Precise Puppy 5.6.1-final, May 29, 2013
- OscarTalks
- Posts: 2196
- Joined: Mon 06 Feb 2012, 00:58
- Location: London, England
I made a .PET of the nVidia legacy 173.14.37 driver with kernel 3.2.44 for Precise Puppy 5.6 here:-
http://www.murga-linux.com/puppy/viewtopic.php?t=86424
http://www.murga-linux.com/puppy/viewtopic.php?t=86424
Oscar in England
![Image](http://smokey01.com/OscarTalks/images/2dogs-red.jpg)
![Image](http://smokey01.com/OscarTalks/images/2dogs-red.jpg)
Agere modem driver firmware package upgraded
peebee, and other testers,
I think I found why peebee had such trouble with the new driver. I corrected the cause in the firmware package, as well as making other bug fixes there. Please replace the previous version with the corrected version at the original place:
http://www.murga-linux.com/puppy/viewto ... 629#705629
I go into more detail, there.
Richard
I think I found why peebee had such trouble with the new driver. I corrected the cause in the firmware package, as well as making other bug fixes there. Please replace the previous version with the corrected version at the original place:
http://www.murga-linux.com/puppy/viewto ... 629#705629
I go into more detail, there.
Richard
Booting 5.6 results in a blank screen with the monitor complaining "Input Not Supported". Adding "pfix=nox" to boot menu doesn't help. All recent versions, including 5.5, work OK.
Video card: Nvidia GeForce GT 520
Processor: Intel Dual-Core E6500
MENU.LST excerpt (Grub4DOS):
title Precise Puppy Linux 56 frugal install at sda1/p56
find --set-root /menu.lst
kernel /p56/vmlinuz psubdir=p56 pmedia=atahd pfix=nox
initrd /p56/initrd.gz
/// Edited a few minutes later:
P.S.: It works fine on my laptop, which is an MSI A4000, using an Intel T4300 CPU, GeForce 8200M Video.
Video card: Nvidia GeForce GT 520
Processor: Intel Dual-Core E6500
MENU.LST excerpt (Grub4DOS):
title Precise Puppy Linux 56 frugal install at sda1/p56
find --set-root /menu.lst
kernel /p56/vmlinuz psubdir=p56 pmedia=atahd pfix=nox
initrd /p56/initrd.gz
/// Edited a few minutes later:
P.S.: It works fine on my laptop, which is an MSI A4000, using an Intel T4300 CPU, GeForce 8200M Video.
Last edited by Crash on Tue 28 May 2013, 06:15, edited 1 time in total.
zygo: many thanks for your comments. With Sky, they cloak their verbiage so that it becomes incomprehensible - I cannot even ascertain whether my friend is defaulted to IMAPI or POP. Their 'instructions' point to non-existent menus and options. Vince Cable got it right - this devil is in league with the Devil as well as the devil. No chance the proletariat will stop pouring their shekels into his coffers and avoid using his systems. Sadly, not all good things emanate from the antipodes...
Re: Agere modem driver firmware package upgraded
Hi Richardrerwin wrote:peebee, and other testers,
I think I found why peebee had such trouble with the new driver. I corrected the cause in the firmware package, as well as making other bug fixes there. Please replace the previous version with the corrected version at the original place:
http://www.murga-linux.com/puppy/viewto ... 629#705629
I go into more detail, there.
Richard
Same testing - pristine frugal install of Precise 5.6 k3.2.44 - install your 2 pets: new firmware + agere hda 11c1:1040 driver - reboot
lsmod shows both agrmodem and agrserial loaded
![Smile :)](./images/smilies/icon_smile.gif)
dmesg shows ttyAGS3 has been created
![Smile :)](./images/smilies/icon_smile.gif)
connect wizard shows ttyAGS3 available
![Smile :)](./images/smilies/icon_smile.gif)
HOWEVER
modem-stats -c ATI3 /dev/ttyAGS3
and
clicking the Test button in PupDial
both kill Precise stone dead - power off button needed to recover.
![Mad :x](./images/smilies/icon_mad.gif)
Would taking a camera shot of the screen after the crash help?
Cheers
PeeBee
Last edited by peebee on Tue 28 May 2013, 12:17, edited 1 time in total.
![Image](http://e-nautia.com/peebee/disk/share/logo.png)
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Sage, Surely you don't mean MAPI http://en.wikipedia.org/wiki/IMAPI in relation to mail. You haven't been using some other OS have you? ![Smile :)](./images/smilies/icon_smile.gif)
![Smile :)](./images/smilies/icon_smile.gif)
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
gexec bug
See screenshot
Note,
I did not really want to "run as root"
Unticked "run as root" I did not see any output of that command.
