Carolina - 1.3
Looks like 4:00pm GMT is 12:00 Noon for US Eastern (EST).
I look forward to trying Carolina out. I'll be attempting it on a ThinkPad T4* laptop with a Pentium M CPU and 2gb RAM.
Should be fun
EDIT: just curious, how did you choose the name? I live in North Carolina USA and I'm chuckling over the location matchup.
I look forward to trying Carolina out. I'll be attempting it on a ThinkPad T4* laptop with a Pentium M CPU and 2gb RAM.
Should be fun
EDIT: just curious, how did you choose the name? I live in North Carolina USA and I'm chuckling over the location matchup.
With the size of Carolina being over 300 megs, it seems like a small thing like adding fd0 as a device and an app for formatting floppies would not add that much size to it.
And there are still people that find a floppy useful.
Is not Wake Pup made for making a floppy to boot Puppy?
I am going to wait a few days before downloading the ISO as it may be in the process of being uploaded and I would not want to get a partial file what with my slow internet speed of 1.5mbs.
And there are still people that find a floppy useful.
Is not Wake Pup made for making a floppy to boot Puppy?
I am going to wait a few days before downloading the ISO as it may be in the process of being uploaded and I would not want to get a partial file what with my slow internet speed of 1.5mbs.
The Carolina breed is a wild breed from the Eastern United States, commonly know as the "American Dingo". It has a very old lineage, but wasn't discovered until the 1970's. Here's an article from Wikipedia about the Carolina breed. Ironically, the name for the distro was suggested by an Australian.starhawk wrote:Just curious, how did you choose the name? I live in North Carolina USA and I'm chuckling over the location matchup.
By the way, I'd be very curious to hear how 'lina runs on your think pad
pup-volume-monitor
Any chance of getting this in the Saluki repository if it's applicable? I'd be glad to test it.No it's not a typo, pup-volume-monitor-0.1.7: Lightweight drive management.
I reported there was a problem with the pup-volume-monitor to akash_rawal, he kindly rewrote it,
this as fixed problems with unmounting and applications crashing while mounting drives.
I can't run Carolina as it's PAE and the flag checking in syslinux or Grub4dos won't let me even though it will run on my Pentium M boxes.
Pups currently in kennel :D Older LxPupSc and X-slacko-4.4 for my users; LxPupSc, LxPupSc64 and upupEF for me. All good pups indeed, and all running savefiles for look'n'feel only. Browsers, etc. solely from SFS.
oops heres the link to the patch
http://cgit.freedesktop.org/~ickle/linu ... ff/?h=845g
saluki doesnt seem to have the patch command
can the patch command be added to carolina?
http://cgit.freedesktop.org/~ickle/linu ... ff/?h=845g
saluki doesnt seem to have the patch command
can the patch command be added to carolina?
Pup-volume-monitor
Thanks elroy. Installed and running in Saluki 023. So far so good. It seems to have cleaned up the mount/unmount behavior (I usually do it entirely within Thunar now). I'll continue to use it.Here you go, Marv - pup-volume-monitor-0.1.7-i486.tar.gz.
Pups currently in kennel :D Older LxPupSc and X-slacko-4.4 for my users; LxPupSc, LxPupSc64 and upupEF for me. All good pups indeed, and all running savefiles for look'n'feel only. Browsers, etc. solely from SFS.
patch
I wouldn't think it'd work. Carolina uses the PAE 3.2.13 Linux kernel. You would have to apply the patch to the correct kernel sources and recompile a custom kernel in order to accommodate this. You could do that, and then change the kernel out using the custom-builder in either Saluki or Carolina. At present, Carolina won't be officially supporting other kernels.slenkar wrote:could you apply this patch for 845 users? or does it interfere with other graphics cards
Carolina's target audience is newer users, and newer computers. While we'd like to accommodate everyone, and every situation, that just isn't possible.
Last edited by elroy on Fri 05 Oct 2012, 17:38, edited 1 time in total.
