How to get Webcams to work in Puppy

How to do things, solutions, recipes, tutorials
Post Reply
Message
Author
User avatar
Indy
Posts: 73
Joined: Wed 01 Feb 2006, 10:52
Location: Sydney, Australia

#16 Post by Indy »

Hi NickBiker,

Your wizard got my webcam to work! Fantastic!

I have a Creative Labs webcam.

At first, I got the same problem as Lobster.

I noticed that I didn't have the /usb/media folders, so I applied the BFI Method (Brute Force and Ignorance), created those folders, then tried your wizard again.

This time, it went all the way to the end and finally saw my smiling face on my monitor.

Thanks!
Top
User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:
Contact Lobster

#17 Post by Lobster »

===========
following Indys advice - got me much further
in fact right through the wizard
BUT the xawtv prog did not work
here are some outputs

Will uninstall and try again later perhaps
Hope others give it a go - once refined this Wiz Wiz needs to be in Puppy
Great piece of work so far
Glad to hear of people having success :)

==========

usb.c: registered new driver quickcam
quickcam: QuickCam USB camera found (driver version QuickCam USB $Date: 2004/07/29 18:12:39 $)
quickcam: Kernel:2.4.29 bus:2 class:FF subclass:FF vendor:046D product:0840
quickcam [49.259775]: poisoning qc in qc_usb_init
quickcam: Probing HDCS-1000/1100: expecting 08, got 40
quickcam: Probing HDCS-1020: expecting 10, got 40
quickcam: Probing PB-0100/0101: expecting 64, got 00
quickcam: Probing VV6410: expecting 19, got 40
quickcam: Probing VV6450: expecting F0, got 40
quickcam: unsupported sensor
quickcam: QuickCam USB camera found (driver version QuickCam USB $Date: 2004/07/29 18:12:39 $)
quickcam: Kernel:2.4.29 bus:2 class:FF subclass:FF vendor:046D product:0840
quickcam [49.271563]: poisoning qc in qc_usb_init
quickcam: Probing HDCS-1000/1100: expecting 08, got 40
quickcam: Probing HDCS-1020: expecting 10, got 40
quickcam: Probing PB-0100/0101: expecting 64, got 00
quickcam: Probing VV6410: expecting 19, got 40
quickcam: Probing VV6450: expecting F0, got 40
quickcam: unsupported sensor


==========

# ./xawtv
This is xawtv-3.95, running on Linux/i686 (2.4.29)
WARNING: Your X-Server has no DGA support.
can't open /dev/video0: No such device
v4l-conf had some trouble, trying to continue anyway
v4l2: open /dev/video0: No such device
v4l2: open /dev/video0: No such device
v4l: open /dev/video0: No such device
no video grabber device available
#
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D
Top
User avatar
NickBiker
Posts: 155
Joined: Wed 01 Mar 2006, 13:06
Location: Guildford, UK
Contact:
Contact NickBiker

#18 Post by NickBiker »

Indy wrote:Hi NickBiker,

Your wizard got my webcam to work! Fantastic!

I have a Creative Labs webcam.

At first, I got the same problem as Lobster.

I noticed that I didn't have the /usb/media folders, so I applied the BFI Method (Brute Force and Ignorance), created those folders, then tried your wizard again.

This time, it went all the way to the end and finally saw my smiling face on my monitor.

Thanks!
Hi!
Great news!!

Yes, a silly error in the wizard checks to see if you can write to the directory, but forgets to check it exisits first! Fixing that and will issue a new wizard!!

Glad it is working. I am looking a doing more webcam apps - like gnome meeting - have you seen any you like/use?
Nick

See my Puppy webcam Guide at:
www.moyo.me.uk/pupplinux
Top
User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:
Contact Lobster

#19 Post by Lobster »

:cry:
One step closer . . .

Tried again this is the output of my camwiz.txt
Could the 3D driver I installed be interfering?

====
Thu May 4 09:20:31 PUP 2006 Welcome to version 1.0
Thu May 4 09:20:33 PUP 2006 /proc/version PASSED
Thu May 4 09:20:33 PUP 2006 OSNAME Linux
Thu May 4 09:20:33 PUP 2006 VERSION 2.4.29
Thu May 4 09:20:33 PUP 2006 Write check passed for .
Thu May 4 09:20:33 PUP 2006 Write check passed for /root/my-documents
Thu May 4 09:20:33 PUP 2006 Write check passed for /usr/lib/modules/usb/media
Thu May 4 09:20:33 PUP 2006 Write check passed for /lib/modules/2.4.29/usb/media
Thu May 4 09:20:33 PUP 2006 Write check passed for /root/my-applications/bin/wiz/
Thu May 4 09:20:33 PUP 2006 Found file passed depmod
Thu May 4 09:20:33 PUP 2006 Found file passed insmod
Thu May 4 09:20:33 PUP 2006 Found file passed rmmod
Thu May 4 09:20:33 PUP 2006 Found file passed mount
Thu May 4 09:20:33 PUP 2006 Found file passed whoami
Thu May 4 09:20:33 PUP 2006 Found file passed chmod
Thu May 4 09:20:33 PUP 2006 Found file passed mknod
Thu May 4 09:20:34 PUP 2006 Found file passed grep
Thu May 4 09:20:34 PUP 2006 Found file passed cat
Thu May 4 09:20:34 PUP 2006 Found file passed awk
Thu May 4 09:20:34 PUP 2006 Found file passed gawk
Thu May 4 09:20:34 PUP 2006 Found file passed wget
Thu May 4 09:20:34 PUP 2006 Found file passed tar
Thu May 4 09:20:34 PUP 2006 Found file passed sed
Thu May 4 09:20:34 PUP 2006 Found file passed gzip
Thu May 4 09:20:37 PUP 2006 Passed all file checks
Thu May 4 09:20:37 PUP 2006 Checking USB
Thu May 4 09:20:41 PUP 2006 USB Host driver passed
Thu May 4 09:20:41 PUP 2006 USB driver passed MOD_HCD=0 DEV_USB=0
Thu May 4 09:20:41 PUP 2006 Checking video driver
Thu May 4 09:20:41 PUP 2006 Videodev not loaded. Modules were: iptable_mangle iptable_nat ipt_REJECT ip_conntrack_ftp ip_conntrack_irc iptable_filter ipt_state ip_conntrack ip_tables snd-mixer-oss snd-via82xx snd-ac97-codec snd-pcm snd-timer gameport snd-mpu401-uart snd-rawmidi snd-seq-device snd soundcore snd-page-alloc parport_pc parport ide-cd sr_mod cdrom unionfs nls_iso8859-1 sd_mod usb-uhci ehci-hcd usbcore via-rhine mii crc32 scsi_mod
Thu May 4 09:20:54 PUP 2006 Loaded videodev with results: Linux video capture interface: v1.00
Thu May 4 09:21:10 PUP 2006 Simple USB bus search for camera ok
Thu May 4 09:21:10 PUP 2006 Webcam found D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=0840 Rev= 1.00
S: Product=Camera vendor=046d prodid=0840 manufacturer=
Thu May 4 09:21:17 PUP 2006 Trying to go online
Thu May 4 09:21:17 PUP 2006 searching for the right driver http://www.mindsitech.com/cgi-bin/wizwe ... rodID=0840
Thu May 4 09:21:17 PUP 2006 Found driver. Entries=192 Descr=Logitech QuickCam Driver=qcam Link=http://www.moyo.me.uk/pupplinux/puppy-qc-usb.tar.gz Time=Wed May 3 10:22:12 2006 file=puppy-qc-usb.tar.gz
Thu May 4 09:21:27 PUP 2006 Downloading driver package
Thu May 4 09:21:29 PUP 2006 Package /root/my-applications/bin/wiz/puppy-qc-usb.tar.gz downloaded
Thu May 4 09:21:35 PUP 2006 Found 4 in the package
Thu May 4 09:21:37 PUP 2006 DEPMOD was completed
Thu May 4 09:21:37 PUP 2006 Unloading modules if required
Thu May 4 09:21:38 PUP 2006 Loading new modules
Thu May 4 09:21:38 PUP 2006 Loaded qcam with results: usb.c: registered new driver quickcam
quickcam: QuickCam USB camera found (driver version QuickCam USB $Date: 2004/07/29 18:12:39 $)
quickcam: Kernel:2.4.29 bus:2 class:FF subclass:FF vendor:046D product:0840
quickcam [38.109298]: poisoning qc in qc_usb_init
quickcam: Probing HDCS-1000/1100: expecting 08, got 40
quickcam: Probing HDCS-1020: expecting 10, got 40
quickcam: Probing PB-0100/0101: expecting 64, got 00
quickcam: Probing VV6410: expecting 19, got 40
quickcam: Probing VV6450: expecting F0, got 40
quickcam: unsupported sensor
quickcam: QuickCam USB camera found (driver version QuickCam USB $Date: 2004/07/29 18:12:39 $)
quickcam: Kernel:2.4.29 bus:2 class:FF subclass:FF vendor:046D product:0840
quickcam [38.120518]: poisoning qc in qc_usb_init
quickcam: Probing HDCS-1000/1100: expecting 08, got 40
quickcam: Probing HDCS-1020: expecting 10, got 40
quickcam: Probing PB-0100/0101: expecting 64, got 00
quickcam: Probing VV6410: expecting 19, got 40
quickcam: Probing VV6450: expecting F0, got 40
quickcam: unsupported sensor
Thu May 4 09:22:06 PUP 2006 Video major device=81 minor device=0
Thu May 4 09:22:06 PUP 2006 Final application testing
Thu May 4 09:22:11 PUP 2006 File required not found - xawtv
Thu May 4 09:22:19 PUP 2006 User request download /root/my-applications/bin/wiz/ http://www.moyo.me.uk/pupplinux/xawtv-3.95.pup
Thu May 4 09:22:24 PUP 2006 xawtv-3.95.pup was downloaded
====
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D
Top
User avatar
NickBiker
Posts: 155
Joined: Wed 01 Mar 2006, 13:06
Location: Guildford, UK
Contact:
Contact NickBiker

