Slacko Beta 1
James and Dave and bigpup... it's definitely netpbm, see my post
Puppy Linux Blog - contact me for access
- Lobster
- Official Crustacean
- Posts: 15522
- Joined: Wed 04 May 2005, 06:06
- Location: Paradox Realm
- Contact:
Sorry [dunce cap back on]Lobster, what do you mean about "nothing" with alsamixer? Did it show? Could you change values? I gather you still have no sound. Did you bump the physical connection?
Alsamixer ran but there was nothing obvious to change or add
- everything looked OK. I could change values. Changed a few . . .
Still no sound.
When you say bump - you mean injure?
No I don't think so.
Gonna do another 'puppy pfix=ram' and get sound
then gonna see what Gates it [Gates it = make unworkable, from 'to
Bill Gates a computer']
Onward
Puppy Linux
We try Harder. Then use Easier.
Thanks Micko I am in Slacko beta now but reusing the pupsave file that allowed me to keep the 1024 x 768 resolution.
terminal says.
But it does show 1024 x 768 resolution on the screen and Hardware information show that too. see graphics of that one.
terminal says.
# report-video
VIDEO REPORT: Slacko Puppy, version 4.99.1
Chip description:
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
Driver used by Xorg:
intel
Video mode used by Xorg:
Resolution: "800x600
800x600" Depth: Depth 24
...the above also recorded in /tmp/report-video
#
But it does show 1024 x 768 resolution on the screen and Hardware information show that too. see graphics of that one.
- Attachments
-
- slacko-report-video.jpg
- (71.59 KiB) Downloaded 319 times
I use Google Search on Puppy Forum
not an ideal solution though
not an ideal solution though
-
- Posts: 564
- Joined: Tue 09 Jun 2009, 21:06
Imagined, It was in PPM, but not now as I was going to get the latest but forgot. All radkes latest will be going into PPM, along with zigbert's DuDE. EDIT.. pupclockset-1.2 is in PPMBrown Mouse wrote:Was Pupclockset in the last version of Slacko or did I imagine it?
Nooby, thanks for info, I was concerned the driver may be vesa, but intel is ok for your HW. Many resolutions should be possible. You can install "mesa" if you like in PPM and slickpet, (note preferences are broken in slickpet) as is all the stuff bigpup said. Translations will need updating too.
Dave, reported to Barry, see blog. Obviously the netpbm was failing before X started for you if you needed a reboot. (all of that stuff runs in /etc/rc.d/rc.update.. just FYI )
Lobster, I was hoping to resolve your issue.. and I think I can fix it. In 10alsa script you posted you will see the comments I made. The "
Code: Select all
set 'Master Front' 75% unmute
set 'Master Front' -12dB
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Also, everybody.. I think gui_ziggy is better for default in PPM... agreed?
Last edited by 01micko on Thu 18 Aug 2011, 10:26, edited 1 time in total.
Puppy Linux Blog - contact me for access
- MinHundHettePerro
- Posts: 852
- Joined: Thu 05 Feb 2009, 22:22
- Location: SE
Hello !
Maybe too early on to mention these minor rough spots .
Here goes, anyway. On with the polishing;
Last line of the pinstall-script in mesa-7.9.2.pet says
-------------------
Commenting two offending lines in /root/.jwm/jwmrc-personalexit without errors.
--------
Half-BrokenDale has been mostly behaving itself (there was one occurence of lost menu text after running fixmenus).
Cheers / MHHP
Maybe too early on to mention these minor rough spots .
Here goes, anyway. On with the polishing;
Last line of the pinstall-script in mesa-7.9.2.pet says
.See the Menu>Shutsown"
-------------------
Commenting two offending lines in /root/.jwm/jwmrc-personal
makes<!--Key keycode="117">yourscript</Key>
<Key keycode="115">yourscript</Key-->
Code: Select all
# jwm -p
--------
Half-BrokenDale has been mostly behaving itself (there was one occurence of lost menu text after running fixmenus).
Cheers / MHHP
[color=green]Celeron 2.8 GHz, 1 GB, i82845, many ptns, modes 12, 13
Dual Xeon 3.2 GHz, 1 GB, nvidia quadro nvs 285[/color]
Slackos & 214X, ... and Q6xx
[color=darkred]Nämen, vaf....[/color] [color=green]ln -s /dev/null MHHP[/color]
Dual Xeon 3.2 GHz, 1 GB, nvidia quadro nvs 285[/color]
Slackos & 214X, ... and Q6xx
[color=darkred]Nämen, vaf....[/color] [color=green]ln -s /dev/null MHHP[/color]
Ah yes.. we can put some scripts in those jwm entries.. or not ..
will fix s=d
will fix s=d
Puppy Linux Blog - contact me for access
- Lobster
- Official Crustacean
- Posts: 15522
- Joined: Wed 04 May 2005, 06:06
- Location: Paradox Realm
- Contact:
This is what beta is all about I guess.
Ah good news your end.
Also . . . I booted up into Vesa - sound working
- sound persistent between boots
(already ahead of Lucid in that respect, time wise)
Added ATI and Flash - sound still working . . .
Keeping my eye on that green sound icon bottom right
and my ears open . . .
Now that I have sound
I am heading to phase 2 of my masterplan
[details soon]
- MinHundHettePerro
- Posts: 852
- Joined: Thu 05 Feb 2009, 22:22
- Location: SE
Whining on
Installed mesa-7.9.2.pet.
hth / MHHP
Installed mesa-7.9.2.pet.
