The time now is Thu 19 Apr 2018, 19:43
All times are UTC - 4 |
| Author |
Message |
tazoc
Joined: 11 Dec 2006
Posts: 1157
Location: Lower Columbia Basin WA US
|
 Posted: Sun 16 Oct 2011, 22:31 Post subject:
Re: Foxit reader
Subject description: Try evince |
|
| nickdobrinich wrote: | The foxitreader 1.1.0 pet will not work with 64 bit Lighthouse.
Same problem with square block substitution for fonts that Jim1911 encountered with Thunderbird. |
Hi Nick,
I don't see any 64-bit downloads for Foxit Reader. Missing fonts may indicate the app was compiled for 32-bit. How about evince-2.29.92-x86_64.pet for Fatdog 64? | nickdobrinich wrote: | What I really miss is the wbar from Lighthouse 5.03g.
When I try to run it from terminal, I get missing shared library libImlib2.so.1
I can't seem to find a 64 bit version of this lib.
Is there somewhere I should be looking?
Thx,
Nick |
I don't have a 64-bit wbar Pet. There is a libimlib2 pkg here, but I haven't tried it. I use the CairoDock SFS. Much nicer than wbar and all 64-bit, however it does require a compositing window manager, such as Xfce, Compiz-Fusion or KDE with desktop effects.
-TaZoC
_________________
lhpup.org  Lighthouse 64 6.02
|
|
Back to top
|
|
 |
Billtoo
Joined: 07 Apr 2009
Posts: 3421
Location: Ontario Canada
|
Posted: Sun 16 Oct 2011, 23:42 Post subject:
Lighthouse 64 5.12
Subject description: wbar |
|
I made these pets in Fatdog 521
| Description |
|
| Filesize |
107.89 KB |
| Viewed |
3274 Time(s) |
|
| Description |
|
Download |
| Filename |
wbar_DEV-2.2.2-x86_64.pet |
| Filesize |
30.28 KB |
| Downloaded |
393 Time(s) |
|
|
Back to top
|
|
|
nickdobrinich
Joined: 05 Apr 2007
Posts: 77
Location: Cleveland OH USA
|
Posted: Mon 17 Oct 2011, 01:11 Post subject:
SOLVED: Wbar in Lighthouse 64
Subject description: fixed it |
|
Tazoc and Billtoo,
You guys are the best.
Wbar is now working without the Cairo dock.
I installed the non-DEV pets.
Will experiment further.
Thx.
|
|
Back to top
|
|
|
gcmartin
Joined: 14 Oct 2005
Posts: 6730
Location: Earth
|
Posted: Thu 20 Oct 2011, 01:08 Post subject:
TaZoC
Subject description: I remember that you use VirtualBox |
|
in terms of VM, there were two items that came to light here. See section 1 and section 4
VirtualBox's introduction of bugs into the kernel and an advancement of QEMU and QEMU/KVM. It appears that a majority of users are using 64bit AMDs. All 64bit AMDs have VM hardware built-in (most 64bit Intels, too). This is required for KVM operations.
Assuming that LH64 is enabled for KVM in its kernel build, might this QEMU version work to our benefit?
One thing our 64bit systems give us is a wider memory and data paths, and typically we have more desktop memory (I have seen users from 1GB to 16GB RAM) in the 64bit forums. This puts us in a much better position to exploit this technology for our gains thru the OSes (kernel's) native use of the hardware.
If so, I'll start to look for reference and user-guide materials should this become a PET to work with our kernel. @JamesBond, I believe, is one of the resident experts on kernel needs for KVM operations.
It appears we really are on the doorstep of "jumping" to light-speed with the improvements happening all around us. It's like watching your soccer team as it become a number 1 contender in the world. <Pun>
hope this helps
_________________
Get ACTIVE Create Circles; Do those good things which benefit people's needs!
We are all related ... Its time to show that we know this!
