Mypaint 1.1.0 precise
hi fabio t,
it's not python that's conficting, it's some libs in the bluetooth pet........ i haven't got bluetooth so can't test...
here's a pet to try, uninstall the old one first http://dl.dropbox.com/u/19554672/blueto ... st_fix.pet
it removes some libs that conflict with mypaint, but the whole .pet could do with updating. if bluetooth still works with the test pet, i'll try and update the whole thing.
it's not python that's conficting, it's some libs in the bluetooth pet........ i haven't got bluetooth so can't test...
here's a pet to try, uninstall the old one first http://dl.dropbox.com/u/19554672/blueto ... st_fix.pet
it removes some libs that conflict with mypaint, but the whole .pet could do with updating. if bluetooth still works with the test pet, i'll try and update the whole thing.
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Thank you very much 666philb,
I've downloaded your .pet and try a few test to try different configuration of Precise with Mypaint.
There are several suprises!
In fact your package don't prevent Mypaint to work, but Mypaint don't work for me because don't find his icons...
Tomorrow I'll tell you the test on Precise and results, stange results!
What are files and libraries different between Your file and the original? In this differences are the answers to my install problems.
I've downloaded your .pet and try a few test to try different configuration of Precise with Mypaint.
There are several suprises!
In fact your package don't prevent Mypaint to work, but Mypaint don't work for me because don't find his icons...
Tomorrow I'll tell you the test on Precise and results, stange results!
What are files and libraries different between Your file and the original? In this differences are the answers to my install problems.
666philb wrote:hi fabio t,
it's not python that's conficting, it's some libs in the bluetooth pet........ i haven't got bluetooth so can't test...
here's a pet to try, uninstall the old one first http://dl.dropbox.com/u/19554672/blueto ... st_fix.pet
it removes some libs that conflict with mypaint, but the whole .pet could do with updating. if bluetooth still works with the test pet, i'll try and update the whole thing.
Ok, I'm back.
Description of strange abearance of PC & mypaint & bluetooth:
Restart Precise from scratch.
Reboot Precise pfix=ram.
Setup language and create a new precisesave.4fs
Reboot
In BootManager config bootup: load mypaint.1.1.0.sfs
Reboot.
Launch in terminal window (rxvt) : mypaint (enter)
Mypaint don't launch and complains that cannot find his icons.
Install Bluetooth.0.5.fix.pet (my file).
Launch in terminal window (rxvt) : mypaint (enter)
Mypaint don't launch and complains several Python errors.
But Bluetooth icon appears in the status bottom bar.
Uninstall Bluetooth 0.5.
Reboot.
Launch in terminal window (rxvt) : mypaint (enter)
Mypaint WORKS! Icons founded!
But Bluetooth don't works.
Now I Install Bluetooth.0.5.test.fix.pet (your file)
Reboot
Bluetooth WORKS and MYPAINT WORKS!
Bluetooth icon appears in the status bottom bar.
Now I decide to try your file:
Restart from scratch.
Reboot Precise from Ram.
Setup language and create a new precisesave_1.4fs
Reboot.
In BootManager config bootup: load mypaint.1.1.0.sfs
Reboot.
Launch in terminal window (rxvt) : mypaint (enter)
Mypaint don't launch and complains that cannot find his icons.
Install Bluetooth.0.5.test.fix.pet (your file).
Launch in terminal window (rxvt) : mypaint (enter)
Mypaint don't launch and complains that cannot find his icons (NO MORE PYTHON ERRORS!)
And Bluetooth mouse works.
But Bluetooth icon don't appear in the status bottom bar; There is instead a white icon with a red cross inside.
It seems that bluetooth 0.5 (my file) sets correctly icon directory or path to icon directory.
What difference there is from two version of bluetooth.0.5 mine and yours?
Thank you for help.
Description of strange abearance of PC & mypaint & bluetooth:
Restart Precise from scratch.