#20 Post by NickBiker »

Lobster wrote::cry:
One step closer . . .

Tried again this is the output of my camwiz.txt
Could the 3D driver I installed be interfering?
====
Hi

I have updated the Wizard to do a bit more analysis of the debug output from the driver. You might like to re-download and run?

Sadly, I think that the SENSOR inside your webcam is not supported by this driver. Although the camera identifies as the correct type, they are made with a range of different sensors. The drivers, written by volunteers, decode some, but not all, of these devices. The problem has been that manufacturers claim that the information is "secret" and will not release teh tech. specs, making it a tough job to write the Linux code to support them. I suspect that Microsoft has no such problem...

Anyway, keep going!!

p.s. no the 3d driver will not be affecting the results.
Nick

See my Puppy webcam Guide at:
www.moyo.me.uk/pupplinux
Top
User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:
Contact Lobster

#21 Post by Lobster »

The wizard is getting easier :)
- still no success - i think you may be right about the settings . . .
Here is my latest testlog txt file

Code: Select all

Mon May  8 17:07:32 PUP 2006 Welcome to NickBikers WebCam Wizard - version 1.01  8 May 2006
Mon May  8 17:07:46 PUP 2006 Quiet mode is set as 0
Mon May  8 17:07:46 PUP 2006 /proc/version PASSED
Mon May  8 17:07:46 PUP 2006 OSNAME Linux
Mon May  8 17:07:46 PUP 2006 VERSION 2.4.29
Mon May  8 17:07:46 PUP 2006 Root check passed
Mon May  8 17:07:46 PUP 2006 Write check passed for .
Mon May  8 17:07:46 PUP 2006 Write check passed for /root/my-documents
Mon May  8 17:07:46 PUP 2006 Write check passed for /usr/lib/modules/usb/media
Mon May  8 17:07:46 PUP 2006 Write check passed for /lib/modules/2.4.29/usb/media
Mon May  8 17:07:46 PUP 2006 Write check passed for /root/my-applications/bin/wiz/
Mon May  8 17:07:46 PUP 2006 Found file passed depmod
Mon May  8 17:07:46 PUP 2006 Found file passed modprobe
Mon May  8 17:07:46 PUP 2006 Found file passed rmmod
Mon May  8 17:07:46 PUP 2006 Found file passed mount
Mon May  8 17:07:46 PUP 2006 Found file passed whoami
Mon May  8 17:07:46 PUP 2006 Found file passed chmod
Mon May  8 17:07:46 PUP 2006 Found file passed mknod
Mon May  8 17:07:46 PUP 2006 Found file passed grep
Mon May  8 17:07:46 PUP 2006 Found file passed cat
Mon May  8 17:07:46 PUP 2006 Found file passed gawk
Mon May  8 17:07:46 PUP 2006 Found file passed wget
Mon May  8 17:07:46 PUP 2006 Found file passed tar
Mon May  8 17:07:46 PUP 2006 Found file passed sed
Mon May  8 17:07:46 PUP 2006 Found file passed gzip
Mon May  8 17:07:46 PUP 2006 Found file passed modinfo
Mon May  8 17:07:46 PUP 2006 Found file passed cp
Mon May  8 17:07:46 PUP 2006 Found file passed ln
Mon May  8 17:07:49 PUP 2006 Passed all file checks
Mon May  8 17:07:49 PUP 2006 Checking USB
Mon May  8 17:07:53 PUP 2006 USB Host driver passed
Mon May  8 17:07:53 PUP 2006 USB driver passed MOD_HCD=0 DEV_USB=0
Mon May  8 17:07:53 PUP 2006 Checking video driver
Mon May  8 17:07:53 PUP 2006 Videodev not loaded.  Modules were: iptable_mangle iptable_nat ipt_REJECT ip_conntrack_ftp ip_conntrack_irc iptable_filter ipt_state ip_conntrack ip_tables snd-mixer-oss snd-via82xx snd-ac97-codec snd-pcm snd-timer gameport snd-mpu401-uart snd-rawmidi snd-seq-device snd soundcore snd-page-alloc parport_pc parport sr_mod ide-cd cdrom unionfs sd_mod usb-uhci ehci-hcd usbcore via-rhine mii crc32 scsi_mod 
Mon May  8 17:07:58 PUP 2006 Video major device=81  minor device=0 - PASSED
Mon May  8 17:08:01 PUP 2006 Simple USB bus search for camera PASSED
Mon May  8 17:08:01 PUP 2006 Webcam found D:  Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs=  1
P:  Vendor=046d ProdID=0840 Rev= 1.00
S:  Product=Camera vendor=046d prodid=0840 manufacturer=
Mon May  8 17:08:05 PUP 2006 Trying to go online
Mon May  8 17:08:06 PUP 2006 searching for the right driver http://www.mindsitech.com/cgi-bin/wizwebcam.cgi?VendorID=046d&ProdID=0840
Mon May  8 17:08:06 PUP 2006 Found driver. Entries=192 Descr=Logitech QuickCam Driver=qcam Link=http://www.moyo.me.uk/pupplinux/puppy-qc-usb.tar.gz Time=Thu May 4 12:29:09 2006 file=puppy-qc-usb.tar.gz
Mon May  8 17:08:17 PUP 2006 Downloading driver package /root/my-applications/bin/wiz/ http://www.moyo.me.uk/pupplinux/puppy-qc-usb.tar.gz
Mon May  8 17:08:19 PUP 2006 Package /root/my-applications/bin/wiz/puppy-qc-usb.tar.gz downloaded
Mon May  8 17:08:28 PUP 2006 Found 3 in the package
Mon May  8 17:08:30 PUP 2006 DEPMOD was completed - PASSED
Mon May  8 17:08:30 PUP 2006 There were 3 unpacked from the tar
Mon May  8 17:08:30 PUP 2006 Looking for modules:
Mon May  8 17:08:30 PUP 2006 File is: qcam.o
Mon May  8 17:08:30 PUP 2006 Found file passed qcset
Mon May  8 17:08:30 PUP 2006 Set qcam debug mode
Mon May  8 17:08:31 PUP 2006 Analysis of qcam initialisation
Mon May  8 17:08:31 PUP 2006 FAIL: Quickcam Module not loaded
Mon May  8 17:08:31 PUP 2006 PASS:	The module found the USB camera
Mon May  8 17:08:31 PUP 2006 FAIL:	The module does NOT support the type of CCD Sensor in your camera
Mon May  8 17:08:31 PUP 2006 FAIL:	ONLY these sensors are supported: expecting
Mon May  8 17:08:31 PUP 2006 FAIL:	Your sensor ID reports as  - which will NOT work at this time
Mon May  8 17:08:31 PUP 2006 FAIL:	The module failed to register the webcam at /dev/video0 
Mon May  8 17:08:31 PUP 2006 INFO:	No button detected on the webcam
Mon May  8 17:08:31 PUP 2006 INFO:	"Logitech QuickCam USB driver"
Mon May  8 17:08:31 PUP 2006 INFO:	modinfo (Linux modutils) 2.4.25
Mon May  8 17:08:31 PUP 2006 usb.c: registered new driver quickcam
quickcam: QuickCam USB camera found (driver version QuickCam USB $Date: 2004/07/29 18:12:39 $)
quickcam: Kernel:2.4.29 bus:2 class:FF subclass:FF vendor:046D product:0840
quickcam [30.861478]: poisoning qc in qc_usb_init
quickcam: Probing HDCS-1000/1100: expecting 08, got 40
quickcam: Probing HDCS-1020: expecting 10, got 40
quickcam: Probing PB-0100/0101: expecting 64, got 00
quickcam: Probing VV6410: expecting 19, got 40
quickcam: Probing VV6450: expecting F0, got 40
quickcam: unsupported sensor
quickcam: QuickCam USB camera found (driver version QuickCam USB $Date: 2004/07/29 18:12:39 $)
quickcam: Kernel:2.4.29 bus:2 class:FF subclass:FF vendor:046D product:0840
quickcam [30.872801]: poisoning qc in qc_usb_init
quickcam: Probing HDCS-1000/1100: expecting 08, got 40
quickcam: Probing HDCS-1020: expecting 10, got 40
quickcam: Probing PB-0100/0101: expecting 64, got 00
quickcam: Probing VV6410: expecting 19, got 40
quickcam: Probing VV6450: expecting F0, got 40
quickcam: unsupported sensor
Mon May  8 17:09:07 PUP 2006 User Exit
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D
Top
User avatar
NickBiker
Posts: 155
Joined: Wed 01 Mar 2006, 13:06
Location: Guildford, UK
Contact:
Contact NickBiker

#22 Post by NickBiker »

Lobster wrote:The wizard is getting easier :)
- still no success -
Hi

Looks like the driver does not support the sensor in your webcam!

Can you remind me the ecact make/model again - I will see if I can find any other drivers!?
Nick

See my Puppy webcam Guide at:
www.moyo.me.uk/pupplinux
Top
User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:
Contact Lobster

#23 Post by Lobster »

:)

Logitech Quickcam Express (name on manual)
28AWG and 2C/24AWG SPACE SHUTTLE (on cable)
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D
Top
User avatar
NickBiker
Posts: 155
Joined: Wed 01 Mar 2006, 13:06
Location: Guildford, UK
Contact:
Contact NickBiker

#24 Post by NickBiker »

Lobster wrote::)

Logitech Quickcam Express (name on manual)
28AWG and 2C/24AWG SPACE SHUTTLE (on cable)
ok - there may be a couple of other drivers we can try. i will have to compile them up for you!

Stand-by!! :roll:
Nick

See my Puppy webcam Guide at:
www.moyo.me.uk/pupplinux
Top
User avatar
NickBiker
Posts: 155
Joined: Wed 01 Mar 2006, 13:06
Location: Guildford, UK
Contact:
Contact NickBiker

#25 Post by NickBiker »

Lobster wrote::)

Logitech Quickcam Express (name on manual)
28AWG and 2C/24AWG SPACE SHUTTLE (on cable)
Hi

Right I have now produced Wizard 1.02!

Give this a go. It now allows for more than one driver and will automatically download each and try them. Fingers crossed!!
Nick

See my Puppy webcam Guide at:
www.moyo.me.uk/pupplinux
Top
User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:
Contact Lobster

#26 Post by Lobster »

Sadly no
report below
thanks for persevering :)

m m m let me see if I can find another webcam - oh I tried that still looking . . .

