Wow..1.5 days. Thanks very much for your persistence. Before murga went down Jemimah and I were discussing creating a repo for Saluki at smokey01.com. Jemimah is insistent on using Midori, but Seamonkey can definately go into the repository, along with Firefox (my default browser). Plus Midori is small, so it cuts down on the size of the iso. Also, Seamonkey was at version 2.4.1 the last time I checked (they update way tooo fast), but I could probably repackage your Seamonkey with your custom addons..unless you compiled it specifically for Saluki.ttuuxxx wrote:Hi Tman I rebuilt Barry's Seamonkey package that racy uses and added adblock, new theme, search engines, etc please use the browser package for your woof builds, it took 1.5 days to make it up.
http://www.smokey01.com/ttuuxxx/Racy/se ... .2-w52.pet
http://www.smokey01.com/ttuuxxx/Racy/se ... _entry.txt
ttuuxxx
Saluki
Sage,Sage wrote:Saluki5.2.2alpha.
Interesting. It works - good news. Roll your own browser - good, in principle. Chose FF, pile of ancillary libs missing, couldn't find some, couldn't remember others. Forced to pick SM ! Arrggh....
If you want a small Internet Apps downloader, I have attached it below:
You can get Flashplayer, Firefox, Seamonkey, Opera and Gnome-Office.
I tested them for SolidPup (Wary-5.1.1 based), so they will be fine in Saluki.
I will probably make it availiable in the 'additional pets' section, but want to improve it first.
Edit: I have made a new version of GetPackage that you can get -> here.
Last edited by Tman on Sun 04 Dec 2011, 19:22, edited 1 time in total.
I don't know what I am missing here, but here is what I have found so far.
Installation of Seamonkey 2 and above seems to be missing libjpg.so.8 and even after install, the browser icon does not seem to start it.
I can start it from a terminal with the same command shown in /usr/local/defaultbrowser.
Also, other applications that are missing but have a desktop icon are
write - no abiword
calc - no gnumeric
paint - no mtpaint
I know it is a work in progress, but a small working browser would be good also.
Also, a bit off subject, but the flashing icons above the message window on the forum are distracting as hell and some could blame them for seizures. So not a good addition in my humble opinion.
Additional, Tman and others, Seamonkey when installed is as I stated above. And that was Seamonkey 2.05.
Installation of Seamonkey 2 and above seems to be missing libjpg.so.8 and even after install, the browser icon does not seem to start it.
I can start it from a terminal with the same command shown in /usr/local/defaultbrowser.
Also, other applications that are missing but have a desktop icon are
write - no abiword
calc - no gnumeric
paint - no mtpaint
I know it is a work in progress, but a small working browser would be good also.
Also, a bit off subject, but the flashing icons above the message window on the forum are distracting as hell and some could blame them for seizures. So not a good addition in my humble opinion.
Additional, Tman and others, Seamonkey when installed is as I stated above. And that was Seamonkey 2.05.
Midori tested working ok in Slacko . Flash testing with video ok too.
If you run Slacko and want to install jemimah's midori you need to symlink libssl.so.0.9.8 to 1.0.0
If you run Slacko and want to install jemimah's midori you need to symlink libssl.so.0.9.8 to 1.0.0
Code: Select all
(cd /lib; ln -sf libssl.so.0.9.8 libssl.so.1.0.0)
Puppy Linux Blog - contact me for access
About the kernel. I remember reading one of Pemasu threads saying that Barry's 2.6.9.4 kernel was missing something in the compile, but can't remember exactly what that thing was...maybe it was bluetooth. I am not sure if we should stick with that kernel or go with another one atm. We should hold off compiling of drivers until this gets sorted out.
Last edited by Tman on Mon 28 Nov 2011, 21:37, edited 1 time in total.
If your going to use gstreamer, consider phonon, it's a good system and stable! might replace a few other things while at it.jemimah wrote:
I've got a nearly working static Midori - still need to get ssl working, and figure out which version of webkitgtk is the most stable.
If you want, I can build it with html5 video support, which uses gstreamer. Then we'd pull out all of the multimedia applications and replace with gstreamer-based ones. I think that should save a good amount of size.