Reboot Precise pfix=ram.
Setup language and create a new precisesave.4fs
Reboot
In BootManager config bootup: load mypaint.1.1.0.sfs
Reboot.
Launch in terminal window (rxvt) : mypaint (enter)
Mypaint don't launch and complains that cannot find his icons.
Install Bluetooth.0.5.fix.pet (my file).
Launch in terminal window (rxvt) : mypaint (enter)
Mypaint don't launch and complains several Python errors.
But Bluetooth icon appears in the status bottom bar.
Uninstall Bluetooth 0.5.
Reboot.
Launch in terminal window (rxvt) : mypaint (enter)
Mypaint WORKS! Icons founded!
But Bluetooth don't works.
Now I Install Bluetooth.0.5.test.fix.pet (your file)
Reboot
Bluetooth WORKS and MYPAINT WORKS!
Bluetooth icon appears in the status bottom bar.
Now I decide to try your file:
Restart from scratch.
Reboot Precise from Ram.
Setup language and create a new precisesave_1.4fs
Reboot.
In BootManager config bootup: load mypaint.1.1.0.sfs
Reboot.
Launch in terminal window (rxvt) : mypaint (enter)
Mypaint don't launch and complains that cannot find his icons.
Install Bluetooth.0.5.test.fix.pet (your file).
Launch in terminal window (rxvt) : mypaint (enter)
Mypaint don't launch and complains that cannot find his icons (NO MORE PYTHON ERRORS!)
And Bluetooth mouse works.
But Bluetooth icon don't appear in the status bottom bar; There is instead a white icon with a red cross inside.
It seems that bluetooth 0.5 (my file) sets correctly icon directory or path to icon directory.
What difference there is from two version of bluetooth.0.5 mine and yours?
Thank you for help.
hi fabio t
the only difference is i removed two libs from my .pet 'libxcb-xlib.so.0.0.0' and 'libxcb.so.1.1.0' the tashbar icon shouldn't be affected .... did you try rebooting?
as i said there are more libs in the bluetooth pet that conflict with and overwrite precises own libs. i'll try and post a precise version of the bluetooth pet for you to test this week sometime.
cheers
the only difference is i removed two libs from my .pet 'libxcb-xlib.so.0.0.0' and 'libxcb.so.1.1.0' the tashbar icon shouldn't be affected .... did you try rebooting?
as i said there are more libs in the bluetooth pet that conflict with and overwrite precises own libs. i'll try and post a precise version of the bluetooth pet for you to test this week sometime.
cheers
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
> > > S O L V E D ! ! ! < < <
After several tries I've found problem core.
It's bad indexed icon cache.
Initially I followed instructions in site https://gna.org/bugs/?18460.
But file 'icon-theme.cache' isn't in /usr/local/share/icons/hicolor but is in /usr/share/icons/hicolor !
Then it's only sufficient to modify and launch this command from command line:
gtk-update-icon-cache -tf /usr/share/icons/hicolor
It reindexs mypaint icons (and bluetooth icon that reappears after restart X)
After this command mypaint 1.1.0 works correctly.
If you can create a precise bluetooth adapted file I thank you very much.
I enclose here file application.py with modified message.
To use quickly, copy it in /usr/share/mypaint/gui
If anyone wants it is possible to recompile .sfs file with this new file
After several tries I've found problem core.
It's bad indexed icon cache.
Initially I followed instructions in site https://gna.org/bugs/?18460.
But file 'icon-theme.cache' isn't in /usr/local/share/icons/hicolor but is in /usr/share/icons/hicolor !
Then it's only sufficient to modify and launch this command from command line:
gtk-update-icon-cache -tf /usr/share/icons/hicolor
It reindexs mypaint icons (and bluetooth icon that reappears after restart X)
After this command mypaint 1.1.0 works correctly.
If you can create a precise bluetooth adapted file I thank you very much.