Code: Select all

Thu May 11 16:17:52 PUP 2006 Welcome to NickBikers WebCam Wizard - version 1.02  11 May 2006
Thu May 11 16:17:54 PUP 2006 Quiet mode is set as 0
Thu May 11 16:17:54 PUP 2006 /proc/version PASSED
Thu May 11 16:17:54 PUP 2006 OSNAME Linux
Thu May 11 16:17:54 PUP 2006 VERSION 2.4.29
Thu May 11 16:17:54 PUP 2006 Root check passed
Thu May 11 16:17:54 PUP 2006 Write check passed for .
Thu May 11 16:17:54 PUP 2006 Write check passed for /root/my-documents
Thu May 11 16:17:54 PUP 2006 Write check passed for /usr/lib/modules/usb/media
Thu May 11 16:17:54 PUP 2006 Write check passed for /lib/modules/2.4.29/usb/media
Thu May 11 16:17:54 PUP 2006 Write check passed for /root/my-applications/bin/wiz/
Thu May 11 16:17:54 PUP 2006 Found file passed depmod
Thu May 11 16:17:54 PUP 2006 Found file passed modprobe
Thu May 11 16:17:54 PUP 2006 Found file passed rmmod
Thu May 11 16:17:54 PUP 2006 Found file passed mount
Thu May 11 16:17:54 PUP 2006 Found file passed whoami
Thu May 11 16:17:54 PUP 2006 Found file passed chmod
Thu May 11 16:17:54 PUP 2006 Found file passed mknod
Thu May 11 16:17:54 PUP 2006 Found file passed grep
Thu May 11 16:17:54 PUP 2006 Found file passed cat
Thu May 11 16:17:54 PUP 2006 Found file passed gawk
Thu May 11 16:17:54 PUP 2006 Found file passed wget
Thu May 11 16:17:54 PUP 2006 Found file passed tar
Thu May 11 16:17:54 PUP 2006 Found file passed sed
Thu May 11 16:17:54 PUP 2006 Found file passed gzip
Thu May 11 16:17:54 PUP 2006 Found file passed modinfo
Thu May 11 16:17:54 PUP 2006 Found file passed cp
Thu May 11 16:17:54 PUP 2006 Found file passed ln
Thu May 11 16:17:59 PUP 2006 Passed all file checks
Thu May 11 16:17:59 PUP 2006 Checking USB
Thu May 11 16:18:02 PUP 2006 USB Host driver passed
Thu May 11 16:18:02 PUP 2006 USB driver passed MOD_HCD=0 DEV_USB=0
Thu May 11 16:18:02 PUP 2006 Checking video driver
Thu May 11 16:18:02 PUP 2006 Video device already loaded
Thu May 11 16:18:07 PUP 2006 Removing 0 modules attached to Videodev
Thu May 11 16:18:07 PUP 2006 Video major device=81  minor device=0 - PASSED
Thu May 11 16:18:10 PUP 2006 Simple USB bus search for camera PASSED
Thu May 11 16:18:10 PUP 2006 Webcam found D:  Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs=  1
P:  Vendor=046d ProdID=0840 Rev= 1.00
S:  Product=Camera vendor=046d prodid=0840 manufacturer=
Thu May 11 16:18:14 PUP 2006 Trying to go online
Thu May 11 16:18:14 PUP 2006 Testing intenet connection to http://www.mindsitech.com
Thu May 11 16:18:14 PUP 2006 searching for the right driver http://www.mindsitech.com/cgi-bin/wizwebcam.cgi?VendorID=046d&ProdID=0840
Thu May 11 16:18:15 PUP 2006 Found driver(s). Entries=193 Time=Wed May 10 16:12:07 2006
Thu May 11 16:18:21 PUP 2006 Driver #1, FILE=puppy-qc-usb.tar.gz, LINK=http://www.moyo.me.uk/pupplinux/puppy-qc-usb.tar.gz
Thu May 11 16:18:24 PUP 2006 Downloading driver package /root/my-applications/bin/wiz/ http://www.moyo.me.uk/pupplinux/puppy-qc-usb.tar.gz
Thu May 11 16:18:26 PUP 2006 Package /root/my-applications/bin/wiz/puppy-qc-usb.tar.gz downloaded
Thu May 11 16:18:32 PUP 2006 Found 3 in the package
Thu May 11 16:18:35 PUP 2006 DEPMOD was completed - PASSED
Thu May 11 16:18:35 PUP 2006 There were 3 unpacked from the tar
Thu May 11 16:18:35 PUP 2006 File #1 is: qcam.o
Thu May 11 16:18:35 PUP 2006 qcam.o is a module
Thu May 11 16:18:35 PUP 2006 Found file passed qcset
Thu May 11 16:18:35 PUP 2006 Set qcam debug mode
Thu May 11 16:18:35 PUP 2006 Analysis of qcam initialisation
Thu May 11 16:18:35 PUP 2006 FAIL:	Quickcam Module not loaded
Thu May 11 16:18:35 PUP 2006 PASS:	The module found the USB camera
Thu May 11 16:18:35 PUP 2006 FAIL:	The module does NOT support the type of CCD Sensor in your camera
Thu May 11 16:18:35 PUP 2006 FAIL:	ONLY these sensors are supported: expecting
Thu May 11 16:18:35 PUP 2006 FAIL:	Your sensor ID reports as  - which will NOT work at this time
Thu May 11 16:18:35 PUP 2006 FAIL:	The module failed to register the webcam at /dev/video0 
Thu May 11 16:18:35 PUP 2006 INFO:	No button detected on the webcam
Thu May 11 16:18:35 PUP 2006 INFO:	"Logitech QuickCam USB driver"
Thu May 11 16:18:35 PUP 2006 INFO:	modinfo (Linux modutils) 2.4.25
Thu May 11 16:18:35 PUP 2006 usb.c: registered new driver quickcam
quickcam: QuickCam USB camera found (driver version QuickCam USB $Date: 2004/07/29 18:12:39 $)
quickcam: Kernel:2.4.29 bus:2 class:FF subclass:FF vendor:046D product:0840
quickcam [35.163562]: poisoning qc in qc_usb_init
quickcam: Probing HDCS-1000/1100: expecting 08, got 40
quickcam: Probing HDCS-1020: expecting 10, got 40
quickcam: Probing PB-0100/0101: expecting 64, got 00
quickcam: Probing VV6410: expecting 19, got 40
quickcam: Probing VV6450: expecting F0, got 40
quickcam: unsupported sensor
quickcam: QuickCam USB camera found (driver version QuickCam USB $Date: 2004/07/29 18:12:39 $)
quickcam: Kernel:2.4.29 bus:2 class:FF subclass:FF vendor:046D product:0840
quickcam [35.175085]: poisoning qc in qc_usb_init
quickcam: Probing HDCS-1000/1100: expecting 08, got 40
quickcam: Probing HDCS-1020: expecting 10, got 40
quickcam: Probing PB-0100/0101: expecting 64, got 00
quickcam: Probing VV6410: expecting 19, got 40
quickcam: Probing VV6450: expecting F0, got 40
quickcam: unsupported sensor
Thu May 11 16:18:44 PUP 2006 Removing 1 modules attached to Videodev
Thu May 11 16:18:44 PUP 2006 Removed module: qcam
Thu May 11 16:18:44 PUP 2006 Unloaded the following: qcam
Thu May 11 16:18:46 PUP 2006 Driver #2, FILE=puppy-qce-ga-040d.tar.gz, LINK=http://www.moyo.me.uk/pupplinux/puppy-qce-ga-040d.tar.gz
Thu May 11 16:18:49 PUP 2006 Downloading driver package /root/my-applications/bin/wiz/ http://www.moyo.me.uk/pupplinux/puppy-qce-ga-040d.tar.gz
Thu May 11 16:18:49 PUP 2006 Package /root/my-applications/bin/wiz/puppy-qce-ga-040d.tar.gz downloaded
Thu May 11 16:18:52 PUP 2006 Found 1 in the package
Thu May 11 16:18:55 PUP 2006 DEPMOD was completed - PASSED
Thu May 11 16:18:55 PUP 2006 There were 1 unpacked from the tar
Thu May 11 16:18:55 PUP 2006 File #1 is: mod_quickcam.o
Thu May 11 16:18:55 PUP 2006 mod_quickcam.o is a module
Thu May 11 16:18:55 PUP 2006 Set mod_quickcam debug mode
Thu May 11 16:18:55 PUP 2006 Analysis of mod_quickcam initialisation
Thu May 11 16:18:55 PUP 2006 FAIL:	Quickcam Express Module not loaded
Thu May 11 16:18:55 PUP 2006 FAIL:	The module failed to find the USB camera
Thu May 11 16:18:55 PUP 2006 FAIL:	The module does NOT support the type of CCD Sensor in your camera
Thu May 11 16:18:55 PUP 2006 FAIL:	The module failed to register the webcam at /dev/video0 
Thu May 11 16:18:55 PUP 2006 INFO:	No button detected on the webcam
Thu May 11 16:18:55 PUP 2006 INFO:	
Thu May 11 16:18:55 PUP 2006 INFO:	modinfo (Linux modutils) 2.4.25
Thu May 11 16:18:55 PUP 2006 
Thu May 11 16:18:58 PUP 2006 Unable to get any driver working - had to give up
Thu May 11 16:19:01 PUP 2006 User Exit
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D
Top
User avatar
NickBiker
Posts: 155
Joined: Wed 01 Mar 2006, 13:06
Location: Guildford, UK
Contact:
Contact NickBiker

