Compaq EVO N400c Adapter not working 10/100 NIC

Post Reply
Message
Author
velibor radoja
Posts: 3
Joined: Sun 21 Aug 2011, 22:08

Compaq EVO N400c Adapter not working 10/100 NIC

#1 Post by velibor radoja »

I use an old laptop Compaq Evo N400c,

Puppy 5.28

lspci -n

00:00.0 0600: 8086:7190 (rev 03)
00:01.0 0604: 8086:7191 (rev 03)
00:04.0 0607: 104c:ac1e
00:07.0 0680: 8086:7110 (rev 02)
00:07.1 0101: 8086:7111 (rev 01)
00:07.2 0c03: 8086:7112 (rev 01)
00:07.3 0680: 8086:7113 (rev 03)
00:08.0 0401: 125d:1988 (rev 12)
01:00.0 0300: 1002:4c4d (rev 64)

I use google translate, sorry for bad English.
thanks.

Please help.........

tempestuous
Posts: 5464
Joined: Fri 10 Jun 2005, 05:12
Location: Australia

#2 Post by tempestuous »

There's no ethernet device listed in your results - it should be Intel Ethernet Pro 100.
Check your bios to see if "LAN" is enabled.
Otherwise, your ethernet interface may be dead.

velibor radoja
Posts: 3
Joined: Sun 21 Aug 2011, 22:08

#3 Post by velibor radoja »

You're right, I installed a Windows XP driver took off with the HP site, but the network is not working, and even invisibly. Bios does not function around the net, so I guess it's turned on by default.
thank you
Last edited by velibor radoja on Sun 19 Aug 2012, 17:01, edited 1 time in total.

velibor radoja
Posts: 3
Joined: Sun 21 Aug 2011, 22:08

#4 Post by velibor radoja »

I'm going to find a pcmcia

tempestuous
Posts: 5464
Joined: Fri 10 Jun 2005, 05:12
Location: Australia

#5 Post by tempestuous »

velibor radoja wrote:Bios does not function around the net
You should be able to enter the bios by pressing F10 just after power-on.
Sometimes it's difficult to know exactly when the button-press is effective, so to be sure - just keep pressing the F10 button repeatedly.

Post Reply