Lucid Puppy 5.2.8 - Updated ISO Version 005 - APR 05 2012
sfs not found
I've seen this before when booting from USB stick. In that case it was a timing issue, where some USB sticks would show the problem, and others did not.
Not sure about CD's though. Haven't used these for years.
Not sure about CD's though. Haven't used these for years.
pnethood-0.7.1
With pnethood 0.6.8, when i copy a file to the remote folder, an error occurs:
I posted the issue at first on 03 Dec 2010.
http://www.murga-linux.com/puppy/viewto ... 451#473451
Solution:
pnethood-0.7.1.pet
http://shino.pos.to/party/bridge.cgi?puppy/opt/
NOTE: i18n, does not contain nbtscan.
#12jan2011 shinobar: refresh button, scanspeed 2 seconds, check if the rcfile exists
#23mar2012 shinobar: use mount.cifs with 'nounix' option(func_mount), UTF-8 encording default
#17may2012 shinobar: extracting sharename
#17may2012 shinobar: i18n
#20jun2012 shinobar: export GTKDIALOG for other func
#5jul2012 shinobar: fix was failed on Dpup Exprimo
#3aug2013 shinobar: sec=ntlm mount option for recent kernel (gcmartin), fix logging
http://www.murga-linux.com/puppy/viewtopic.php?t=87800
I posted the issue at first on 03 Dec 2010.
http://www.murga-linux.com/puppy/viewto ... 451#473451
Actually, the file is copied successfully. The problem is only the error message.Copying /mnt/sda3/tmp/some.txt as /mnt/network/SHINOBAR/video/public/tmp/some.txt
cp: failed to preserve ownership for `/mnt/network/SHINOBAR/video/public/tmp/some.txt': Permission denied
Failed to copy '/mnt/sda3/tmp/some.txt'
Solution:
pnethood-0.7.1.pet
http://shino.pos.to/party/bridge.cgi?puppy/opt/
NOTE: i18n, does not contain nbtscan.
#12jan2011 shinobar: refresh button, scanspeed 2 seconds, check if the rcfile exists
#23mar2012 shinobar: use mount.cifs with 'nounix' option(func_mount), UTF-8 encording default
#17may2012 shinobar: extracting sharename
#17may2012 shinobar: i18n
#20jun2012 shinobar: export GTKDIALOG for other func
#5jul2012 shinobar: fix was failed on Dpup Exprimo
#3aug2013 shinobar: sec=ntlm mount option for recent kernel (gcmartin), fix logging
http://www.murga-linux.com/puppy/viewtopic.php?t=87800
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Good morning Sylvander,
I am still of the opinion that your issue could be caused by a bad burn due to faulty optical media. This could give the symptoms you describe, which as Volhout has commented is akin to a timing problem. (Either the main sfs cannot be found or is reported as “not found
I am still of the opinion that your issue could be caused by a bad burn due to faulty optical media. This could give the symptoms you describe, which as Volhout has commented is akin to a timing problem. (Either the main sfs cannot be found or is reported as “not found
Regards ETP
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
I normally always use CD-RW->4x or DVD+RW->4x.ETP wrote:My inclination would be to try burning the ISO again (at the slowest possible speed) to a new CD-R or DVD-R/DVD-RW.
They always work OK.
Made a 2nd CD-RW->4x copy of "lupu-5.2.8.6-20131004.iso" by 1st blanking, then reburning, the CD-RW of "luci-001.005.iso" made recently and booting OK.
This is a known functioning CD-RW.
I opted to test the burn.
It failed [as they have always failed, yet are always fully functioning CD's].
Sylvander,
The burn test should not be giving failed results, if the program is working properly.
A type disc CD/DVD R or RW (+ or - ) support issue with the burner device?
I find that sticking my tongue, slightly out the left side of my mouth, while burning iso files seems to help. Right side optional.
What program are you using to burn iso images?I opted to test the burn.
It failed [as they have always failed, yet are always fully functioning CD's].
The burn test should not be giving failed results, if the program is working properly.
A type disc CD/DVD R or RW (+ or - ) support issue with the burner device?
I find that sticking my tongue, slightly out the left side of my mouth, while burning iso files seems to help. Right side optional.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
Hi Sylvander,
I have burned the ISO to a DVD-R and booted successfully on a net-book using an external USB connected DVD writer. The implication is that this build may have a problem booting from anything that is RW.
