Lighthouse 64 601 Beta (Closed, see first post)

For talk and support relating specifically to Puppy derivatives
Message
Author
User avatar
James C
Posts: 6618
Joined: Thu 26 Mar 2009, 05:12
Location: Kentucky

#76 Post by James C »


User avatar
Q5sys
Posts: 1105
Joined: Thu 11 Dec 2008, 19:49
Contact:

#77 Post by Q5sys »

I know, ECC ram is expensive though. The plan is to have 128gb by the end of the year.

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#78 Post by edoc »

Are you referring to the ASUS Z9PE-D16/2L mb?

I was hoping it was the Beta ...
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
Q5sys
Posts: 1105
Joined: Thu 11 Dec 2008, 19:49
Contact:

#79 Post by Q5sys »

edoc wrote:Are you referring to the ASUS Z9PE-D16/2L mb?

I was hoping it was the Beta ...
Yea the "It's Alive" comment was in reference to the computer I've been talking about building for a while. Specs are show in that picture.
We are still waiting on the Beta. Just keep in mind that the longer you wait the better the product will be. :P

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#80 Post by edoc »

I can't even see the laptop that is waiting on the Beta ... it's hidden under a pile of papers and things ... it helps me to be less impatient if I can't see it! :roll:
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
tazoc
Posts: 1157
Joined: Mon 11 Dec 2006, 08:07
Location: Lower Columbia Basin WA US
Contact:

#81 Post by tazoc »

AwesomesaurusRex wrote:I'm new to linux and I've been looking at lots of screenshots online and alot of the ones I like use something called fluxbox. do you have this for your version of linux? I looked on your site but i did not see it, but I sometimes miss things by looking too fast.
Fluxbox is not currently supported in Lighthouse. There are a lot of desktops/window managers available however I think Openbox/LXPanel with Rox desktop, the default in Lighthouse 64 and Fatdog 64 is now my favorite, mostly because it is fast, reliable and looks good to me. KDE is my second, however I get impatient waiting for it to load. Fluxbox-1.3.2 is available in PPM, however ~/.xinitrc needs work to actually use Fluxbox, as currently it gets covered up by Rox or JWM. I will try to update for it as time allows, however I don't know about the flux root menus--seem not to be Xdg compliant so might be difficult to refresh when installing apps. In other words the menus won't update automatically although they can be manually configured if you know how to determine what command starts each new app.

@All,
I received the Asus G75 Notebook w/Win8 I ordered and I've been testing 602 (and Fatdog 621) with it. So far UEFI doesn't work properly with either. Boots to console OK, but X won't start, except for choosing the fbdev (generic frame buffer) driver, with very limited resolutions, as with the vesa fallback. If I disable UEFI by enabling CSM (Compatibility_Support_Module) in BIOS setup, then X starts normally. So I'm not encouraged by these preliminary results. It looks like I'll need to update the release notes accordingly. I'm also having some difficulties with the proprietary nvidia driver, though it works in Fatdog. Hope to sort that out before releasing 602.

-TaZoC
[url=http://www.lhpup.org/][b][size=100]lhpup.org[/size][/b] [img]http://www.lhpup.org/gallery/images/favicon.png[/img][/url] [url=http://www.lhpup.org/release-lhp.htm#602]Lighthouse 64 6.02[/url]

gcmartin

LH64 is touch screen enabled

#82 Post by gcmartin »

@TaZoC
Tested Mariner 601+ on HP Touchsmart TX2.

Desktop touch screen subsystem works, OOTB, for launch/drag-drop/close/etc. Tris includes taskbar and other things I would use a mouse for. Mouse, thus far, is not necessary.

Issue with Touch
Even though touch replaces the mouse for mouse button 1 operations, some apps make use of mouse button 2. Have not found a way to do mouse button 2 functions at this point in time?

Will post should I find other issues.

Thanks, again, for your help and this great work.

gcmartin

Problem with LH64 wireless on HP TX2 Laptop

#83 Post by gcmartin »

I am experiencing a connection problem with the "touch" HP when trying to connect to the wireless LAN.