The Phonon multimedia library and its backend plugins being:
Phonon DirectShow
Phonon GStreamer
Phonon MMF
Phonon MPlayer
Phonon QuickTime
Phonon VLC
Phonon WaveOut
Phonon Xine
Oh yes, and the url is http://phonon.kde.org/.
regards
scsijon
ps Tman ff8 causes problems with Thunderbird/Eudora If directly installed, not via an ff7>ff8 upgrade.
Barry`s 2.6.39.4 kernel (.config) misses bluetooth modules. I compiled them as modules backwards and included them to the kernel pet. I dont remember straight if it did miss anything other important. People got their bluetooth connections working using stu90`s pet for handling. But Jemimah is knowledgeable of bluetooth stuff.
It's definitely missing suspend/hibernate capability. If we collect a list of other stuff we want, I can rebuild it or we can try to talk Barry into adding the missing items.Tman wrote:About the kernel. I remember reading one of Pemasu threads saying that Barry's 2.6.9.4 kernel was missing something in the compile, but can't remember exactly what that thing was...maybe it was bluetooth. I am not sure if we should stick with that kernel or go with another one atm. We should hold off compiling of drivers until this gets sorted out.
I think you should talk to ttuuxxx about kernel-related stuff, cause I don't know too much about the specific details of the kernel compile process. I'm sure whatever you decide will be good.jemimah wrote:..If we collect a list of other stuff we want, I can rebuild it or we can try to talk Barry into adding the missing items.
Here's a preliminary list of changes I would like to make.
Remove (redundant, unnecessary, not user-friendly, or better in repo):
xfontsel
pdisk
wakepup
prename
floppy formatter
gwhere
leafpad
e3
puppyPDF
homebank
planner
xcalc
ycalc
pplog
precord
Replace:
urxvt - lxterminal
pprocess - lxtask
seamonkey - midori
mp - nano
epdfview - evince
cgtkcalc - galculator
ptiming - gstpw
ayttm, meebo - pidgin
puppy podcast grabber
ssh-gui - puTTY
pmusic - goggles
xarchive - xarchiver
pswget - uget
Add:
Control Panel
powertop
gtksplitter
turma2
ddrescue
extundelete
gadmin-rsync
photorec
testdisk
fotoxx
dia
fbreader
gaiksaurus
gadmin-openvpn
vpnc
gadmin-sshd
Remmina
streamtuner
stardict
lightsword alarm clock
gworldclock
sgtt
Remove (redundant, unnecessary, not user-friendly, or better in repo):
xfontsel
pdisk
wakepup
prename
floppy formatter
gwhere
leafpad
e3
puppyPDF
homebank
planner
xcalc
ycalc
pplog
precord
Replace:
urxvt - lxterminal
pprocess - lxtask
seamonkey - midori
mp - nano
epdfview - evince
cgtkcalc - galculator
ptiming - gstpw
ayttm, meebo - pidgin
puppy podcast grabber
ssh-gui - puTTY
pmusic - goggles
xarchive - xarchiver
pswget - uget
Add:
Control Panel
powertop
gtksplitter
turma2
ddrescue
extundelete
gadmin-rsync
photorec
testdisk
fotoxx
dia
fbreader
gaiksaurus
gadmin-openvpn
vpnc
gadmin-sshd
Remmina
streamtuner
stardict
lightsword alarm clock
gworldclock
sgtt
Can anyone tell me the name of the font used in this?
- Attachments
-
- saluki_logo_text.png
- (32.38 KiB) Downloaded 2383 times
Hi all
Potential problem - no wifi working with Broadcom (is it wl.ko)? driver.
Just tried saluki on new laptop - Emachines (Acer) E732
and sadly no go with wifi.
I'm guessing the solution is kernel related and the appropriate modules
need to be activated (or whatever the proceedure is) but being a n00b,
I don't know how to do it.
I do know that racyNOP-5.2.2 with the later k3.0.7 kernel works 'cos
I just tried it.
Am sure Jemimah knows what's best - later kernel or tweek this one.
Many of the recently released budget (and expensive) laptops seem to have Broadcom wifi - and therefore - a large number of potential users
could be left wondering what to do.
Regarding acpi and suspend / resume etc, pemasu's ICE and DX series pup's have acpi etc working, as do the fatdog64 series puppy's.
Is it as simple as copying the folders over into saluki?
Probably not - but maybe some of what's there may be useful.
Hope the solutions don't produce too many headaches.
Thanks again to you all and very best regards - Ray
Potential problem - no wifi working with Broadcom (is it wl.ko)? driver.
