Posted: Fri 11 Apr 2014, 15:25
Thank you.OscarTalks wrote:MD5 checksums added to the above post as requested.
(old)Puppy Linux Discussion Forum
READ-ONLY Archive
https://oldforum.puppylinux.com/
Dpup Wheezy. Woof-CE built debian wheezy 7.2 packages used
Page 35 of 40
Posted: Sat 12 Apr 2014, 01:05
The movement that Ubuntu-based distribution changes to the Debian base is seen.
Ubuntu has intense evolution, and abnormality may occur by version up with the old model.
Debian does not force version update in comparison with it.
I think that this applies to environment using Puppy.
Because there was the matter of OpenSSL, I install and try Dpup Wheezy.
https://packages.debian.org/en/wheezy/i ... 0/download
This is careful about the things that come to support a patch, not the latest edition
Correspondence of OpenSSL is a command:
https://packages.debian.org/en/wheezy/i ... 2/download
https://packages.debian.org/en/wheezy/a ... n/download (Language Files)
Ubuntu has intense evolution, and abnormality may occur by version up with the old model.
Debian does not force version update in comparison with it.
I think that this applies to environment using Puppy.
Because there was the matter of OpenSSL, I install and try Dpup Wheezy.
- The Japanese support package was applicable to normalcy.
- Puppy Package Manager fails in update. It is necessary to delete the item of deb-multimedia.org form ~/.package/DISTRO_COMPAT_REPOS to be improved.
- The problem of OpenSSL can use the method to be improved with Debian package. Please apply a package of the i386:
https://packages.debian.org/en/wheezy/i ... 0/download
This is careful about the things that come to support a patch, not the latest edition
Correspondence of OpenSSL is a command:
Code: Select all
# openssl version
OpenSSL 1.0.1e 11 Feb 2013
# openssl version -b
built on: Tue Apr 8 10:05:11 UTC 2014- The package of Chromium:
https://packages.debian.org/en/wheezy/i ... 2/download
https://packages.debian.org/en/wheezy/a ... n/download (Language Files)
Posted: Mon 14 Apr 2014, 12:46
Hi just found dpup wheezy its is a good os.
I have 2 problems one being firefox other being downloading from repos.
FIREFOX
firefox wont run. I ran it in terminal and got a Bus Error, whatever that is.
i am not sure what I can do
my system specks are as follows.
Puppy Setup: Frugal install on hdd with 1gb save.
Device: HP Compaq nx9000
CPU: Mobile Intel(R) Celeron(R) CPU 2.40GHz
RAM: 448MB (assume actual 512mb)
Graphics: Advanced Mir=cro Devices [AMD] nee ATI RS200 [Radeon IGP330M/340M/350M
If having low ram is the issue i can upgrade to 1 or 2gb later.
on another note i have a version of firefox that runs by itself and does not need compiling it runs from its own folder outside the save file. Now I tested that and it runs no problem. so i wonder why the default one has problems.
also running firefox from other puppy os on my flash drive works ok.
PPM
the PPM updates ok the first time but i cant download apps. i tried to download sylpheed for my mail app but when downloading extra dependences I get the error they are not found in the repositories. i tried Pidgin, and several other apps and got the same result.
just want to query why. i updated ppm once and have internet setup so i dont understand.
I have 2 problems one being firefox other being downloading from repos.
FIREFOX
firefox wont run. I ran it in terminal and got a Bus Error, whatever that is.
i am not sure what I can do
my system specks are as follows.
Puppy Setup: Frugal install on hdd with 1gb save.
Device: HP Compaq nx9000
CPU: Mobile Intel(R) Celeron(R) CPU 2.40GHz
RAM: 448MB (assume actual 512mb)
Graphics: Advanced Mir=cro Devices [AMD] nee ATI RS200 [Radeon IGP330M/340M/350M
If having low ram is the issue i can upgrade to 1 or 2gb later.
on another note i have a version of firefox that runs by itself and does not need compiling it runs from its own folder outside the save file. Now I tested that and it runs no problem. so i wonder why the default one has problems.
also running firefox from other puppy os on my flash drive works ok.
PPM
the PPM updates ok the first time but i cant download apps. i tried to download sylpheed for my mail app but when downloading extra dependences I get the error they are not found in the repositories. i tried Pidgin, and several other apps and got the same result.
just want to query why. i updated ppm once and have internet setup so i dont understand.
