Dpup Exprimo 5.X.15
Confirmed also.Just installed Billtoo's SeaMonkey 2.6 pet http://www.murga-linux.com/puppy/viewto ... 188#591188 with no problems.radky wrote:Thanks pemasu, pets install correctly now.pemasu wrote:I have attached now the original petget stuff from the woof. When you install the pet, it replaces Shinobars edited files. Next pet installation after installing this pet should fix the problem.
In 5.X.10, I see the following message repeatedly (dmesg in console):
Code: Select all
vattery-acpitoo[21987]: segfault at 0 ip b6f7d65c sp bf92465c error 4 in libc-2.11.2.so[b6f4d000+13e000]
frisbee_tray[22325]: segfault at 0 ip b6e54c65 sp bfc699f0 error 4 in libc-2.11.2.so[b6df9000+13e000]
petget fix
Sorry for your inconvenience. Prepared a fix package.
http://shino.pos.to/linux/puppy/petget_ ... 120105.pet
Clicking this fix package, shown 'Please wait' message(it doesn't disappear.), then restart X.
The problem was in the last part of /usr/local/petget/i18n_head, the function vercmp.
The fix package above need not and does not affect if you have already installed the petget-barry-kauler.
http://shino.pos.to/linux/puppy/petget_ ... 120105.pet
Clicking this fix package, shown 'Please wait' message(it doesn't disappear.), then restart X.
The problem was in the last part of /usr/local/petget/i18n_head, the function vercmp.
The fix package above need not and does not affect if you have already installed the petget-barry-kauler.
Last edited by shinobar on Fri 06 Jan 2012, 06:19, edited 1 time in total.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Dpup Exprimo 5.X.10
I'm using the live dvd with a save file.
I installed the petget-barry-kauler-0.0.1.pet and have installed a
couple of other pets with no problems.
Thu 5 Jan 2012 Operating System: Dpup Exprimo-5.X.10 Linux 2.6.39
0.0 VGA compatible controller: nVidia Corporation Device 0de1 (rev a1)
oem: NVIDIA product: GF108 Board - 1071v0p1 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.7.7
dimensions: 1280x1024 pixels (382x302 millimeters)
depth of root window: 24 planes
AMD Phenom(tm) II X6 1045T Processor
Core 0: 2700 1: 2700 2: 2700 3: 2700 4: 2700 5: 2700 MHz
I made a pet of htop-1.0 and installed that, I'll attach it to this
message.
5x10 is working well so far, my 5x10.3 has been running for close to 9
days so it's been working well.
I installed the petget-barry-kauler-0.0.1.pet and have installed a
couple of other pets with no problems.
Thu 5 Jan 2012 Operating System: Dpup Exprimo-5.X.10 Linux 2.6.39
0.0 VGA compatible controller: nVidia Corporation Device 0de1 (rev a1)
oem: NVIDIA product: GF108 Board - 1071v0p1 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.7.7
dimensions: 1280x1024 pixels (382x302 millimeters)
depth of root window: 24 planes
AMD Phenom(tm) II X6 1045T Processor
Core 0: 2700 1: 2700 2: 2700 3: 2700 4: 2700 5: 2700 MHz
I made a pet of htop-1.0 and installed that, I'll attach it to this
message.
5x10 is working well so far, my 5x10.3 has been running for close to 9
days so it's been working well.
- Attachments
-
- htop-1.0-i686.pet
- (47.26 KiB) Downloaded 183 times
Just tested the Shinobars petget-fix-package. Now it works. I update here the Shinobars whole petget-package. The main thing with it is...if you have usb installation, Shinobars petget should save pet installations by using Puppy Package Manager (PPM) so that they are found and usable after reboot. Also uninstalling should work correctly. Ppl with hdd installations are not affected, so they can use Barrys or Shinobars....as they wish. The newest Barrys improvements are in both.
Dpup Exprimo 5.X.10
When I shut down the dvd tray opened to allow removing the dvd but it
continued to shut down so I ended up with a shut down computer and the
dvd tray wide open.
I suggest a "hit enter to continue" to give the user time to remove
the dvd, then have it shut the tray and poweroff.
continued to shut down so I ended up with a shut down computer and the
dvd tray wide open.
I suggest a "hit enter to continue" to give the user time to remove
the dvd, then have it shut the tray and poweroff.
Re: Dpup Exprimo 5.X.10
Can't you manually close the tray after the power is off?Billtoo wrote:When I shut down the dvd tray opened to allow removing the dvd but it
continued to shut down so I ended up with a shut down computer and the
dvd tray wide open.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Re: Dpup Exprimo 5.X.10
Not sure but on some computers that would mechanically break it?shinobar wrote:Can't you manually close the tray after the power is off?Billtoo wrote:When I shut down the dvd tray opened to allow removing the dvd but it
continued to shut down so I ended up with a shut down computer and the
dvd tray wide open.
I use Google Search on Puppy Forum
not an ideal solution though
not an ideal solution though
Re: Dpup Exprimo 5.X.10
I don't think it would be a great idea to force it shut.shinobar wrote:Can't you manually close the tray after the power is off?Billtoo wrote:When I shut down the dvd tray opened to allow removing the dvd but it
continued to shut down so I ended up with a shut down computer and the
dvd tray wide open.
EDIT:I don't know whether or not this was a great idea either but I
commented this part of the rc.shutdown and it has fixed the problem.
