fixed it.

Maybe just a missing link somewhere that could easily be corrected in the next version??

btw, excellent job on this puplet.

gcmartin

#320 Post by gcmartin »

edoc wrote: ... I am having two troubles with kino: ...
@Edoc, I have the same problem you share on a simple import and play in Kino.

I'll look thru my notes to see what tool I used earlier this year in LH64 to click-stitch family videos for an event I needed.

Dont really remember, but I do think I made notes somewhere.

There is OpenShot and LIve available which are much newer than the old Kino (which does not appear to be actively supported anymore).

It maybe time to retire this old packaging in favor of a newer solution which works on a wider variety of formats.

Here to help

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#321 Post by edoc »

I thought OpenShot was being ported but not yet ready.

Sure appreciate anything that will get this done ...

Thanks!
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
Q5sys
Posts: 1105
Joined: Thu 11 Dec 2008, 19:49
Contact:

Re: lamp

#322 Post by Q5sys »

meeki wrote:well now all i need is a place to put the bastard :) ver 0.0.1 is ready.
I've got a server you're welcome to use.

edoc wrote:I thought OpenShot was being ported but not yet ready.

Sure appreciate anything that will get this done ...

Thanks!
There's a new version of Openshot under development right now that will completely blow away the old version. The new functionality it'll have will be amazing, including being able to offload rendering to another machine.
Because Jon's focusing on v2 development, I think work on v1.x is stalled except for minor bug fixes here and there.

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

Re: lamp

#323 Post by edoc »

Q5sys wrote: There's a new version of Openshot under development right now that will completely blow away the old version. The new functionality it'll have will be amazing, including being able to offload rendering to another machine.
Because Jon's focusing on v2 development, I think work on v1.x is stalled except for minor bug fixes here and there.
Is the old version more functional than kino?

Will it work with LH-64-602b?

I am making no progress with kino.
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
Q5sys
Posts: 1105
Joined: Thu 11 Dec 2008, 19:49
Contact:

Re: lamp

#324 Post by Q5sys »

edoc wrote:
Q5sys wrote: There's a new version of Openshot under development right now that will completely blow away the old version. The new functionality it'll have will be amazing, including being able to offload rendering to another machine.
Because Jon's focusing on v2 development, I think work on v1.x is stalled except for minor bug fixes here and there.
Is the old version more functional than kino?

Will it work with LH-64-602b?

I am making no progress with kino.
I've never tried to use Kino. I grabbed the slackware package for Openshot v1.4.3 and it woudln't work, so it'll have to be compiled for it to work with LHP.

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

Re: lamp

#325 Post by edoc »

Q5sys wrote: I've never tried to use Kino. I grabbed the slackware package for Openshot v1.4.3 and it woudln't work, so it'll have to be compiled for it to work with LHP.
It's too late & I'm too tired to even think about compiling anything ... not that I've ever been successful doing so with anything else ... guess I'll wait and hope someone else needs it and is smart enough to compile it without breaking something.

:roll: :lol:
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
Q5sys
Posts: 1105
Joined: Thu 11 Dec 2008, 19:49
Contact:

Re: lamp

#326 Post by Q5sys »

edoc wrote:
Q5sys wrote: I've never tried to use Kino. I grabbed the slackware package for Openshot v1.4.3 and it woudln't work, so it'll have to be compiled for it to work with LHP.
It's too late & I'm too tired to even think about compiling anything ... not that I've ever been successful doing so with anything else ... guess I'll wait and hope someone else needs it and is smart enough to compile it without breaking something.

:roll: :lol:
When v2.0 comes out, I'll be compiling it for LHP. i dont have the time to spend with v1.4.3. Sorry.

User avatar
meeki
Posts: 122
Joined: Mon 23 Jul 2012, 04:48
Location: Portland OR

#327 Post by meeki »

Q5sys wrote:meeki,
Nice to see you back.
You're old links to your LHPUPrecord are all down. Do you still have it on hand?
I do have it.

Just tested it in LHPUP 6.02 and I was happy to see all my error msg I made in the program have paid off.

I have a screen check I used.

Code: Select all

#grabs Displays and screens and outputs in DISPLAY=:x.x format For checking
glxinfo=`glxinfo | grep ^display |sed 's/\:/\ /g' | awk '{print $2 "." $4}'`
Issue is that its throwing an error.