EDIT: I've enclose my hint in software.666philb wrote:hi fabio t
the only difference is i removed two libs from my .pet 'libxcb-xlib.so.0.0.0' and 'libxcb.so.1.1.0' the tashbar icon shouldn't be affected .... did you try rebooting?
as i said there are more libs in the bluetooth pet that conflict with and overwrite precises own libs. i'll try and post a precise version of the bluetooth pet for you to test this week sometime.
cheers
I enclose here file application.py with modified message.
To use quickly, copy it in /usr/share/mypaint/gui
If anyone wants it is possible to recompile .sfs file with this new file
- Attachments
-
- application.py.zip
- (33.76 KiB) Downloaded 543 times
sfs loaded in my graphics suitcase
sfs loaded in my graphics suitcase
Mypaint is part of he brand new Vincent van Puppy (2016) released for our artists using Puppy
Based on upup Raring.
root# mypaint
ImportError: numpy.core.multiarray failed to import
Where is this machin ??? Pfind ne trouve pas.
Mypaint is part of he brand new Vincent van Puppy (2016) released for our artists using Puppy
Based on upup Raring.
root# mypaint
ImportError: numpy.core.multiarray failed to import
Where is this machin ??? Pfind ne trouve pas.
Mypaint dowloaded from PPM will not work.
don 570, that would meant that Mypaint dowloaded from PPM will not work.
I keep van pup because MyPaint intalls well, i did'nt check deeper, because i'm learning how to use it.
Quickpet in upup Raring does not load MyPaint, but drives you to this topic... strange. Perhaps they didn't succeed in compiling... did they ?
I keep van pup because MyPaint intalls well, i did'nt check deeper, because i'm learning how to use it.
Quickpet in upup Raring does not load MyPaint, but drives you to this topic... strange. Perhaps they didn't succeed in compiling... did they ?
Last edited by Pelo on Mon 02 May 2016, 00:07, edited 2 times in total.
is MyPaint woth the candle ? (Google)
is MyPaint worth the candle ? (Google). Don 570 tested it
"Good News!!
MyPaint 1.1 SFS works in Puplette and ToOpPy. " French forum will enjoy these news.
"Good News!!
MyPaint 1.1 SFS works in Puplette and ToOpPy. " French forum will enjoy these news.
- Attachments
-
- MyPaint.jpg
- MyPaint paints on Puppy 5.4.3 Precise.
- (91.46 KiB) Downloaded 182 times
Last edited by Pelo on Thu 28 Apr 2016, 09:29, edited 2 times in total.
Re: Mypaint dowloaded from PPM will not work.
Dear Pelo,Pelo wrote: Perhaps they didn't succeed in compiling... did they ?
Try this: http://www.smokey01.com/gjuhasz/package ... 1.1.1p.pet
Works fine. (I use it regularly in Puli with a Wacom tablet). Tested also in Tahr 6.0.5 under VirtualBox. The necessary Python packages (e.g., numpy) are included.
Have fun!
Regards,
gjuhasz
I am interested in discussing how to use graphics tools
Merci gjuhasz
yes yess yes all included. merci for that pet.. ah i must resize my pupsave..
I am interested a lot in discussing how to use theses graphics tools.So i am glad to meet a user as you.
Mypaint was the main interest of Van pup, the artist Puppy. I did a quick check of it
I have now a hundred of pictures taken during a Carnival for the city Newspaper. I will test Mypaint deeper.
installation postponed.... (precise 5.7.1)
MyPaint is not a Photo editor it's a painter. (tested with Vanpup) . So it's not really my hobby..
mypaint-1.1.0_sfs4.sfs: 51 M OK, See above Topic
yes yess yes all included. merci for that pet.. ah i must resize my pupsave..
I am interested a lot in discussing how to use theses graphics tools.So i am glad to meet a user as you.