Posted: Mon 14 Apr 2014, 13:40
Because Firefox is included in Dpup Wheezy by default,
Overwrite of the packages is the cause of the malfunction.
Please uninstall from Puppy Package Magener if you installed Firefox with .deb package.
An automatic update function is included in Firefox which is in Dpup Wheezy:
http://mzl.la/LFolSf
Overwrite of the packages is the cause of the malfunction.
Please uninstall from Puppy Package Magener if you installed Firefox with .deb package.
An automatic update function is included in Firefox which is in Dpup Wheezy:
http://mzl.la/LFolSf
Posted: Mon 14 Apr 2014, 13:58
i dont think you get what was sayng. i was talking about the default firefox in puppy causing the fault and not working so i can't use it.balloon wrote:Because Firefox is included in Dpup Wheezy by default,
Overwrite of the packages is the cause of the malfunction.
Please uninstall from Puppy Package Magener if you installed Firefox with .deb package.
An automatic update function is included in Firefox which is in Dpup Wheezy:
http://mzl.la/LFolSf
now the other version is a precompiled package that can run directly from its own folder, on any os, without needing to be installed. and it works.
there is no firefox in the dpup repos to install as debian comes with iceweasel an unbranded version of firefox created for debian.
also did you mis that i said that ppm does not work properly either.
Posted: Mon 14 Apr 2014, 20:16
Dillo ultra-light browser version 3.0.4
Released 09th April 2014
http://dillo.org
Compiled from source in Dpup Wheezy 3.5.2.11
Enabled SSL so https links should download
I've included the blue hummingbird icon
To configure Dillo - edit dillorc in the hidden folder /root/.dillo
Download from:-
http://smokey01.com/OscarTalks
Released 09th April 2014
http://dillo.org
Compiled from source in Dpup Wheezy 3.5.2.11
Enabled SSL so https links should download
I've included the blue hummingbird icon
To configure Dillo - edit dillorc in the hidden folder /root/.dillo
Download from:-
http://smokey01.com/OscarTalks
Musescore-1.3
Posted: Tue 22 Apr 2014, 09:35
Hi,
here are links to get Musescore-1.3 running on wheezy-3.5.2.11:
(and might be on aother Puppies ...):
i've found Musescore-1.3 binary package from ArchLinux
which seems running OOTB on wheezy-3.5.2.11;
download here:
http://ftp5.gwdg.de/pub/linux/archlinux ... pkg.tar.xz
+needs the /usr/lib/qt4/plugins/ stuffs
http://ftp5.gwdg.de/pub/linux/archlinux ... pkg.tar.xz
It also needs Qt-4.6 or above (i.e. Qt-4.8.2 from pemasu's repo here:)
http://smokey01.com/pemasu/pet_packages-upup/
It could even open and play some midi files.
Enjoy !
Cheers
Charlie
ps: if someone would want to get a try to compile it, here are some informations about the unsuccessfull compiling process i experienced.
I have downloaded the dependencies all from debian wheezy repo.
Compilation took place in /mnt/home to have enough space.
Unsuccesfull attempt for compilation:
i've tried to compile SourceForge's Musescore-1.3's .tar.bz2 source;
it stops at 84% compiling process upon linking CXX shared library libqtscript_gui.so;
i miss expertise to fix the errors which are reported as follows (abstract): there is no explicit message about missing dependencies
here are links to get Musescore-1.3 running on wheezy-3.5.2.11:
(and might be on aother Puppies ...):
i've found Musescore-1.3 binary package from ArchLinux
which seems running OOTB on wheezy-3.5.2.11;
download here:
http://ftp5.gwdg.de/pub/linux/archlinux ... pkg.tar.xz
+needs the /usr/lib/qt4/plugins/ stuffs
http://ftp5.gwdg.de/pub/linux/archlinux ... pkg.tar.xz
It also needs Qt-4.6 or above (i.e. Qt-4.8.2 from pemasu's repo here:)
http://smokey01.com/pemasu/pet_packages-upup/
It could even open and play some midi files.
Enjoy !
Cheers
Charlie
ps: if someone would want to get a try to compile it, here are some informations about the unsuccessfull compiling process i experienced.
I have downloaded the dependencies all from debian wheezy repo.
Compilation took place in /mnt/home to have enough space.