Code: Select all

bash-4.1# glxinfo | grep ^display |sed 's/\:/\ /g' | awk '{print $2 "." $4}'
glxinfo: error while loading shared libraries: libGL.so.1: wrong ELF class: ELFCLASS32
It's kinda funny now going back and looking at all that code I used to make it. Thinking .... wow that looks simple....or.......what was i thinking.

I'm working on a patch now.
I used the glxinfo to get display information if people have multiple monitors and want to record on another screen.

meeki

User avatar
tazoc
Posts: 1157
Joined: Mon 11 Dec 2006, 08:07
Location: Lower Columbia Basin WA US
Contact:

Welcome back Meeki!; Avidemux

#328 Post by tazoc »

Welcome back Meeki! :D

I've been offline for a week or so. Had a tooth extraction and implant done; feeling better now. I just wish I'd kept going to a dentist a few years ago even though I didn't have dental insurance. :oops: Many of my teeth need work now and it is expensive, even with dental coverage, which seems to cover routine visits mostly.

David,
You might give this Pet a try--much better than Kino: Lighthouse Update -> Multimedia category -> Avidemux-2.5.6-x86_64-1gv.pet.

Or Avidemux SFS: http://www.lhpup.org/sfs/602-x86_64/
[url=http://www.lhpup.org/][b][size=100]lhpup.org[/size][/b] [img]http://www.lhpup.org/gallery/images/favicon.png[/img][/url] [url=http://www.lhpup.org/release-lhp.htm#602]Lighthouse 64 6.02[/url]

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#329 Post by edoc »

Thanks tazoc - downloaded the sfs and will reboot to test it.

It works much better than kino - have to experiment with editing & figure out sound processing tomorrow.

I went through the same thing (bunch of between-the-teeth cavities, etc) right when I started college then again (root canals, etc) about 10 years later.
Everything has been pretty stable since.
Last edited by edoc on Fri 13 Sep 2013, 04:26, edited 1 time in total.
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
tazoc
Posts: 1157
Joined: Mon 11 Dec 2006, 08:07
Location: Lower Columbia Basin WA US
Contact:

Re: qbittorrent installation

#330 Post by tazoc »

dancytron wrote:This might be a little bit of a bug.

I loaded the QT64 sfs which is on the Lighthouse server.

Then I went to install qbittorrent from the PPM. I had it install all the dependencies except QT (since I had already loaded the sfs file.

When I went to run it, it failed. In the terminal I got a message that it was missing libboost (sorry, I didn't make note of the exact message).

The PPM said that boost was already installed. However I went ahead and installed it again and that fixed it.

Maybe just a missing link somewhere that could easily be corrected in the next version??

btw, excellent job on this puplet.
Thank you dancytron. A newer qBittorrent-3.0.10.sfs is available (for testing only) at:
http://www.lhpup.org/testing/L64-602/ When I've finished testing I'll move it to the main LH64 SFS repo.

PPM does assume that the Devx SFS is loaded, so that is why it thought boost was already installed. I don't know how to make PPM wiser in that regard. :? Easy to detect the Devx, but PPM keeps all built-in pkg database records in one file, which doesn't indicate whether a pkg is in an extra SFS or the main file.
[url=http://www.lhpup.org/][b][size=100]lhpup.org[/size][/b] [img]http://www.lhpup.org/gallery/images/favicon.png[/img][/url] [url=http://www.lhpup.org/release-lhp.htm#602]Lighthouse 64 6.02[/url]

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

Video Capture

#331 Post by edoc »

Neither my Hauppauge or Siig video capture USB devices are recognized in LH64-602b.

I cannot find any reference to Siig working with Slackware but there were several references to the Hauppauge & Slackware - most mention bttv.

I looked for bttv under Packages but came up empty - then I found this site from Hauppauge:

http://www.hauppauge.com/html/linux.htm

Can anyone point me to the app I need for LH64-602b to talk to the Hauppauge, please?
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

gcmartin

#332 Post by gcmartin »

@eDoc, I just found my notes. It was Avidemux2 that TaZoC has mentioned. It worked OOTB and is added to my system via the Update icon that is built-into the LightHouse desktop. It works and is ever-present after a system save-session to the DVD

Sorry for the delay, as I had trouble finding my notes (again). Thx @TaZoC, again. Work

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#333 Post by edoc »

It shows up as "Avidemux 2.5.6" in Help -> About

I need to find a quick & simple tutorial as I need to output add a few text frames, a few fixed image frames, and a couple of video clips for a 5min promo for families to come alongside international exchange students at the local university.

