quickpet_precise 2

Core libraries and systems
Message
Author
User avatar
666philb
Posts: 3615
Joined: Sun 07 Feb 2010, 12:27
Location: wales ... by the sea

#91 Post by 666philb »

hi april

librecad works on a fresh install with the qt4 sfs from quickpet.
seems you might have installed a pet that has conflicting qt4 libs, any idea what?
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331

april

#92 Post by april »

Probably Phil but doesn't the new pet from quickpet overwrite the existing entries? It does not give any errors when downloading the QT4 package and saves it as an .sfs file which seems to then get loaded . I Unloaded and reloaded without changing the result .

I can delete the existing .sfs and download the new one without changing the result also so I'm wondering what else I can do to find the problem . Are you absolutely sure it loads OK on a new install ?
You have actually done that yes?

I have an AMD chip and I am wondering if that might affect it in any way differently to other chips . That has been known before. I have a lot of extra stuff in my save file so starting a new one is not what I want to do but maybe I'll try that with a basic load with pfix and save the result in a special savefile

User avatar
666philb
Posts: 3615
Joined: Sun 07 Feb 2010, 12:27
Location: wales ... by the sea

#93 Post by 666philb »

it's this a frugal install?
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331

april

#94 Post by april »

Yes it is Phil . I am trying a fresh install with puppy pfix=ram atm
Don't remember the QT4 package taking so long to download so maybe the QT downloader was finding it on my machine and not downloading it at all and not telling me .
Last edited by april on Wed 02 Dec 2015, 21:13, edited 1 time in total.

User avatar
666philb
Posts: 3615
Joined: Sun 07 Feb 2010, 12:27
Location: wales ... by the sea

#95 Post by 666philb »

make sure to install the quickpet from the first post
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331

april

#96 Post by april »

OK confirm it works OK with pfix=ram and now I can use it thanks .

I'll go back and delete the .sfs again and try to download it again and see if that fixes my main savefile

Nah did that and the problem persists. I suppose it must be something linked to the QT package but outside of the .sfs file .

Perhaps someone with a deeper understanding of the QT4 package might help me out here?

User avatar
666philb
Posts: 3615
Joined: Sun 07 Feb 2010, 12:27
Location: wales ... by the sea

#97 Post by 666philb »

april wrote:OK confirm it works OK with pfix=ram and now I can use it thanks .

I'll go back and delete the .sfs again and try to download it again and see if that fixes my main savefile

Nah did that and the problem persists. I suppose it must be something linked to the QT package but outside of the .sfs file .

Perhaps someone with a deeper understanding of the QT4 package might help me out here?
the problem is likely to be a pet you've installed that has mismatching qt4 libs
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331

april

#98 Post by april »

Thanks I'm still looking for it .
Master PDF Editor now does not start and reports the same symbol missing.

Code: Select all

 ./masterpdfeditor
# ./masterpdfeditor3
./masterpdfeditor3: symbol lookup error: /usr/lib/libQtNetwork.so.4: undefined symbol: _ZN16QIODevicePrivate4peekEPcx
# 


april

#99 Post by april »

Phil the version you have is very old . This is the problem 1.0.1 Feb 2012 and various helpful changes have been made since then.

Any chance of an update ?
Its in the ubuntu-precise-main but thats the old version

From their page
LibreCAD is available in the main repository of Debian 7.0 (Wheezy) and later as "librecad". Use your favorite package manager (e.g. aptitude, synaptic, etc.) or simply:

# apt-get install librecad

will install and configure it for you for every architecture. You can always find the latest release in Debian unstable.

If you are not running unstable/sid, and still want to upgrade LibreCAD to a newer version in unstable/sid, you may download the LibreCAD debs from Debian unstable, and manually install them in your system by "dpkg -i",

# dpkg -i /path/to/librecad_1.0.0~rc3+nolibs-1_i386.deb

# dpkg -i /path/to/librecad-data_1.0.0~rc3+nolibs-1_i386.deb

and rpm packages here

https://github.com/Rallaz/LibreCAD/wiki/Rpm-packages

Its up to 2.0.7 and 1.0.3

april

#100 Post by april »

Phil if you could give me a brief intro into how you do it I would be happy to do the work

User avatar
666philb
Posts: 3615
Joined: Sun 07 Feb 2010, 12:27
Location: wales ... by the sea

#101 Post by 666philb »

updated librecad in quickpet

you'll have to se if it works properly as it's trustys version
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331

april

#102 Post by april »

Thanks Phil - A true gentleman.
Works fine
LibreCAD
Version: master
SCM Revision: 2.1.0
Compiler: GNU GCC 4.8.4
Qt Version: 4.8.2
Compiled on: Dec 18 2015
Portions (c) 2011 by R. van Twisk
Program Icons Supplied by
Pablo: LibreCAD Argentine
Splash and Logo supplied by
Diego Daltom Designer

Modules: Align, Read ascii points, Import ESRI Shapefile, List entities, Same properties, Sample plugin
Makes a great difference in that you can have more than one grid snap "on" at a time
That was really slowing things down .
Did not change anything else .

Simply updated quickpet and then chose Librecad .

Offer stands , if I can help with anything just ask.

april

#103 Post by april »

Hey Phil

Is there a quickpet for 64 bit machines?
Say fatdog O/S?

Any plans to do one . Brilliant tool.

User avatar
666philb
Posts: 3615
Joined: Sun 07 Feb 2010, 12:27
Location: wales ... by the sea

#104 Post by 666philb »

april wrote:Hey Phil

Is there a quickpet for 64 bit machines?
Say fatdog O/S?

Any plans to do one . Brilliant tool.
tahrpup64 has quickpet
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331

april

#105 Post by april »

A while back I had a conflict with Q4 packages and mentioned it here I think .I noticed I downloaded VLC via Quickpet just now and it asks you to install the Q4 packages again.

This time I did not do so and the program seems to run as expected regardless. I'm wondering if the message to download Q4 libraries is necessary and perhaps installs a different, conflicting version?

april

#106 Post by april »

Hi Phil .
I wondered if you could put gMTP on Quickpet Precise .

I've been downloading source files and trying to compile for days now and it just seems to always need something else .

gMTP is very handy for Android phones versions 4 on to open them up for file saving and transfers etc. I expect it would also be useable on iPhones but don't know anything about that. The camera programs in Puppy often don't work properly for version 4 onwards.

There is a thread on it here
http://murga-linux.com/puppy/viewtopic.php?t=91442 but I have not pawed through it yet but I think I got a working pet package from here before.

User avatar
666philb
Posts: 3615
Joined: Sun 07 Feb 2010, 12:27
Location: wales ... by the sea

#107 Post by 666philb »

have you tried mtp_ phone _ connect ..... in the slacko repo http://distro.ibiblio.org/puppylinux/pe ... acko14/you
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331

april

#108 Post by april »

There are two and a DEV file . I tried all three but none of them installed.

User avatar
rockedge
Posts: 1864
Joined: Wed 11 Apr 2012, 13:32
Location: Connecticut, United States
Contact:

#109 Post by rockedge »

I have success connecting to iPod, iPad and Android (CyangenMod) using CamPhoneTab 1.5. Would this be a solution?
http://www.murga-linux.com/puppy/viewtopic.php?t=102321

april

#110 Post by april »

I finally got a gmtp application to run in puppy . Its very slow though
http://packages.ubuntu.com/precise/i386/gmtp/download

Post Reply