Unsuccesfull attempt for compilation:
i've tried to compile SourceForge's Musescore-1.3's .tar.bz2 source;
it stops at 84% compiling process upon linking CXX shared library libqtscript_gui.so;
i miss expertise to fix the errors which are reported as follows (abstract): there is no explicit message about missing dependencies
#make release
if test ! -d build; \
then \
mkdir build; \
cd build; \
cmake -DCMAKE_BUILD_TYPE=RELEASE \
-DCMAKE_INSTALL_PREFIX=""/usr/local"" \
../mscore; \
make lrelease; \
make -j `grep -c processor /proc/cpuinfo`; \
else \
echo "build directory does already exist, please remove first with 'make clean'"; \
fi;
-- The C compiler identification is GNU 4.7.2
-- The CXX compiler identification is GNU 4.7.2
-- Check for working C compiler: /usr/bin/gcc
-- Check for working C compiler: /usr/bin/gcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Found Doxygen: /usr/bin/doxygen (found version "1.8.1.2")
-- latex command LATEX_COMPILER not found but usually required. You will probably get warnings and user inetraction on doxy run.
-- makeindex command MAKEINDEX_COMPILER not found but usually required.
-- dvips command DVIPS_CONVERTER not found but usually required.
-- configured /initrd/mnt/dev_save/mscore-1.3/mscore/Doxyfile.in --> /initrd/mnt/dev_save/mscore-1.3/build/Doxyfile
-- Looking for Q_WS_X11
-- Looking for Q_WS_X11 - found
-- Looking for Q_WS_WIN
-- Looking for Q_WS_WIN - not found.
-- Looking for Q_WS_QWS
-- Looking for Q_WS_QWS - not found.
-- Looking for Q_WS_MAC
-- Looking for Q_WS_MAC - not found.
-- Found Qt4: /usr/bin/qmake (found suitable version "4.8.2", required is "4.6")
-- jack (jack audio connection kit) >= 0.98.0 found
-- CMAKE_CXX_COMPILER_ID:GNU
-- Configuring done
-- Generating done
-- Build files have been written to: /initrd/mnt/dev_save/mscore-1.3/build
make[1]: Entering directory `/initrd/mnt/dev_save/mscore-1.3/build'
make[2]: Entering directory `/initrd/mnt/dev_save/mscore-1.3/build'
make[3]: Entering directory `/initrd/mnt/dev_save/mscore-1.3/build'
make[4]: Entering directory `/initrd/mnt/dev_save/mscore-1.3/build'
Scanning dependencies of target lrelease
make[4]: Leaving directory `/initrd/mnt/dev_save/mscore-1.3/build'
make[4]: Entering directory `/initrd/mnt/dev_save/mscore-1.3/build'
...
/initrd/mnt/dev_save/mscore-1.3/mscore/scriptgen/qtbindings/gui/qtscript_QTextItem.cpp:131:56: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
/initrd/mnt/dev_save/mscore-1.3/mscore/scriptgen/qtbindings/gui/qtscript_QTextItem.cpp: In function ‘QScriptValue qtscript_QTextItem_RenderFlags_toString(QScriptContext*, QScriptEngine*)’:
/initrd/mnt/dev_save/mscore-1.3/mscore/scriptgen/qtbindings/gui/qtscript_QTextItem.cpp:213:104: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
...
/initrd/mnt/dev_save/mscore-1.3/mscore/mscore/pa.cpp:45:10: error: ‘PaStreamCallbackTimeInfo’ does not name a type
/initrd/mnt/dev_save/mscore-1.3/mscore/mscore/pa.cpp:45:34: error: ISO C++ forbids declaration of ‘parameter’ with no type [-fpermissive]
/initrd/mnt/dev_save/mscore-1.3/mscore/mscore/pa.cpp:45:37: error: ‘PaStreamCallbackFlags’ has not been declared
/initrd/mnt/dev_save/mscore-1.3/mscore/mscore/pa.cpp: In member function ‘virtual bool Portaudio::init()’:
/initrd/mnt/dev_save/mscore-1.3/mscore/mscore/pa.cpp:94:71: error: ‘Pa_GetVersionText’ was not declared in this scope
...
make[3]: *** [mscore/CMakeFiles/mscore.dir/pa.cpp.o] Error 1
make[2]: *** [mscore/CMakeFiles/mscore.dir/all] Error 2
make[2]: *** Waiting for unfinished jobs....