3 Different Puppy Search Engines or use DogPile
|
|
Back to top
|
|
|
Meshworks
Joined: 25 Oct 2011
Posts: 38
|
Posted: Tue 25 Oct 2011, 18:09 Post subject:
 LHP512 / WINE/ DIRECTX
Subject description: Wine / Directx problem ... |
|
Thanks so much for the 64 bit puppy.
Couple of things have happened during my frugal setup:
I could not install / compile the nvidia 64 driver from the Nvidia website - error due to compiler version 4.5 not required 4.4 - so I used the nvidia driver pet:
NVIDIA-260.19.21-k2.6.35.7-L1.pet
I use vmware player so downloaded vmware player 4.0 .bundle from their website and installed - this failed (kept uninstalling itself right after install!). used the -I switch (ignore errorrs) and that sorted that.
sh VMware-Player-4.0.0-471780.x86_64.bundle -I
Vmware Player 4.0 seems to work.
I tried the compiz.sfs however came up with some problems there - no desktop or icons - big blue sky and ground but no cube so started again at that point...
Have I installed the correct driver package? That now looks unlikely as I have the following problem with wine:
Can anyone tell me what I'm missing and point me at the missing bits?
Mesa ? dri ?
Below are outputs from various files and commands:
| Code: |
bash-4.1# wine ~/.wine/drive_c/windows/system32/dxdiag.exe
err:winediag:X11DRV_WineGL_InitOpenglInfo Direct rendering is disabled, most likely your OpenGL drivers haven't been installed correctly
err:d3d_caps:WineD3D_CreateFakeGLContext Can't find a suitable iPixelFormat.
err:d3d:InitAdapters Failed to get a gl context for default adapter
Direct3D9 is not available without OpenGL.
fixme:win:EnumDisplayDevicesW ((null),0,0x32e4cc,0x00000000), stub!
err:d3d_caps:WineD3D_CreateFakeGLContext Can't find a suitable iPixelFormat.
err:d3d:InitAdapters Failed to get a gl context for default adapter
fixme:devenum:DEVENUM_ICreateDevEnum_CreateClassEnumerator Category {33d9a760-90c8-11d0-bd43-00a0c911ce86} not found
fixme:devenum:DEVENUM_ICreateDevEnum_CreateClassEnumerator Category {33d9a761-90c8-11d0-bd43-00a0c911ce86} not found
fixme:alsa:AudioClient_GetMixFormat Don't know what to do with 10000 channels, pretending there's only 2 channels
fixme:alsa:AudioClient_GetMixFormat Don't know what to do with 6 channels, pretending there's only 2 channels
fixme:alsa:AudioClient_GetMixFormat Don't know what to do with 10000 channels, pretending there's only 2 channels
fixme:mixer:ALSA_MixerInit No master control found on pcsp, disabling mixer
fixme:devenum:DEVENUM_ICreateDevEnum_CreateClassEnumerator Category {cc7bfb41-f175-11d1-a392-00e0291f3959} not found
fixme:devenum:DEVENUM_ICreateDevEnum_CreateClassEnumerator Category {cc7bfb46-f175-11d1-a392-00e0291f3959} not found
fixme:dxdiag:wWinMain Information dialog is not implemented
<root> ~
bash-4.1#
Here's the output from the LHP512 graphics test:
Wed 26 Oct 2011 Operating System: Lighthouse64-512 Linux 2.6.35.7
5.0 VGA compatible controller: nVidia Corporation C51PV [GeForce 6150] (rev a2)
oem: NVIDIA product: Crush50 Board - c51pv1 Chip Rev
X Server: Xorg Driver: nvidia: vendor=NVIDIA Corporation
X.Org version: 1.9.0
dimensions: 1600x1200 pixels (363x272 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce 6150/PCI/SSE2
OpenGL version string: 2.1.2 NVIDIA 260.19.21
AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
Core 0: 2009 MHz
Wine Version:
bash-4.1# wine --version
wine-1.3.26
GLX INFO:
