Dpup Wheezy. Woof-CE built debian wheezy 7.2 packages used
3.5.2.11
Upgrade 3.5.2.8 to 3.5.2.11
Went very well!
WiFi now 'WORKS' as it should (even survives reboots.) and was very fast setting up... automatically found everything needed to connect except my 'key- numbers' typed those in where it asked for them, BINGO... connect!!!
Linksys AE1000
rt2800usb
It appears finally the wifi with puppy is solved.
>>>---Indian------>
Went very well!
WiFi now 'WORKS' as it should (even survives reboots.) and was very fast setting up... automatically found everything needed to connect except my 'key- numbers' typed those in where it asked for them, BINGO... connect!!!
Linksys AE1000
rt2800usb
It appears finally the wifi with puppy is solved.
>>>---Indian------>
- Attachments
-
- desktop-3.5.2.11.png
- (161.78 KiB) Downloaded 1584 times
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
Fresh manual frugal test install of 3.5.2.11......everything looking good so far.
# report-video
VIDEO REPORT: Dpup Wheezy, version 3.5.2.11
Chip description:
VGA compatible controller: NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev c1)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1440x900
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): nouveau
Loaded modules: dbe dri dri2 exa extmod fb fbdevhw glx kbd mouse record shadowfb
Actual rendering on monitor:
Resolution: 1440x900 pixels (380x238 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
-Computer-
Processor : AMD Athlon(tm) XP 2400+
Memory : 1033MB (194MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Thu 12 Dec 2013 10:42:25 PM CST
-Display-
Resolution : 1440x900 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : VIA8233 - VIA 8235
# report-video
VIDEO REPORT: Dpup Wheezy, version 3.5.2.11
Chip description:
VGA compatible controller: NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev c1)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1440x900
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): nouveau
Loaded modules: dbe dri dri2 exa extmod fb fbdevhw glx kbd mouse record shadowfb
Actual rendering on monitor:
Resolution: 1440x900 pixels (380x238 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
-Computer-
Processor : AMD Athlon(tm) XP 2400+
Memory : 1033MB (194MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Thu 12 Dec 2013 10:42:25 PM CST
-Display-
Resolution : 1440x900 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : VIA8233 - VIA 8235
Correct me if I am wrong on thisSatori wrote:Updated all my systems to 3.5.2.11, now that the wifi and Chrome is working again.
Only problem I found is that after waking up from the sleep mode, from closing the laptop's
lid, the hot keys for the sound buttons no longer function.
But AFAIK the problem you mention
are a known old one and I am not sure
that there is a solution or that it is promised
that it should work.
Just from my very poor memory.
I use Google Search on Puppy Forum
not an ideal solution though
not an ideal solution though
Just tried the 10 version.
Abiword now shows highlighted text without going black.
Wheezy openbox plus working ok (Vicmz, not sure but if you add the dpup openox pet afterwards it might make obconf work, forgotten what I did in 8 but I removed xdg jwm temporarily and then put it back and openbox and menu maker started to respond, bit hacky though. Tint2rc conf is really good and quite intuitive once you make your desktop files and icons.
The powersave button on the taskbar is great. Turns a desktop dualcore into a halfcore in 5 seconds.
Another nice distro from Pemasu.
Abiword now shows highlighted text without going black.
Wheezy openbox plus working ok (Vicmz, not sure but if you add the dpup openox pet afterwards it might make obconf work, forgotten what I did in 8 but I removed xdg jwm temporarily and then put it back and openbox and menu maker started to respond, bit hacky though. Tint2rc conf is really good and quite intuitive once you make your desktop files and icons.
The powersave button on the taskbar is great. Turns a desktop dualcore into a halfcore in 5 seconds.
Another nice distro from Pemasu.
- Attachments
-
- image-1_new.png
- (193.78 KiB) Downloaded 1176 times
- koulaxizis
- Posts: 452
- Joined: Sun 17 Jul 2011, 18:43
- Location: Greece
- Contact:
LxPup-by-SFS available for Dpup Wheezy
I've made a version of LxPup-by-SFS for Dpup Wheezy - see
http://murga-linux.com/puppy/viewtopic. ... 812#743812
This means that at a future date there could be a Wheezy flavour of LxPup13.11
Cheers
peebee
http://murga-linux.com/puppy/viewtopic. ... 812#743812
This means that at a future date there could be a Wheezy flavour of LxPup13.11
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Here are some pets I compiled on wheezy, I tried installing transmission from wheezy repo through PPM and it goes OK but when you run it, it scrambles the GUI interface, assuming something to do with gtk3, this is the last version that supported gtk2.
Also fluxbox compiled.
http://meownplanet.net/dejan/pets/wheezy-pets/
Also fluxbox compiled.
http://meownplanet.net/dejan/pets/wheezy-pets/
puppy.b0x.me stuff mirrored [url=https://drive.google.com/open?id=0B_Mb589v0iCXNnhSZWRwd3R2UWs]HERE[/url] or [url=http://archive.org/details/Puppy_Linux_puppy.b0x.me_mirror]HERE[/url]
dejan555. Thank you very much. About scrambled gui. Surely it goes to the gtk-3.0.
