Well that failed.
Or to be more accurate it failed to load the network driver.
My current system:
Asus P5K deluxe wifi motherboard with wifi disabled.
Nvidia GT520 passive video card.
DVD at 80 HDD on the IDE interface.
The SATA drives are unplugged until the base system is running.
Full installation on the first 15GB of the drive.
Installation is the one from the first post (when I finally found a working link on page 6).
The network interface that I am currently trying to use is Realtek 8187.
Incidently this board works 100% in NAS4free.
Pupserver full install: no ethernet connection (Solved)
-
- Posts: 4
- Joined: Sat 06 Oct 2012, 15:56
corinthian...welcome to Puppy mate but....grrrr...
What Puppy version?????????????????
Why disable wifi??
"""""""""""
Your spec s:
http://reviews.wize.com/motherboards/p3 ... ore-2-quad
http://www.asus.com/Motherboards/Intel_ ... ifications
" LAN Marvell88E8056® PCI-E LAN controllers
RealtekRTL8110SC® PCI LAN controller
Wireless LAN ASUS WiFi-AP Solo
54 Mbps IEEE 802.11g and backwards compatible with 11 Mbps IEEE 802.11b
Software Access Point mode
Station mode: Infrastruceure mode and Ad-Hoc mode "
"""""""""
" The Marvel 88E8056 Gigabit Ethernet Controller is PCI-e but had a history of issues in Linux."
http://www.linuxquestions.org/hcl/showp ... /15/sort/2
But above says it's fine.
"""""
Try >> DpupExprimo5X327 >>an earlier series....
http://smokey01.com/pemasu/DpupSqueeze5 ... primo5X327
squeeze-5.X.3.2.7-SCSI.iso 23-Feb-2012 15:36 150M
Lucid 528.05
http://murga-linux.com/puppy/viewtopic.php?t=70855
Slacko 533.
http://murga-linux.com/puppy/viewtopic.php?t=76279
Three-Headed Dog 5.2.8.005 Updated ISO
http://murga-linux.com/puppy/viewtopic.php?t=70736
Chris.
What Puppy version?????????????????
Why disable wifi??
"""""""""""
Your spec s:
http://reviews.wize.com/motherboards/p3 ... ore-2-quad
http://www.asus.com/Motherboards/Intel_ ... ifications
" LAN Marvell88E8056® PCI-E LAN controllers
RealtekRTL8110SC® PCI LAN controller
Wireless LAN ASUS WiFi-AP Solo
54 Mbps IEEE 802.11g and backwards compatible with 11 Mbps IEEE 802.11b
Software Access Point mode
Station mode: Infrastruceure mode and Ad-Hoc mode "
"""""""""
" The Marvel 88E8056 Gigabit Ethernet Controller is PCI-e but had a history of issues in Linux."
http://www.linuxquestions.org/hcl/showp ... /15/sort/2
But above says it's fine.
"""""
Try >> DpupExprimo5X327 >>an earlier series....
http://smokey01.com/pemasu/DpupSqueeze5 ... primo5X327
squeeze-5.X.3.2.7-SCSI.iso 23-Feb-2012 15:36 150M
Lucid 528.05
http://murga-linux.com/puppy/viewtopic.php?t=70855
Slacko 533.
http://murga-linux.com/puppy/viewtopic.php?t=76279
Three-Headed Dog 5.2.8.005 Updated ISO
http://murga-linux.com/puppy/viewtopic.php?t=70736
Chris.
-
- Posts: 4
- Joined: Sat 06 Oct 2012, 15:56
Pupserver-435 is built from an older Puppy that probably doesn't support your wifi. If that is a deal-breaker, you should consider another setup route.corinthian wrote:Not using Wifi at the moment and when I do it'll be via the router.
1. Find a Puppy that DOES work with your wifi.
2. Install Samba-TNG or one of the full Samba packages.
3. Customize it to share the desired drives.