bash-4.1# glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
server glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGI_video_sync, GLX_SGI_swap_control,
GLX_EXT_swap_control, GLX_EXT_texture_from_pixmap, GLX_ARB_create_context,
GLX_ARB_create_context_profile, GLX_EXT_create_context_es2_profile,
GLX_ARB_create_context_robustness, GLX_ARB_multisample,
GLX_NV_float_buffer, GLX_ARB_fbconfig_float
client glx vendor string: NVIDIA Corporation
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_visual_info,
GLX_EXT_visual_rating, GLX_EXT_import_context, GLX_SGI_video_sync,
GLX_NV_swap_group, GLX_NV_video_out, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGI_swap_control, GLX_EXT_swap_control, GLX_ARB_create_context,
GLX_ARB_create_context_profile, GLX_NV_float_buffer,
GLX_ARB_fbconfig_float, GLX_EXT_fbconfig_packed_float,
GLX_EXT_texture_from_pixmap, GLX_EXT_framebuffer_sRGB,
GLX_NV_present_video, GLX_NV_copy_image, GLX_NV_multisample_coverage,
GLX_NV_video_capture, GLX_EXT_create_context_es2_profile,
GLX_ARB_create_context_robustness
GLX version: 1.4
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGI_video_sync, GLX_SGI_swap_control,
GLX_EXT_swap_control, GLX_EXT_texture_from_pixmap, GLX_ARB_create_context,
GLX_ARB_create_context_profile, GLX_EXT_create_context_es2_profile,
GLX_ARB_create_context_robustness, GLX_ARB_multisample,
GLX_NV_float_buffer, GLX_ARB_fbconfig_float, GLX_ARB_get_proc_address
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce 6150/PCI/SSE2
OpenGL version string: 2.1.2 NVIDIA 260.19.21
OpenGL shading language version string: 1.20 NVIDIA via Cg compiler
OpenGL extensions:
GL_ARB_color_buffer_float, GL_ARB_copy_buffer, GL_ARB_depth_clamp,
GL_ARB_depth_texture, GL_ARB_draw_buffers, GL_ARB_ES2_compatibility,
GL_ARB_explicit_attrib_location, GL_ARB_fragment_program,
GL_ARB_fragment_program_shadow, GL_ARB_fragment_shader,
GL_ARB_framebuffer_object, GL_ARB_half_float_pixel,
GL_ARB_half_float_vertex, GL_ARB_imaging, GL_ARB_map_buffer_range,
GL_ARB_multisample, GL_ARB_multitexture, GL_ARB_occlusion_query,
GL_ARB_occlusion_query2, GL_ARB_pixel_buffer_object,
GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_provoking_vertex,
GL_ARB_sampler_objects, GL_ARB_separate_shader_objects,
GL_ARB_shader_objects, GL_ARB_shading_language_100, GL_ARB_shadow,
GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_float,
GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two,
GL_ARB_texture_rectangle, GL_ARB_texture_swizzle, GL_ARB_timer_query,
GL_ARB_transpose_matrix, GL_ARB_vertex_array_bgra,
GL_ARB_vertex_array_object, GL_ARB_vertex_buffer_object,
GL_ARB_vertex_program, GL_ARB_vertex_shader, GL_ARB_window_pos,
GL_ATI_draw_buffers, GL_ATI_texture_float, GL_ATI_texture_mirror_once,
GL_S3_s3tc, GL_EXT_texture_env_add, GL_EXT_abgr, GL_EXT_bgra,
GL_EXT_blend_color, GL_EXT_blend_equation_separate,
GL_EXT_blend_func_separate, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_compiled_vertex_array, GL_EXT_Cg_shader, GL_EXT_depth_bounds_test,
GL_EXT_direct_state_access, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
GL_EXT_framebuffer_blit, GL_EXT_framebuffer_multisample,
GL_EXT_framebuffer_object, GL_EXT_gpu_program_parameters,
GL_EXT_multi_draw_arrays, GL_EXT_packed_depth_stencil,
GL_EXT_packed_pixels, GL_EXT_pixel_buffer_object, GL_EXT_point_parameters,