#27 Post by NickBiker »

Lobster wrote:Sadly no
report below
thanks for persevering :)

m m m let me see if I can find another webcam - oh I tried that still looking
Hi Lobster!!

Sorry about that - don't give up!! We'll get there - the fish are on your side!!

Try version 1.04 of my Wizard. I think the last try highlighted some problems in the wizard - I feel more confident that this version will work and the alternative driver really should give you some results. Fingers crossed (or claws!) :shock:
Nick

See my Puppy webcam Guide at:
www.moyo.me.uk/pupplinux
Top
User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:
Contact Lobster

#28 Post by Lobster »

Good to hear about the fish :)
Here is the latest output
I also found my other 'webcam'
It is not really a webcam but a tiny digital camera
that can be used as a webcam - a Umax 320S
Do you want me to run that through the wizard too?

Hey we need more testers.
All you do is download the latest wizard from Nickbikers website (see first post in this thread)
then you plug in your webcam and click on the downloaded file
and just follow the instruction (a few mouse clicks)
A text file is created in "my documents" which you can send or post here.

Are you sure those fish are on my side?
They might end up - Eaten! :)

Code: Select all

1 Welcome to NickBikers WebCam Wizard                                                 Version 1.04  13 May 2006
2 Quiet mode is set as                                                                0
3 /proc/version                                                                       PASSED
4 OSNAME Linux                                                                        PASSED
5 VERSION 2.4.29                                                                      PASSED
6 Root check                                                                          PASSED
7 Write check .                                                                       PASSED
8 Write check /root/my-documents                                                      PASSED
9 Write check /usr/lib/modules/usb/media                                              PASSED
10 Write check /lib/modules/2.4.29/usb/media                                          PASSED
11 Write check /root/my-applications/bin/wiz/                                         PASSED
12 Found file depmod                                                                  PASSED
13 Found file modprobe                                                                PASSED
14 Found file rmmod                                                                   PASSED
15 Found file mount                                                                   PASSED
16 Found file whoami                                                                  PASSED
17 Found file chmod                                                                   PASSED
18 Found file mknod                                                                   PASSED
19 Found file grep                                                                    PASSED
20 Found file cat                                                                     PASSED
21 Found file gawk                                                                    PASSED
22 Found file wget                                                                    PASSED
23 Found file tar                                                                     PASSED
24 Found file sed                                                                     PASSED
25 Found file gzip                                                                    PASSED
26 Found file modinfo                                                                 PASSED
27 Found file cp                                                                      PASSED
28 Found file ln                                                                      PASSED
29 All file checks                                                                    PASSED
30 USB Host driver                                                                    PASSED
31 USB driver MOD_HCD=0 DEV_USB=0                                                     PASSED
32 Video device                                                                       ALREADY LOADED
33 Removing modules attached to Videodev                                              1
34 Removed module                                                                     mod_quickcam
35 Unloaded the following                                                             mod_quickcam
36 Video major device=81 minor device=0                                               PASSED
37 Simple USB bus search for camera                                                   PASSED
38    Webcam found D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1 P: 
   Vendor=046d ProdID=0840 Rev= 1.00 S: Product=Camera vendor=046d prodid=0840 
   manufacturer=
39 Trying to go online                                                                
40 Testing intenet connection to http://www.mindsitech.com                            
41    searching for driver http://www.mindsitech.com/cgi-bin/wizwebcam.
   cgi?VendorID=046d&ProdID=0840
42 Found driver(s). Entries=193 Time=Wed May 10 16:12:07 2006                         PASSED
43    Driver #1, FILE=puppy-qc-usb.tar.gz, LINK=http://www.moyo.me.uk/pupplinux/
   puppy-qc-usb.tar.gz
44    Downloading driver package /root/my-applications/bin/wiz/ http://www.moyo.me.uk/
   pupplinux/puppy-qc-usb.tar.gz
45 Package /root/my-applications/bin/wiz/puppy-qc-usb.tar.gz downloaded               PASSED
46 Found in the package                                                               3
47 Removed duplicate /usr/lib/modules/usb/media/qcam.o                                (#1)
48 DEPMOD was completed                                                               PASSED
49 Unpacked files from the tar                                                        3
50 File #1 is                                                                         qcam.o
51 Module File check: /usr/lib/modules/usb/media/qcam.o                               PASSED
52 File copy: /lib/modules/2.4.29/usb/media/qcam.o                                    PASSED
53 qcam.o is a module                                                                 
54 Doing /sbin/modprobe qcam                                                          
55 Found file qcset                                                                   PASSED
56 Set debug mode                                                                     qcam
57 Analysis of initialisation                                                         qcam
58 PASS: Quickcam Module loaded                                                       
59 PASS: The module found the USB camera                                              
60 FAIL: The module does NOT support the type of CCD Sensor in your camera            
61 FAIL: The module failed to register the webcam at /dev/video0                      
62 INFO: No button detected on the webcam                                             
63 "Logitech QuickCam USB driver"                                                     
64    Mod Params: qcdebug int, description "Sets the debug output (bitfield)" 
   keepsettings int, description "Keep picture settings across one open to another 