Mypaint was the main interest of Van pup, the artist Puppy. I did a quick check of it
I have now a hundred of pictures taken during a Carnival for the city Newspaper. I will test Mypaint deeper.
installation postponed.... (precise 5.7.1)
MyPaint is not a Photo editor it's a painter. (tested with Vanpup) . So it's not really my hobby..
mypaint-1.1.0_sfs4.sfs: 51 M OK, See above Topic
Is "Tahrpup's" MyPaint 1.1.1p missing something ?
Hi All,
Note to self: Do not read pelo's posts first thing in the morning. Pelo has the annoying habit of "not letting sleeping dogs lie", which peeks my curiosity, compels me to try Pups and applications I wouldn't have known about; and screws up my plans for the day.
Installed gjuhasz's MyPaint-1.1.1p in Tahrpup 6.0.5. It opens and appears to be functional. MyPaint appears to be a graphics application well worth mastering as it provides tools I think are otherwise not available. Before working my way through the guides and tutorials, I decided to open MyPaint from the console to see if there were any problems.
Opening via the terminal generated the following information. I didn't have a drawing tablet attached, so would guess that explains
"Looking for GTK devices with pressure:
No pressure sensitive devices found.
device change: Core Pointer <enum GDK_SOURCE_MOUSE of type GdkInputSource>"
But is anything (else) a cause for concern? And, if so, can it be fixed?
root# mypaint
gtk-update-icon-cache: Cache file created successfully.
root# 0
Using GTK2
builtin python 2.6 json support
DEBUG: getlocale(): ('en_US', 'UTF-8')
DEBUG: localepath: /usr/share/locale
DEBUG: localepath_brushlib: /usr/share/locale
/usr/lib/python2.7/dist-packages/gobject/__init__.py:115: Warning: Attempt to add property ColorAdjusterWidget::color-manager after class was initialised
type_register(cls, namespace.get('__gtype_name__'))
/usr/lib/python2.7/dist-packages/gobject/__init__.py:115: Warning: Attempt to add property SliderColorAdjuster::vertical after class was initialised
type_register(cls, namespace.get('__gtype_name__'))
/usr/lib/python2.7/dist-packages/gobject/__init__.py:115: Warning: Attempt to add property DropdownPanelButton::panel-widget after class was initialised
type_register(cls, namespace.get('__gtype_name__'))
confpath = /root/.mypaint/
DEBUG: mode stack updated: <ModeStack [SwitchableFreehandMode]>
Traceback (most recent call last):
File "/usr/share/mypaint/gui/toolbar.py", line 755, in on_size_allocate
self._update()
File "/usr/share/mypaint/gui/toolbar.py", line 776, in _update
scaled_pixbuf = self._get_scaled_pixbuf(s)
File "/usr/share/mypaint/gui/toolbar.py", line 760, in _get_scaled_pixbuf
return theme.load_icon(gtk.STOCK_MISSING_IMAGE, size, 0)
glib.GError: Icon 'gtk-missing-image' not present in theme
Warning: setting "u'pressure_gain_log'" should be added to a group in brushsettingswindow.py
load_ora:
mimetype: image/openraster
data/background_tile.png
0.042s loading data/background_tile.png
Warning: Could not load any layer, document is empty.
0.048s load_ora total
Loaded scratchpad from /root/.mypaint/scratchpads/autosave.ora
Looking for GTK devices with pressure:
No pressure sensitive devices found.
device change: Core Pointer <enum GDK_SOURCE_MOUSE of type GdkInputSource>
Thanks in advance,
mikesLr
Note to self: Do not read pelo's posts first thing in the morning. Pelo has the annoying habit of "not letting sleeping dogs lie", which peeks my curiosity, compels me to try Pups and applications I wouldn't have known about; and screws up my plans for the day.
Installed gjuhasz's MyPaint-1.1.1p in Tahrpup 6.0.5. It opens and appears to be functional. MyPaint appears to be a graphics application well worth mastering as it provides tools I think are otherwise not available. Before working my way through the guides and tutorials, I decided to open MyPaint from the console to see if there were any problems.