GL_EXT_provoking_vertex, GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_shader_objects, GL_EXT_separate_specular_color,
GL_EXT_shadow_funcs, GL_EXT_stencil_two_side, GL_EXT_stencil_wrap,
GL_EXT_texture3D, GL_EXT_texture_compression_s3tc,
GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_filter_anisotropic, GL_EXT_texture_lod,
GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp,
GL_EXT_texture_object, GL_EXT_texture_sRGB, GL_EXT_texture_swizzle,
GL_EXT_timer_query, GL_EXT_vertex_array, GL_EXT_vertex_array_bgra,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_KTX_buffer_region, GL_NV_blend_square, GL_NV_copy_depth_to_color,
GL_NV_depth_clamp, GL_NV_fence, GL_NV_float_buffer, GL_NV_fog_distance,
GL_NV_fragment_program, GL_NV_fragment_program_option,
GL_NV_fragment_program2, GL_NV_framebuffer_multisample_coverage,
GL_NV_half_float, GL_NV_light_max_exponent, GL_NV_multisample_filter_hint,
GL_NV_occlusion_query, GL_NV_packed_depth_stencil, GL_NV_pixel_data_range,
GL_NV_point_sprite, GL_NV_primitive_restart, GL_NV_register_combiners,
GL_NV_register_combiners2, GL_NV_texgen_reflection, GL_NV_texture_barrier,
GL_NV_texture_compression_vtc, GL_NV_texture_env_combine4,
GL_NV_texture_expand_normal, GL_NV_texture_rectangle,
GL_NV_texture_shader, GL_NV_texture_shader2, GL_NV_texture_shader3,
GL_NV_vertex_array_range, GL_NV_vertex_array_range2, GL_NV_vertex_program,
GL_NV_vertex_program1_1, GL_NV_vertex_program2,
GL_NV_vertex_program2_option, GL_NV_vertex_program3,
GL_NVX_conditional_render, GL_SGIS_generate_mipmap, GL_SGIS_texture_lod,
GL_SGIX_depth_texture, GL_SGIX_shadow, GL_SUN_slice_accum
... and finally xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.21 (buildmeister@builder101) Thu Nov 4 21:47:28 PDT 2010
#Special base config file used in Puppy Linux.
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
#everything past here is auto-generated by Puppy's Xorg Wizard...
#PuppyHardwareProfile=NVIDIA
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
RgbPath "/usr/X11R7/lib/X11/rgb"
FontPath "/usr/X11R7/lib/X11/fonts/TTF/"
FontPath "/usr/X11R7/lib/X11/fonts/misc/"
EndSection
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# Load "type1"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
# This loads xtrap extension, used by xrandr
Load "xtrap"
# This loads the GLX module (if present)
Load "glx"
# This loads dri module (if present)
Load "extmod"
EndSection
Section "ServerFlags"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Enables mode switching with xrandr
# There is a report that this can cause Xorg not to work on some
# video hardware, so default is commented-out...
# but i want to use it in xorgwizard so leave on...
Option "RandR" "on"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc102"
Option "XkbLayout" "us" #xkeymap0
EndSection
Section "InputDevice"
#Option "Emulate3Timeout" "50"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2" #mouse0protocol
Option "Device" "/dev/mouse"
#Option "Emulate3Buttons"
Option "ZAxisMapping" "4 5" #scrollwheel
EndSection
Section "Modes"
#modes0modeline0
Identifier "Modes0"
EndSection
Section "Monitor"
#UseModes "Modes0" #monitor0usemodes
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 31.5 - 90.0
VertRefresh 60.0
Option "PreferredMode" "1360x768"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card0"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1360x768"
EndSubSection
EndSection
|
Ideas and advice welcome!