Code: Select all
# glxgears
glxgears: error while loading shared libraries: libxcb-glx.so.0: cannot open shared object file: No such file or directory
[color=green]Celeron 2.8 GHz, 1 GB, i82845, many ptns, modes 12, 13
Dual Xeon 3.2 GHz, 1 GB, nvidia quadro nvs 285[/color]
Slackos & 214X, ... and Q6xx
[color=darkred]Nämen, vaf....[/color] [color=green]ln -s /dev/null MHHP[/color]
Dual Xeon 3.2 GHz, 1 GB, nvidia quadro nvs 285[/color]
Slackos & 214X, ... and Q6xx
[color=darkred]Nämen, vaf....[/color] [color=green]ln -s /dev/null MHHP[/color]
I know the exact problem.. a woof "template" is wrong.. me forgotMinHundHettePerro wrote:Whining on
Installed mesa-7.9.2.pet.
hth / MHHPCode: Select all
# glxgears glxgears: error while loading shared libraries: libxcb-glx.so.0: cannot open shared object file: No such file or directory
Puppy Linux Blog - contact me for access
yeah... I know.. what uses it?DaveS wrote:Dir /usr/share/gtrayicon is missing
Puppy Linux Blog - contact me for access
MHHP.. in case you are woofing, and for my safe keeping...
xcb_base FIXUPHACK in packages-templates (slacko version)
This could be something brookdales need too, and fix rendering on some others...
xcb_base FIXUPHACK in packages-templates (slacko version)
Code: Select all
LIBXCBSO="`find ./ -name "libxcb.so*" | tr '\n' ' '`"
LIBXCBRENDER="`find ./ -name "libxcb-render*" | tr '\n' ' '`"
LIBXCBXV="`find ./ -name "libxcb-xv*" | tr '\n' ' '`"
#xine-lib needs these two...
LIBXCBshape="`find ./ -name "libxcb-shape*" | tr '\n' ' '`"
LIBXCBshm="`find ./ -name "libxcb-shm*" | tr '\n' ' '`"
#building wary 019 (tpup with xorg7.3) 13 april 2010, needs this...
LIBXCBXLIB="`find ./ -name "libxcb-xlib*" | tr '\n' ' '`"
#extras for spup
LIBXCBres="`find ./ -name "libxcb-res*" | tr '\n' ' '`"
LIBXCBxevie="`find ./ -name "libxcb-xevie*" | tr '\n' ' '`"
LIBXCBxvmc="`find ./ -name "libxcb-xvmc*" | tr '\n' ' '`"
LIBXCBdamage="`find ./ -name "libxcb-damage*" | tr '\n' ' '`"
LIBXCBrecord="`find ./ -name "libxcb-record*" | tr '\n' ' '`"
LIBXCBdpms="`find ./ -name "libxcb-dpms*" | tr '\n' ' '`"
LIBXCBglx="`find ./ -name "libxcb-glx*" | tr '\n' ' '`"
LIBXCBscreensaver="`find ./ -name "libxcb-screensaver*" | tr '\n' ' '`"
LIBXCBrandr="`find ./ -name "libxcb-randr*" | tr '\n' ' '`"
#LIBXCBdri2="`find ./ -name "libxcb-dri2*" | tr '\n' ' '`"
LIBXCBcomposite="`find ./ -name "libxcb-composite*" | tr '\n' ' '`"
XCBDIR="`find ./ -type f -name "libxcb.so*" | head -n 1`"
XCBDIR="`dirname $XCBDIR`"
#mesa_base pkg libegl* needs these...
LIBXCBdri="`find ./ -name "libxcb-dri*" | tr '\n' ' '`"
LIBXCBxfixes="`find ./ -name "libxcb-xfixes*" | tr '\n' ' '`"
mkdir -p /tmp/libxcb
for ONEFILE in $LIBXCBSO $LIBXCBRENDER $LIBXCBXV $LIBXCBshape $LIBXCBshm $LIBXCBXLIB $LIBXCBdri $LIBXCBxfixes $LIBXCBres $LIBXCBxevie $LIBXCBxvmc $LIBXCBdamage $LIBXCBrecord $LIBXCBdpms $LIBXCBglx $LIBXCBscreensaver $LIBXCBrandr $LIBXCBcomposite
do
cp -a -f $ONEFILE /tmp/libxcb/
done
#PATHOK='no'
#[ "$XCBDIR" = "./usr/X11R7/lib" ] && PATHOK='yes'
#[ "$XCBDIR" = "./usr/lib" ] && PATHOK='yes'
#[ "$PATHOK" = "yes" ] && rm -rf ${XCBDIR}/*
rm -rf ./usr/lib/* 2>/dev/null
rm -rf ./usr/X11R7/lib/* 2>/dev/null
cp -a /tmp/libxcb/* ${XCBDIR}/
Last edited by 01micko on Thu 18 Aug 2011, 11:19, edited 1 time in total.
Puppy Linux Blog - contact me for access
stock current woof.. I have seen this though... when I installed nathan-wallpaper during tests, actually the icon ended up a broken symlink.. it is one anyway but not broken, I do recall same happening with another petrcrsn51 wrote:Is Slacko using a different version of the PET installer? I installed some home-made PETs and in each case Slacko changed the menu icon in the /usr/share/applications file to something different. When I manually changed it back to the original file, it worked fine. No other Puppy does this.
Puppy Linux Blog - contact me for access
- Lobster
- Official Crustacean
- Posts: 15522
- Joined: Wed 04 May 2005, 06:06
- Location: Paradox Realm
- Contact:
. . . the promised masterplan . . .
Will be trying to develop this in Slacko
http://puppylinux.org/wikka/Psippy