I suppose you have meddled with gtk themes. Knowing you. When I tested with default gtk-3.0 theme, Bluebird, I didnt got scrambled gui when testing debian wheezy main transmission-gtk. Gtk-3.0 themes are mess. There is no underlying standard...themes have tendency to broke...when underlying deps are updated...I have manually fixed the ones I have in Dpup Wheezy. I wont much try to add more gtk-3.0 themes to the build. They just are too difficult to maintain. I hope the situation will clear in the future.
I tested also transmission-qt, worked and qbittorrent. The latter needed devx sfs to be installed, due to python needs. The nova search in qbittorrent is python dependent.
I will upload your pets to the pet_packages-wheezy....when I have time to start next update cycle. Hopefully during Christmas....
And thank you again. Compilers are always needed. And thanks to don570 also of his Gimp and other pets. I will check them in the future also. Thanks goes to the vicmz and peebee too....of their efforts in alternative WM. Openbox - Lxde - tint2 are great wm additions. I think they will have place in pet_packages-wheezy also...
About non-working obconf...I read from some thread that there was at least one needed lib missing: I checked my distro_specs.
I have added this lib for obconf: libxcb-util0
Might be useful to try to install and test obconf again. That lib is not yet preinstalled.
I suppose you have meddled with gtk themes. Knowing you. When I tested with default gtk-3.0 theme, Bluebird, I didnt got scrambled gui when testing debian wheezy main transmission-gtk. Gtk-3.0 themes are mess. There is no underlying standard...themes have tendency to broke...when underlying deps are updated...I have manually fixed the ones I have in Dpup Wheezy. I wont much try to add more gtk-3.0 themes to the build. They just are too difficult to maintain. I hope the situation will clear in the future.
I tested also transmission-qt, worked and qbittorrent. The latter needed devx sfs to be installed, due to python needs. The nova search in qbittorrent is python dependent.
I will upload your pets to the pet_packages-wheezy....when I have time to start next update cycle. Hopefully during Christmas....
And thank you again. Compilers are always needed. And thanks to don570 also of his Gimp and other pets. I will check them in the future also. Thanks goes to the vicmz and peebee too....of their efforts in alternative WM. Openbox - Lxde - tint2 are great wm additions. I think they will have place in pet_packages-wheezy also...
About non-working obconf...I read from some thread that there was at least one needed lib missing: I checked my distro_specs.
I have added this lib for obconf: libxcb-util0
Might be useful to try to install and test obconf again. That lib is not yet preinstalled.
Hi pemasupemasu wrote:..I read from some thread that there was at least one needed lib missing: I checked my distro_specs.
I have added this lib for obconf: libxcb-util0
Might be useful to try to install and test obconf again. That lib is not yet preinstalled.
That lib is in my current lxpupsetup-d.3.5.2.pet.....I will now remove it once 3.5.2.11+ appears.
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
I didn't change themes, it was the default one, and next time I tried installing transmission-cli only but somehow that broke gui too (more precisely text in gui - I get square characters instead text everywhere)
Suggestion about appereance: make urxvt nicer via ~/.Xdefaults like sidebar on the right and maybe darker background I'll post my config later
Suggestion about appereance: make urxvt nicer via ~/.Xdefaults like sidebar on the right and maybe darker background I'll post my config later
puppy.b0x.me stuff mirrored [url=https://drive.google.com/open?id=0B_Mb589v0iCXNnhSZWRwd3R2UWs]HERE[/url] or [url=http://archive.org/details/Puppy_Linux_puppy.b0x.me_mirror]HERE[/url]
Thanks Koulaxizis, I moulded it from electronskoulaxizis wrote:@Smithy Very nice desktop!!
Just before I forget, Yes that libxcb-util0_0.3.8.2 i386 deb in the wheezy repo brings openbox conf to life, and married with Vicmz Openbox_Plus 1.5.pet, gets a fully working Tint/openbox desktop with fixmenus updating correctly and living in harmony with JWM.
Didn't have much joy with the Wheezy repo on the openbox/tint debs.
Roxterm works also from Wheezy repo, either gtk 2 or 3 and also Roxterm 1.1.17.1 pet
and menumaker 1.1.1.7 pet amongst all those nice little progs that were made and forgotten about.
This is on version 11.
My ~/.Xdefaults
And here are packages for weechat, python plugin is packaged separately in case you don't have python installed/loaded with devx
weechat-0.4.2-i686-wheezy35211.pet
weechat_PYTHON-0.4.2-i686-wheezy35211.pet
weechat_NLS-0.4.2-i686-wheezy35211.pet
weechat_DEV-0.4.2-i686-wheezy35211.pet
Code: Select all
!Rxvt*keysym.0xFF50:\001
!Rxvt*keysym.0xFF57:\005
! but urxvt in quirky etc needs these...