|
|
Back to top
|
|
|
Q5sys
Joined: 11 Dec 2008
Posts: 1126
|
Posted: Tue 25 Oct 2011, 21:22 Post subject:
Re: LHP512 / WINE/ DIRECTX
Subject description: Wine / Directx problem ... |
|
| Meshworks wrote: | I could not install / compile the nvidia 64 driver from the Nvidia website - error due to compiler version 4.5 not required 4.4 - so I used the nvidia driver pet:
NVIDIA-260.19.21-k2.6.35.7-L1.pet
Ideas and advice welcome! |
That is a small issue that should be resolved when TazOC releases his updated version. Last time we talked he was planning on making sure the GCC version included matched what the kernel was built with. (unless I misunderstood him)
So hopefully you will only have to deal with that for a short term. I'm in the same boat myself. You can manage to get the new driver to compile and load, but its not worth the hassle, and I get occasional X crashes because of it.
Stick with the pet you're using right now.
|
|
Back to top
|
|
|
Meshworks
Joined: 25 Oct 2011
Posts: 38
|
Posted: Tue 25 Oct 2011, 22:04 Post subject:
Re: LHP512 / WINE/ DIRECTX
Subject description: Wine / Directx problem ... |
|
"Stick with the pet you're using right now."
Many thanks for the advice - I've tried several different drivers and still no joy.
This is a known problem?
I couldn't find any other posts relating to it, so thought I had it wrong...
I'll keep watching this thread for updates / ideas.
This problem stops me from playing WoW and from running compiz.
|
|
Back to top
|
|
|
Q5sys
Joined: 11 Dec 2008
Posts: 1126
|
Posted: Tue 25 Oct 2011, 22:21 Post subject:
Re: LHP512 / WINE/ DIRECTX
Subject description: Wine / Directx problem ... |
|
| Meshworks wrote: | "Stick with the pet you're using right now."
Many thanks for the advice - I've tried several different drivers and still no joy.
This is a known problem?
I couldn't find any other posts relating to it, so thought I had it wrong...
I'll keep watching this thread for updates / ideas.
This problem stops me from playing WoW and from running compiz. |
The gcc mismatch is known, See: this post earlier in this thread
|
|
Back to top
|
|
|
Meshworks
Joined: 25 Oct 2011
Posts: 38
|
Posted: Tue 25 Oct 2011, 22:49 Post subject:
HTTP server lashup
Subject description: I really shouldn't have done it... |
|
In order to get my warcraft server back up and running quickly, i used an old copy of a 3 series apache / php / mysql .sfs which I have mounted on startup with bootmanager.
The mysql side runs (much to my suprise) once overwritten with a prior copy of the data.
However, the apache / httpd side will not run:
bash-4.1# /etc/init.d/rc.httpd start
/usr/sbin/httpd: error while loading shared libraries: libpcre.so.0: wrong ELF class: ELFCLASS64
<root> ~
bash-4.1#
This leaves me in a bit of a spot.
Currently mangos runs (old compile done on windows and now running on my LHP512 under wine - I still haven't managed to get puppy to compile mangos but my old winxp box can do that and I can then copy the executable to the linux box and wine it...) using the old mysql database from the old, converted .sfs
This means that my warcraft server actually runs and is serving players, but my web server (which should show game info, allow signups and serve setup and other files) does not!
I noticed START -> NETWORK -> MONKEY SERVER hiawatha? web server and tried to run it, however LHP crashes and I can't seem to find any way to run the server at a command line. I expect the 3 series sfs file may be responsible.
What I need is a 64 bit xampp that will easily install under LHP512.
Any ideas? What is everyone else running?
Lastly, anyone fancy helping me to get mangos compiling under puppy? My last go some time ago (using the excellent Tipsy Puppy) was not a success! A search of this forum indicates that this is the only post with the word MANGOS in it. Mangos Pup anyone? Also there is an Eve server emulator (still early days) that I would love to get compiling and working:
http://trac.evemu.org/wiki
|
|
Back to top
|
|
|
Meshworks
Joined: 25 Oct 2011
Posts: 38
|
Posted: Tue 25 Oct 2011, 23:29 Post subject:
Re: LHP512 / WINE/ DIRECTX
Subject description: Wine / Directx problem ... |
|
| Q5sys wrote: | | Meshworks wrote: | "Stick with the pet you're using right now."
