Yes, there is a bug. I will investigate this today.bigpup wrote:Here is a post about booting from live CD and not finding save file on SD card.
The fix was to use this boot option:Is this a bug to require this option?puppy pmedia=usbflash pdev=mmcblk0p1
http://murga-linux.com/puppy/viewtopic.php?t=77027
Wary/Racy 5.3RC2 (5.2.91)
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
[url]https://bkhome.org/news/[/url]
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Sorry, I didn't look closely enough, you are only pinging a ip address, not a url, so it is not yet working.BarryK wrote:I am confused. In your previous post you stated that the change to nsswitch.conf did not work. So, what other change did work?James C wrote:Following that link I can successfully ping the nameserver in /etc/resolv.conf .
# ping 192.168.1.254
PING 192.168.1.254 (192.168.1.254): 56 data bytes
64 bytes from 192.168.1.254: seq=0 ttl=255 time=0.377 ms
64 bytes from 192.168.1.254: seq=1 ttl=255 time=0.374 ms
64 bytes from 192.168.1.254: seq=2 ttl=255 time=0.988 ms
64 bytes from 192.168.1.254: seq=3 ttl=255 time=0.375 ms
64 bytes from 192.168.1.254: seq=4 ttl=255 time=0.386 ms
64 bytes from 192.168.1.254: seq=5 ttl=255 time=0.278 ms
[url]https://bkhome.org/news/[/url]
No proxy servers.....using all default settings.BarryK wrote:Are you connected to the Internet through a proxy server?James C wrote:BarryK wrote: That is strange. This is the relevant code:
Code: Select all
ping -c 1 www.google.com if [ $? -ne 0 ];then INSERT0="<text use-markup="true"><label>"<b>`gettext "Currently not connected to the Internet. If you wish to connect later, you can run this Video Upgrade Wizard again via the 'setup' icon on the desktop or the 'Setup' category in the menu. Note, to connect to the Internet, click 'connect' icon on left of desktop."`</b>"</label></text>" fi
Can you do this in a terminal:
# ping -c 1 www.google.com
# echo $?
In terminal.....
May be related or not, in pemasu's latest Exprimo release I've been experiencing wget problems.Code: Select all
# ping -c 1 www.google.com ping: bad address 'www.google.com' # echo $? 1 #
http://www.murga-linux.com/puppy/viewto ... 599#613599
EDIT:
Just tried to use wget to download Flash (as attempted in the linked Exprimo thread) and it fails in Wary as well.
Code: Select all
# wget http://fpdownload.macromedia.com/get/flashplayer/pdc/11.1.102.63/install_flash_player_11_linux.i386.tar.gz --2012-03-23 21:25:35-- http://fpdownload.macromedia.com/get/flashplayer/pdc/11.1.102.63/install_flash_player_11_linux.i386.tar.gz Resolving fpdownload.macromedia.com (fpdownload.macromedia.com)... failed: Temporary failure in name resolution. wget: unable to resolve host address `fpdownload.macromedia.com' #
Just checked in the latest Precise.... no problems. Video Upgrade works correctly where in Wary it tells me I'm not connected to the internet.
Here is from Precise....
Code: Select all
# ping -c 1 www.google.com
PING www.google.com (74.125.65.103): 56 data bytes
64 bytes from 74.125.65.103: seq=0 ttl=52 time=53.775 ms
--- www.google.com ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max = 53.775/53.775/53.775 ms
# echo $?
0
#
Code: Select all
# ping -c 1 www.google.com
ping: bad address 'www.google.com'
# echo $?
1
#
Code: Select all
# ping 74.125.65.103
PING 74.125.65.103 (74.125.65.103): 56 data bytes
64 bytes from 74.125.65.103: seq=0 ttl=52 time=54.773 ms
64 bytes from 74.125.65.103: seq=1 ttl=52 time=53.948 ms
64 bytes from 74.125.65.103: seq=2 ttl=51 time=54.873 ms
64 bytes from 74.125.65.103: seq=3 ttl=52 time=54.867 ms
64 bytes from 74.125.65.103: seq=4 ttl=52 time=54.821 ms
64 bytes from 74.125.65.103: seq=5 ttl=52 time=54.482 ms
Re: Xdialog
You can use the label-substitution option of Xdialog.L18L wrote:Xdialog - where is yes/no?
Code: Select all
Xdialog --title "Xdialog" --ok-label "Yes" --cancel-label "No" --yesno "The label-substitution option of \n Xdialog will display Yes/No buttons." 0 0
- Attachments
-
- Xdialog_yesno.png
- (7.93 KiB) Downloaded 1215 times
Last edited by radky on Fri 30 Mar 2012, 12:27, edited 1 time in total.
