Upup Precise 3.7.2 with kernel 3.7.2, no pae
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
Hi,
this might be indicative ...
on a Dell620 laptop running idle in POWERSAVE mode, screenshot combination of the tempicon shows 20°C temperature difference between uPup54X7 and uPup3.7.2.
this might be indicative ...
on a Dell620 laptop running idle in POWERSAVE mode, screenshot combination of the tempicon shows 20°C temperature difference between uPup54X7 and uPup3.7.2.
- Attachments
-
- CPUtempk3.7.2vsk3.2.29_idle.jpg
- (16.36 KiB) Downloaded 1428 times
New frisbee announced
Rerwin has announced a new version of "integrated frisbee" for testing at:
http://murga-linux.com/puppy/viewtopic. ... &start=108
For some reason? the pop-ups display at different parts of the screen in Upup Precise as compared to Precise 5.4.3 or Slacko 5.4? Anybody know why this might be?
Some of the components are already in Upup Precise 3.7.2 from an earlier less developed release - but to be safe all of the new components should be loaded.
Cheers
peebee
http://murga-linux.com/puppy/viewtopic. ... &start=108
For some reason? the pop-ups display at different parts of the screen in Upup Precise as compared to Precise 5.4.3 or Slacko 5.4? Anybody know why this might be?
Some of the components are already in Upup Precise 3.7.2 from an earlier less developed release - but to be safe all of the new components should be loaded.
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Upup Precise 3.7.2 with kernel 3.7.2, no pae
I did a manual frugal install to the hard drive.
I installed your amd_fglrx_catalyst-legacy-12.6-k3.7.2-upup.pet
VIDEO REPORT: Upup Precise, version 3.7.2
Chip description:
oem: ATI ATOMBIOS
product: RS780 01.00
Requested by /etc/X11/xorg.conf:
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Drivers requested to be loaded: fglrx
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): fglrx
Loaded modules: amdxmm dbe ddc dri dri2 extmod fb fglrxdrm glesx glx kbd
mouse ramdac record vbe vgahw
Actual rendering on monitor:
Resolution: 1440x900 pixels (380x238 millimeters)
Depth: 24 planes
OpenGL
Vendor ATI Technologies Inc.
Renderer ATI Radeon HD 3200 Graphics
Version 3.3.11653 Compatibility Profile Context
Direct Rendering Yes
# glxgears
19537 frames in 5.0 seconds = 3907.197 FPS
19552 frames in 5.0 seconds = 3910.321 FPS
19574 frames in 5.0 seconds = 3914.723 FPS
Computer
Processor 4x AMD Phenom(tm) II X4 810 Processor
Memory 3374MB (235MB used)
Linksys WUSB54GC v1 802.11g Adapter [Ralink RT73]
It's working well so far.
I installed your amd_fglrx_catalyst-legacy-12.6-k3.7.2-upup.pet
VIDEO REPORT: Upup Precise, version 3.7.2
Chip description:
oem: ATI ATOMBIOS
product: RS780 01.00
Requested by /etc/X11/xorg.conf:
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Drivers requested to be loaded: fglrx
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): fglrx
Loaded modules: amdxmm dbe ddc dri dri2 extmod fb fglrxdrm glesx glx kbd
mouse ramdac record vbe vgahw
Actual rendering on monitor:
Resolution: 1440x900 pixels (380x238 millimeters)
Depth: 24 planes
OpenGL
Vendor ATI Technologies Inc.
Renderer ATI Radeon HD 3200 Graphics
Version 3.3.11653 Compatibility Profile Context
Direct Rendering Yes
# glxgears
19537 frames in 5.0 seconds = 3907.197 FPS
19552 frames in 5.0 seconds = 3910.321 FPS
19574 frames in 5.0 seconds = 3914.723 FPS
Computer
Processor 4x AMD Phenom(tm) II X4 810 Processor
Memory 3374MB (235MB used)
Linksys WUSB54GC v1 802.11g Adapter [Ralink RT73]
It's working well so far.
- Attachments
-
- screenshot.jpg
- (75.03 KiB) Downloaded 1314 times
G'day charlie6,
I too saw quite different temperatures reported by the task-bar tempicon between different Pups on my desktop.
But one day, I right-clicked the tempicon to see 'More Info' and found temperatures were being reported for different computer elements - one Pup tempicon was reporting CPU (e.g. 35C), another Pup's tempicon was the graphics card temperature (e.g. 60C).
The 'More Info' shows all the temperatures so you can see which is ending up as the Pup's task bar icon.
Once I found this was happening, the differences between the same part for different Pups were much less.
Maybe there needs to be more icons (temperatures) displayed, maybe colour-coded for the different bits?
David S.
I too saw quite different temperatures reported by the task-bar tempicon between different Pups on my desktop.
But one day, I right-clicked the tempicon to see 'More Info' and found temperatures were being reported for different computer elements - one Pup tempicon was reporting CPU (e.g. 35C), another Pup's tempicon was the graphics card temperature (e.g. 60C).