   (0-1)" settle int, description "Maximum number of frames to wait picture 
   brightness to settle (0-255)" subsample int, description "Sets subsampling 
   (0-1)" compress int, description "Enable compressed mode (0-1)" frameskip int, 
   description "How frequently capture frames (0-10)" quality int, description 
   "Sets the picture quality (0-5)" adaptive int, description "Automatic adaptive 
   brightness control (0-1)" equalize int, description "Equalize image (0-1)" 
   userlut int, description "Apply user-specified lookup-table (0-1)" retryerrors 
   int, description "Retry if image capture fails, otherwise return error code 
   (0-1)" compatible int, description "Enable workaround for bugs in application 
   programs (bitfield)" video_nr int, description "Set videodevice number (/dev/
   videoX)"
65    DEBUG=usb.c: registered new driver quickcam quickcam: QuickCam USB camera found 
   (driver version QuickCam USB $Date: 2004/07/29 18:12:39 $) quickcam: Kernel:2.4.
   29 bus:2 class:FF subclass:FF vendor:046D product:0840 quickcam [ 3.402280]: 
   poisoning qc in qc_usb_init quickcam: Probing HDCS-1000/1100: expecting 08, got 
   40 quickcam: Probing HDCS-1020: expecting 10, got 40 quickcam: Probing PB-0100/
   0101: expecting 64, got 00 quickcam: Probing VV6410: expecting 19, got 40 
   quickcam: Probing VV6450: expecting F0, got 40 quickcam: unsupported sensor 
   quickcam: QuickCam USB camera found (driver version QuickCam USB $Date: 2004/07/
   29 18:12:39 $) quickcam: Kernel:2.4.29 bus:2 class:FF subclass:FF vendor:046D 
   product:0840 quickcam [ 3.414099]: poisoning qc in qc_usb_init quickcam: 
   Probing HDCS-1000/1100: expecting 08, got 40 quickcam: Probing HDCS-1020: 
   expecting 10, got 40 quickcam: Probing PB-0100/0101: expecting 64, got 00 
   quickcam: Probing VV6410: expecting 19, got 40 quickcam: Probing VV6450: 
   expecting F0, got 40 quickcam: unsupported sensor
66 Removing modules attached to Videodev                                              1
67 Removed module                                                                     qcam
68 Unloaded the following                                                             qcam
69    Driver #2, FILE=puppy-qce-ga-040d.tar.gz, LINK=http://www.moyo.me.uk/pupplinux/
   puppy-qce-ga-040d.tar.gz
70    Downloading driver package /root/my-applications/bin/wiz/ http://www.moyo.me.uk/
   pupplinux/puppy-qce-ga-040d.tar.gz
71 Package /root/my-applications/bin/wiz/puppy-qce-ga-040d.tar.gz downloaded          PASSED
72 Found in the package                                                               1
73 Removed duplicate /usr/lib/modules/usb/media/mod_quickcam.o                        (#1)
74 DEPMOD was completed                                                               PASSED
75 Unpacked files from the tar                                                        1
76 File #1 is                                                                         mod_quickcam.o
77 Module File check: /usr/lib/modules/usb/media/mod_quickcam.o                       PASSED
78 File copy: /lib/modules/2.4.29/usb/media/mod_quickcam.o                            PASSED
79 mod_quickcam.o is a module                                                         
80 Doing /sbin/modprobe mod_quickcam debug=4                                          
81 Set debug mode                                                                     mod_quickcam
82 Analysis of initialisation                                                         mod_quickcam
83 PASS: Quickcam Express Module loaded                                               
84 PASS: The module found the USB camera                                              
85 PASS: The module found a supported sensor: sensor                                  
86 FAIL: The module failed to register the webcam at /dev/video0                      
87 INFO: No button detected on the webcam                                             
88 "Puppy Logitech Quickcam Express (0x840) Webcam driver"                            
89    Mod Params: debug int, description "Sets the debug output (1,2,4,8,16,32)" 
   interpolation int, description "Sets the interpolation mode (0-1)" mode int, 
   description "Sets the speed (0-1)" keepexposure int, description "Keep gain 
   settings across one open to another (0-1)" tobgr int, description "Automatic 
   RGB -> BGR conversion" rgain int, description "Initial value of red gain 
   (0-255)" bgain int, description "Initial value of blue gain (0-255)" ggain int, 
   description "Initial value of green gains (0-255)" bright int, description 
   "Initial value for brightness (0-65535)" video_nr int, description "Set 
   videodevice number (/dev/videoX)"
90    DEBUG=usb.c: registered new driver mod_quickcam USB Quickcam Class ff SubClass 
   ff idVendor 46d idProduct 840 USB Quickcam camera found using: $Id: 
   mod_quickcam.c,v 1.112 12-May-2006 tuukkat Exp $ quickcam: probe of HDCS1000 
   sensor = 08 c0 id: 08 quickcam: HDCS1000 sensor 
   detected
91 Unable to get any driver working - had to give up                                  FAILED
92 User Exit                                                                          BYEEE!
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D
Top
User avatar
NickBiker
Posts: 155
Joined: Wed 01 Mar 2006, 13:06
Location: Guildford, UK
Contact:
Contact NickBiker

#29 Post by NickBiker »

Lobster wrote:Good to hear about the fish :)
Here is the latest output
I also found my other 'webcam'
It is not really a webcam but a tiny digital camera
that can be used as a webcam - a Umax 320S
Do you want me to run that through the wizard too?
Yes - give it a go my Homarus gammarus friend!
Lobster wrote:Hey we need more testers.
I have had a few people email to say they have got their cams to work using the Wizard - good news!

Lobster - I think it is now working it was just the wizard that got the analysis wrong! Try the lastest again (1.05) - nearly there!! Difficult when I don't have the cam this end - but I feel the tide is with us!!
Nick

See my Puppy webcam Guide at:
www.moyo.me.uk/pupplinux
Top
User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:
Contact Lobster

#30 Post by Lobster »

:oops:
File integrity ERROR: camwizard-1.05.pup

Suggestion: Download the Pup file again
tried 3 downloads - got the same above message
The fish did it!
The other cam did not work - will try it again with 1.05 when I can download :)
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D
Top
User avatar
NickBiker
Posts: 155
Joined: Wed 01 Mar 2006, 13:06
Location: Guildford, UK
Contact:
Contact NickBiker

#31 Post by NickBiker »

Lobster wrote::oops:

File integrity ERROR: camwizard-1.05.pup
Oh for goodness!! :evil: All I do is ftp the package to the web site and now this!! I have copied it again and checked and all working. You have to wonder somedays - doesn't the ftp ensure integrity of the file?

It should be ok now!

As for the other cam, a quick check reveals that you have choosen another cam that is "difficult" undex Linux. The Wizard won't find it - but at least you can let me have the output and I can start my jouney on that one too...

:wink:
Nick

See my Puppy webcam Guide at:
www.moyo.me.uk/pupplinux
Top
User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:
Contact Lobster

MTpaint and a portal to another dimension

#32 Post by Lobster »

Image

Success!

