(old)Puppy Linux Discussion Forum

quick update

got gnome mplayer working, but same problems as VLC 1.0.6

DC

DC. I am afraid you have screwed a little the setup with using Lucid VLC which has qt libs included.

I suggest starting from fresh install, installing that new dvb-update ( first remove that previous media folder ),
then install these:
http://www.smokey01.com/pemasu/pet_pack ... t-dpup.pet
http://www.smokey01.com/pemasu/pet_pack ... 1-dpup.pet
http://www.smokey01.com/pemasu/pet_pack ... s-dpup.pet
http://www.smokey01.com/pemasu/pet_pack ... -0.8.1.pet

Now you have dpup compliant setup of the applications and libs without interfering lucid stuff.
You can also use PPM which checks the dependencies...when you click check dependencies and it loads the needed depencies which are those above pets.

DC. If you mean that the dvb-tuner founds the stream, but freezes, then it sounds like the drivers are not working correctly and there is not much to do for it.

pemasu wrote:Anikin. It loads with modprobe eee for me and also creates /proc/eee and those files inside the /proc/eee it should.
So....I am clueless....

pemasu, I managed to get it loaded manually, but only once. Did first mod prob eeepc_laptop, and then modprob eee. It loaded, responded to commands, the folder was there. Rebooting and it's gone and modprob doesn't help anymore.

Anikin. Ok, something weird about eee.ko module happens. Not sure though what is the reason. For me it behaves nicely, though I dont try to use it. I fear what happens if it start to work, lol.
But I can modprobe and remove and modprobe it repeatitly.
Anyway....3.4.2 kernel version is the main dpup now...this is more or less experimental...where strange things happen...

"The truth is there...... Somewhere..."

I compiled the latest gtkdialog 0.8.2 in exprimo

It seems to work in other puppies

-------------------------------------------------

Don570. I do have gtkdialog in /usr/sbin. I changed the folder location to /usr/sbin and then I also stripped the binary.
I will use it now to test new Pmusic development version:
http://www.murga-linux.com/puppy/viewto ... 406#659406

I wrote this rightclick script to convert .ps file (postscript)
to pdf files.

I don't know if it's useful since I don't use ps
I believe it requires ps2pdf and ghostscript to be installed

Try it out for me. I tested it on Barry Kauler's reference file
that is included in every puppy.

___________________________________________

Don570. Ps2pdf do its job just fine. Thanks. I tes ted couple of more complex .ps files. Charlie6 with real need and demands would be best tester, but I am confirmed that I can add this rox right click to the build.

This is nice addition to the existing postscript_viewer rox right click addition which was previously hacked together by charlie6 and Shinobar. Using existing scripts with modifications.

http://www.murga-linux.com/puppy/viewto ... 441#615441

I just changed the .DirIcon to point to the existing .png

Thanks.

Hi Pemasu, and don570 ! thanks again to you !

your pet works nicely here on dpup-exprimo.

As I'm «addicted» to zero-paper-management , I am indeed used to daily handle native .ps documents which i can straight use for faxing (using efax-gtk); or which i may convert to png for editing; or pdf for mailing to customers, or archiving;

I also use sam2p for converting graphic formats, but it is one more program to be installed which i believe somewhat redundant with already-on-board binaries as pstopdf, pstopdfwr, etc..

Moreover the roght-click options dramaticaly speeds up the time to get them converted (till now i had to 1st) open a console and 2nd) manually convert using command line scripting and 3rd)..etc...)

for info: sam2p + right-click options here
http://www.murga-linux.com/puppy/viewtopic.php?t=32823

Charlie

Does Hardinfo show whether the kernel was gen'd with KVM active?

Thanks in advance

I dont know. If you find that information from it, tell me.
But I didnt enable KMS for Radeon as default at kernel level. I just tested it and KMS Radeon as default enabled kernel worked with my ati dual graphics...but that was with wheezy and wheezy xorg is much newer.

I am not sure if it is reasonable to enable KMS for Radeon as default with squeeze. xorg drm radeon driver might hick up. I dont know. Is there reason to enable KMS for Radeon in squeeze build ?

KMS has been added though, but it is not enabled as default for Radeon or for Intel....which makes KMS behave differently if it was enabled as default. Late Adopter has explained that in several threads in murga-forum. Check Precise Puppy and Wheezy threads for example.

More USB DVB testing

Hi pemasu,
New installation then installed new media dir and all the other pets.
did a w_scan.
smplayer failed as before locking up immediately.
VLC 2.01 same as smplayer.

Another fresh install with new media etc. Then I went back to VLC 1.0.6 this runs 5-10 seconds before locking up.

Conclusion no difference from previous testing.

I did notice kernel 3.6.3 is out

all for now
DC

Thanks DC. You have done your bit with testing. I think that the media build git I used have the newest commits. Newer that 3.6.3 kernel provides. It will be probably 3.7 kernel before git commits are transferred to the official kernel which I tested.

I will inform you when I do next new kernel build. Thanks of the info of 3.6.3. I will check the change log soon.

Unfortunately it seems still to be difficult to offer for you rtl2832U support with dpup. Nevertheless thank you for testing and providing the reports.

DC/pemasu,
In an attempt to isolate this DVB-T problem I did a fresh manual frugal install to a USB2 stick and just installed the smplayer and QT pets. (driver-NV). A copy of my channels.conf was placed in .mplayer.

No joy. I did get some split images which then froze. In the background the logs showed that channels.conf was constantly being parsed. In particular I also spotted a reference to a missing “en

Would Pemasu's tests with KMS for Radeon-Intel impact multimedia problems in any way?
Edited: Regarding "impact", means "provide solutions to" any of the multimeida-video problems.

Here to help

Hi,
here got mtCellEdit-2.0 compiled:
http://www.murga-linux.com/puppy/viewto ... 764#660764
seems running nice!
Any improvement is welcome !
Cheers,Charlie

I've updated the dpup page a little
http://puppylinux.org/wikka/dpup

if anything needs adding/changing/deleting either comment or edit the page ; -)

pemasu I have just installed Dpup Exprimo 5.X.3.6.2.1 with kernel 3.6.2 on my little Eeepc and everyting works just great.

I have added a whole lot of additional software like seamonkey, abiword, gnumeric, qt4 and Skype and they work fine too.

Very impressive.

I tested charlie6's wacom driver on Exprimo (kernel 3.6.2)
and it worked.

I noticed that in /etc/X11/ there is a file in charlie's pet package
that explains how to make xorg.conf file

http://murga-linux.com/puppy/viewtopic. ... 857#661857

_______________________________________________________