Ticking "run in terminal" makes no difference.
If I am running in terminal I do not need gexec at all.
So I am voting for "remove gexec from puppy" unless someone enlightened me how to use gexec![Cool 8)](./images/smilies/icon_cool.gif)
Note,
I did not really want to "run as root"
Unticked "run as root" I did not see any output of that command.
Ticking "run in terminal" makes no difference.
If I am running in terminal I do not need gexec at all.
So I am voting for "remove gexec from puppy" unless someone enlightened me how to use gexec
![Cool 8)](./images/smilies/icon_cool.gif)
- Attachments
-
- gexec.png
- (7.13 KiB) Downloaded 3862 times
Regarding the Agere modem driver testing effort
As you can see above, peebee reports that the HDA variant (agrsm-11c11040) of the driver crashes puppy. From the screen shot he sent me, I suspect the problem lies with the interface to the ALSA HDA driver or codec. I have not gone much beyond that, as I have not found clues, yet, on google.
The screen line of interest contains "findHDACodec+0x10/0x38 [agrmodem]"; 5 lines above it is "do_page_fault...". (I can use any help, at all, with this.)
But that probably affects only the HDA agrmodem driver. The two PCI variants should not have that problem, so need to be tested by someone who has one of the PCI Agere modems that use the drivers agrsm06pci or agrsm048pci.
Remember: they all require the new firmware_linux_module_agrmodem package.
Richard
The screen line of interest contains "findHDACodec+0x10/0x38 [agrmodem]"; 5 lines above it is "do_page_fault...". (I can use any help, at all, with this.)
But that probably affects only the HDA agrmodem driver. The two PCI variants should not have that problem, so need to be tested by someone who has one of the PCI Agere modems that use the drivers agrsm06pci or agrsm048pci.
Remember: they all require the new firmware_linux_module_agrmodem package.
Richard
Last edited by rerwin on Wed 29 May 2013, 02:53, edited 1 time in total.
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Re: gexec bug
Ok, removed from Precise.L18L wrote:See screenshot
Note,
I did not really want to "run as root"
Unticked "run as root" I did not see any output of that command.
Ticking "run in terminal" makes no difference.
If I am running in terminal I do not need gexec at all.
So I am voting for "remove gexec from puppy" unless someone enlightened me how to use gexec
[url]https://bkhome.org/news/[/url]
1. Booting Precise-5.6 from CD-RW, with precisesave.3fs.
All looking good, and working well so far.
Looks like I'll be switching from Slacko to this as my number-1 Puppy.
2. Tweaks made so far:
a. Changes made so as to be able to choose if/when to save session changes back to the precisesave file.
b. Installed "Firefox-16.0.1-i686-up.
c. Installed PupsaveHotbackup-1.3.
d. Installed wine-1.4.
e. Updated PPM.
f. Installed thunderbird_17.0.6+build1.
g. Installed FoxitReader-1.1.0.
h. CUPS used to install "HP Desjet 840c".
i. Installed PupClockset-1.6.
j. /root/.jwmrc-tray edit to change xload display.
k. Installed pupsnap-2.1_scrot-0.8_32bit.
l. Installed smm-1.0.pup.
m. Thunderbird_17.0.6+build1 set up to use common profile held in /mnt/home/Mail.
n. Fixed Xfe "Open with..." problem [workaround].
All looking good, and working well so far.
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Looks like I'll be switching from Slacko to this as my number-1 Puppy.
2. Tweaks made so far:
a. Changes made so as to be able to choose if/when to save session changes back to the precisesave file.
b. Installed "Firefox-16.0.1-i686-up.
c. Installed PupsaveHotbackup-1.3.
d. Installed wine-1.4.
e. Updated PPM.
f. Installed thunderbird_17.0.6+build1.
g. Installed FoxitReader-1.1.0.
h. CUPS used to install "HP Desjet 840c".
i. Installed PupClockset-1.6.
j. /root/.jwmrc-tray edit to change xload display.
k. Installed pupsnap-2.1_scrot-0.8_32bit.
l. Installed smm-1.0.pup.
m. Thunderbird_17.0.6+build1 set up to use common profile held in /mnt/home/Mail.
n. Fixed Xfe "Open with..." problem [workaround].
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Precise Puppy 5.6.1 has been released, see announcement:
http://bkhome.org/blog2/?viewDetailed=00275
Have fun!
http://bkhome.org/blog2/?viewDetailed=00275
Have fun!