!Rxvt.keysym.Home: \033[1~
!Rxvt.keysym.End: \033[4~
! broomdodger reports this works in both 431 and quirky (rxvt and urxvt)...
Rxvt.keysym.0xFF50: \033[1~
Rxvt.keysym.0xFF57: \033[4~
!Rxvt*menu: /root/.rxvt.menu
Rxvt*saveLines: 1000
urxvt.foreground:#00FF00
urxvt.background:#000000
urxvt.underlineColor:#00FF00
! fonts
! run "fc-list" for a list of available fonts
urxvt.font: xft:Nimbus Mono L:style=Regular:pixelsize=16
urxvt.geometry:70x25
urxvt.scrollBar: True
urxvt.scrollBar_right: true
urxvt.scrollTtyOutput: False
urxvt.scrollTtyKeypress: True
urxvt.secondaryScroll: True
urxvt.saveLines: 1000
urxvt.cursorUnderline:True
urxvt.cursorBlink:True
urxvt.transparent:Off
urxvt.shading:85
urxvt.borderLess:Off
weechat-0.4.2-i686-wheezy35211.pet
weechat_PYTHON-0.4.2-i686-wheezy35211.pet
weechat_NLS-0.4.2-i686-wheezy35211.pet
weechat_DEV-0.4.2-i686-wheezy35211.pet
puppy.b0x.me stuff mirrored [url=https://drive.google.com/open?id=0B_Mb589v0iCXNnhSZWRwd3R2UWs]HERE[/url] or [url=http://archive.org/details/Puppy_Linux_puppy.b0x.me_mirror]HERE[/url]
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
@Smithy
nice desktop ...!
Just had like to know what the jwmrc.tray code to get the 2 lines clock format displayed ?
Thanks for answering!
Charlie
nice desktop ...!
Just had like to know what the jwmrc.tray code to get the 2 lines clock format displayed ?
Thanks for answering!
Charlie
- Attachments
-
- image-1_new.png
- (34.56 KiB) Downloaded 1361 times
Charlie 6, it is actually the tint 2 panel that is showing the date and clock (and battery time).
It is part of openbox plus 1.5 pet . The panel is alterable via config/tint2/tint2rc.conf.
For information on manually configuring tint2 see http://code.google.com/p/tint2/wiki/Configure
Hope this helps.
It is part of openbox plus 1.5 pet . The panel is alterable via config/tint2/tint2rc.conf.
For information on manually configuring tint2 see http://code.google.com/p/tint2/wiki/Configure
Hope this helps.
There's no hiawatha in wheezy, but there's pplog (menu entry and /root/Web-Server/blog) Is this intentional? You could package pplog too as separate pet (although it's only 88 KB and probably insignificant when compressed into sfs but would remove Web-Server dir from /root) or add hiawatha to iso?
puppy.b0x.me stuff mirrored [url=https://drive.google.com/open?id=0B_Mb589v0iCXNnhSZWRwd3R2UWs]HERE[/url] or [url=http://archive.org/details/Puppy_Linux_puppy.b0x.me_mirror]HERE[/url]
Also, when I start pure-ftpd server (I always start it from console, just: pure-ftpd & I also tried from menu dialog where "prevent user root connections" is no checked) I can only login as anonymous to ftpd directory, I can't login as root (password woofwoof? I also ran passwd to set it)
puppy.b0x.me stuff mirrored [url=https://drive.google.com/open?id=0B_Mb589v0iCXNnhSZWRwd3R2UWs]HERE[/url] or [url=http://archive.org/details/Puppy_Linux_puppy.b0x.me_mirror]HERE[/url]
Hi Pemasu - Seasons greatings and a big thankyou for yet another fantastic puppy.
No obvious issues - all seems good OOTB.
# uname -a
Linux e732 3.5.2-dpup #1 SMP Mon Aug 20 20:32:41 AST 2012 i686 GNU/Linux
# free
total used free shared buffers
Mem: 1804864 991604 813260 0 29456
-/+ buffers: 962148 842716
Swap: 0 0 0
# uptime
03:35:02 up 5 days, 5:53, load average: 0.00, 0.06, 0.11
#
No obvious issues - all seems good OOTB.
# uname -a
Linux e732 3.5.2-dpup #1 SMP Mon Aug 20 20:32:41 AST 2012 i686 GNU/Linux
# free
total used free shared buffers
Mem: 1804864 991604 813260 0 29456
-/+ buffers: 962148 842716
Swap: 0 0 0
# uptime
03:35:02 up 5 days, 5:53, load average: 0.00, 0.06, 0.11
#
[b]Asus[/b] 701SD. 2gig ram. 8gb SSD. [b]IBM A21m[/b] laptop. 192mb ram. PIII Coppermine proc. [b]X60[/b] T2400 1.8Ghz proc. 2gig ram. 80gb hdd. [b]T41[/b] Pentium M 1400Mhz. 512mb ram.