The picture is of MTpaint and a portal to another dimension
I am holding the camera so it is a bit blurred . . .
- will try other cam later

You the man!
1 Welcome to NickBikers WebCam Wizard Version 1.05 15 May 2006
2 Quiet mode is set as 0
3 /proc/version PASSED
4 OSNAME Linux PASSED
5 VERSION 2.4.29 PASSED
6 Root check PASSED
7 Write check . PASSED
8 Write check /root/my-documents PASSED
9 Write check /usr/lib/modules/usb/media PASSED
10 Write check /lib/modules/2.4.29/usb/media PASSED
11 Write check /root/my-applications/bin/wiz/ PASSED
12 Found file depmod PASSED
13 Found file modprobe PASSED
14 Found file rmmod PASSED
15 Found file mount PASSED
16 Found file whoami PASSED
17 Found file chmod PASSED
18 Found file mknod PASSED
19 Found file grep PASSED
20 Found file cat PASSED
21 Found file gawk PASSED
22 Found file wget PASSED
23 Found file tar PASSED
24 Found file sed PASSED
25 Found file gzip PASSED
26 Found file modinfo PASSED
27 Found file cp PASSED
28 Found file ln PASSED
29 All file checks PASSED
30 USB Host driver PASSED
31 USB driver MOD_HCD=0 DEV_USB=0 PASSED
32 Videodev not loaded. FAILED
33 Doing /sbin/modprobe videodev
34 Video major device=81 minor device=0 PASSED
35 Simple USB bus search for camera PASSED
36 Webcam found D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1 P:
Vendor=046d ProdID=0840 Rev= 1.00 S: Product=Camera vendor=046d prodid=0840
manufacturer=
37 Trying to go online
38 Testing intenet connection to http://www.mindsitech.com
39 searching for driver http://www.mindsitech.com/cgi-bin/wizwebcam.
cgi?VendorID=046d&ProdID=0840
40 Found driver(s). Entries=193 Time=Mon May 15 12:58:59 2006 PASSED
41 Driver #1, FILE=puppy-qc-usb.tar.gz, LINK=http://www.moyo.me.uk/pupplinux/
puppy-qc-usb.tar.gz
42 Downloading driver package /root/my-applications/bin/wiz/ http://www.moyo.me.uk/
pupplinux/puppy-qc-usb.tar.gz
43 Package /root/my-applications/bin/wiz/puppy-qc-usb.tar.gz downloaded PASSED
44 Found in the package 3
45 Removed duplicate /usr/lib/modules/usb/media/qcam.o (#1)
46 DEPMOD was completed PASSED
47 Unpacked files from the tar 3
48 File #1 is qcam.o
49 Module File check: /usr/lib/modules/usb/media/qcam.o PASSED
50 File copy: /lib/modules/2.4.29/usb/media/qcam.o PASSED
51 qcam.o is a module
52 Doing /sbin/modprobe qcam
53 Found file qcset PASSED
54 Set debug mode qcam
55 Quickcam Module loaded PASS
56 The module found the USB camera PASS
57 CCD Sensor NOT supported FAIL
58 No button detected on the webcam INFO
59 Failed to register the webcam at /dev/video0 FAIL
60 "Logitech QuickCam USB driver" INFO
61 qcdebug int, description "Sets the debug output (bitfield)" keepsettings int,
description "Keep picture settings across one open to another (0-1)" settle int,
description "Maximum number of frames to wait picture brightness to settle
(0-255)" subsample int, description "Sets subsampling (0-1)" compress int,
description "Enable compressed mode (0-1)" frameskip int, description "How
frequently capture frames (0-10)" quality int, description "Sets the picture
quality (0-5)" adaptive int, description "Automatic adaptive brightness control
(0-1)" equalize int, description "Equalize image (0-1)" userlut int,
description "Apply user-specified lookup-table (0-1)" retryerrors int,
description "Retry if image capture fails, otherwise return error code (0-1)"
compatible int, description "Enable workaround for bugs in application programs
(bitfield)" video_nr int, description "Set videodevice number (/dev/
videoX)"
62 DEBUG=usb.c: registered new driver quickcam quickcam: QuickCam USB camera found
(driver version QuickCam USB $Date: 2004/07/29 18:12:39 $) quickcam: Kernel:2.4.
29 bus:2 class:FF subclass:FF vendor:046D product:0840 quickcam [33.148665]:
poisoning qc in qc_usb_init quickcam: Probing HDCS-1000/1100: expecting 08, got
40 quickcam: Probing HDCS-1020: expecting 10, got 40 quickcam: Probing PB-0100/
0101: expecting 64, got 00 quickcam: Probing VV6410: expecting 19, got 40
quickcam: Probing VV6450: expecting F0, got 40 quickcam: unsupported sensor
quickcam: QuickCam USB camera found (driver version QuickCam USB $Date: 2004/07/
29 18:12:39 $) quickcam: Kernel:2.4.29 bus:2 class:FF subclass:FF vendor:046D
product:0840 quickcam [33.159748]: poisoning qc in qc_usb_init quickcam:
Probing HDCS-1000/1100: expecting 08, got 40 quickcam: Probing HDCS-1020:
expecting 10, got 40 quickcam: Probing PB-0100/0101: expecting 64, got 00