The 'More Info' shows all the temperatures so you can see which is ending up as the Pup's task bar icon.
Once I found this was happening, the differences between the same part for different Pups were much less.
Maybe there needs to be more icons (temperatures) displayed, maybe colour-coded for the different bits?
David S.
Upup Precise 3.7.2 with kernel 3.7.2, no pae
@pemasu
I made and tested pets of the newest Midnight Commander file manager and it's
dependency Slang in Upup 472, mc is working well for me but needs the
devx installed to unpack zip files.
I made and tested pets of the newest Midnight Commander file manager and it's
dependency Slang in Upup 472, mc is working well for me but needs the
devx installed to unpack zip files.
Upup Precise 3.7.2 with kernel 3.7.2, no pae
Running from live dvd with a savefile on intel imac.
VIDEO REPORT: Upup Precise, version 3.7.2
Chip description:
oem: ATI ATOMBIOS
product: M74 01.00
Requested by /etc/X11/xorg.conf:
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Drivers requested to be loaded: fglrx
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): fglrx
Loaded modules: amdxmm dbe ddc dri dri2 extmod fb fglrxdrm glesx glx
kbd mouse ramdac record vbe vgahw
Actual rendering on monitor:
Resolution: 1680x1050 pixels (444x277 millimeters)
Depth: 24 planes
OpenGL
Vendor ATI Technologies Inc.
Renderer ATI Mobility Radeon HD 2400 XT
Version 3.3.11653 Compatibility Profile Context
Direct Rendering Yes
# glxgears
24764 frames in 5.0 seconds = 4952.728 FPS
25179 frames in 5.0 seconds = 5035.719 FPS
25190 frames in 5.0 seconds = 5037.968 FPS
Computer
Processor 2x Intel(R) Core(TM)2 Duo CPU E8135 @ 2.40GHz
Memory 3095MB (201MB used)
Network controller Broadcom Corporation BCM4321 802.11a/b/g/n (rev 05)
Your ati legacy pet is working well on this imac too.
I made a htop version 1.0.2 pet if you want it.
VIDEO REPORT: Upup Precise, version 3.7.2
Chip description:
oem: ATI ATOMBIOS
product: M74 01.00
Requested by /etc/X11/xorg.conf:
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Drivers requested to be loaded: fglrx
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): fglrx
Loaded modules: amdxmm dbe ddc dri dri2 extmod fb fglrxdrm glesx glx
kbd mouse ramdac record vbe vgahw
Actual rendering on monitor:
Resolution: 1680x1050 pixels (444x277 millimeters)
Depth: 24 planes
OpenGL
Vendor ATI Technologies Inc.
Renderer ATI Mobility Radeon HD 2400 XT
Version 3.3.11653 Compatibility Profile Context
Direct Rendering Yes
# glxgears
24764 frames in 5.0 seconds = 4952.728 FPS
25179 frames in 5.0 seconds = 5035.719 FPS
25190 frames in 5.0 seconds = 5037.968 FPS
Computer
Processor 2x Intel(R) Core(TM)2 Duo CPU E8135 @ 2.40GHz
Memory 3095MB (201MB used)
Network controller Broadcom Corporation BCM4321 802.11a/b/g/n (rev 05)
Your ati legacy pet is working well on this imac too.
I made a htop version 1.0.2 pet if you want it.
- Attachments
-
- htop-1.0.2-i686.pet
- (57.28 KiB) Downloaded 400 times
Upup Precise 3.7.2 with kernel 3.7.2, no pae
I made a pet of cmus music player in upup 372.
The link below is to a tutorial on using cmus.
http://www.tuxarena.com/static/cmus_guide.php
The link below is to a tutorial on using cmus.
http://www.tuxarena.com/static/cmus_guide.php
- Attachments
-
- cmus-v2.5.0-i686.pet
- (194.58 KiB) Downloaded 399 times
-
- cmus.scrn.jpg
- (73.31 KiB) Downloaded 1136 times
I notice the default gtk-theme is buggy, well at least for puppy use. We came across this bug in Lupu development. When you right click a tray icon it executes the bottom entry straight away unless you hold the right click.
Should be easy to confirm.
HTH
Should be easy to confirm.
HTH
Puppy Linux Blog - contact me for access
No wireless with Precise 3.7.2 The RT2500PCI is listed under
hardware detected but it doesn't work. I tried selecting it and
I also tried Ndiswrapper with my Windows .inf file and driver.
I don't know what to try next. This is the first Pup that's given
me this kind of total failure. There's no wlan0 available at all.
Art
hardware detected but it doesn't work. I tried selecting it and
I also tried Ndiswrapper with my Windows .inf file and driver.
I don't know what to try next. This is the first Pup that's given
me this kind of total failure. There's no wlan0 available at all.
Art
Ok pemasu. I've attached the requested file.