[url]https://bkhome.org/news/[/url]
- ASRI éducation
- Posts: 3197
- Joined: Sat 09 May 2009, 12:10
- Location: France
- Contact:
Merci Barry.BarryK wrote:Precise Puppy 5.6.1 has been released, see announcement:
http://bkhome.org/blog2/?viewDetailed=00275
Have fun!
Ongoing Sound Problems
Every Precise I've tried exhibits the same behavior. Either the kernel, Alsa or Retrovol do not work with my Intel audio chip
Processor : 8x Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz
Audio Adapter : HDA-Intel - HDA Intel PCH
snd_hda_intel : Intel HDA driver
snd_hda_codec : HDA codec core
snd_hwdep : Hardware dependent layer
snd_pcm_oss : PCM OSS emulation for ALSA.
snd_mixer_oss : Mixer OSS emulation for ALSA.
snd_pcm : Midlevel PCM code for ALSA.
snd_seq_dummy : ALSA sequencer MIDI-through client
snd_seq_oss : OSS-compatible sequencer module
snd_seq_midi : Advanced Linux Sound Architecture sequencer MIDI synth.
snd_seq_midi_event : MIDI byte <-> sequencer event coder
snd_rawmidi : Midlevel RawMidi code for ALSA.
snd_seq : Advanced Linux Sound Architecture sequencer.
snd_seq_device : ALSA sequencer device management
snd_timer : ALSA timer interface
shpchp : Standard Hot Plug PCI Controller Driver
snd : Advanced Linux Sound Architecture driver for soundcards.
soundcore : Core sound module
PCI bridge : Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])
PCI bridge : Intel Corporation Panther Point PCI Express Root Port 5 (rev c4) (prog-if 00 [Normal decode])
When precise first boots, it does not recognize the sound chip, when I finally tick the front box in retrovol, I get sound, but not speaker icon.
Upon reboot, the settings for retrovol are not saved.
I've tried every option that alsa and retrovol offer for configuration.
What's really interesting is that Raring and Upup recognize the sound ship, the speaker icon is not muted as it is in Precise.
It seems that the "stock" precise distributions have the problem, while non-stock ones do not.
I'd rslly appreciate some help with this.
thanks
Thom
Processor : 8x Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz
Audio Adapter : HDA-Intel - HDA Intel PCH
snd_hda_intel : Intel HDA driver
snd_hda_codec : HDA codec core
snd_hwdep : Hardware dependent layer
snd_pcm_oss : PCM OSS emulation for ALSA.
snd_mixer_oss : Mixer OSS emulation for ALSA.
snd_pcm : Midlevel PCM code for ALSA.
snd_seq_dummy : ALSA sequencer MIDI-through client
snd_seq_oss : OSS-compatible sequencer module
snd_seq_midi : Advanced Linux Sound Architecture sequencer MIDI synth.
snd_seq_midi_event : MIDI byte <-> sequencer event coder
snd_rawmidi : Midlevel RawMidi code for ALSA.
snd_seq : Advanced Linux Sound Architecture sequencer.
snd_seq_device : ALSA sequencer device management
snd_timer : ALSA timer interface
shpchp : Standard Hot Plug PCI Controller Driver
snd : Advanced Linux Sound Architecture driver for soundcards.
soundcore : Core sound module
PCI bridge : Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])
PCI bridge : Intel Corporation Panther Point PCI Express Root Port 5 (rev c4) (prog-if 00 [Normal decode])
When precise first boots, it does not recognize the sound chip, when I finally tick the front box in retrovol, I get sound, but not speaker icon.
Upon reboot, the settings for retrovol are not saved.
I've tried every option that alsa and retrovol offer for configuration.
What's really interesting is that Raring and Upup recognize the sound ship, the speaker icon is not muted as it is in Precise.
It seems that the "stock" precise distributions have the problem, while non-stock ones do not.
I'd rslly appreciate some help with this.
thanks
Thom
Precise Puppy 5.6.1-final, May 29, 2013
I did a fresh manual frugal install of 561 to a 16gb SDHC card.
video-info-glx 1.5.3 Wed 29 May 2013 on Precise Puppy 5.6.1 Linux 3.2.44 i686
2.0 VGA compatible controller:
Intel Corporation Ivy Bridge Graphics Controller (rev 09)
oem: Intel(R) Sandybridge/Ivybridge Graphics Chipset Accelerated VGA BIOS
product:
Intel(R) Sandybridge/Ivybridge Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: intel
X.Org version: 1.11.3
dimensions: 1280x1024 pixels (338x270 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Desktop x86/MMX/SSE2
OpenGL version string: 2.1 Mesa 8.0.4
Intel(R) Core(TM) i5-3550 CPU @ 3.30GHz
Core 0: @1600 1: @1600 2: @1600 3: @1600 MHz
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
303 frames in 5.0 seconds = 60.456 FPS
301 frames in 5.0 seconds = 60.020 FPS
301 frames in 5.0 seconds = 60.020 FPS
#
Network controller Ralink corp. RT5390 Wireless 802.11n 1T/1R PCIe
I updated ppm and then installed firefox-21, I installed kdegames and
digikam-2.50 as well.