/initrd/mnt/dev_save/mscore-1.3/mscore/scriptgen/qtbindings/gui/qtscriptshell_QAbstractGraphicsShapeItem.cpp: In member function ‘virtual QRectF QtScriptShell_QAbstractGraphicsShapeItem::boundingRect() const’:
/initrd/mnt/dev_save/mscore-1.3/mscore/scriptgen/qtbindings/gui/qtscriptshell_QAbstractGraphicsShapeItem.cpp:73:1: warning: control reaches end of non-void function [-Wreturn-type]
...
/initrd/mnt/dev_save/mscore-1.3/mscore/scriptgen/qtbindings/gui/qtscriptshell_QWindowsStyle.cpp: In member function ‘virtual QPixmap QtScriptShell_QWindowsStyle::standardPixmap(QStyle::StandardPixmap, const QStyleOption*, const QWidget*) const’:
/initrd/mnt/dev_save/mscore-1.3/mscore/scriptgen/qtbindings/gui/qtscriptshell_QWindowsStyle.cpp:342:1: warning: control reaches end of non-void function [-Wreturn-type]
...
[ 67%] Building CXX object mscore/CMakeFiles/mscore.dir/pa.cpp.o
[ 67%] Building CXX object scriptgen/qtbindings/gui/CMakeFiles/qtscript_gui.dir/qtscript_QTreeWidgetItem.cpp.o
make[3]: Leaving directory `/initrd/mnt/dev_save/mscore-1.3/build'
[ 67%] Building CXX object scriptgen/qtbindings/gui/CMakeFiles/qtscript_gui.dir/qtscript_QUndoCommand.cpp.o
...
[ 84%] Building CXX object scriptgen/qtbindings/gui/CMakeFiles/qtscript_gui.dir/qtscriptshell_QFontDialog.cpp.o
[ 84%] Building CXX object scriptgen/qtbindings/gui/CMakeFiles/qtscript_gui.dir/qtscriptshell_QDropEvent.cpp.o
[ 84%] Building CXX object scriptgen/qtbindings/gui/CMakeFiles/qtscript_gui.dir/qtscriptshell_QDrag.cpp.o
Linking CXX shared library libqtscript_gui.so
make[3]: Leaving directory `/initrd/mnt/dev_save/mscore-1.3/build'
[ 84%] Built target qtscript_gui
make[2]: Leaving directory `/initrd/mnt/dev_save/mscore-1.3/build'
make[1]: Leaving directory `/initrd/mnt/dev_save/mscore-1.3/build'
make[1]: *** [all] Error 2
make: *** [release] Error 2
#
Sending / Receiving faxes with efax-gtk-3.2.13
Posted: Tue 22 Apr 2014, 15:57
Hi,
Sending / Receiving faxes with efax-gtk-3.2.13 latest version as now
download link and screenshot given here:
http://murga-linux.com/puppy/viewtopic.php?t=93230
enjoy ...!
charlie
Sending / Receiving faxes with efax-gtk-3.2.13 latest version as now
download link and screenshot given here:
http://murga-linux.com/puppy/viewtopic.php?t=93230
enjoy ...!
charlie
Posted: Wed 23 Apr 2014, 12:47
Dpup Wheezy 3.5.2.11 has Gnome-Mplayer 1.0.7 which works fine, I have had no problems with it, but I decided to try compiling the latest version which is 1.0.9b
I am attaching the ChangeLog if you want to see what has been changed in the later version. Remove (by renaming) the fake .gz extension off the end of the file name after downloading before you open it to read it.
All seems quick and easy to do. I compiled it with the gmtk-1.0.9 dependency linked statically so shared libraries are not needed. The older version gmtk shared libs will be ignored. I don't think they are used for anything else so could be removed in fact.
If anyone wants to try it out:-
http://smokey01.com/OscarTalks
I am attaching the ChangeLog if you want to see what has been changed in the later version. Remove (by renaming) the fake .gz extension off the end of the file name after downloading before you open it to read it.
All seems quick and easy to do. I compiled it with the gmtk-1.0.9 dependency linked statically so shared libraries are not needed. The older version gmtk shared libs will be ignored. I don't think they are used for anything else so could be removed in fact.
If anyone wants to try it out:-
http://smokey01.com/OscarTalks
Posted: Wed 23 Apr 2014, 23:06
Thank you.If anyone wants to try it out:-
http://smokey01.com/OscarTalks
It works fine in Dpup Wheezy 3.5.2.8 too.