Many thanks for the advice - I've tried several different drivers and still no joy.
This is a known problem?
I couldn't find any other posts relating to it, so thought I had it wrong...
I'll keep watching this thread for updates / ideas.
This problem stops me from playing WoW and from running compiz. |
The gcc mismatch is known, See: this post earlier in this thread |
Many thanks for the info - i missed the ref'd post somehow.
The fix looks a little beyond me.
BTW I have attackpup installed on a vm - knew I had seen your avatar before!
I still haven't had a chance to look at it properly but loved the look and feel.
Metasploit installed and updated and the tools I did look at all worked (some needed wifi driver patches- thats where I got lost).
|
|
Back to top
|
|
|
tazoc
Joined: 11 Dec 2006
Posts: 1157
Location: Lower Columbia Basin WA US
|
Posted: Thu 27 Oct 2011, 15:03 Post subject:
Re: L64-512 / WINE/ DIRECTX
Subject description: Wine / Directx problem ... |
|
| Meshworks wrote: | Thanks so much for the 64 bit puppy.
Couple of things have happened during my frugal setup:
I could not install / compile the nvidia 64 driver from the Nvidia website - error due to compiler version 4.5 not required 4.4 - so I used the nvidia driver pet:
NVIDIA-260.19.21-k2.6.35.7-L1.pet
I use vmware player so downloaded vmware player 4.0 .bundle from their website and installed - this failed (kept uninstalling itself right after install!). used the -I switch (ignore errorrs) and that sorted that.
sh VMware-Player-4.0.0-471780.x86_64.bundle -I
Vmware Player 4.0 seems to work.
I tried the compiz.sfs however came up with some problems there - no desktop or icons - big blue sky and ground but no cube so started again at that point...
Have I installed the correct driver package? That now looks unlikely as I have the following problem with wine:
Can anyone tell me what I'm missing and point me at the missing bits?
Mesa ? dri ?
Wed 26 Oct 2011 Operating System: Lighthouse64-512 Linux 2.6.35.7
5.0 VGA compatible controller: nVidia Corporation C51PV [GeForce 6150] (rev a2)
oem: NVIDIA product: Crush50 Board - c51pv1 Chip Rev
X Server: Xorg Driver: nvidia: vendor=NVIDIA Corporation
X.Org version: 1.9.0
dimensions: 1600x1200 pixels (363x272 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce 6150/PCI/SSE2
OpenGL version string: 2.1.2 NVIDIA 260.19.21
Wine Version:
bash-4.1# wine --version
wine-1.3.26 |
Thank you for the feedback, Meshworks. I'm getting similar output here.
Q5sys is correct. To address the kernel mismatch, I have re-compiled kernel 3.0.3 against gcc-4.5.2 for the next release. I've also re-compiled CUPS and am working on GTK2, gutenprint printer drivers, updates to the Video Wizard and proprietary drivers from ATI and Nvidia. I don't know why Compiz isn't working with Nvidia, but it's been hit and miss in my experience. Here is what my system is showing for dxdiag.exe | Code: | <root> ~
bash-4.1# wine --version
wine-1.3.26
<root> ~
bash-4.1# startwine ~/.wine/drive_c/windows/system32/dxdiag.exe
<root> ~
bash-4.1# wine ~/.wine/drive_c/windows/system32/dxdiag.exe
err:winediag:X11DRV_WineGL_InitOpenglInfo Direct rendering is disabled, most likely your OpenGL drivers haven't been installed correctly
fixme:win:EnumDisplayDevicesW ((null),0,0x32d6e8,0x00000000), stub!
fixme:win:EnumDisplayDevicesW ((null),0,0x32d5f8,0x00000000), stub!
fixme:devenum:DEVENUM_ICreateDevEnum_CreateClassEnumerator Category {33d9a760-90c8-11d0-bd43-00a0c911ce86} not found
fixme:devenum:DEVENUM_ICreateDevEnum_CreateClassEnumerator Category {33d9a761-90c8-11d0-bd43-00a0c911ce86} not found |
Yet Winamp and a few other Windows apps work OK. I think dxdiag.exe is under development as I recall some mention of it in the release notes for Wine. I think Mesa/3D is working (try the Lighthouse 3D-Demo, Menu->System) in Linux, just not in Wine.
