Puppy Linux Discussion Forum

grump · Joined: 10 Oct 2011 Posts: 65 Location: Melbourne, Oz

I think Mesa is broken too. After my 5.3.3 cacked itself and I did a clean re-install Mesa failed from the slickpet(?) drivers tab and likewise if I got the pet from ibiblio. Downloads ok but the install fails and sorry I can't remember the error message.

vicmz · Joined: 15 Jan 2012 Posts: 609

Hi,

The 'Personalize - Settings' application is not properly translated. I made some corrections but was unable to use them in Slacko. Maybe the new .mo file should be in a directory different than /usr/share/locale/es/LC_MESSAGES ?

James C · Joined: 26 Mar 2009 Posts: 4737 Location: Kentucky

Slacko 5.3.3.2 live pfix=ram on the P4 test box.

# report-video
intel
Slacko Puppy, version 5.3.3.2 on Thu 5 Jul 2012

Chip description:
2.0 VGA compatible controller
Intel Corporation 82865G Integrated Graphics Controller (rev 02)
oem: Intel(r)865G Graphics Chip Accelerated VGA BIOS
product: Intel(r)865G Graphics Controller Hardware Version 0.0

X Server: Xorg
Driver used: intel

X.Org version: 1.9.5
dimensions: 1024x768 pixels (270x203 millimeters)
depth of root window: 24 planes

...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz

# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
377 frames in 5.0 seconds = 75.371 FPS
375 frames in 5.0 seconds = 74.947 FPS
376 frames in 5.0 seconds = 75.143 FPS
376 frames in 5.0 seconds = 75.144 FPS
376 frames in 5.0 seconds = 75.143 FPS

-Display-
Resolution : 1024x768 pixels
Vendor : The X.Org Foundation
Version : 1.9.5
-Monitors-
Monitor 0 : 1024x768 pixels

-OpenGL-
Vendor : Tungsten Graphics, Inc
Renderer : Mesa DRI Intel(R) 865G x86/MMX/SSE2
Version : 1.3 Mesa 7.10.2
Direct Rendering : Yes

1.3 Mesa 7.10.2

-Computer-
Processor : Intel(R) Pentium(R) 4 CPU 2.80GHz
Memory : 512MB (139MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Thu 05 Jul 2012 11:22:19 PM CDT
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Mesa DRI Intel(R) 865G x86/MMX/SSE2
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : ICH4 - Intel ICH5

James C · Joined: 26 Mar 2009 Posts: 4737 Location: Kentucky

Went ahead and did a quick frugal install......looking good so far. Smile

Jim1911 · Joined: 19 May 2008 Posts: 2353 Location: Texas, USA

Frugal installation on an ext4 partition running fine with my usual applications.

Cheers,
Jim Very Happy

shinobar · Joined: 28 May 2009 Posts: 2249 Location: Japan

shinobar · Joined: 28 May 2009 Posts: 2249 Location: Japan

On the (u)rxvt, type 'ls /dev' shows yellow character on white background, hard to read.
Made a pet replacing the /root/.Xdefaults.
rxvt-color-fix-20120706.pet
http://shino.pos.to/party/bridge.cgi?puppy/slacko/opt/

See also another collection for slacko:
http://www.murga-linux.com/puppy/viewtopic.php?p=638599#638599

shinobar · Joined: 28 May 2009 Posts: 2249 Location: Japan

Radky's most recent PupControl-2.1 seems fine.
http://www.murga-linux.com/puppy/viewtopic.php?t=61961

But i made a small change for the frugalinstaller:
PupControl-2.1.20120706.pet
http://shino.pos.to/party/bridge.cgi?puppy/slacko/opt/

EDIT: PupControl-2.2.pet is now available.

ETP · Joined: 19 Oct 2010 Posts: 306 Location: UK

Fresh manual frugal install to FAT32 USB2 flash. Ext4 save - syslinux 4.04 boot.

Initial boot to desktop with working sound & wired ethernet. Correct res of 1280x1024 with nouveau driver.
Installed T'bird, wallpaper and extra fonts. The following pets were then loaded & tested:

Happy to report no problems. In particular shinobar's Nvidia pet which he produced with his getnvidia-0.5 worked a treat.

Link to full size image: http://postimage.org/image/53hxydai3/

shinobar · Joined: 28 May 2009 Posts: 2249 Location: Japan

Do you know the /etc/fonts/fonts.conf on the slacko has the 'Artificial oblique, so you can remove the file DejaVuSans-Oblique.ttf from /usr/share/fonts/default/TTF?