quickcam: Probing VV6410: expecting 19, got 40 quickcam: Probing VV6450:
expecting F0, got 40 quickcam: unsupported sensor
63 Removing modules attached to Videodev 1
64 Removed module qcam
65 Unloaded the following qcam
66 Driver #2, FILE=puppy-qce-ga-040d.tar.gz, LINK=http://www.moyo.me.uk/pupplinux/
puppy-qce-ga-040d.tar.gz
67 Downloading driver package /root/my-applications/bin/wiz/ http://www.moyo.me.uk/
pupplinux/puppy-qce-ga-040d.tar.gz
68 Package /root/my-applications/bin/wiz/puppy-qce-ga-040d.tar.gz downloaded PASSED
69 Found in the package 1
70 Removed duplicate /usr/lib/modules/usb/media/mod_quickcam.o (#1)
71 DEPMOD was completed PASSED
72 Unpacked files from the tar 1
73 File #1 is mod_quickcam.o
74 Module File check: /usr/lib/modules/usb/media/mod_quickcam.o PASSED
75 File copy: /lib/modules/2.4.29/usb/media/mod_quickcam.o PASSED
76 mod_quickcam.o is a module
77 Doing /sbin/modprobe mod_quickcam debug=4
78 Set debug mode mod_quickcam
79 Quickcam Express Module loaded PASS
80 The module found the USB camera PASS
81 The module found a supported sensor: HDCS1000 PASS
82 No button detected on the webcam INFO
83 Failed to register the webcam at /dev/video0 FAIL
84 "Puppy Logitech Quickcam Express (0x840) Webcam driver" INFO
85 debug int, description "Sets the debug output (1,2,4,8,16,32)" interpolation
int, description "Sets the interpolation mode (0-1)" mode int, description
"Sets the speed (0-1)" keepexposure int, description "Keep gain settings across
one open to another (0-1)" tobgr int, description "Automatic RGB -> BGR
conversion" rgain int, description "Initial value of red gain (0-255)" bgain
int, description "Initial value of blue gain (0-255)" ggain int, description
"Initial value of green gains (0-255)" bright int, description "Initial value
for brightness (0-65535)" video_nr int, description "Set videodevice number (/
dev/videoX)"
86 DEBUG=usb.c: registered new driver mod_quickcam USB Quickcam Class ff SubClass
ff idVendor 46d idProduct 840 USB Quickcam camera found using: $Id:
mod_quickcam.c,v 1.112 12-May-2006 tuukkat Exp $ quickcam: probe of HDCS1000
sensor = 08 cf id: 08 quickcam: HDCS1000 sensor
detected
87 Unable to get any driver working - had to give up FAILED
88 Final application testing
89 File xawtv not found FAILED
90 User request download /root/my-applications/bin/wiz/ http://www.moyo.me.uk/
pupplinux/xawtv-3.95.pup
91 xawtv-3.95.pup PASSED
92 Package PASSED
93 hwscan results PASSED
94 This is xawtv-3.95, running on Linux/i686 (2.4.29) looking for available
devices Xvideo: 1 adaptors available. Xvideo: 3dfx Video Overlay: input image,
ports 61-61 port 61-61 type : Xvideo, image scaler name : 3dfx Video Overlay
vid-open: trying: v4l2-old... vid-open: failed: v4l2-old vid-open: trying: v4l2.
.. ioctl: VIDIOC_QUERYCAP(driver="";card="";bus_info="";version=0.0.
0;capabilities=0x0 []): Invalid argument vid-open: failed: v4l2 vid-open:
trying: v4l... v4l: open: /dev/video0 (Logitech USB Camera) capabilities:
capture size : 176x144 => 352x288 channels: 1 ioctl:
VIDIOCGCHAN(channel=0;name="Camera";tuners=0;flags=0x0 [];type=CAMERA;norm=0):
ok Camera: 0 camera audios : 0 ioctl:
VIDIOCSCHAN(channel=0;name="Camera";tuners=0;flags=0x0 [];type=CAMERA;norm=0):
ok PALioctl: VIDIOCSCHAN(channel=0;name="Camera";tuners=0;flags=0x0
[];type=CAMERA;norm=1): ok NTSCioctl:
VIDIOCSCHAN(channel=0;name="Camera";tuners=0;flags=0x0 [];type=CAMERA;norm=2):
ok SECAMioctl: VIDIOCSCHAN(channel=0;name="Camera";tuners=0;flags=0x0
[];type=CAMERA;norm=3): ok AUTOioctl:
VIDIOCSCHAN(channel=0;name="Camera";tuners=0;flags=0x0 [];type=CAMERA;norm=0):
ok ioctl: VIDIOCGFBUF(base=(nil);height=0;width=0;depth=0;bytesperline=0): ok
fbuffer : base=0x(nil) size=0x0 depth=0 bpl=0 ioctl:
VIDIOCGPICT(brightness=32768;hue=32640;colour=32768;contrast=32768;whiteness=0;d
epth=24;palette=RGB24): ok picture : brightness=32768 hue=32640 colour=32768
contrast=32768 picture : whiteness=0 depth=24 palette=rgb24 ioctl:
VIDIOCGMBUF(size=811008;frames=2;offsets=0): ok mbuf: size=811008 frames=2 v4l:
using mapped buffers for capture vid-open: ok: v4l /dev/video0: OK [ -device /
dev/video0 ] type : v4l name : Logitech USB Camera flags: capture v4l:
close
95 Run live webcam view check
96 Installing script in /etc/rc.d/rc.local
97 User Exit BYEEE!
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D
Top
User avatar
NickBiker
Posts: 155
Joined: Wed 01 Mar 2006, 13:06
Location: Guildford, UK
Contact:
Contact NickBiker

