Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Tue 21 Nov 2017, 08:22
All times are UTC - 4
 Forum index » Advanced Topics » Hardware » Networking » Wireless
Broadcom-STA "wl" wifi drivers
Post new topic   Reply to topic View previous topic :: View next topic
Page 12 of 15 [214 Posts]   Goto page: Previous 1, 2, 3, ..., 10, 11, 12, 13, 14, 15 Next
Author Message
belham2

Joined: 15 Aug 2016
Posts: 1303

PostPosted: Tue 11 Oct 2016, 12:18    Post subject:  

ozsouth wrote:
Broadcom module for Fluxpup 1.6.1 k3.9.11pae available via link http://s000.tinyupload.com/?file_id=00523049224911719017
Need to skiplist b43, bcma, brcmsmac, ssb (in /etc/rc.d/MODULESCONFIG). Then copy wl.ko to /lib/modules/3.9.11/kernel/drivers/net/wireless.
Then run depmod in terminal & reboot. Connect via SNS. Will show as eth1 (most likely).



Ozsouth,

Dumb question: when you say 'skiplist', what do you mean? It is like (or the same) when we north-of-the-equator simians say "blacklist" b43, brcm, etc in a blacklist/conf file? Or am I typing "SKIPLIST=" in front of each one of those you mentioned. When I type 'skiplist' in Google, all Google brings back is posts from Murga-Linux written by you antipodean linguists.. Haha! Smile Very Happy
Back to top
View user's profile Send private message 
Semme


Joined: 07 Aug 2011
Posts: 7775
Location: World_Hub

PostPosted: Tue 11 Oct 2016, 12:39    Post subject:    

Open the file he referenced..
Quote:
#SKIPLIST: May need to simply skip some modules...
#Note: Make sure SKIPLIST has space chars on the beginning and end.
SKIPLIST=" arcfb cirrusfb cyber2000fb cyblafb hgafb neofb pm2fb s1d13xxxfb sstfb tdfxfb tridentfb vga16fb aty128fb atyfb radeonfb i810fb intelfb kyrofb nvidiafb rivafb savagefb sisfb btaudio es1371 i810_audio kahlua trident ub usbkbd usbmouse via82cxxx_audio "
Back to top
View user's profile Send private message 
ozsouth

Joined: 01 Jan 2010
Posts: 254
Location: S.E Australia

PostPosted: Tue 11 Oct 2016, 17:08    Post subject:  

Skiplisting is what I do because it's simple, but Peebee's latest .pet files set up blacklisting & reloading as well as providing a driver. My problem was that the driver either didn't exist or had failed.
Back to top
View user's profile Send private message 
ozsouth

Joined: 01 Jan 2010
Posts: 254
Location: S.E Australia

PostPosted: Sat 31 Dec 2016, 02:51    Post subject: Xenialpup64 7.0.7 wl driver  

Available via link below. Need to skiplist b43, bcma, brcmsmac, ssb (in /etc/rc.d/MODULESCONFIG). Then copy wl.ko to /lib/modules/4.6.3/kernel/drivers/net/wireless. Then run depmod in terminal & reboot. Connect via SNS. http://s000.tinyupload.com/?file_id=00929314299133763917
Back to top
View user's profile Send private message 
Puppyt

Joined: 09 May 2008
Posts: 756
Location: Gatton, Queensland

PostPosted: Sun 15 Jan 2017, 01:07    Post subject:  

Thanks ozsouth, from an antipodean simian closer to the equator than your good self - your instructions and wl.ko, skiplist modifications worked OOTB for my Broadcom4360 wifi in a pristine install of XenialPup64 (linux 4.6.3), Posting from it now. Cheers!
broadcom4360xenial.jpg
 Description   
 Filesize   82.57 KB
 Viewed   427 Time(s)

broadcom4360xenial.jpg


_________________
What I get up to when I'm not on the Puppy Linux Murga forum:
http://scholar.google.com/citations?user=EMQxfgYAAAAJ
Back to top
View user's profile Send private message Visit poster's website 
ozsouth

Joined: 01 Jan 2010
Posts: 254
Location: S.E Australia

PostPosted: Sun 15 Jan 2017, 01:25    Post subject:  

