Puppy Linux 4.31glibc 2.19 - Rebuilt Iso unetbootin tested

For talk and support relating specifically to Puppy derivatives
Post Reply
Message
Author
darry19662018
Posts: 721
Joined: Sat 31 Mar 2018, 08:01
Location: Rakaia
Contact:

Puppy Linux 4.31glibc 2.19 - Rebuilt Iso unetbootin tested

#1 Post by darry19662018 »

See last post for experimental version with later glib2.32 by Watchdog and later dbus libraries.

Update 02.09.2019

New unetbootin tested ISO: https://archive.org/download/pup4.311gl ... 2019v2.iso

Features (new) libatomic 6.30, libgconf, libvpx, libxcb, lxrandr, sfsload, pre-record, pavrecord, zarfy, listDD, uextract, xvkbd and corrected the old leftover seamonkey problem.

Update: 10.8.2019

New Iso that has been rebuilt because of previous problems with live-cd booting using woofy 0.91 by scottman. Tested using Unetbootin (sorry can't cd's to test using livecd boot). Browsers are accessed from jwm menu. Also included the excellent Peasy firewall Monitor to be used for monitoring firewall activity - access is from network menu - choose install tryapplet. Has updated PSIP and Deadbeef static 0.72.

https://archive.org/details/pup4.311gli ... 794sserev1

Iso: https://archive.org/download/pup4.311gl ... 9%29v1.iso

If you would rather perform the glibc 2.19 upgrade to 4.31 then I have included all you need at Archive.org and instructions in the last post of this thread.

There is a version of the seamonkey Browser without updater available here: https://archive.org/download/pup4.311gl ... 9tweak.pet
As updating will update to a gtk3 version which won't run. When there is a new build this will be added. Thank you. Please read on an enjoy 4.31 Phoenix.
Last edited by darry19662018 on Sun 08 Sep 2019, 07:26, edited 16 times in total.
Puppy Linux Wiki: [url]http://wikka.puppylinux.com/HomePage[/url]

[url]https://freemedia.neocities.org/[/url]

watchdog
Posts: 2021
Joined: Fri 28 Sep 2012, 18:04
Location: Italy

#2 Post by watchdog »

gtkdialog4-0.8.3-i486.pet is needed to make working sfs_load-2.4. A good puppy for very old hardware or to play with.

darry19662018
Posts: 721
Joined: Sat 31 Mar 2018, 08:01
Location: Rakaia
Contact:

#3 Post by darry19662018 »

Gtkdialog 4 is included. Ran sfsload and it is working.
Puppy Linux Wiki: [url]http://wikka.puppylinux.com/HomePage[/url]

[url]https://freemedia.neocities.org/[/url]

User avatar
kschewe
Posts: 16
Joined: Fri 02 Aug 2019, 13:46
Location: Winnipeg Canada

#4 Post by kschewe »

Is there a bootable iso of this?
thank

User avatar
mikeslr
Posts: 3890
Joined: Mon 16 Jun 2008, 21:20
Location: 500 seconds from Sol

#5 Post by mikeslr »

kschewe wrote:Is there a bootable iso of this?
thank
Click on the first link in the original post. It will take you to a page on archive.org. On the right-hand side under "Download Options", click on the "ISO Image" just below that.

If you try it, please post your experience and especially the amount of RAM your computer has. Puppies, capable of handling today's Websites, for RAM-Challenged computer are hard to find.

Don't forget to thank darry19662018.

darry19662018
Posts: 721
Joined: Sat 31 Mar 2018, 08:01
Location: Rakaia
Contact:

#6 Post by darry19662018 »

mikeslr wrote:
kschewe wrote:Is there a bootable iso of this?
thank
Click on the first link in the original post. It will take you to a page on archive.org. On the right-hand side under "Download Options", click on the "ISO Image" just below that.

If you try it, please post your experience and especially the amount of RAM your computer has. Puppies, capable of handling today's Websites, for RAM-Challenged computer are hard to find.