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Ok, fixed. I posted to my blog:BarryK wrote:Yes, there is a bug. I will investigate this today.bigpup wrote:Here is a post about booting from live CD and not finding save file on SD card.
The fix was to use this boot option:Is this a bug to require this option?puppy pmedia=usbflash pdev=mmcblk0p1
http://murga-linux.com/puppy/viewtopic.php?t=77027
http://bkhome.org/blog/?viewDetailed=02771
[url]https://bkhome.org/news/[/url]
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Re: Puppy-Setup: change to UTF-8 does not get permanent
I am not having any problem.L18L wrote:Yes, there is something wrong, I have been trying to reproduce this in a similiar way.LaRioja wrote:I have installed Racy 5.2.90 on my AMD LE 1250 box and chose German locale in the Quick Setup but I accidentally did not tick UTF-8 Encoding. I changed this later in Puppy-Setup, but it doesn't get permanent. So on every reboot I have to change to UTF-8 again.
Is there something wrong?
Thanks for a hint.
racy 5.2.90 pfix=ram
chosen LANG: de_DE (without utf8)
saved to a new save file called racysave-de_DE.2fs
then reboot
and chosen racysave-de_DE.2fs
# cat /proc/cmdline
video=640x480 root=/dev/sda3 ro vga=normal pdev1=sda3
#
# echo $LANG
de_DE.UTF-8
#
repeated chooselocale (de_DE) several times
My observation:
change to non-UTF-8 does not get permanent
I don´t think this is specific to German.
Other languages, please test: changing to/from utf-8
Hope this will help locating the bug
Running as a German user, I used quickcountry (symlink to quicksetup) to untick and tick the UTF-8 checkbox. There was no problem.
The problem may occur if you altered the initrd.gz the first time, to say de_DE-UTF-8, then that will be used at a reboot. QuickCountry/QuickSetup will offer to change the initrd.gz if you change the UTF-8 checkbox.
[url]https://bkhome.org/news/[/url]
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
xgamma-gui
gettexted and changed
Input values from 1 to 100 (not 199)
Input values from 1 to 100 (not 199)
Code: Select all
#!/bin/bash
#Written by PANZERKOPF
#100215 hacked by BK
#120329 i18n
#120330 10.0 = 100 using bc now because: Gamma values must be between 0.100 and 10.000 L18L
. gettext.sh
export TEXTDOMAIN=xgamma-gui
export OUTPUT_CHARSET=UTF-8
TITLE="$(gettext 'Monitor Gamma calibration')"
BACKTITLE="$(gettext 'Set percentage value for each colour,\nor adjust equally if only want to adjust\nbrightness of screen')"
if [ "`which xgamma`" = "" ]; then
Xdialog --title "${TITLE}" --msgbox "$(gettext 'xgamma not found.')" 0 0
exit
fi
GAMMA='100/100/100' # percentages
#file contains one line like this: xgamma -rgamma 1.00 -ggamma 1.00 -bgamma 1.00 #100/100/100
#file contains one line like this: xgamma -rgamma 10.00 -ggamma 9.90 -bgamma 10.00 #100/99/100
[ -f $HOME/.xgamma-gamma ] && GAMMA="`cat $HOME/.xgamma-gamma | cut -f 2 -d '#'`"
EXCODE="0"
while [ "${EXCODE}" = "0" ]; do
if [ ! -z ${xGAMMA} ]; then
echo ${xGAMMA}
#xgamma -rgamma ${xGAMMA:0:1}.${xGAMMA:1:2} -ggamma ${xGAMMA:4:1}.${xGAMMA:5:2} -bgamma ${xGAMMA:8:1}.${xGAMMA:9:2}
rg=`echo ${xGAMMA} | cut -d '/' -f1` ; rgf=`echo "scale=3; $rg / 10" | bc -l`
gg=`echo ${xGAMMA} | cut -d '/' -f2` ; ggf=`echo "scale=3; $gg / 10" | bc -l`
bg=`echo ${xGAMMA} | cut -d '/' -f3` ; bgf=`echo "scale=3; $bg / 10" | bc -l`
xgamma -rgamma $rgf -ggamma $ggf -bgamma $bgf
sGAMMA=${xGAMMA}
xgamma
#fi
else # inclusion of this block is new
#echo GAMMA=$GAMMA
rg=`echo ${GAMMA} | cut -d '/' -f1` ; rgf=`echo "scale=3; $rg / 10" | bc -l`
gg=`echo ${GAMMA} | cut -d '/' -f2` ; ggf=`echo "scale=3; $gg / 10" | bc -l`
bg=`echo ${GAMMA} | cut -d '/' -f3` ; bgf=`echo "scale=3; $bg / 10" | bc -l`
fi
# xGAMMA=`Xdialog --screen-center --left --backtitle "${BACKTITLE}" --title "${TITLE}" --stdout --buttons-style "text" --icon "/usr/share/images/xgamma-gui.xpm" --ok-label "$(gettext 'Apply')" --cancel-label "$(gettext 'Exit')" \
#--3spinsbox "" 0 0 "0" "199" "${GAMMA:0:3}" "$(gettext 'Red')" "0" "199" "${GAMMA:4:3}" "$(gettext 'Green')" "0" "199" "${GAMMA:8:3}" "$(gettext 'Blue')"`