I'm using it as default audio and media player.
Posted: Mon 28 Apr 2014, 01:56
Experimental build of VLC 2.1.4 Media Player
Compiled in Dpup Wheezy. In case you haven't seen it in the Multimedia thread, users may wish to give it a try (take the usual precautions).
More details here:-
http://www.murga-linux.com/puppy/viewtopic.php?t=93448
Compiled in Dpup Wheezy. In case you haven't seen it in the Multimedia thread, users may wish to give it a try (take the usual precautions).
More details here:-
http://www.murga-linux.com/puppy/viewtopic.php?t=93448
Posted: Mon 12 May 2014, 07:27
Hi,
about compiling in wheezy-3.5.2.11 ... (and maybe others...)
When compiling applications in wheezy_3.5.2.11 (+ only devx_wheezy_3.5.2.11.sfs mounted + applications requested dependencies ), i use to compile according to the usual steps documented in the README and INSTALL doc:
./configure --prefix=/usr
make
make install
I noticed that the resulting home-compiled binaries have a larger MB size than the one compiled by other forum members, or present in the puppy repos, or available on the Debian repo:
- as an example, i got compiled Htop-1.0.3's /usr/bin/htop to 575K, whereas it sizes only 110K instead.
- again, compiling nted-1.10.18 results in a ca. 6MB /usr/bin/nted binary whereas it is only 1MB in the repo.
Then how might it be possible to -dramaticaly
- shrink their size that much?
Thanks for any enlightment
Cheers, Charlie
about compiling in wheezy-3.5.2.11 ... (and maybe others...)
When compiling applications in wheezy_3.5.2.11 (+ only devx_wheezy_3.5.2.11.sfs mounted + applications requested dependencies ), i use to compile according to the usual steps documented in the README and INSTALL doc:
./configure --prefix=/usr
make
make install
I noticed that the resulting home-compiled binaries have a larger MB size than the one compiled by other forum members, or present in the puppy repos, or available on the Debian repo:
- as an example, i got compiled Htop-1.0.3's /usr/bin/htop to 575K, whereas it sizes only 110K instead.
- again, compiling nted-1.10.18 results in a ca. 6MB /usr/bin/nted binary whereas it is only 1MB in the repo.
Then how might it be possible to -dramaticaly
- shrink their size that much?Thanks for any enlightment
Cheers, Charlie
Posted: Mon 12 May 2014, 09:07
Finally making the shift from pemasu's Upup Precise 3.8.3.1 to Dpup Wheezy, after suffering substantial filesystem errors to *parts* of my pupsave. Perhaps the hard drive on my Lenovo T60 (3GB Ram, dual core at 2 GHz) is starting to fritz, but I have had a history of improper shutdowns I hope to avoid in future with judicious system backups. Will be following the "keep your savefile slim and healthy" thread pretty closely too, now http://www.murga-linux.com/puppy/viewtopic.php?t=62110
Anywho, the migration has been surprisingly painless - except for the issue of the xorg/ radeon/KMS driver issue that I am working through thanks to others posting already in this thread. Downloading devx as I type. But a newbie question - how do I re-enable sliding working windows between desktops/workspaces?? This is a JWM feature I find *particularly* useful in a laptop - but I can't find a simple setting switch for it like screensaver, trays, desktops etc etc. Could someone please post a solution - is there a line in the jwmconfig2 I need to include?
Many Thanks (esp to pemasu for this 'keeper')
Anywho, the migration has been surprisingly painless - except for the issue of the xorg/ radeon/KMS driver issue that I am working through thanks to others posting already in this thread. Downloading devx as I type. But a newbie question - how do I re-enable sliding working windows between desktops/workspaces?? This is a JWM feature I find *particularly* useful in a laptop - but I can't find a simple setting switch for it like screensaver, trays, desktops etc etc. Could someone please post a solution - is there a line in the jwmconfig2 I need to include?
Many Thanks (esp to pemasu for this 'keeper')
Posted: Mon 12 May 2014, 10:34
See http://ip-208-109-22-214.ip.secureserve ... 132f81a08echarlie6 wrote:I noticed that the resulting home-compiled binaries have a larger MB size than the one compiled by other forum members, or present in the puppy repos, or available on the Debian repo:
- as an example, i got compiled Htop-1.0.3's /usr/bin/htop to 575K, whereas it sizes only 110K instead.
