CPUtemperature disappeared after I messed with fan setting.
Posted: Sun 20 Nov 2011, 19:37
Surprising thing this. After an unclean reboot most likely
CPUtemperature worked on both Snow Puppy 5 and Slacko5.3
and then when I installed puppeee on my Asus Eeepc 900
and I installed it on the SD CF card reader in the slot to the right.
After being successful running puppeee I wanted to set
the fan and went into puppeee control center something
and there I changed a thing to automatic or something.
not sure what name it had. I have since tried to get it
working for hours and it fails to show temperature of CPU.
I have uninstalled and reinstalled cputemp.pet but no success.
could the change I did in puppee have told the hard ware
to not let any other OS get access to the Therm something
that worked before then for ever is locked somehow.
neither Snow Puppy 5 and Slacko5.3 with CPUtemp installed can show
temp now it only display eeepc-isa-000
Maybe the driver used to read the term somehow get rewritten or
needs to be replaced. Any ideas is welcomed.
But it show Thrm temp as 52 and that started the fan at a low repm.
so it do sense the environ maybe and not spu?
and another error crept up at same time too the hdd? is polled
once a second but nothing shows on Htop about that thing
what am I supposed to do apart from booting puppeee and trying
to restore what I did there? which I tried several time and fail at.
yes I tried to take out battery and power plug and so on.
did not help Yes I reinstalled CPUtmp too and I will now
test if it helps to start with a fresh puppeee44 and not use the old
save file. Maybe that move restore the sensor? Nope that did not work
I am out of imagination to what to do next. Can somebody help please!
CPUtemperature worked on both Snow Puppy 5 and Slacko5.3
and then when I installed puppeee on my Asus Eeepc 900
and I installed it on the SD CF card reader in the slot to the right.
After being successful running puppeee I wanted to set
the fan and went into puppeee control center something
and there I changed a thing to automatic or something.
not sure what name it had. I have since tried to get it
working for hours and it fails to show temperature of CPU.
I have uninstalled and reinstalled cputemp.pet but no success.
could the change I did in puppee have told the hard ware
to not let any other OS get access to the Therm something
that worked before then for ever is locked somehow.
neither Snow Puppy 5 and Slacko5.3 with CPUtemp installed can show
temp now it only display eeepc-isa-000
Maybe the driver used to read the term somehow get rewritten or
needs to be replaced. Any ideas is welcomed.
But it show Thrm temp as 52 and that started the fan at a low repm.
so it do sense the environ maybe and not spu?
and another error crept up at same time too the hdd? is polled
once a second but nothing shows on Htop about that thing
what am I supposed to do apart from booting puppeee and trying
to restore what I did there? which I tried several time and fail at.
yes I tried to take out battery and power plug and so on.
did not help Yes I reinstalled CPUtmp too and I will now
test if it helps to start with a fresh puppeee44 and not use the old
save file. Maybe that move restore the sensor? Nope that did not work
I am out of imagination to what to do next. Can somebody help please!