Don't forget to thank darry19662018.
Current iso: https://archive.org/download/pup4.311gl ... serev1.iso
Puppy Linux Wiki: [url]http://wikka.puppylinux.com/HomePage[/url]

[url]https://freemedia.neocities.org/[/url]

darry19662018
Posts: 721
Joined: Sat 31 Mar 2018, 08:01
Location: Rakaia
Contact:

#7 Post by darry19662018 »

Found in order to use Watchdog's Seamonkey .pet you need to install fontconfig from wary repo here:
https://distro.ibiblio.org/puppylinux/p ... .0-w5c.pet

Will be added to next iso.
Puppy Linux Wiki: [url]http://wikka.puppylinux.com/HomePage[/url]

[url]https://freemedia.neocities.org/[/url]

darry19662018
Posts: 721
Joined: Sat 31 Mar 2018, 08:01
Location: Rakaia
Contact:

#8 Post by darry19662018 »

I remember years ago when we were looking at glibc2.11 upgrade we had to add a line to /etc/profile
original thread: http://murga-linux.com/puppy/viewtopic. ... 614#701614

Code: Select all

export LC_ALL=C
Again will be fixed in next iso.

Reason breaks pmount.
Puppy Linux Wiki: [url]http://wikka.puppylinux.com/HomePage[/url]

[url]https://freemedia.neocities.org/[/url]

watchdog
Posts: 2021
Joined: Fri 28 Sep 2012, 18:04
Location: Italy

#9 Post by watchdog »

Psip-1.42 by smokey01 is working in this puppy with symlinks libssl.so.1 and libcrypto.so.1.

http://smokey01.com/psip/

The built-in psip no longer works.

darry19662018
Posts: 721
Joined: Sat 31 Mar 2018, 08:01
Location: Rakaia
Contact:

#10 Post by darry19662018 »

https://archive.org/download/pup4.311gl ... SErev2.iso

Notes: Added New recent PSIP with openssl libs. Corrected /etc/profile to fix pmount. Removed Puppy Browser.

Added Seamonkey 2.46 as well as the Palemoon SSE build in first ISO.

Updated Mtpaint - thanks Don. UExtract and listDD are also included.
Puppy Linux Wiki: [url]http://wikka.puppylinux.com/HomePage[/url]

[url]https://freemedia.neocities.org/[/url]

watchdog
Posts: 2021
Joined: Fri 28 Sep 2012, 18:04
Location: Italy

pup-advert-blocker-p4

#11 Post by watchdog »

I suggest adding the following software for the guys who want it:

http://murga-linux.com/puppy/viewtopic. ... 221#957221

darry19662018
Posts: 721
Joined: Sat 31 Mar 2018, 08:01
Location: Rakaia
Contact:

Re: pup-advert-blocker-p4

#12 Post by darry19662018 »

watchdog wrote:I suggest adding the following software for the guys who want it:

http://murga-linux.com/puppy/viewtopic. ... 221#957221
Thanks Watchdog in next version.
Puppy Linux Wiki: [url]http://wikka.puppylinux.com/HomePage[/url]

[url]https://freemedia.neocities.org/[/url]

darry19662018
Posts: 721
Joined: Sat 31 Mar 2018, 08:01
Location: Rakaia
Contact:

#13 Post by darry19662018 »

Well third iso has frisbee back in and working. Libreadline was required.