Following collected from terminal commands

Code: Select all

bash-4.1# ip addr 
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 00:23:8b:e1:71:93 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq qlen 1000
    link/ether 00:21:00:eb:7c:6e brd ff:ff:ff:ff:ff:ff

bash-4.1# lsmod | grep 80211
mac80211              221415  1 b43
cfg80211              173913  2 b43,mac80211
rfkill                 14899  2 cfg80211,hp_wmi

bash-4.1# lspci | grep -ie net -e wire
08:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)
09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
FRISBEE does NOT show "the close-by" wireless networks
And, "Puppy Network Interface Wizard" yields the following messages on connection attempts:
Main box
"Test"
pop-up box 1
Error!
Failed to raise interface wlan0.
Failed command was: ifconfig wlan0 up
Error returned was:
ifconfig: SIOCSIFFLAGS: Operation not possible due to RF-kill
Main box
'Unable to connect to a wireless network' ...

Advise.

P.S. Please note, this is not a critical necessity as I expect to use the next version on LH64 on this "touch" laptop.
Attachments
Hardinfo_HP-tx2.tar
Laptop Hardinfo Report
(40 KiB) Downloaded 330 times

User avatar
tazoc
Posts: 1157
Joined: Mon 11 Dec 2006, 08:07
Location: Lower Columbia Basin WA US
Contact:

Re: Problem with LH64 wireless on HP TX2 Laptop

#84 Post by tazoc »

gcmartin wrote:I am experiencing a connection problem with the "touch" HP when trying to connect to the wireless LAN.

Code: Select all

bash-4.1# lsmod | grep 80211
mac80211              221415  1 b43
cfg80211              173913  2 b43,mac80211
rfkill                 14899  2 cfg80211,hp_wmi

bash-4.1# lspci | grep -ie net -e wire
08:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)
09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
FRISBEE does NOT show "the close-by" wireless networks

'Unable to connect to a wireless network' ...
  1. Please run this in a terminal:

    Code: Select all

    cat /etc/acpi/wifi-driver
    and post the output.
  2. Then use Menu -> Setup -> BootManager -> Services -> enable the BC-wl (Load proprietary Broadcom wireless driver) service -> OK and reboot.
If you still can't see any wireless networks please repeat step 1.

Re: touch screen right/middle click, I don't know. Maybe connect a USB mouse?
[url=http://www.lhpup.org/][b][size=100]lhpup.org[/size][/b] [img]http://www.lhpup.org/gallery/images/favicon.png[/img][/url] [url=http://www.lhpup.org/release-lhp.htm#602]Lighthouse 64 6.02[/url]

gcmartin

#85 Post by gcmartin »

Code: Select all

# cat /etc/acpi/wifi-driver
b43
The screen below leads to a an error message. It yields message: BootManager not available on initial boot...Must save-session, reboot,first to see Bootmanager to configure.
Attachments
HP-TX2_Touch.png
Attempt to run Bootmanager config utility errors out when no save-session exist.
(114.77 KiB) Downloaded 581 times

gcmartin

Broadcom service added, save-session and rebooted

#86 Post by gcmartin »

Wireless Problem is still with this laptop with same symptoms after recommendations followed.

Scenario:
  1. A save-session created on reboot.
  2. cat command still results "b43".
  3. Boot Manager now displays, services selected, followed with Broadcom... turned on (shown below)
  4. system was rebooted, again with save-session
  5. Frisbee still not showing available networks
  6. LAN setup also not showing available networks.
This system came with Vista. Can the MS driver be brought to bear or should I wait for next LH64 release?

gasem
Posts: 11
Joined: Sat 18 May 2013, 20:19

#87 Post by gasem »

Is there a way to adjust the savefile time from 30 min in a frugal install?