Glad it was useful. Haven't seen much of Qld - enjoyed Caloundra last year tho.
Back to top
View user's profile Send private message 
ozsouth

Joined: 01 Jan 2010
Posts: 254
Location: S.E Australia

PostPosted: Sun 30 Jul 2017, 15:30    Post subject: wl driver for Tahrpup64 6.0.6 k 3.14.79  

Broadcom module for Tahrpup64 k3.14.79 available via link
http://s000.tinyupload.com/?file_id=67170278768141797896

Need to skiplist b43, bcma, brcmsmac, ssb (in /etc/rc.d/MODULESCONFIG). Then copy wl.ko to /lib/modules/3.14.79/kernel/drivers/net/wireless.
Then run depmod in terminal & reboot. Connect via SNS. Will show as eth1 (most likely).
Back to top
View user's profile Send private message 
Puppyt

Joined: 09 May 2008
Posts: 756
Location: Gatton, Queensland

PostPosted: Mon 14 Aug 2017, 06:18    Post subject:  

Cheers ozsouth Smile just the ticket I think for my current project to get a Lenovo x130e ThinkPad properly functional with TahrPup64. Hitting all sorts of problems but forgot about the Broadcom recalcitrance regarding Linux wifi. This should solve the biggest hurdle I have (Broadcom BCM432224 card) - thanks again!

UPDATE: 10 minutes later, and it was close, but not quite, after a reboot. No networks detected by SNS, NW or Frisbee unfortunately. Eth1 is up, but Bus and Description variables are only filled by an 'x' (in SNS). I'm running TahrPup64 6.0.6 live from a USB. Totally beyond my ken at present, but thanks.

_________________
What I get up to when I'm not on the Puppy Linux Murga forum:
http://scholar.google.com/citations?user=EMQxfgYAAAAJ
Back to top
View user's profile Send private message Visit poster's website 
ozsouth

Joined: 01 Jan 2010
Posts: 254
Location: S.E Australia

PostPosted: Mon 14 Aug 2017, 16:55    Post subject:  

My card is a BCM43142 (single-band - yours is dual - Relevance?). The x descriptor doesn't stop mine working. Unfortunately, I'm a long way from my home PC (Edinburgh) & my house-sitter is a Windows person.
Back to top
View user's profile Send private message 
Puppyt

Joined: 09 May 2008
Posts: 756
Location: Gatton, Queensland

PostPosted: Tue 15 Aug 2017, 01:55    Post subject:  

Hi ozsouth - at uni at present, away from that project (it has many issues) but I wonder from this link https://wiki.debian.org/brcm80211 if I don't have to sink the brcmsmac in MODULESCONFIG ?
_________________
What I get up to when I'm not on the Puppy Linux Murga forum:
http://scholar.google.com/citations?user=EMQxfgYAAAAJ
Back to top
View user's profile Send private message Visit poster's website 
ozsouth

Joined: 01 Jan 2010
Posts: 254
Location: S.E Australia

PostPosted: Tue 15 Aug 2017, 12:55    Post subject: brcmsmac  

This is where it gets messy. brcmsmac supposedly drives my card, but experience shows me that even when it is showing as loaded, it doesn't work. Tried newer firmware - still no go. It is possible to blacklist as listed in earlier posts, including wl as blacklisted, then modprobe brcmsmac. May work. Sorry, but these chips are very hit n miss, & I've bumbled my way through to some success. How old is the unit you have? May need an older source. I have seen an old AMD that needed that.
Back to top
View user's profile Send private message 
Puppyt

Joined: 09 May 2008
Posts: 756
Location: Gatton, Queensland

PostPosted: Tue 15 Aug 2017, 17:03    Post subject:  

Gosh it *is* complicated - I had no idea. Anyway my quick'n'dirty experiment to re-list brcmsmac didn't work (of course). Dunno if it helps, but on the card itself I have details like BCM943224HMS IC: 4324A-BRCM1041, Year/ month: 207
No rush with this issue,I appreciate your help. Maybe I could try something like Mint 14-ish that is claimed to work OOTB in this x130e setup, and reverse-engineer a driver solution for Puppy flavours? Cheers

_________________
What I get up to when I'm not on the Puppy Linux Murga forum:
http://scholar.google.com/citations?user=EMQxfgYAAAAJ
Back to top
View user's profile Send private message Visit poster's website 
boof