Art
Art
- Attachments
-
- pdiag-20130120.tar.gz
- Relating to wireless failure.
- (121.05 KiB) Downloaded 381 times
artsown.
But something is wrong with that module.
You could check that the wireless is not blocked.
In console something like this:
rfkill unblock all
rmmod rt2500pci
modprobe rt2500pci
Probably wont help, but you can try.
there is failure with rt2500pci kernel module. It does not initialize your wireless hardware. The reason to that is unkown atm.[ 95.250346] phy0 -> rt2x00lib_probe_dev: Error - Failed to initialize hw.
[ 95.250411] rt2500pci: probe of 0000:02:0a.0 failed with error -22
But something is wrong with that module.
You could check that the wireless is not blocked.
In console something like this:
rfkill unblock all
rmmod rt2500pci
modprobe rt2500pci
Probably wont help, but you can try.
-
- Posts: 361
- Joined: Fri 27 May 2011, 17:21
- Location: Reading UK
Hello Pemasu
The vlc-2.0.5_two_flower.pet may be broken. When I tried to install it I got: error:failed to install. I tried re-downloading and checking the size but they were the same.
The good news is that I installed XBMC-XVBA 12.0 RC3 from the PPA on Launchpad and it worked at the first attempt. But I had installed libmysqlclient.so.18 first!
XVBA works with your ATI 12.6 Legacy driver.
------
One change I have noticed, with this kernel, is that the AMD K10 frequency scaling driver is in acpi-cpufreq and not in powernow-k8. So acpi-cpufreq loads by default and works correctly. powernow-k8 will not load.
Thank you for your work on this Puppy.
The vlc-2.0.5_two_flower.pet may be broken. When I tried to install it I got: error:failed to install. I tried re-downloading and checking the size but they were the same.
The good news is that I installed XBMC-XVBA 12.0 RC3 from the PPA on Launchpad and it worked at the first attempt. But I had installed libmysqlclient.so.18 first!
XVBA works with your ATI 12.6 Legacy driver.
------
One change I have noticed, with this kernel, is that the AMD K10 frequency scaling driver is in acpi-cpufreq and not in powernow-k8. So acpi-cpufreq loads by default and works correctly. powernow-k8 will not load.
Thank you for your work on this Puppy.
drivers
I was visiting a school lab with new PCs, many of which have broken Win$, and this build handled the wireless connections easily. Sorry to hear about artsown's problem.
Thanks, Pemasu!
Thanks, Pemasu!
Puppy user since Oct 2004. Want FreeOffice? [url=http://puppylinux.info/topic/freeoffice-2012-sfs]Get the sfs (English only)[/url].
LateAdopter. Ok. I edited my post. the upload has been broken. It was only about 7 Mb when the original vlc pet was 19 Mb. This vlc is Ubuntu original with all needed libs.
There is also Precise Puppy compiled version which is only 5 Mb in size. But it has worked just fine for me. The size difference of Ubuntu canonical version and Precise Puppy compiled is remarkable.
http://www.smokey01.com/pemasu/pet_pack ... recise.pet
Thanks Raffy of your feedback with wireless.
There is also Precise Puppy compiled version which is only 5 Mb in size. But it has worked just fine for me. The size difference of Ubuntu canonical version and Precise Puppy compiled is remarkable.
http://www.smokey01.com/pemasu/pet_pack ... recise.pet
Thanks Raffy of your feedback with wireless.
Last edited by pemasu on Mon 21 Jan 2013, 15:16, edited 1 time in total.
Concerning lack of wireless, I was reminded of the power
management bug in some 3.X kernels that makes wireless
unreliable with some hardware. So I played with booting
with acpi=off and also tried disabling acpid (and then
loading the rt2500pci driver). Nothing I try has any effect.
Also, it's peculiar that when I try ndiswrapper and my
Windows .inf and driver I see a error message claiming
there is no ndiswrapper. A file search certainly finds all
kinds of ndiswrapper stuff in the file system. So what gives
here?
Searching the internet hasn't turned up any clues so far
either.
Art
management bug in some 3.X kernels that makes wireless
unreliable with some hardware. So I played with booting
with acpi=off and also tried disabling acpid (and then
loading the rt2500pci driver). Nothing I try has any effect.
Also, it's peculiar that when I try ndiswrapper and my
Windows .inf and driver I see a error message claiming
there is no ndiswrapper. A file search certainly finds all
kinds of ndiswrapper stuff in the file system. So what gives
here?
Searching the internet hasn't turned up any clues so far
either.
Art
Artsown. There is no ndiswrapper for this kernel. I couldnt get it to compile. I got errors which I couldnt resolve. I havent much tried again though.
The error message has been different than in this fix:
http://www.murga-linux.com/puppy/viewto ... 311#671311
And I suppose you have tried that one also.
The error message has been different than in this fix:
http://www.murga-linux.com/puppy/viewto ... 311#671311
And I suppose you have tried that one also.