- again, compiling nted-1.10.18 results in a ca. 6MB /usr/bin/nted binary whereas it is only 1MB in the repo.
Then how might it be possible to -dramaticaly
Thanks for any enlightment
technosaurus wrote:you get a smaller binary with:
strip -s -R .note -R .comment *
or for libs
strip --strip-unneeded -R .note -R .comment *.so*
Posted: Mon 12 May 2014, 11:19
Some weeks ago I compiled the latest NDISwrapper (1.59) in Dpup Wheezy.
Only recently I got round to testing it with my Netgear WNA3100 USB wireless adapter.
It's working very well.
Take note, it contains a kernel module so is only suitable for Dpup Wheezy with kernel 3.5.2 and will not work in other Puppies.
ndiswrapper-1.59-k3.5.2-wheezy.pet
Download from:-
http://smokey01.com/OscarTalks
Always take the usual precautions before installing anything.
Only recently I got round to testing it with my Netgear WNA3100 USB wireless adapter.
It's working very well.
Take note, it contains a kernel module so is only suitable for Dpup Wheezy with kernel 3.5.2 and will not work in other Puppies.
ndiswrapper-1.59-k3.5.2-wheezy.pet
Download from:-
http://smokey01.com/OscarTalks
Always take the usual precautions before installing anything.
Posted: Mon 12 May 2014, 15:41
Hi Leon as also Technosaurus !
doing
dramaticaly reduced the binary size from ca. 6MB to 1,1MB !! many thanks again !
Cheers, Charlie
!
Yep ! using strip worked nice !Leon wrote:technosaurus wrote:you get a smaller binary with:
strip -s -R .note -R .comment *
or for libs
strip --strip-unneeded -R .note -R .comment *.so*
doing
Code: Select all
# strip -s -R .note -R .comment ntedCheers, Charlie
Posted: Tue 13 May 2014, 16:40
In Dpup Squeeze Exprimo, there is an application with the title "Desktop Setup". I can't find it in Dpup Wheezy, does anyone know where I can get hold of it?
It's a program that saves the current desktop, so it can be restored.
Very handy for anyone who changes the icons on the desktop and then changes the list of loaded sfs files in "Boot Manager".
(Which causes the "default" icons to be re-written onto the desktop.)
gyro
It's a program that saves the current desktop, so it can be restored.
Very handy for anyone who changes the icons on the desktop and then changes the list of loaded sfs files in "Boot Manager".
(Which causes the "default" icons to be re-written onto the desktop.)
gyro
Posted: Wed 14 May 2014, 04:15
Hi gyro,
as what you are looking for is from a Pemasu's production, you might have a look to his repo:
http://www.smokey01.com/pemasu
and therein look for it browing among the pet_packages-xyz pets folders:
does this match what you would need? (dpup=debian pup pets repo)
http://www.smokey01.com/pemasu/pet_pack ... up-0.5.pet
This might also work on dpup-wheezy ...just get a try on it
have fun!
Charlie
as what you are looking for is from a Pemasu's production, you might have a look to his repo:
http://www.smokey01.com/pemasu
and therein look for it browing among the pet_packages-xyz pets folders:
does this match what you would need? (dpup=debian pup pets repo)
http://www.smokey01.com/pemasu/pet_pack ... up-0.5.pet
This might also work on dpup-wheezy ...just get a try on it
have fun!
Charlie
Posted: Sat 17 May 2014, 15:48
@charlie6
Thanks.
Yes, I'll try that.
gyro
Edit: Thanks, that works in Wheezy.
gyro
Thanks.
Yes, I'll try that.
gyro
Edit: Thanks, that works in Wheezy.
gyro
Posted: Sat 07 Jun 2014, 17:33
I have compiled the latest openssl-1.0.1h security fix release
For Dpup Wheezy only, not other Pups.
Also the latest curl-7.37.0
Not sure if the original included one is broken or doesn't like openssl upgrades.
This one seems fine so far though.
http://smokey01.com/OscarTalks
Always take the usual precautions before installing anything.
For Dpup Wheezy only, not other Pups.
Also the latest curl-7.37.0
Not sure if the original included one is broken or doesn't like openssl upgrades.
This one seems fine so far though.
http://smokey01.com/OscarTalks
Always take the usual precautions before installing anything.