Re: MTpaint and a portal to another dimension

#33 Post by NickBiker »

Lobster wrote:Image

Success!
Hoorah!!

I will make a page on the website so we can record all those Puppy's who have got their webcams to work!! Well done :P

The other camera looks a "challenge"! :shock:

Have fun!
Nick

See my Puppy webcam Guide at:
www.moyo.me.uk/pupplinux
Top
User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:
Contact Lobster

#34 Post by Lobster »

:)
the other webcam/camera is a Umax AstraPix 320S
and it does not seem to be registering as plugged in even.
We got this camera working with digicam (it could not be acessed from MUT)

Code: Select all

1 Welcome to NickBikers WebCam Wizard                                                 Version 1.05  15 May 2006
2 Quiet mode is set as                                                                0
3 /proc/version                                                                       PASSED
4 OSNAME Linux                                                                        PASSED
5 VERSION 2.4.29                                                                      PASSED
6 Root check                                                                          PASSED
7 Write check .                                                                       PASSED
8 Write check /root/my-documents                                                      PASSED
9 Write check /usr/lib/modules/usb/media                                              PASSED
10 Write check /lib/modules/2.4.29/usb/media                                          PASSED
11 Write check /root/my-applications/bin/wiz/                                         PASSED
12 Found file depmod                                                                  PASSED
13 Found file modprobe                                                                PASSED
14 Found file rmmod                                                                   PASSED
15 Found file mount                                                                   PASSED
16 Found file whoami                                                                  PASSED
17 Found file chmod                                                                   PASSED
18 Found file mknod                                                                   PASSED
19 Found file grep                                                                    PASSED
20 Found file cat                                                                     PASSED
21 Found file gawk                                                                    PASSED
22 Found file wget                                                                    PASSED
23 Found file tar                                                                     PASSED
24 Found file sed                                                                     PASSED
25 Found file gzip                                                                    PASSED
26 Found file modinfo                                                                 PASSED
27 Found file cp                                                                      PASSED
28 Found file ln                                                                      PASSED
29 All file checks                                                                    PASSED
30 USB Host driver                                                                    PASSED
31 USB driver MOD_HCD=0 DEV_USB=0                                                     PASSED
32 Video device                                                                       ALREADY LOADED
33 Removing modules attached to Videodev                                              1
34 Removed module                                                                     (unused)
35 Unloaded the following                                                             (unused)
36 Video major device=81 minor device=0                                               PASSED
37 Simple USB bus search for camera                                                   FAILED
38 Compared USB images                                                                FAILED
39 No camera attached to the USB bus.                                                 FAILED
40 Simple USB bus search for camera                                                   FAILED
41 Compared USB images                                                                FAILED
42 No camera attached to the USB bus.                                                 FAILED
43 Simple USB bus search for camera                                                   FAILED
44 User Exit                                                                          BYEEE!
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D
Top
User avatar
NickBiker
Posts: 155
Joined: Wed 01 Mar 2006, 13:06
Location: Guildford, UK
Contact:
Contact NickBiker

#35 Post by NickBiker »

Lobster wrote::)
the other webcam/camera is a Umax AstraPix 320S
and it does not seem to be registering as plugged in even.
We got this camera working with digicam (it could not be acessed from MUT)
Hi

Try plugging it into USB and doing

cat /proc/bus/usb/devices

Sadly if the basic USB controller does not register the device as exisiting, then we can't move forward!

:idea: Have you tried it in different USB ports?
Nick

See my Puppy webcam Guide at:
www.moyo.me.uk/pupplinux
Top
Post Reply

Return to “HOWTO ( Solutions )”