May I suggest that you also burn a DVD-R or CD-R and try again? I do not suspect hardware as you have successfully booted other pups from RW media.
I have burned the ISO to a DVD-R and booted successfully on a net-book using an external USB connected DVD writer. The implication is that this build may have a problem booting from anything that is RW.
May I suggest that you also burn a DVD-R or CD-R and try again? I do not suspect hardware as you have successfully booted other pups from RW media.
Regards ETP
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
Been doing a little testing but no problems so haven't been posting. But since I'm here.........
sh-4.1# report-video
VIDEO REPORT: Lucid , version 528
Chip description:
oem: NVIDIA
product: MCP61 - mcp61-86 Chip Rev
Driver used by Xorg:
Video mode used by Xorg:
Resolution: Depth:
...the above also recorded in /tmp/report-video
Actually using the old "nv" driver.
-Computer-
Processor : 4x AMD Athlon(tm) II X4 620 Processor
Memory : 2854MB (175MB used)
Operating System : Puppy Linux 0.52
User Name : root (root)
Date/Time : Fri 11 Oct 2013 03:16:49 PM CDT
-Display-
Resolution : 1366x768 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : HDA-Intel - HDA NVidia
Everything working correctly on initial boot.
sh-4.1# report-video
VIDEO REPORT: Lucid , version 528
Chip description:
oem: NVIDIA
product: MCP61 - mcp61-86 Chip Rev
Driver used by Xorg:
Video mode used by Xorg:
Resolution: Depth:
...the above also recorded in /tmp/report-video
Actually using the old "nv" driver.
-Computer-
Processor : 4x AMD Athlon(tm) II X4 620 Processor
Memory : 2854MB (175MB used)
Operating System : Puppy Linux 0.52
User Name : root (root)
Date/Time : Fri 11 Oct 2013 03:16:49 PM CDT
-Display-
Resolution : 1366x768 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : HDA-Intel - HDA NVidia
Everything working correctly on initial boot.
Hello, people.
Can somebody validate that, in lupu-5.2.8.6,
* du is not working correctly
* a lot of the pdf* utilities in /usr/bin are missing some libraries?
I've experienced those problems and solved them, but if I'm the only one
experiencing them, I'll go find a therapist instead of providing an upgrade
package. Sounds logical, eh?
Thanks in advance.
musher0
Can somebody validate that, in lupu-5.2.8.6,
* du is not working correctly
* a lot of the pdf* utilities in /usr/bin are missing some libraries?
I've experienced those problems and solved them, but if I'm the only one
experiencing them, I'll go find a therapist instead of providing an upgrade
package. Sounds logical, eh?
Thanks in advance.
musher0
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
1.
2.
It failed to boot just the same as the CD-RW's.
Unable to find the SFS file.
1 disk bites the dust [as I was sure it would].
My guess is the kernel of this Puppy doesn't include drivers for my hardware, but I'm no Puppy expert.
I've seen this before; some Puppies work with my hardware, and others don't.
That's the problem I've had with Lupu->[which once was my number-1 Puppy] [and others] since I got this new hardware.
Burniso2cd.bigpup wrote:What program are you using to burn iso images?
2.
Burned a Panasonic CD-R.ETP wrote:May I suggest that you also burn a DVD-R or CD-R and try again?
It failed to boot just the same as the CD-RW's.
Unable to find the SFS file.
1 disk bites the dust [as I was sure it would].
My guess is the kernel of this Puppy doesn't include drivers for my hardware, but I'm no Puppy expert.
I've seen this before; some Puppies work with my hardware, and others don't.
That's the problem I've had with Lupu->[which once was my number-1 Puppy] [and others] since I got this new hardware.
Could you give us the specs of this computer.Sylvander wrote:Is Lupu 5.2.8.6 likely to work with my new [2012] desktop PC Hardware?
The previous version didn't.(
Burniso2cd failing burn tests is not normal operation for this program. What is causing this is something to try and figure out.
One thing to consider:
flash wrote:Testing has shown that burning too slow works as bad as burning too fast. For best results, go for the middle of the burning speed range of the burner or the disk, whichever is slowest. For instance, you'll probably get best results burning an 8x disk at 4x, not 1x.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
Burniso2cd appears to automatically choose/set the burn speed.bigpup wrote:Mobo: ASRock H61M-S with 4GB RAM.Sylvander wrote:Could you give us the specs of this computer.
