TouchPad Tap lässt sich nicht abschalten

Post Reply
Message
Author
Emperor
Posts: 29
Joined: Wed 19 Sep 2012, 18:11

TouchPad Tap lässt sich nicht abschalten

#1 Post by Emperor »

Hallo,
Ich brauch euren rat, warum lässt sich dieser miese Tap2click nicht abschalten?
Ich hab Puppy 4.3.1(voll installation) und Die Xconf sieht so aus wie sie sein soll.Auch im wizzard ist die funktion abgeschaltet.
Flsynclient weigert sich zu starten -->shm config ist an
Der versuch den synaptics 1.1.3 treiber zu installieren scheitert daran das mein Puppy die :?: XI :?: nicht findet.

aber daran sollte es ja nicht liegen, es scheint als würde das ding die komplette datei komplett ignorieren.

Ich tu jetzt schon seit 2 monate rum und kom nicht weiter
#Special base config file used in Puppy Linux.

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
Load "synaptics"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the font modules
Load "type1"
Load "freetype"

# This loads xtrap extension, used by xrandr
Load "xtrap"

# This loads the GLX module (if present)
Load "glx"

# This loads dri module (if present)
Load "dri"

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R7/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)

FontPath "/usr/X11R7/lib/X11/fonts/misc/"
FontPath "/usr/X11R7/lib/X11/fonts/Type1/"
FontPath "/usr/X11R7/lib/X11/fonts/TTF/"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.

# Option "DontVTSwitch"

# Enables mode switching with xrandr
# There is a report that this can cause Xorg not to work on some
# video hardware, so default is commented-out...
# but i want to use it in xorgwizard so leave on...

Option "RandR" "on"

EndSection

#everything past here is auto-generated by Puppy's Xorg Wizard...


Section "ServerLayout"
InputDevice "Synaptics Mouse" "AlwaysCore"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc102"
Option "XkbLayout" "de" #xkeymap0
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2" #mouse0protocol
Option "Device" "/dev/mouse"
#Option "Emulate3Buttons"
#Option "Emulate3Timeout" "50"
#Option "ZAxisMapping" "4 5" #scrollwheel
EndSection

Section "InputDevice"
Identifier "Synaptics Mouse"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "0"
Option "MaxTapMove" "0"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.10"
Option "MaxSpeed" "0.30"
Option "AccelFactor" "0.0030"
Option "SHMConfig" "on"
#Option "Repeater" "/dev/ps2mouse"
Option "TapButton1" "0"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 31.5-37
VertRefresh 40-70
#UseModes "Modes0" #monitor0usemodes
Option "PreferredMode" "800x600"
EndSection

Section "Modes"
Identifier "Modes0"
#modes0modeline0
EndSection

Section "Device"
# Available Driver options are:-
# Values: <i>: integer, <f>: float, <bool>: "True"/"False",
# <string>: "String", <freq>: "<f> Hz/kHz/MHz"
# [arg]: arg optional
#Option "pci_burst" # [<bool>]
#Option "fifo_conservative" # [<bool>]
#Option "fifo_moderate" # [<bool>]
#Option "fifo_aggressive" # [<bool>]
#Option "pci_retry" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "set_mclk" # <freq>
#Option "show_cache" # [<bool>]
#Option "HWCursor" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "ByteSwap" # [<bool>]
#Option "Interlaced" # [<bool>]
#Option "UseBIOS" # [<bool>]
#Option "ZoomOnLCD" # [<bool>]
#Option "Dualhead" # [<bool>]
#Option "AccelMethod" # <str>
Identifier "Card0"
Driver "siliconmotion" #card0driver
VendorName "Silicon Motion, Inc."
BoardName "SM712 LynxEM+"
BusID "PCI:0:2:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "800x600"
EndSubsection
EndSection

#PuppyHardwareProfile=Silicon_Motion_SM712

deepsea
Posts: 154
Joined: Sat 17 Jan 2009, 21:51
Location: Deutschland

#2 Post by deepsea »

Moin Emperor

Tja die Einstellungen in der Xorg.conf sind wohl richtig,
und gesucht hast du ja auch schon genug.
Ich vermute die Einstellungen werden überschrieben.

EDIT: oder du benutzt den XVESA MODE :?:

Falls doch Xorg dann
( 2'ter Link 2'ter Post wenn du Xorg full installiert hast)


Aber eins interessiert mich schon:
Emperor wrote: and i MUST disable the tap..........this useless function killed almost my Car engine
Warum killt die Funktion irgend etwas ?



Evt. Bekommst du hier ja eine Idee ?

siehe:
SynapticsTouchpad/ShortcutKey

oder:
Abdschalten des Touchpad wenn Tasten aktiv

Post Reply