Tnx

HiDeHo
Posts: 311
Joined: Wed 16 Mar 2011, 09:57

#88 Post by HiDeHo »

Hi just wondering if Lighthouse puppy is still maintained. even if not by the original developer. It is a great operating system.

i used lighthouse as my main puppy os until development stopped. then when saluki came about I went to that. now saluki is not being developed.

anyway if lighthouse is developed i will start using it again.

DO you recommend I learn how to maintain puppy so I can update and maintain the distro i like myself. It just seems like a lot of hard work to me.

Jim1911
Posts: 2460
Joined: Mon 19 May 2008, 20:39
Location: Texas, USA

#89 Post by Jim1911 »

HiDeHo wrote:Hi just wondering if Lighthouse puppy is still maintained. even if not by the original developer. It is a great operating system.

i used lighthouse as my main puppy os until development stopped. then when saluki came about I went to that. now saluki is not being developed.

anyway if lighthouse is developed i will start using it again.

DO you recommend I learn how to maintain puppy so I can update and maintain the distro i like myself. It just seems like a lot of hard work to me.
Tazoc is now maintaining Lighthouse again as you can see with this super 601 beta distribution. He should be distributing a new beta shortly. This is one of the best pups ever.

User avatar
Q5sys
Posts: 1105
Joined: Thu 11 Dec 2008, 19:49
Contact:

Re: Problem with LH64 wireless on HP TX2 Laptop

#90 Post by Q5sys »

tazoc wrote: Re: touch screen right/middle click, I don't know. Maybe connect a USB mouse?
Lol. Some people don't want to use a mouse like a normal person.
As for the answer... gcmartin has several options.

1) ask the kernel devs who wrote the driver (they will tell him to do #2)
2) grab the source code for the driver and look for himself

3) use a mouse like a normal person

gcmartin

#91 Post by gcmartin »

Thanks Q5Sys for the disruption...again. Of course, I'm sure you will try to defend it as helpful. Shame, though. Your behavior does NOT help the thread or the perceptions others will get.

Peace be with you

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#92 Post by edoc »

I took his post as humorous ... he just forgot the LOL ...

Here it is :lol:
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
Q5sys
Posts: 1105
Joined: Thu 11 Dec 2008, 19:49
Contact:

#93 Post by Q5sys »

edoc wrote:I took his post as humorous ... he just forgot the LOL ...

Here it is :lol:
It was both serious and factual. If he wants answers, he's going to have to go to the people who wrote the driver. Taz admitted he doesnt have that information. The source for that information: Upstream.

Even if we wanted to do the work for him and find out the answer for him so he didnt have to apply any effort, we cant because we dont know what driver he's using and what touch hardware he's got. So the ball is in his court. (or anyone else who has this problem)

But I guess him making a comment about me is more important than him wanting to find the solution to his problem. :roll:

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#94 Post by edoc »

I have misunderstood the complexities and relationships between the various elements of Puppy, and the associated apps, and have been reminded more than once which is managed by Puppy volunteers and which are controlled elsewhere.

I've also struggled with various specific elements, esp. CUPS, though that one has been relatively trouble-free for quite a while.

Now I'm looking for new trouble as I unintentionally bought a laptop that is hobbled by the UEFI nonsense and am awaiting the BETA 602-UEFI so I can test and break something ...

Puppy is a great family but sometimes we have little squabbles and sometimes things don't translate well across cultures and languages.

My son has reminded me that Aussies especially have a manner of speaking that is rather different than Americans & I recall an international student from Germany sharing that her style of speech was often misunderstood as angry/confrontational when such was not her intent.

Life in a shrinking world ...
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
Q5sys
Posts: 1105
Joined: Thu 11 Dec 2008, 19:49
Contact:

#95 Post by Q5sys »

edoc wrote:
Now I'm looking for new trouble as I unintentionally bought a laptop that is hobbled by the UEFI nonsense and am awaiting the BETA 602-UEFI so I can test and break something ...
Can you disable UEFI in the BIOS? Some systems allow you to do that. (mine is one of them) There also maybe a non UEFI bios image you can flash, and then flash back the stock bios after 602 comes out.

Does the Fatdog64 with UEFI work for you?

Post Reply