Broadcom-STA "wl" wifi drivers
Welcome. I don't have the 64 bit Tahrpup, but peebee's .pet (the amd64 version) should be able to be downloaded (from the smokey01 site) & installed via file manager (just click on the .pet - takes under a minute).
That should automatically do the necessary blacklisting of conflicting modules. A reboot is then required (save session if frugal install). Then the connect tool (choosing simple network setup) should offer you wlan0 to connect to. Hope that helps.
That should automatically do the necessary blacklisting of conflicting modules. A reboot is then required (save session if frugal install). Then the connect tool (choosing simple network setup) should offer you wlan0 to connect to. Hope that helps.
-
- Posts: 2
- Joined: Mon 15 Feb 2016, 00:16
Wow, works great! Thanks so much. This is really awesome.ozsouth wrote:Welcome. I don't have the 64 bit Tahrpup, but peebee's .pet (the amd64 version) should be able to be downloaded (from the smokey01 site) & installed via file manager (just click on the .pet - takes under a minute).
That should automatically do the necessary blacklisting of conflicting modules. A reboot is then required (save session if frugal install). Then the connect tool (choosing simple network setup) should offer you wlan0 to connect to. Hope that helps.
Thanks @ozsouth for the clear instructions.bdkemp1952 wrote:Wow, works great! Thanks so much. This is really awesome.ozsouth wrote:Hope that helps.
Glad it works for you @bdkemp1952
666philb has now uploaded the pets to the tahrpup repositories so they should be available via his excellent download and update mechanisms so I'll remove the link to smokey01
Cheers
peebee
p.s. @mavrothal made the 64 bit pet so thanks are also due to him
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
PPM made me uninstall the multi-kernel pet on page 1 due to kernel incompatibility. Are there any made for:
#Note: Ubuntu 14.10 is named Utopic Unicorn.
DISTRO_NAME='Quirky Unicorn'
#version number of this distribution:
DISTRO_VERSION=6.2.1
#The distro whose binary packages were used to build this distribution:
DISTRO_BINARY_COMPAT='ubuntu'
DISTRO_COMPAT_VERSION='utopic'
#the kernel pet package used:
DISTRO_KERNEL_PET='linux_kernel-3.16.6-nopae-builtin_aufs_f2fs_squashfs_zram-i586-unicorn.pet'
Just bought a new HP Stream and really need that wifi working...
#Note: Ubuntu 14.10 is named Utopic Unicorn.
DISTRO_NAME='Quirky Unicorn'
#version number of this distribution:
DISTRO_VERSION=6.2.1
#The distro whose binary packages were used to build this distribution:
DISTRO_BINARY_COMPAT='ubuntu'
DISTRO_COMPAT_VERSION='utopic'
#the kernel pet package used:
DISTRO_KERNEL_PET='linux_kernel-3.16.6-nopae-builtin_aufs_f2fs_squashfs_zram-i586-unicorn.pet'
Just bought a new HP Stream and really need that wifi working...
Best I can suggest is follow the HowTo at:slavvo67 wrote:Are there any made for:
DISTRO_KERNEL_PET='linux_kernel-3.16.6-nopae
http://www.murga-linux.com/puppy/viewto ... 946#884946
Being Quirky rather than Puppy, it is not possible to get the correct compiling environment other than by downloading and installing Quirky....
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Sorry...boof wrote:PeeBee
<Here is the 32-bit wl driver for Slacko-6.3.0 k3.14.55-nopae as a .pet:
broadcom_wl_v6.30.223.271_x86_32-k3.14.55_nopae_s630.pet>
== Error 404
Makes life hard.
link should be:
http://www.smokey01.com/peebee/broadcom ... e_s630.pet
Amended in original post.
Slack0-6.3.0 definitely has .xz compression - what system were you using???
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
- openocean555
- Posts: 8
- Joined: Tue 14 Jan 2014, 01:28
Many thanks to PeeBee and all who helped with the 64 bit driver. My Dell inspiron running slacko 6.3 now has wifi. I had a difficult time because I only blacklisted one module. After days of pulling my hair out searching the internet for answers i finally returned here and noticed that PeeBee suggested to blacklist two modules. After I blacklisted the second module it worked perfect. Thanks Again
I have a HP 15 laptop with a Broadcom BCM43142 WiFi card which is not one of the standard devices. I have got it working with TahrPup 6.0.5 following the advice in an earlier post to download a PET.
There seems to be no equivalent PET for Xenial Pup and i wonder if anyone can tell me how I would arrange to get it working with Xenial?
Thanks
...R
There seems to be no equivalent PET for Xenial Pup and i wonder if anyone can tell me how I would arrange to get it working with Xenial?
Thanks
...R
HiRobin2 wrote:I have a HP 15 laptop with a Broadcom BCM43142 WiFi card which is not one of the standard devices. I have got it working with TahrPup 6.0.5 following the advice in an earlier post to download a PET.
There seems to be no equivalent PET for Xenial Pup and i wonder if anyone can tell me how I would arrange to get it working with Xenial?
Thanks
...R
The proprietary wl driver has to be compiled for each kernel - so until XenialPup is released and its kernel version known and fixed there won't be an official wl driver available - bit "chicken and egg" but applies to all drivers that don't come as part of the kernel.
In the meantime you could compile your own - instructions here
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Thanks. I had found those instructions but I am not experienced with that stuff.
I did download the source code but I could not figure out the LINUX_VERSION - firstly because there seem to be several versions mentioned and secondly because the style is unfamilar
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 14)
What do those 3 numbers mean? Does this example mean version 2.6.14? Or are they code numbers of 3 different versions?