# eject CDs # 31dec10 moved up before umount -ar
# merge
#for ONEDRV in $MOUNTEDCDS; do
# echo "$DETECTEDCDS " | grep -q "$ONDRV[ ]" || \
# DETECTEDCDS="$DETECTEDCDS $ONEDRV"
#done
# eject all only if poweroff
#if [ "$DETECTEDCDS" -a "$WMEXITMODE" = "poweroff" ]; then
# echo -n "Ejecting CD's..." >/dev/console
# STATUS="done"
# for ONEDRV in $DETECTEDCDS; do
# eject /dev/$ONEDRV || STATUS="faled"
# done
# echo "$STATUS." >/dev/console
#fi
#busybox umount -ar > /dev/null 2>&1
#the end#
odd error when I installed this one frugally. I had no prior save file.
I wanted to test to play a mp4 but there seems to be not mplayer there at all.
Nothing happens when I click on it it in menu. What could that be about?
I go to bed now so any suggestion what is going on will be dealt with after
a delay of some 10 hours when I have waken up
I wanted to test to play a mp4 but there seems to be not mplayer there at all.
Nothing happens when I click on it it in menu. What could that be about?
I go to bed now so any suggestion what is going on will be dealt with after
a delay of some 10 hours when I have waken up
I use Google Search on Puppy Forum
not an ideal solution though
not an ideal solution though
Hi pemasu & nooby
I also have a problem with gnome-mplayer - says libgmtk is missing and this is confirmed by pfind...
This time I haven't loaded any pets except for flashplayer and the petget fix...
Thanks
peebee
I also have a problem with gnome-mplayer - says libgmtk is missing and this is confirmed by pfind...
This time I haven't loaded any pets except for flashplayer and the petget fix...
Code: Select all
# gnome-mplayer
gnome-mplayer: error while loading shared libraries: libgmtk.so.0: cannot open shared object file: No such file or directory
#
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Peebee. Good pick. Thank you !!!
Woof has picked wrong gnome-mplayer package. The one without that libgmtk.
Here is the right one. It is quite small, so you can install it as it is...or extract it with rox right click and grap just the libgmtk libs to the /usr/lib.
I am atm creating packages to the bug fix release and just in time...I can fix the gnome-mplayer.
Woof has picked wrong gnome-mplayer package. The one without that libgmtk.
Here is the right one. It is quite small, so you can install it as it is...or extract it with rox right click and grap just the libgmtk libs to the /usr/lib.
I am atm creating packages to the bug fix release and just in time...I can fix the gnome-mplayer.
- Attachments
-
- gnome-mplayer-1.0.5b1.pet
- (157.01 KiB) Downloaded 197 times
Confirmed. Also missingpeebee wrote:Hi pemasu & nooby
I also have a problem with gnome-mplayer - says libgmtk is missing and this is confirmed by pfind...
This time I haven't loaded any pets except for flashplayer and the petget fix...
ThanksCode: Select all
# gnome-mplayer gnome-mplayer: error while loading shared libraries: libgmtk.so.0: cannot open shared object file: No such file or directory #
peebee
Code: Select all
# gnome-mplayer
gnome-mplayer: error while loading shared libraries: libgmlib.so.0: cannot open shared object file: No such file or directory
I grabbed the libs out of 5.X10.3 .... replaced libgmtk.so.0: and then needed libgmlib.so.0: .Looks like the same version as the pet you uploaded.Working,that's the important thing.pemasu wrote:James C. You got the libs from the above pet. It seems that I have managed to replace the correct gnome-mplayer pet with earlier version. Not sure how it has happened, but so what...I will fix it with next release, which will be uploaded tomorrow. If you dont find anything really serious broken.
- Attachments
-
- Mplayer.png
- (32.83 KiB) Downloaded 754 times
Here's the report so far ...
I installed 5x10 on a Samsung NB30 netbook. It appears to have detected all of the hardware.
I ran the Seamonkey 2.4.1 PET.
The info pop-up info window said it was still "processing package database files" for too-long so I ignore it and opened SM (it takes over the Firefox icon on the desktop, same as in 5x9) and SM appears to work fine so far.
I chose SM Updates and downloaded 2.6.1 (20.0 MB, about 4min download). It appears to function OK as well.
I made an error in typing the password in Frisbee and rather than it prompting for a new password it ignored a request to "create profile" (since the password had failed it seems not-intuitive to assume that any profile would be created).
I had to guess that I needed to go to "Edit saved profiles" and delete the existing then try again.
More as I get a chance to test further ...
I installed 5x10 on a Samsung NB30 netbook. It appears to have detected all of the hardware.
I ran the Seamonkey 2.4.1 PET.
The info pop-up info window said it was still "processing package database files" for too-long so I ignore it and opened SM (it takes over the Firefox icon on the desktop, same as in 5x9) and SM appears to work fine so far.
I chose SM Updates and downloaded 2.6.1 (20.0 MB, about 4min download). It appears to function OK as well.
I made an error in typing the password in Frisbee and rather than it prompting for a new password it ignored a request to "create profile" (since the password had failed it seems not-intuitive to assume that any profile would be created).
I had to guess that I needed to go to "Edit saved profiles" and delete the existing then try again.
More as I get a chance to test further ...
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
Cool.pemasu wrote:Edoc. That pet installation message bug has been fixed, see the thread earlier.
It is a good thing, just thought I'd make the observation so others are not surprised.pemasu wrote:The browser icon change is due to the /usr/local/bin/defaultbrower file. The pet probably had that file with Seamonkey as the choice.
Also, I used the Touchpad settings to activate vertical and horizontal scrolling and also toggled-on the two-finger feature ... will test those later.
And, I observed the little Laptop app, will have to toy with that later as well!
Thanks!
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603