Just tried saluki on new laptop - Emachines (Acer) E732
and sadly no go with wifi.
I'm guessing the solution is kernel related and the appropriate modules
need to be activated (or whatever the proceedure is) but being a n00b,
I don't know how to do it.
I do know that racyNOP-5.2.2 with the later k3.0.7 kernel works 'cos
I just tried it.
Am sure Jemimah knows what's best - later kernel or tweek this one.
Many of the recently released budget (and expensive) laptops seem to have Broadcom wifi - and therefore - a large number of potential users
could be left wondering what to do.
Regarding acpi and suspend / resume etc, pemasu's ICE and DX series pup's have acpi etc working, as do the fatdog64 series puppy's.
Is it as simple as copying the folders over into saluki?
Probably not - but maybe some of what's there may be useful.
Hope the solutions don't produce too many headaches.
Thanks again to you all and very best regards - Ray
Quick test run live pfix=ram on my main Linux box. Sound and internet working on initial boot..... had to run through xorgwizard to get my desired 1440x900 resolution.Simple enough though.
Installed Opera 11.52 since I had it handy, working fine.
# report-video
Saluki, version 5.2.2 on Mon 28 Nov 2011
Chip description:
0.0 VGA compatible controller
nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev c1)
oem: NVidia
product: NV18 () Board Chip Rev A2
X Server: Xorg
Driver used: nouveau
X.Org version: 1.11.0
dimensions: 1440x900 pixels (380x238 millimeters)
depth of root window: 24 planes
...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz
Not real impressive,but working ootb.....
# glxgears
563 frames in 5.0 seconds = 112.530 FPS
572 frames in 5.0 seconds = 114.212 FPS
576 frames in 5.0 seconds = 114.898 FPS
570 frames in 5.0 seconds = 113.983 FPS
557 frames in 5.0 seconds = 111.345 FPS
-Computer-
Processor : AMD Athlon(tm) XP 2400+
Memory : 1034MB (157MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Mon 28 Nov 2011 09:30:15 PM CST
-Display-
Resolution : 1440x900 pixels
OpenGL Renderer : Software Rasterizer
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : VIA8233 - VIA 8235
-Version-
Kernel : Linux 2.6.39.4 (i686)
Compiled : #1 SMP Tue Sep 13 23:40:41 GMT-8 2011
C Library : GNU C Library version 2.10.1 (stable)
Default C Compiler : Unknown
Distribution : Unknown distribution
Ethernet controller : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
Multimedia audio controller : VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller
VGA compatible controller : nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x]
# free
total used free shared buffers
Mem: 1034016 408872 625144 0 34244
-/+ buffers: 374628 659388
Swap: 1228936 0 1228936
#
Installed Opera 11.52 since I had it handy, working fine.
# report-video
Saluki, version 5.2.2 on Mon 28 Nov 2011
Chip description:
0.0 VGA compatible controller
nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev c1)
oem: NVidia
product: NV18 () Board Chip Rev A2
X Server: Xorg
Driver used: nouveau
X.Org version: 1.11.0
dimensions: 1440x900 pixels (380x238 millimeters)
depth of root window: 24 planes
...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz
Not real impressive,but working ootb.....
# glxgears
563 frames in 5.0 seconds = 112.530 FPS
572 frames in 5.0 seconds = 114.212 FPS
576 frames in 5.0 seconds = 114.898 FPS
570 frames in 5.0 seconds = 113.983 FPS
557 frames in 5.0 seconds = 111.345 FPS
-Computer-
Processor : AMD Athlon(tm) XP 2400+
Memory : 1034MB (157MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Mon 28 Nov 2011 09:30:15 PM CST
-Display-
Resolution : 1440x900 pixels
OpenGL Renderer : Software Rasterizer
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : VIA8233 - VIA 8235
-Version-
Kernel : Linux 2.6.39.4 (i686)
Compiled : #1 SMP Tue Sep 13 23:40:41 GMT-8 2011
C Library : GNU C Library version 2.10.1 (stable)
Default C Compiler : Unknown
Distribution : Unknown distribution
Ethernet controller : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
Multimedia audio controller : VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller
VGA compatible controller : nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x]
# free
total used free shared buffers
Mem: 1034016 408872 625144 0 34244
-/+ buffers: 374628 659388
Swap: 1228936 0 1228936
#