In any case, XenialPup uses Kernel 4.5.2 and I could see nothing in the two files mentioned that seems to match that.
I also found this link which seems to suggest that it will work with any kernel version
As far as I can see a successful build or installation should produce a module call wl.ko - but that does not seem to get created by that .deb
Thanks. And any other suggestions will be appreciated.
If I get it working I will be happy to share the result.
...R
I did download the source code but I could not figure out the LINUX_VERSION - firstly because there seem to be several versions mentioned and secondly because the style is unfamilar
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 14)
What do those 3 numbers mean? Does this example mean version 2.6.14? Or are they code numbers of 3 different versions?
In any case, XenialPup uses Kernel 4.5.2 and I could see nothing in the two files mentioned that seems to match that.
I also found this link which seems to suggest that it will work with any kernel version
but, while PuppyPackageManager reports that it installs correctly nothing seems to happen.This will build a Ubuntu package for Ubuntu 14.04 or later. The Kernel module will build automatically for all your installed Kernel versions with the help of DKMS and apply patching as required after the package is installed on the target system.
As far as I can see a successful build or installation should produce a module call wl.ko - but that does not seem to get created by that .deb
Thanks. And any other suggestions will be appreciated.
If I get it working I will be happy to share the result.
...R
Broadcom module for Fluxpup 1.6.1 k3.9.11pae available via link http://s000.tinyupload.com/?file_id=005 ... 4911719017
Need to skiplist b43, bcma, brcmsmac, ssb (in /etc/rc.d/MODULESCONFIG). Then copy wl.ko to /lib/modules/3.9.11/kernel/drivers/net/wireless.
Then run depmod in terminal & reboot. Connect via SNS. Will show as eth1 (most likely).
Need to skiplist b43, bcma, brcmsmac, ssb (in /etc/rc.d/MODULESCONFIG). Then copy wl.ko to /lib/modules/3.9.11/kernel/drivers/net/wireless.
Then run depmod in terminal & reboot. Connect via SNS. Will show as eth1 (most likely).
Tahr 605 nonpae wl alternate
Couldn't get the ibiblio listed wl.ko driver working for tahrpup 6.0.5 no-pae, so I compiled my own.
Available via link http://s000.tinyupload.com/?file_id=038 ... 6945168883
Need to skiplist b43, bcma, brcmsmac, ssb (in /etc/rc.d/MODULESCONFIG). Then copy wl.ko to /lib/modules/3.14.56/kernel/drivers/net/wireless.
Then run depmod in terminal & reboot. Connect via SNS. Will show as eth1 (most likely).
Available via link http://s000.tinyupload.com/?file_id=038 ... 6945168883
Need to skiplist b43, bcma, brcmsmac, ssb (in /etc/rc.d/MODULESCONFIG). Then copy wl.ko to /lib/modules/3.14.56/kernel/drivers/net/wireless.
Then run depmod in terminal & reboot. Connect via SNS. Will show as eth1 (most likely).
ozsouth wrote:Broadcom module for Fluxpup 1.6.1 k3.9.11pae available via link http://s000.tinyupload.com/?file_id=005 ... 4911719017
Need to skiplist b43, bcma, brcmsmac, ssb (in /etc/rc.d/MODULESCONFIG). Then copy wl.ko to /lib/modules/3.9.11/kernel/drivers/net/wireless.
Then run depmod in terminal & reboot. Connect via SNS. Will show as eth1 (most likely).
Ozsouth,
Dumb question: when you say 'skiplist', what do you mean? It is like (or the same) when we north-of-the-equator simians say "blacklist" b43, brcm, etc in a blacklist/conf file? Or am I typing "SKIPLIST=" in front of each one of those you mentioned. When I type 'skiplist' in Google, all Google brings back is posts from Murga-Linux written by you antipodean linguists.. Haha!
Open the file he referenced..
#SKIPLIST: May need to simply skip some modules...
#Note: Make sure SKIPLIST has space chars on the beginning and end.
SKIPLIST=" arcfb cirrusfb cyber2000fb cyblafb hgafb neofb pm2fb s1d13xxxfb sstfb tdfxfb tridentfb vga16fb aty128fb atyfb radeonfb i810fb intelfb kyrofb nvidiafb rivafb savagefb sisfb btaudio es1371 i810_audio kahlua trident ub usbkbd usbmouse via82cxxx_audio "
Xenialpup64 7.0.7 wl driver
Available via link below. Need to skiplist b43, bcma, brcmsmac, ssb (in /etc/rc.d/MODULESCONFIG). Then copy wl.ko to /lib/modules/4.6.3/kernel/drivers/net/wireless. Then run depmod in terminal & reboot. Connect via SNS. http://s000.tinyupload.com/?file_id=009 ... 9133763917
Thanks ozsouth, from an antipodean simian closer to the equator than your good self - your instructions and wl.ko, skiplist modifications worked OOTB for my Broadcom4360 wifi in a pristine install of XenialPup64 (linux 4.6.3), Posting from it now. Cheers!
- Attachments
-
- broadcom4360xenial.jpg
- (82.57 KiB) Downloaded 739 times
Search engines for Puppy
[url]http://puppylinux.us/psearch.html[/url]; [url=https://cse.google.com/cse?cx=015995643981050743583%3Aabvzbibgzxo&q=#gsc.tab=0]Google Custom Search[/url]; [url]http://wellminded.net63.net/[/url] others TBA...
[url]http://puppylinux.us/psearch.html[/url]; [url=https://cse.google.com/cse?cx=015995643981050743583%3Aabvzbibgzxo&q=#gsc.tab=0]Google Custom Search[/url]; [url]http://wellminded.net63.net/[/url] others TBA...