I used getflash to install the latest flashplayer plugin.
Once kdegames or digikam are installed you get an error if you try to
change the password for spot or root.
Digikam created a menu entry under graphics but clicking on it doesn't
launch digikam, in 5.6 I was using gexec to launch digikam but it's
not included in 5.6.1 so I made a pet of grun-0.93 and it works fine.
I fiddled with the digikam desktop file but couldn't get it to start
from the menu icon.
That's it so far.
video-info-glx 1.5.3 Wed 29 May 2013 on Precise Puppy 5.6.1 Linux 3.2.44 i686
2.0 VGA compatible controller:
Intel Corporation Ivy Bridge Graphics Controller (rev 09)
oem: Intel(R) Sandybridge/Ivybridge Graphics Chipset Accelerated VGA BIOS
product:
Intel(R) Sandybridge/Ivybridge Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: intel
X.Org version: 1.11.3
dimensions: 1280x1024 pixels (338x270 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Desktop x86/MMX/SSE2
OpenGL version string: 2.1 Mesa 8.0.4
Intel(R) Core(TM) i5-3550 CPU @ 3.30GHz
Core 0: @1600 1: @1600 2: @1600 3: @1600 MHz
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
303 frames in 5.0 seconds = 60.456 FPS
301 frames in 5.0 seconds = 60.020 FPS
301 frames in 5.0 seconds = 60.020 FPS
#
Network controller Ralink corp. RT5390 Wireless 802.11n 1T/1R PCIe
I updated ppm and then installed firefox-21, I installed kdegames and
digikam-2.50 as well.
I used getflash to install the latest flashplayer plugin.
Once kdegames or digikam are installed you get an error if you try to
change the password for spot or root.
Digikam created a menu entry under graphics but clicking on it doesn't
launch digikam, in 5.6 I was using gexec to launch digikam but it's
not included in 5.6.1 so I made a pet of grun-0.93 and it works fine.
I fiddled with the digikam desktop file but couldn't get it to start
from the menu icon.
That's it so far.
- Attachments
-
- passwd.jpg
- (10.69 KiB) Downloaded 2163 times
-
- digikamscrn.jpg
- (83.78 KiB) Downloaded 2104 times
-
- grun-0.9.3-i686.pet
- (20.73 KiB) Downloaded 481 times
Precise Puppy version 5.6.1
So far all looking good on my E732 laptop. Manual frugal to ntfs partition and booting with grub4dos from an ext2 SDcard.
# uname -a
Linux puppypc20485 3.2.44 #1 SMP Sun May 5 11:42:44 GMT-8 2013 i686 i686 i386 GNU/Linux
# free
total used free shared buffers
Mem: 1805224 675724 1129500 0 73256
-/+ buffers: 602468 1202756
Swap: 0 0 0
#
Will use for a few days and report - feels faster than 5.6. My imagination ?
So far all looking good on my E732 laptop. Manual frugal to ntfs partition and booting with grub4dos from an ext2 SDcard.
# uname -a
Linux puppypc20485 3.2.44 #1 SMP Sun May 5 11:42:44 GMT-8 2013 i686 i686 i386 GNU/Linux
# free
total used free shared buffers
Mem: 1805224 675724 1129500 0 73256
-/+ buffers: 602468 1202756
Swap: 0 0 0
#
Will use for a few days and report - feels faster than 5.6. My imagination ?
- Attachments
-
- Hinfo.tar.gz
- (8.09 KiB) Downloaded 464 times
[b]Asus[/b] 701SD. 2gig ram. 8gb SSD. [b]IBM A21m[/b] laptop. 192mb ram. PIII Coppermine proc. [b]X60[/b] T2400 1.8Ghz proc. 2gig ram. 80gb hdd. [b]T41[/b] Pentium M 1400Mhz. 512mb ram.
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
Re: Precise Puppy 5.6.1-final, May 29, 2013
Here are some alternatives to gexecBilltoo wrote:... in 5.6 I was using gexec to launch digikam but it's
not included in 5.6.1 ...
![Cool 8)](./images/smilies/icon_cool.gif)
I like alienjeff's best
![Wink :wink:](./images/smilies/icon_wink.gif)