Joined: 26 Sep 2012
Posts: 403

PostPosted: Wed 16 Aug 2017, 18:38    Post subject:  

Please help resolve my post <How to patch and make a wifi driver> or pleae create me a suitable driver and post it as a pet?
Back to top
View user's profile Send private message 
ozsouth

Joined: 01 Jan 2010
Posts: 254
Location: S.E Australia

PostPosted: Thu 17 Aug 2017, 18:03    Post subject:  

What is needed is:
The broadcom source (tar.gz)
The devx for your distro (sfs)
The source for your kernel (sfs).
The last 2 are loaded by clicking on them in ROX-Filer.
Then the first is expanded in a sub-folder called hybrid_wl.
Then switch to hybrid_wl in a terminal & run make.
wl.ko should eventually be produced.
Unload sfs 's above.
Earlier posts link broadcom source & illustrate what to do with wl.ko.
I don't have access to these things at present.

Last edited by ozsouth on Fri 08 Sep 2017, 20:53; edited 1 time in total
Back to top
View user's profile Send private message 
boof

Joined: 26 Sep 2012
Posts: 403

PostPosted: Sun 20 Aug 2017, 03:48    Post subject:  

Got hybrid-v35-64-nodebug-pcoem-6_30_223_271.tar.gz from Broadcom.com
expanded into ~/hybrid-sta/
installed both sfs files
ran <make> in terminal in /Downloads/hybrid-sta/

result ::