EDIT1: Found & printed the wiki ...


EDIT2: It seems that this is a rudimentary tool. I guess I need to create text frames in some other tool then import them to the file. Any recommendations for which tool I should use? I'm thinking simple frames that read "Welcome to Georgia, USA", "International Exchange Fellowship", "Share our culture & learn about others", and "Please become a local family to an international student". I also need a few fixed frames of the college sign, an airplane landing at the airport, plus a few photos I already have, in addition to the video clips. WDYT?

David
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
meeki
Posts: 122
Joined: Mon 23 Jul 2012, 04:48
Location: Portland OR

#334 Post by meeki »

Q5sys wrote:meeki,
Nice to see you back.
You're old links to your LHPUPrecord are all down. Do you still have it on hand?
LHPUPrecord - wow its a mess. I was playing catchup and found a guy who did what i did with LHPUPrecord but in Qt.
It works like mine did but with out all the alsa nightmare selections.

SimpleScreenRecorder
http://www.maartenbaert.be/simplescreenrecorder/

Its fast and lightweight!
Compiling it was a nightmare. It has not check msg for the build besides telling you FAIL! so I had to gointo his code on github and look for the line i filed on. Fixed the depend and a --disable for a un-needed.

Give it a try.
SimpleScreenRecorder
SFS - http://puppyfiles.puppytune.org/lightho ... x86_64.sfs
MD5 - http://puppyfiles.puppytune.org/lightho ... 64.sfs.md5

------- All my old links were down :) ---------
Got a RC1 canidant for LAMP and threw it on my new LHPUP64 - LAMP server :)

My repository can be found here.

http://puppyfiles.puppytune.org/lighthouse64/

kinda had to do it. bad to make a LAMP.sfs and not use it :P

User avatar
meeki
Posts: 122
Joined: Mon 23 Jul 2012, 04:48
Location: Portland OR

LAMP

#335 Post by meeki »

LAMP (Linux, Apache, MySql, PHP) + webmin


Quick Start Guide

Install LAMP_Webmin-0.3.0-x86_64.sfs
SFS - http://puppyfiles.puppytune.org/lightho ... x86_64.sfs - 332Megs
MD5 - http://puppyfiles.puppytune.org/lightho ... 64.sfs.md5

Install LAMP_depends-0.3.0-x86_64.sfs
SFS - http://puppyfiles.puppytune.org/lightho ... x86_64.sfs - 78Megs
MD5 - http://puppyfiles.puppytune.org/lightho ... 64.sfs.md5

restart

Open up your web browser.

you can now access all of the below from a nice webpage located at
http://localhost/server
Webmin
login = admin, Pass = password
myPHPadmin
apache
phpinfo

Put all your html or files in the DIR
/root/spot/lamp/apache/apache2/htdocs
this is its home folder for web hosting

I wanted it out of my pupsave file not eating up space. For my server I symbolicly linked it out of my pup to the hdd.

Unless you know how to chown or chmod dont put it linked to another HDD. keep it on the same drive your pet is at.

Backup
Yes thats right. run the command ' mlampbackup '
It will take you through a script that will take every thing in your lamp dir and turn it into a sfs !!! so you can take your stuff with you or backup and changes you make.

Running as root or spot
If you use any port below 1024 it will run as root. Set all ports above 1024 and it will run as spot. At first I had this options script with diologs etc. Then i thought keep it simple stupid. Change ports and hit apply for apache in webmin that simple.

Notes

https works! id recommend making your own keys but ill cover that in a video

The only bug is if you try to restart mysql in webmin. It will turn off.

I will be making a new forum thread on this LAMP and making some howto videos. Ive tried to setup basic things like icons to common files etc.

What will this server run....... Well its packed full of the options.

It installed coppermine with out issue.
http://coppermine-gallery.net/

Installed owncloud just fine
http://owncloud.org/

Should do fine with http://wordpress.org/ or http://www.joomla.org/ CMS's

Clipbucket was an issue. They are working hard on v3 and then it should work fine on this server.

Tell me!

If your needing a build package for the server that was missed in my build
If ya just have a usage question.



hope this gets put to use. wonder if it works in fatdog.





Last edited by meeki on Wed 18 Sep 2013, 15:56, edited 3 times in total.

Post Reply