Re: Pup-volume-monitor
You're welcome, Marv. Sorry to hear that the PAE kernel won't run on your setup. I'll discuss with Geoffrey about possibly offering a Carolina version with the 3.2.8 kernel as an alternative.Marv wrote:Thanks elroy. Installed and running in Saluki 023. So far so good. It seems to have cleaned up the mount/unmount behavior.
Hello,
An adrive and a zdrive.. Interesting..
First impression is good. Booted up fairly quickly, correctly configured my vid card (gma45), my sound card, and barked.. Nailed the 1366x768 (instead of 1360 which some get wrong), and GL worked OOTB..
As with most 3 series kernels, I had wireless problems..
This is not a Carolina issue, but a kernel issue..
If my wireless card (RT5390) isnt physically turned on during boot, before the kernel is loaded, it WILL NOT turn on.
So, I rebooted accordingly, and it remained on..
It was seen as wlan0 under the pci2800 driver, as with Precise and Lupu Pups.
However, it failed as such:
Strangely, every post concerning this error and my card, pertain to Gentoo!
It is a firmware issue, and could be easily corrected I believe, I`ll get back on that..
Forgot to try ndiswrapper which works well for this card.
When I shut down, and attempted to make a savefile, I got:
"dev/ not found"
Could be a fluke, I`ll retry that again as well and get back, hopefully from Carolina itself....
An adrive and a zdrive.. Interesting..
First impression is good. Booted up fairly quickly, correctly configured my vid card (gma45), my sound card, and barked.. Nailed the 1366x768 (instead of 1360 which some get wrong), and GL worked OOTB..
As with most 3 series kernels, I had wireless problems..
This is not a Carolina issue, but a kernel issue..
If my wireless card (RT5390) isnt physically turned on during boot, before the kernel is loaded, it WILL NOT turn on.
So, I rebooted accordingly, and it remained on..
It was seen as wlan0 under the pci2800 driver, as with Precise and Lupu Pups.
However, it failed as such:
Strangely, every post concerning this error and my card, pertain to Gentoo!
It is a firmware issue, and could be easily corrected I believe, I`ll get back on that..
Forgot to try ndiswrapper which works well for this card.
When I shut down, and attempted to make a savefile, I got:
"dev/ not found"
Could be a fluke, I`ll retry that again as well and get back, hopefully from Carolina itself....
Close the Windows, and open your eyes, to a whole new world
I am Lead Dog of the
Puppy Linux Users Group on Facebook
Join us!
Puppy since 2.15CE...
I am Lead Dog of the
Puppy Linux Users Group on Facebook
Join us!
Puppy since 2.15CE...
cannot use "Carolina Custom Builder" because many required files are not in Carolina repository...
i might use Carolina without Adrive and just add a few required apps via .pets and/or Puppy Package Manager"...
also... might keep the Adrive if i could delete certain apps with "Remove Builtin Packages",.. eg, LibreOffice and Thunderbird
anyway... excellent os... hope you will continue to maintain it...
ps: currently using Saluki-023 with "custom" Adrive...
i might use Carolina without Adrive and just add a few required apps via .pets and/or Puppy Package Manager"...
also... might keep the Adrive if i could delete certain apps with "Remove Builtin Packages",.. eg, LibreOffice and Thunderbird
anyway... excellent os... hope you will continue to maintain it...
ps: currently using Saluki-023 with "custom" Adrive...
Last edited by yr1945 on Sat 06 Oct 2012, 01:19, edited 2 times in total.
-
- Posts: 218
- Joined: Sat 05 Jan 2008, 17:41
Carolina puppy
Beautiful puppy, best I've seen lately.
I particularly like the single click option.
Problems so far, no floppy and grub4dos only.
I have several puppies installed on my P4 but Win XP as my main OS. I want it to boot to XP without menu so puppies are booted by floppy.
I tried adding Caroline to the grub menu but it won't work.
Roger
I particularly like the single click option.
Problems so far, no floppy and grub4dos only.
I have several puppies installed on my P4 but Win XP as my main OS. I want it to boot to XP without menu so puppies are booted by floppy.
I tried adding Caroline to the grub menu but it won't work.
Roger