/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:350:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(136, 0), CHAN5G(138, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[53].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:350:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(136, 0), CHAN5G(138, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:351:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(140, 0), CHAN5G(142, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[54].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:351:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(140, 0), CHAN5G(142, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:351:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(140, 0), CHAN5G(142, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[55].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:351:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(140, 0), CHAN5G(142, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:352:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(144, 0), CHAN5G(145, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[56].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:352:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(144, 0), CHAN5G(145, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:352:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(144, 0), CHAN5G(145, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[57].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:352:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(144, 0), CHAN5G(145, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:353:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(146, 0), CHAN5G(147, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[58].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:353:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(146, 0), CHAN5G(147, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:353:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(146, 0), CHAN5G(147, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[59].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:353:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(146, 0), CHAN5G(147, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:354:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(148, 0), CHAN5G(149, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[60].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:354:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(148, 0), CHAN5G(149, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:354:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(148, 0), CHAN5G(149, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[61].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:354:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(148, 0), CHAN5G(149, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:355:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(150, 0), CHAN5G(151, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[62].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:355:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(150, 0), CHAN5G(151, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:355:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(150, 0), CHAN5G(151, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[63].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:355:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(150, 0), CHAN5G(151, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:356:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(152, 0), CHAN5G(153, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[64].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:356:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(152, 0), CHAN5G(153, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:356:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(152, 0), CHAN5G(153, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[65].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:356:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(152, 0), CHAN5G(153, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:357:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(154, 0), CHAN5G(155, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[66].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:357:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(154, 0), CHAN5G(155, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:357:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(154, 0), CHAN5G(155, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[67].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:357:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(154, 0), CHAN5G(155, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:358:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(156, 0), CHAN5G(157, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[68].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:358:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(156, 0), CHAN5G(157, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:358:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(156, 0), CHAN5G(157, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[69].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:358:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(156, 0), CHAN5G(157, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:359:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(158, 0), CHAN5G(159, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[70].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:359:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(158, 0), CHAN5G(159, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:359:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(158, 0), CHAN5G(159, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[71].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:359:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(158, 0), CHAN5G(159, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:360:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(160, 0), CHAN5G(161, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[72].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:360:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(160, 0), CHAN5G(161, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:360:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(160, 0), CHAN5G(161, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[73].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:360:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(160, 0), CHAN5G(161, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:361:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(162, 0), CHAN5G(163, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[74].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:361:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(162, 0), CHAN5G(163, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:361:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(162, 0), CHAN5G(163, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[75].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:361:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(162, 0), CHAN5G(163, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:362:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(164, 0), CHAN5G(165, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[76].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:362:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(164, 0), CHAN5G(165, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:362:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(164, 0), CHAN5G(165, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[77].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:362:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(164, 0), CHAN5G(165, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:363:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(166, 0), CHAN5G(168, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[78].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:363:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(166, 0), CHAN5G(168, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:363:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(166, 0), CHAN5G(168, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[79].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:363:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(166, 0), CHAN5G(168, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:364:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(170, 0), CHAN5G(172, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[80].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:364:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(170, 0), CHAN5G(172, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:364:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(170, 0), CHAN5G(172, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[81].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:364:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(170, 0), CHAN5G(172, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:365:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(174, 0), CHAN5G(176, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[82].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:365:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(174, 0), CHAN5G(176, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:365:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(174, 0), CHAN5G(176, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[83].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:365:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(174, 0), CHAN5G(176, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:366:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(178, 0), CHAN5G(180, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[84].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:366:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(178, 0), CHAN5G(180, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:366:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(178, 0), CHAN5G(180, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[85].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:366:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(178, 0), CHAN5G(180, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:367:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(182, 0), CHAN5G(184, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[86].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:367:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(182, 0), CHAN5G(184, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:367:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(182, 0), CHAN5G(184, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[87].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:367:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(182, 0), CHAN5G(184, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:368:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(186, 0), CHAN5G(188, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[88].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:368:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(186, 0), CHAN5G(188, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:368:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(186, 0), CHAN5G(188, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[89].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:368:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(186, 0), CHAN5G(188, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:369:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(190, 0), CHAN5G(192, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[90].