There are some DirectX components available via Winetricks from the Wine Menu in Lighthouse 64, but I haven't had time to experiment with them.
I'm testing a new boot option, pfix=pure64 which disables the zWine and 32-bit libs component, so that Lighthouse 64 can be booted in pure 64-bit mode without error. That, and an xz compressed main file might trim the base ISO down below 200M. Then, if desired, maybe the Fatdog 64 32-bit libs and 32-bit Wine SFS can be used. | Quote: | | Code: | bash-4.1# /etc/init.d/rc.httpd start
/usr/sbin/httpd: error while loading shared libraries: libpcre.so.0: wrong ELF class: ELFCLASS64
<root> ~
bash-4.1# |
|
That message indicates the 32-bit httpd SFS needs a 32-bit libpcre. I tried to install 64-bit httpd in PPM and it installs, but won't run, (undefined symbol) so maybe we could re-compile it. I don't have any experience with xampp or mangos.
-TaZoC
_________________
lhpup.org Lighthouse 64 6.02
|
|
Back to top
|
|
|
Meshworks
Joined: 25 Oct 2011
Posts: 38
|
Posted: Fri 28 Oct 2011, 11:37 Post subject:
Wine / GL / DX
Subject description: Thanks for the response.... |
|
Many thanks for the response Tazoc ...
The GLXGEARS demo (MENU / SYSTEM / SYSTEM TOOLS / LIGHTHOUSE 3D-DEMO)
currently produces the following error with the pet driver - although it was fine at one point - I checked yesterday and all was fine :
"...
Close this window for next demo. Accumulating stats...
Error: couldn't get an RGB, Double-buffered visual
..."
Having checked xorg.conf I found a default copy of the file and replaced with details from my first post above. GLXGEARS works now. Swear I didn't mess with it so this remains unexplained. However SQLYOG still crashes as below.
SQLYOG crashes on window drag with the following error:
<root> ~/.wine/drive_c/Program64/SQLyog
bash-4.1# wine SQLyogCommunity.exe
fixme:heap:HeapSetInformation (nil) 1 (nil) 0
fixme:ntdll:NtLockFile I/O completion on lock not implemented yet
fixme:imagelist:ImageList_DragLeave DragLeave hWnd != DragEnter hWnd
X Error of failed request: BadAlloc (insufficient resources for operation)
Major opcode of failed request: 53 (X_CreatePixmap)
Serial number of failed request: 28433
Current serial number in output stream: 28652
and also crashes / wipes out with no error at console when I right click any folder ...
I'm keeping my current copy of LHP512 rather than trying chroot or going back to my old LHP install - - I'm bound to mess chroot up and frankly its soooo sweet having the latest OS on my machine that I cant bring myself to roll back to LHP503G.
Obviously I'll keep an eye out for the next release.
I'll take the machine in question offline tonight and see if I can sort the webserver. I'll try the xampp .pet that forum user Growler produces. That fails, I'll try the current ver. from apachefriends.
I must admit that I am missing a full working Wine. My copy of SQLYOG is also having problems under LHP512 (crashes when I move the window or click certain stuff) but I have a VM for that so it could be worse!
Again - many thanks for responding to my post and for all the work that has obviously gone in. It is appreciated.
EDIT: Added output from glxgears and SQLYOG
EDIT: Sorry for all the edits!
|
|
Back to top
|
|
|
Meshworks
Joined: 25 Oct 2011
Posts: 38
|
Posted: Sat 29 Oct 2011, 11:15 Post subject:
SMBPASSWD missing [SOLVED]
Subject description: Command not found |
|
Hi again...
