Dpup Exprimo 5.X.15
..just tried this..very effective. After setting latitude, longitude..make sure to select a method in the location drop-down menu.pemasu wrote:Redshift gui needs libiup.so for compiling which evaded my quick searching. But the binary works in exprimo just fine. Nice tool to play when you have tired eyes.
I have made an updated Icewm pet for dpup. It contains my usual customisations. This one is a little bit better than the one I made for SolidPup 5.1.1-Final.
The binaries for it come from the debian-i386 version. I used the Icewm-1.3.7-lucid pet as the base. (template)
Edit: reuploaded with a small bug-fix (you won't notice unless you install dillo and run it from the quicklaunch)
The binaries for it come from the debian-i386 version. I used the Icewm-1.3.7-lucid pet as the base. (template)
Edit: reuploaded with a small bug-fix (you won't notice unless you install dillo and run it from the quicklaunch)
- Attachments
-
- icewm-dpup.jpg
- (65.55 KiB) Downloaded 757 times
Hi pemasu,
This little script may be handy for right click Rox menu - it is to extract all .debs files in a directory at once.
cheers.
This little script may be handy for right click Rox menu - it is to extract all .debs files in a directory at once.
cheers.
- Attachments
-
- undeb-dir.gz
- remove fake .gz and make executable.
- (644 Bytes) Downloaded 214 times
Stu90. Just tested. It works fine. I had 3 debs at hand. I could test it in woof where I have 706 deb packages...if I dont find anything more useful to try.
I will create rox right click for...hmm..the name....Extract all .debs in directory....?
It would go to the /root/.config/rox.sourceforge.net/OpenWith/.inode_directory
I will create rox right click for...hmm..the name....Extract all .debs in directory....?
It would go to the /root/.config/rox.sourceforge.net/OpenWith/.inode_directory
I created rox right click for it. Now...when you right click the folder full of .debs...it extracts all debs inside that folder to the extracted-debs folder
- Attachments
-
- Extract-folder-of-debs-0.0.1.pet
- (1.13 KiB) Downloaded 220 times
None of the wireless apps in 5x13 will recognize a Netis WF-2109 USB nic.
The CD for this nic included a Linux Realtek driver:
RTL8192CU_8188CUS_8188CE-VAU_linux_v2..0.974.20100803.zip
I can send it to someone for testing. I'm not sure how to get it to be recognized.
ALSO ...
Network Status Information will not close when one clicks on the "X" in the upper-right corner, one must right-click then Close on the bottom toolbar. No biggie, just thought I'd mention it.
The CD for this nic included a Linux Realtek driver:
RTL8192CU_8188CUS_8188CE-VAU_linux_v2..0.974.20100803.zip
I can send it to someone for testing. I'm not sure how to get it to be recognized.
ALSO ...
Network Status Information will not close when one clicks on the "X" in the upper-right corner, one must right-click then Close on the bottom toolbar. No biggie, just thought I'd mention it.
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
Well...woof still lacks firmware for rtl8192cu and rtl8192de drivers. Here they are. Install the pet and then try in console...first to be sure: rmmod rtl8192cu and then: modprobe rtl8192cu. Rebooting might be needed, not sure....but if the previous commands fail try rebooting.
Above means that the driver comes with kernel already. You just need the corresponding firmware to be installed.
My latest Dpup Exprimo 5.X.13.SMP with 3.1.10 kernel has all those rtl8192 firmwares preinstalled. I did the update yesterday...there seems to be order for them, lol.
Pet removed...see later post.
Above means that the driver comes with kernel already. You just need the corresponding firmware to be installed.
My latest Dpup Exprimo 5.X.13.SMP with 3.1.10 kernel has all those rtl8192 firmwares preinstalled. I did the update yesterday...there seems to be order for them, lol.
Pet removed...see later post.
Last edited by pemasu on Mon 13 Feb 2012, 18:07, edited 2 times in total.
Thanks!
Hardinfo sees the nic but network does not.
I did reboot after running the PET.
I did manually-load the rtl8192cu USB module, when network did not pick up the nic, but "no new interfaces detected".
It is connected via a PCMCIA-USB adapter - if that is important.
Hardinfo sees the nic but network does not.
I did reboot after running the PET.
I did manually-load the rtl8192cu USB module, when network did not pick up the nic, but "no new interfaces detected".
It is connected via a PCMCIA-USB adapter - if that is important.
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
Okay...I repackaged the pet....so that it installs the firmwares to the /lib/firmware/rtlwifi...not to the /lib/modules/all-firmware/rtlwifi....since I didnt add the firmwares to the /etc/modules/firmwares.dep file. It is possible that the firmwares were not found from that location. Uninstall the previous pet and install this one. It might work now.
- Attachments
-
- rtl8192-firmwares-0.0.2.pet
- (53.48 KiB) Downloaded 213 times
Had to be out late yesterday but prior to that I tested this and same result as before - HardInfo sees the nic but none of the network apps will communicate with it.pemasu wrote:Okay...I repackaged the pet....so that it installs the firmwares to the /lib/firmware/rtlwifi...not to the /lib/modules/all-firmware/rtlwifi....since I didnt add the firmwares to the /etc/modules/firmwares.dep file. It is possible that the firmwares were not found from that location. Uninstall the previous pet and install this one. It might work now.
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
I apparently forgot to post my improved version of the
Abispell dictionaries
I now have version 1.2 available at the thread.
This version will switch the dictionaries automatically
from language to language when $LANG is changed.
http://www.murga-linux.com/puppy/viewto ... 453#604453
____________________________________________________
Abispell dictionaries
I now have version 1.2 available at the thread.
This version will switch the dictionaries automatically
from language to language when $LANG is changed.
http://www.murga-linux.com/puppy/viewto ... 453#604453
____________________________________________________
Was my 5x13 experience with the spell check moving Geany from Documents to Utility unique?
Also, spell check not then working?
Also, spell check not then working?
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
Spell check works with my recompiled Geany. You just need to install libenchant and some spell package.
Check this thread couple of pages back to find that Geany pet which has spellcheck plugin included.
Yeah. Geany is in Document now. Since it supports spell checking and with plugins several other document exporting features...I think Document is right section. Also...I have removed duplicate menu entries all together.
Check this thread couple of pages back to find that Geany pet which has spellcheck plugin included.
Yeah. Geany is in Document now. Since it supports spell checking and with plugins several other document exporting features...I think Document is right section. Also...I have removed duplicate menu entries all together.
new presets for ffconvert
I have some new presets for ffconvert.
Now I understand how to use the program.
http://murga-linux.com/puppy/viewtopic.php?t=76023
_________________________________________
Now I understand how to use the program.
http://murga-linux.com/puppy/viewtopic.php?t=76023
_________________________________________
mimeini's version of Geany didn't require
libenchant to be installed.
http://murga-linux.com/puppy/viewtopic. ... 18&t=75864
___________________________________
libenchant to be installed.
http://murga-linux.com/puppy/viewtopic. ... 18&t=75864
___________________________________