CPU: Dual core Pentium CPU G620T @2.20GHz 2200.00MHz
HDD: ATA ST250DM000-18D14
DVD-RW: TSSTcorp CDDVDW SH222BB
2.bigpup wrote:One thing to consider:flash wrote:Testing has shown that burning too slow works as bad as burning too fast. For best results, go for the middle of the burning speed range of the burner or the disk, whichever is slowest. For instance, you'll probably get best results burning an 8x disk at 4x, not 1x.
CD-RW: It's shown auto-set to 10x, but then burns at 4x [disk speed=4x].
CD-R: It burned at around 16x [disk speed=1x-48x].
@Sylvander: Does your system have any old Lupu 528 components, like savefiles, hanging around? They could be confusing this new Lupu's search procedure.
That's one of the numerous problems with burniso2cd. It doesn't have an "auto" speed setting that lets the burner pick its own preferred speed.Burniso2cd appears to automatically choose/set the burn speed.
No.rcrsn51 wrote:@Sylvander: Does your system have any old Lupu 528 components, like savefiles, hanging around? They could be confusing this new Lupu's search procedure.
I just now searched the only mounted partition for any files with "lupu" in their name.
The only item found is the empty 04-lupu folder I made in preparation for holding the "lupusave.?fs" file I intended to make, but didn't get that far.
Before making that folder I had checked that there were no existing "lupu" folders or files.
So I expect there should have been no problem of that kind.
Not unless "luci" files would cause a problem.
Sylvander,
Have you tried to boot using option puppy pfix=ram?
Driver support for your TSSTcorp CDDVDW SH222BB DVD drive could be the issue.
Did a Google search. Seems to be a really hard thing to find out any info about Linux drivers for it.
Have you tried to install to a USB flash drive and boot with it?
I would search all partitions, mounted or not mounted.I just now searched the only mounted partition for any files with "lupu" in their name.
Have you tried to boot using option puppy pfix=ram?
Driver support for your TSSTcorp CDDVDW SH222BB DVD drive could be the issue.
Did a Google search. Seems to be a really hard thing to find out any info about Linux drivers for it.
Have you tried to install to a USB flash drive and boot with it?
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
1.
Mounted all partitions, and searched them.
Result was the same as before = only found the 1 empty folder.
2.
--
DONE, it made no difference.
3.
4.
SUCCESS!
a. Using ROX, I couldn't mount the ISO file [stored on an external HDD] whilst working within Precise-5.6.1, so copied the files from the CD-RW to the FAT32 partition [with boot flag set] on an 8GB Flash Drive, and installed grub4dos.
b. It booted just fine, and is looking good [I'm typing this from it], EXCEPT...
c. There are no icons on the desktop for the partition-file-systems on my SATA->[internal HDD, or optical drive].
The Flash Drive partition shows up [as sda1].
Plus...
The partitions [3] on my USB connected external HDD's [2] show up OK.
Done.bigpup wrote:I would search all partitions, mounted or not mounted.
Mounted all partitions, and searched them.
Result was the same as before = only found the 1 empty folder.
2.
I believe I did; will try again to make sure.bigpup wrote:Have you tried to boot using option puppy pfix=ram?
--
DONE, it made no difference.
3.
Seems likely to me.bigpup wrote:Driver support for your TSSTcorp CDDVDW SH222BB DVD drive could be the issue.
4.
Not so far, but will try that [if possible] and report back.bigpup wrote:Have you tried to install to a USB flash drive and boot with it?
SUCCESS!
a. Using ROX, I couldn't mount the ISO file [stored on an external HDD] whilst working within Precise-5.6.1, so copied the files from the CD-RW to the FAT32 partition [with boot flag set] on an 8GB Flash Drive, and installed grub4dos.
b. It booted just fine, and is looking good [I'm typing this from it], EXCEPT...
c. There are no icons on the desktop for the partition-file-systems on my SATA->[internal HDD, or optical drive].
The Flash Drive partition shows up [as sda1].
Plus...
The partitions [3] on my USB connected external HDD's [2] show up OK.
That probably explains why you can't boot off the CD. This Lupu is missing the drivers needed to see these devices.Sylvander wrote:EXCEPT...c. There are no icons on the desktop for the partition-file-systems on my SATA->[internal HDD, or optical drive]..
[Edit] However, this Lupu can find my SATA hard drive OK.