The fonts-conf-artificial-bold-1.pet replaces the /etc/fonts/fonts.conf to enable also 'Artificial bold', so that you can remove DejaVuSans-Bold.ttf, DejaVuSans-BoldOblique.ttf and DejaVuSans-Oblique.ttf, that is you need only 1 file - DejaVuSans.ttf.
http://shino.pos.to/party/bridge.cgi?puppy/slacko/opt/

Only one problem is the Abiword cannot support Bold nor Italic for Sans and the DejaVu font.

You need to run 3 command to refresh the fomt.dir and fonts.scale after you remove the fonts:

playdayz · Joined: 25 Apr 2008 Posts: 3705

The Help -> Contents in Gnumeric is not working for me. I don't understand why. The error message is that "yelp" is not present. But as I recall it worked in Lucid from the beginning (before the gvfs fix)--didn't it also work in previous versions of Slacko? And of course Slacko does not use the same gvfs as Lucid--rather Slacko uses a fix to glib, as I understand it. Could this be a compile option? A really dirty hack is to create a file "yelp" that starts defaultbrowser pointed at http://projects.gnome.org/gnumeric/doc/gnumeric.shtml which works but would give a problem if any other program tried to use yelp.

I am afraid I may have forgotten something about how we fixed it in Lucid, but I can't find any preferences or rc files. One program needed "sensible-browser" as a link to defaultbrowser but I think that was Gimp, and Lucid doesn't have it anyway and the Help in Gnumeric still works. Maybe someone knows....

bigpup · Posted: Fri 06 Jul 2012, 15:34 Post subject:

Slacko 5.3.3.2 frugal install + save file to hard drive.

Grub4dos Bootloader has 3 entries:
menu->System
menu->System->System status and Config
menu->Setup

menu->Utility->Icon Browser
This program runs, but does not seem to do anything. What is it suppose to do?

shinobar · Joined: 28 May 2009 Posts: 2249 Location: Japan

shinobar · Joined: 28 May 2009 Posts: 2249 Location: Japan

The puppy has many network tools and it makes somewhat complex.
We know the issue on the compatibility between network-wizard and the frisbee, but also between the SNS and Networkwizard is a bit complex.

Japanese editions take the Dugal's Networkwizard as the standard, and the SNS and Frisbee optional.

net-setup-20120707.pet has a modified connectwizard that supports easy to install the optional network tools. See the screenshot.
Need to place the optional pets at /usr/local/Frisbee and /usr/local/simple_network_setup. Then the connectwizard finds the optional pets.

net-setup-20120707.pet also has a slight update at /etc/rc.d/rc.network, wait the eth0 interface settles. You also need to modify the /etc/rc.d/rc.sysinit to enable this improvement.

net-setup-20120707.pet is available at:
http://shino.pos.to/party/bridge.cgi?puppy/slacko/opt/
rc_sysinit-net-setup.patch, Frisbee_beta-2.4-spup.pet and sns-120324.pet is at:
http://shino.pos.to/party/bridge.cgi?puppy/slacko/misc/
Of course you need to remove all the contents under /usr/local/simple_network_setup to disable SNS. and the file /usr/local/Frisbee_pack1,tar.gz is not usable.

shinobar · Joined: 28 May 2009 Posts: 2249 Location: Japan

i made a remastered slacko so that you can see how it works.
61ab170d775746c14208d369865aafec slacko-5.3.3.2r1.iso
http://shino.pos.to/party/bridge.cgi?puppy/slacko/remastered/

It is pre-installed all (but before 08-Jul-2012) the PET's here:
http://shino.pos.to/party/bridge.cgi?puppy/slacko/opt/
And some tweeks here:
http://shino.pos.to/party/bridge.cgi?puppy/slacko/misc/
The Live CD has graphical boot menu following the article:
http://www.murga-linux.com/puppy/viewtopic.php?t=61132

Add some but nothing removed from the original. The reason the size is smaller is maybe the difference of the compression.
I guess i can slim it down, the fonts, icons and etc.

EDIT: A mystery for me, some stuff under /root in Extract-makepet-1.0.pet is missing in the remastered.
Recommended to re-install the Extract-makepet-1.0.pet.
Also install new arrived gdmap-right-click-1.pet and transmission-2.51-i486-supx.pet.