<root> ~
bash-4.1# smbpasswd
bash: smbpasswd: command not found
How would you recommend I install smbpasswd?
Would this pet be suitable?
Simply, Teaching FATDOG to SAMBA (Full Windows Sharing)
http://www.murga-linux.com/puppy/viewtopic.php?t=62488
The link on the top of that page is missing so I assume it is these 3 packages?
http://distro.ibiblio.org/pub/linux/distributions/fatdog/pets/500/
samba-3.5.6.pet 2010-Nov-22 16:00:22 44.7M
Failed to install - turns out it was a corrupt download ... still have not tested though
samba-docs-3.0.37.pet 2010-Oct-27 23:21:24 7.3M
did not try
*** samba-extras-3.0.37.pet 2010-Oct-27 23:23:28 9.1M
gave me the smbpasswd command
|
|
Back to top
|
|
|
gcmartin
Joined: 14 Oct 2005
Posts: 6730
Location: Earth
|
| Posted: Sun 30 Oct 2011, 16:21 Post subject:
|
|
| Meshworks wrote: | bash-4.1# smbpasswd
bash: smbpasswd: command not found |
@Meshworks. Sorry for the delay to this.
The SAMBA that ships pre-installed with both FATDOG and LH64 has some shortcomings. These have been overcome with the SAMBA that is available in the Update Icon on your desktop.
Install it and ALL expected SAMBA features will be available to you, as well as, current international standards in that release as well. That version will work in all known LAN environments which use CIFS/SMB/SMB2. It also provides much needed functionality, should you need it, that is NOT included with the SAMBA that is pre-installed.
This SAMBA will automatically install replacing the pre-installed SAMBA. You'll simply need to set smbpasswd for a current Linux user, define a share in the smb.conf (don't forget to chmod the share), and away you go providing information, multimedia, or storage to any/all Apple/Microsoft/Linux devices on your LAN..
Hope this helps
_________________
Get ACTIVE Create Circles; Do those good things which benefit people's needs!
We are all related ... Its time to show that we know this!
3 Different Puppy Search Engines or use DogPile
|
|
Back to top
|
|
|
Meshworks
Joined: 25 Oct 2011
Posts: 38
|
Posted: Fri 04 Nov 2011, 22:57 Post subject:
Web Server - [Solved]
Subject description: Solution for web services |
|
| Code: |
bash-4.1# /etc/init.d/rc.httpd start
/usr/sbin/httpd: error while loading shared libraries: libpcre.so.0: wrong ELF class: ELFCLASS64
<root> ~
bash-4.1#
|
http://www.apachefriends.org/en/xampp-linux.html
After some failed attempts with other pets and sfs files, the above linked version runs fine.
From the above linked page:
Extract the downloaded archive file to /opt:
tar xvfz xampp-linux-1.7.7.tar.gz -C /opt
Warning : already installed XAMPP versions get overwritten by this command.
That's all. XAMPP is now installed below the /opt/lampp directory.
Step 3: Start
To start XAMPP simply call this command:
/opt/lampp/lampp start
You should now see something like this on your screen:
Starting XAMPP 1.7.7...
LAMPP: Starting Apache...
LAMPP: Starting MySQL...
LAMPP started.
Ready. Apache and MySQL are running.
Don't forget to change the default passwords!
/opt/lampp/lampp security
: )
EDIT: SOLVED... One problem from my error log:
sh: htpasswd: command not found
How do I add the htpasswd command?
command is at /opt/lampp/bin/htpasswd ...
bash-4.1# whereis htpasswd
htpasswd: /opt/lampp/bin/htpasswd
Last edited by Meshworks on Thu 10 Nov 2011, 21:03; edited 1 time in total
|
|
Back to top
|
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
Forum index » Advanced Topics » Puppy Derivatives