This is probably the final iso and still includes the two browsers Palemoon 27.94SSE and Seamonkey 2.46. Added Pup Advert blocker.

https://archive.org/download/pup4.311gl ... ted%29.iso
Last edited by darry19662018 on Wed 07 Aug 2019, 07:04, edited 1 time in total.
Puppy Linux Wiki: [url]http://wikka.puppylinux.com/HomePage[/url]

[url]https://freemedia.neocities.org/[/url]

darry19662018
Posts: 721
Joined: Sat 31 Mar 2018, 08:01
Location: Rakaia
Contact:

#14 Post by darry19662018 »

My apologies to anybody who has downloaded earlier iso's they were missing
boot.cat
https://archive.org/download/pup4.311gl ... ted%29.iso
Puppy Linux Wiki: [url]http://wikka.puppylinux.com/HomePage[/url]

[url]https://freemedia.neocities.org/[/url]

User avatar
tallboy
Posts: 1760
Joined: Tue 21 Sep 2010, 21:56
Location: Drøbak, Norway

#15 Post by tallboy »

My 2002 Dell Optiplex GX240 would not boot at all. It is connected to a 2009 widescreen HP 22", would that be too new for the 4.31?
I'll burn the latest iso, and try again.
True freedom is a live Puppy on a multisession CD/DVD.

darry19662018
Posts: 721
Joined: Sat 31 Mar 2018, 08:01
Location: Rakaia
Contact:

#16 Post by darry19662018 »

thanks Tallboy checking into this usually I manually frugally install my iso's - I'll use unetbootin and check this out. :oops:
Puppy Linux Wiki: [url]http://wikka.puppylinux.com/HomePage[/url]

[url]https://freemedia.neocities.org/[/url]

darry19662018
Posts: 721
Joined: Sat 31 Mar 2018, 08:01
Location: Rakaia
Contact:

#17 Post by darry19662018 »

See first post and post below...
Puppy Linux Wiki: [url]http://wikka.puppylinux.com/HomePage[/url]

[url]https://freemedia.neocities.org/[/url]

darry19662018
Posts: 721
Joined: Sat 31 Mar 2018, 08:01
Location: Rakaia
Contact:

#18 Post by darry19662018 »

Hi guys,

I have rebuilt the iso and posted ammended link in the first post.

I used Scottman's woofy 0.91 and tested by booting a fresh boot with no savefile in unetbootin which successfully booted and tested programs and all seems well this time. Unfortunately I don't have the ability to test and burn a live cd..

I will also create a folder at the archive.org site so that if you want to do a 4.31 upgrade with glibc 2.19 yourself you can.

My apologies to all who did live-cd's that didn't work - I am very sorry this happened. I have removed the previous iso's.
Puppy Linux Wiki: [url]http://wikka.puppylinux.com/HomePage[/url]

[url]https://freemedia.neocities.org/[/url]

darry19662018
Posts: 721
Joined: Sat 31 Mar 2018, 08:01
Location: Rakaia
Contact:

#19 Post by darry19662018 »

Hi guys again,

Right I have uploaded all the files needed for a glibc2.19 upgrade of 4,31.
here: https://archive.org/download/pup4.311gl ... 794sserev1

Browsers are accessed from jwm menu.



Instructions for doing your own upgrade:

1. Most important for the upgrade to work there is a text file called profile this should be copied to /etc this will replace /etc/profile it contains the following line..

export LC_ALL=C

2. All the lib files should be copied to /usr/lib - especially if you are wanting to run the updated psip which requires libcrypto.so 1 and libssl.so.1

Libreadline is important for a correctly working frisbee as well upgrade dhcp and wpasupplicant. Dbus and Dbus-glib are important for working browsers.
Puppy Linux Wiki: [url]http://wikka.puppylinux.com/HomePage[/url]

[url]https://freemedia.neocities.org/[/url]

watchdog
Posts: 2021
Joined: Fri 28 Sep 2012, 18:04
Location: Italy

#20 Post by watchdog »

I don't like remastering. Make a savefile with your customizations and make an iso file including that savefile into the iso with mkisofs. Boot the iso with option "puppy pfix=ram". Copy the savefile on the hd from the iso and make your frugal install and you are done. You can easily fit the savefile for your hardware.
Another way is to extract the content of the main sfs, copy manually the possibly few new packages into it and rebuild it. At last rebuild the iso with mkisofs.

Edit: recent puppies have built-in isomaster.
Last edited by watchdog on Sat 10 Aug 2019, 10:05, edited 1 time in total.

Post Reply