Opening via the terminal generated the following information. I didn't have a drawing tablet attached, so would guess that explains
"Looking for GTK devices with pressure:
No pressure sensitive devices found.
device change: Core Pointer <enum GDK_SOURCE_MOUSE of type GdkInputSource>"
But is anything (else) a cause for concern? And, if so, can it be fixed?
root# mypaint
gtk-update-icon-cache: Cache file created successfully.
root# 0
Using GTK2
builtin python 2.6 json support
DEBUG: getlocale(): ('en_US', 'UTF-8')
DEBUG: localepath: /usr/share/locale
DEBUG: localepath_brushlib: /usr/share/locale
/usr/lib/python2.7/dist-packages/gobject/__init__.py:115: Warning: Attempt to add property ColorAdjusterWidget::color-manager after class was initialised
type_register(cls, namespace.get('__gtype_name__'))
/usr/lib/python2.7/dist-packages/gobject/__init__.py:115: Warning: Attempt to add property SliderColorAdjuster::vertical after class was initialised
type_register(cls, namespace.get('__gtype_name__'))
/usr/lib/python2.7/dist-packages/gobject/__init__.py:115: Warning: Attempt to add property DropdownPanelButton::panel-widget after class was initialised
type_register(cls, namespace.get('__gtype_name__'))
confpath = /root/.mypaint/
DEBUG: mode stack updated: <ModeStack [SwitchableFreehandMode]>
Traceback (most recent call last):
File "/usr/share/mypaint/gui/toolbar.py", line 755, in on_size_allocate
self._update()
File "/usr/share/mypaint/gui/toolbar.py", line 776, in _update
scaled_pixbuf = self._get_scaled_pixbuf(s)
File "/usr/share/mypaint/gui/toolbar.py", line 760, in _get_scaled_pixbuf
return theme.load_icon(gtk.STOCK_MISSING_IMAGE, size, 0)
glib.GError: Icon 'gtk-missing-image' not present in theme
Warning: setting "u'pressure_gain_log'" should be added to a group in brushsettingswindow.py
load_ora:
mimetype: image/openraster
data/background_tile.png
0.042s loading data/background_tile.png
Warning: Could not load any layer, document is empty.
0.048s load_ora total
Loaded scratchpad from /root/.mypaint/scratchpads/autosave.ora
Looking for GTK devices with pressure:
No pressure sensitive devices found.
device change: Core Pointer <enum GDK_SOURCE_MOUSE of type GdkInputSource>
Thanks in advance,
mikesLr
happy to meet people interested in editing pictures. Nice !
Rendez vous here There are simulteanous topics about My Paint. Topic linked has fourteen pages, perhaps we should join their team.
I am really happy to meet people interested in editing pictures. Nice !
I am really happy to meet people interested in editing pictures. Nice !
- kiramm
- Posts: 502
- Joined: Fri 06 May 2016, 05:00
- Location: http://murga-linux.com/puppy/viewtopic. ... 393#988393
Precise has a lot of pets
kiiram, Precise has a lot of pets, that is true.. Lucid too. The older the Puppy is, greater is the choice. Beware new Puppy Linux, some devs ask users to make pets themselves, ... they are supposed to be able to do it..
If you feel weak on linux language, sure our forum will provide you more pets for Precise version than for Slacko 6.3
For Mypaint, Vanpup has it included and a lot of libs which will make many apps running easily.
Vincent Van Pup 3992 , Greengeek version Check for ISO links.
If you feel weak on linux language, sure our forum will provide you more pets for Precise version than for Slacko 6.3
For Mypaint, Vanpup has it included and a lot of libs which will make many apps running easily.
Vincent Van Pup 3992 , Greengeek version Check for ISO links.
retour d'experience avec myPaint
Francophones, ecrire ici votre retour d'experience avec my Paint