xGAMMA=`Xdialog --screen-center --left --backtitle "${BACKTITLE}" --title "${TITLE}" --stdout --buttons-style "text" --icon "/usr/share/images/xgamma-gui.xpm" --ok-label "$(gettext 'Apply')" --cancel-label "$(gettext 'Exit')" \
--3spinsbox "" 0 0 "0" "100" "${rg}" "$(gettext 'Red')" "0" "100" "${gg}" "$(gettext 'Green')" "0" "100" "${bg}" "$(gettext 'Blue')"`
EXCODE=${?}
done
if [ ! -z ${sGAMMA} ]; then
#Xdialog --yesno "$(gettext 'Save current configuration?')" 0 0
Xdialog --ok-label "$(gettext 'Yes')" --cancel-label "$(gettext 'No')" --yesno "$(gettext 'Save current configuration?')" 0 0
if [ ${?} -eq 0 ]; then
#echo -n "xgamma -rgamma ${sGAMMA:0:1}.${sGAMMA:1:2} -ggamma ${sGAMMA:4:1}.${sGAMMA:5:2} -bgamma ${sGAMMA:8:1}.${sGAMMA:9:2}"' &' > $HOME/.xgamma-gamma
#echo -n "xgamma -rgamma $rg -ggamma $gg -bgamma $bg"' &' > $HOME/.xgamma-gamma
echo -n "xgamma -rgamma $rgf -ggamma $ggf -bgamma $bgf"' &' > $HOME/.xgamma-gamma
echo " #${sGAMMA}" >> $HOME/.xgamma-gamma
#...xgamma is executed in /root/.xinitrc
echo "$(gettext 'Saved')"
#ummm, but if defaults, don't need xgamma...
[ "$sGAMMA" = "100/100/100" ] && rm -f $HOME/.xgamma-gamma #saves time in .xinitrc
fi
fi
###END###
Thanks. The attached file contains the remaining fixes, you can replace the files in Woof by those in this .tar.gz so that you don't have to open and edit each file individually:BarryK wrote:Ok, I have removed the "Name[es]" entry from rootfs-skeleton/usr/share/applications/Bcrypt-file-encryption.desktop in Woof.vicmz wrote:unable to fix wrong translations in menus
just one example:
the Bcrypt entry should say 'cifrado de archivos' (file encryption), the existing translation says 'encriptado de aplicaciones' (application encryption) -- the word 'encriptar', is so un-Spanish
langpack_es installs the new translations, but existing fuzzy translations remain
I will upload Woof soon.
- Attachments
-
- es_menufixes.tar.gz
- (4.95 KiB) Downloaded 587 times
[url=http://murga-linux.com/puppy/viewtopic.php?t=76948]Puppy Linux en español[/url]
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
I have uploaded Wary and Racy 5.2.91 (5.3RC2), see announcement:
http://bkhome.org/blog/?viewDetailed=02774
The last two posts above got missed out. Sorry, I will look at those soon, thanks for the info.
http://bkhome.org/blog/?viewDetailed=02774
The last two posts above got missed out. Sorry, I will look at those soon, thanks for the info.
[url]https://bkhome.org/news/[/url]
Any chance of a faster place to download Wary/Racy.
At other download sites for puppies: I can get similar sized puppies in about 4 minutes My brother can download them about as fast as he can click his mouse.
It takes more than 20 minutes to download a standard sized puppy from the ibiblio site, no matter how fast our personal connections are.
Would you consider allowing wary/racy to also be hosted at one of these faster download locations?
Pete
It takes more than 20 minutes to download a standard sized puppy from the ibiblio site, no matter how fast our personal connections are.
Would you consider allowing wary/racy to also be hosted at one of these faster download locations?
Pete
- broomdodger
- Posts: 279
- Joined: Sat 10 May 2008, 02:38
- Location: Santa Cruz, CA
flash 11.r202 not working
flash 11.r202 not working
racy5291
frugal manual
automatic flash install
flash 11.r202 not working
delete /usr/lib/mozilla/plugins/libflashplayer.so
copy flash 11.r102 from racy5290
flash 11.r102 is working
racy5291
frugal manual
automatic flash install
flash 11.r202 not working
delete /usr/lib/mozilla/plugins/libflashplayer.so
copy flash 11.r102 from racy5290
flash 11.r102 is working
Re: flash 11.r202 not working
I have upgraded to Flashplayer 11.2.202.228 which works reliably on Wary and Racy.broomdodger wrote:flash 11.r202 not working
racy5291
frugal manual
automatic flash install
flash 11.r202 not working
delete /usr/lib/mozilla/plugins/libflashplayer.so
copy flash 11.r102 from racy5290
flash 11.r102 is working
[b]Classic Opera 12.16 browser SFS package[/b] for Precise, Slacko, Racy, Wary, Lucid, etc available[url=http://terryphillips.org.uk/operasfs.htm]here[/url] :)
Morning Sage,Sage wrote:Extended d/l times from ibiblio this morning?