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:369:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(190, 0), CHAN5G(192, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:369:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(190, 0), CHAN5G(192, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[91].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:369:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(190, 0), CHAN5G(192, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:370:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(194, 0), CHAN5G(196, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[92].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:370:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(194, 0), CHAN5G(196, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:370:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(194, 0), CHAN5G(196, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[93].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:370:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(194, 0), CHAN5G(196, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:371:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(198, 0), CHAN5G(200, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[94].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:371:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(198, 0), CHAN5G(200, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:371:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(198, 0), CHAN5G(200, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[95].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:371:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(198, 0), CHAN5G(200, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:372:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(202, 0), CHAN5G(204, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[96].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:372:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(202, 0), CHAN5G(204, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:372:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(202, 0), CHAN5G(204, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[97].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:372:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(202, 0), CHAN5G(204, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:373:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(206, 0), CHAN5G(208, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[98].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:373:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(206, 0), CHAN5G(208, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:373:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(206, 0), CHAN5G(208, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[99].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:373:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(206, 0), CHAN5G(208, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:374:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(210, 0), CHAN5G(212, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[100].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:374:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(210, 0), CHAN5G(212, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:374:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(210, 0), CHAN5G(212, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[101].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:374:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(210, 0), CHAN5G(212, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:375:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(214, 0), CHAN5G(216, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[102].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:375:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(214, 0), CHAN5G(216, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:375:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(214, 0), CHAN5G(216, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[103].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:375:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(214, 0), CHAN5G(216, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:376:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(218, 0), CHAN5G(220, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[104].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:376:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(218, 0), CHAN5G(220, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:376:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(218, 0), CHAN5G(220, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[105].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:376:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(218, 0), CHAN5G(220, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:377:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(222, 0), CHAN5G(224, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[106].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:377:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(222, 0), CHAN5G(224, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:377:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(222, 0), CHAN5G(224, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[107].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:377:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(222, 0), CHAN5G(224, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:378:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(226, 0), CHAN5G(228, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[108].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:378:2: note: in expansion of macro ‘CHAN5G’
CHAN5G(226, 0), CHAN5G(228, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:378:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(226, 0), CHAN5G(228, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:248:12: note: (near initialization for ‘__wl_5ghz_n_channels[109].band’)
.band = IEEE80211_BAND_5GHZ, \
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:378:18: note: in expansion of macro ‘CHAN5G’
CHAN5G(226, 0), CHAN5G(228, 0),
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:382:10: error: initializer element is not constant
.band = IEEE80211_BAND_2GHZ,
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:382:10: note: (near initialization for ‘__wl_band_2ghz.band’)
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:390:10: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ,
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:390:10: note: (near initialization for ‘__wl_band_5ghz_a.band’)
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:398:10: error: initializer element is not constant
.band = IEEE80211_BAND_5GHZ,
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:398:10: note: (near initialization for ‘__wl_band_5ghz_n.band’)
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_alloc_wdev’:
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:1879:20: error: array subscript is not an integer
wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = &__wl_band_2ghz;
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:1879:2: warning: statement with no effect [-Wunused-value]
wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = &__wl_band_2ghz;
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:1880:20: error: array subscript is not an integer
wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = &__wl_band_5ghz_a;
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:1880:2: warning: statement with no effect [-Wunused-value]
wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = &__wl_band_5ghz_a;
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_inform_single_bss’:
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:2002:3: error: incompatible type for argument 2 of ‘ieee80211_channel_to_frequency’
(notif_bss_info->channel <= CH_MAX_2G_CHANNEL) ?
^
In file included from /root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
./include/net/cfg80211.h:3869:5: note: expected ‘enum nl80211_band’ but argument is of type ‘struct ieee80211_channel *’
int ieee80211_channel_to_frequency(int chan, enum nl80211_band band);
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:2001:7: warning: assignment makes integer from pointer without a cast [-Wint-conversion]
freq = ieee80211_channel_to_frequency(notif_bss_info->channel,
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_notify_connect_status’:
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:2119:9: warning: assignment makes integer from pointer without a cast [-Wint-conversion]
band = (chan <= CH_MAX_2G_CHANNEL) ? IEEE80211_BAND_2GHZ : IEEE80211_BAND_5G
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_ch_to_chanspec’:
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:2253:18: warning: comparison between pointer and integer
if (chan->band == IEEE80211_BAND_2GHZ) {
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:2256:23: warning: comparison between pointer and integer
else if (chan->band == IEEE80211_BAND_5GHZ) {
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_bss_connect_done’:
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:2390:40: warning: passing argument 2 of ‘cfg80211_scan_done’ makes pointer from integer without a cast [-Wint-conversion]
cfg80211_scan_done(wl->scan_request, true);
^
In file included from /root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
./include/net/cfg80211.h:4304:6: note: expected ‘struct cfg80211_scan_info *’ but argument is of type ‘int’
void cfg80211_scan_done(struct cfg80211_scan_request *request,
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_update_wiphybands’:
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:2888:15: error: array subscript is not an integer
wiphy->bands[IEEE80211_BAND_5GHZ] = &__wl_band_5ghz_n;
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:2888:3: warning: statement with no effect [-Wunused-value]
wiphy->bands[IEEE80211_BAND_5GHZ] = &__wl_band_5ghz_n;
^
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_cfg80211_down’:
/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:2916:40: warning: passing argument 2 of ‘cfg80211_scan_done’ makes pointer from integer without a cast [-Wint-conversion]
cfg80211_scan_done(wl->scan_request, true);
^
In file included from /root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
./include/net/cfg80211.h:4304:6: note: expected ‘struct cfg80211_scan_info *’ but argument is of type ‘int’
void cfg80211_scan_done(struct cfg80211_scan_request *request,
^
scripts/Makefile.build:293: recipe for target '/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.o' failed
make[2]: *** [/root/Downloads/hybrid-sta/src/wl/sys/wl_cfg80211_hybrid.o] Error 1
Makefile:1490: recipe for target '_module_/root/Downloads/hybrid-sta' failed
make[1]: *** [_module_/root/Downloads/hybrid-sta] Error 2
make[1]: Leaving directory '/usr/src/linux'
Makefile:159: recipe for target 'all' failed
make: *** [all] Error 2

A file called <built-in.o> was created and left in hybrid-sta. ditto for hybrid-wl

is this all ok or is something wrong?

EDIT #1.
using PPM I installed broadcom-sta-dkms--installed ok with no missing dependencies, but doesn't seem to have provided a new driver I can use.
not sure how to proceed.
Back to top
View user's profile Send private message 
Display posts from previous:   Sort by:   
Page 12 of 15 [214 Posts]   Goto page: Previous 1, 2, 3, ..., 10, 11, 12, 13, 14, 15 Next
Post new topic   Reply to topic View previous topic :: View next topic
 Forum index » Advanced Topics » Hardware » Networking » Wireless
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.1129s ][ Queries: 14 (0.0074s) ][ GZIP on ]