The momentary left-click on sr0 disappearing icon feature is back!
Download from this mirror which is must faster than ibiblio:
http://ftp.nluug.nl/ftp/pub/os/Linux/distr/quirky/test/
[b]Classic Opera 12.16 browser SFS package[/b] for Precise, Slacko, Racy, Wary, Lucid, etc available[url=http://terryphillips.org.uk/operasfs.htm]here[/url] :)
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
I think that I sent you a pm to try the '-4' option with wget. Have you tried that?James C wrote:Fresh frugal install of 5.2.91. All basics working on initial boot.
Only problems are those mentioned earlier .... not really that big of a deal.As long as the PPM and browsers work I guess I can live without Wget.....
That is, insert '-4' like this:
# wget -4 <url>
[url]https://bkhome.org/news/[/url]
Re: Any chance of a faster place to download Wary/Racy.
I sugest that you check with your local university to see if they are mirroring some part of ibiblio, if so it should be easy to get them to add a couple of extra's (puppylinux and quirky) if they are not already doing so. You can also always try M.I.T. or Berkley.Pete22 wrote:At other download sites for puppies: I can get similar sized puppies in about 4 minutes My brother can download them about as fast as he can click his mouse.
It takes more than 20 minutes to download a standard sized puppy from the ibiblio site, no matter how fast our personal connections are.
Would you consider allowing wary/racy to also be hosted at one of these faster download locations?
Pete
ibiblio has been slow for some time now, I've found that http://ftp.nluug.nl/ftp/pub/os/Linux/distr/ is often much faster than ibiblio when my local http://mirror.aarnet.edu.au/pub/, here in australia has had problems.
Been busy and forgot .......BarryK wrote:I think that I sent you a pm to try the '-4' option with wget. Have you tried that?James C wrote:Fresh frugal install of 5.2.91. All basics working on initial boot.
Only problems are those mentioned earlier .... not really that big of a deal.As long as the PPM and browsers work I guess I can live without Wget.....
That is, insert '-4' like this:
# wget -4 <url>
Let's try to download Flash.....
Code: Select all
# wget -4 http://fpdownload.macromedia.com/get/flashplayer/pdc/11.1.102.63/install_flash_player_11_linux.i386.tar.gz
--2012-03-31 03:01:37-- http://fpdownload.macromedia.com/get/flashplayer/pdc/11.1.102.63/install_flash_player_11_linux.i386.tar.gz
Resolving fpdownload.macromedia.com (fpdownload.macromedia.com)... 184.87.2.70
Connecting to fpdownload.macromedia.com (fpdownload.macromedia.com)|184.87.2.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 6746733 (6.4M) [application/x-gzip]
Saving to: `install_flash_player_11_linux.i386.tar.gz'
100%[======================================>] 6,746,733 159K/s in 42s
2012-03-31 03:02:18 (158 KB/s) - `install_flash_player_11_linux.i386.tar.gz' saved [6746733/6746733]
#
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Find some bugs guys!
I am merrily using this pup, and apart from a couple of little things that I found right off, all is well. :happy:
There is the mysterious wget/ping failure problem, that so far has only affected one person.
I have some updated langpacks that I will upload soon:
fr 20120330 (esmourguit)
pl 20120327 (robwoj44)
I want to freeze everything, essential bug fixes only. Hold over unessential changes to later. Maybe can get the 5.3-final out in a couple of days?
Anyway, please play with the apps, let us know if anything crashes and burns.
I am merrily using this pup, and apart from a couple of little things that I found right off, all is well. :happy:
There is the mysterious wget/ping failure problem, that so far has only affected one person.
I have some updated langpacks that I will upload soon:
fr 20120330 (esmourguit)
pl 20120327 (robwoj44)
I want to freeze everything, essential bug fixes only. Hold over unessential changes to later. Maybe can get the 5.3-final out in a couple of days?
Anyway, please play with the apps, let us know if anything crashes and burns.
[url]https://bkhome.org/news/[/url]
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
Wary/Racy 5.3RC2 (5.2.91)
Found a little thing, too
- Attachments
-
- truncated_filename.png
- (33.83 KiB) Downloaded 1098 times