![Smile :)](./images/smilies/icon_smile.gif)
Dpup Exprimo 5.X.15
Fresh frugal install.Everything working.But....
Dialog box remained on screen when installing Conky pet.Remained several minutes ,at least 5,until I restarted X.
Dialog box remained on screen when installing Conky pet.Remained several minutes ,at least 5,until I restarted X.
- Attachments
-
- ppm stuck.png
- (21.93 KiB) Downloaded 417 times
Otherwise, things appear to be working correctly.See you went back to the older kernel as well.More testing... ![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
- Attachments
-
- Exprimo 5.X.10.png
- (173.83 KiB) Downloaded 399 times
Tried 2 more pets, pet installation is not completed until manually restarting "x".Dialog box just remains until x is manually restarted.Pets do install and work in the end.James C wrote:Fresh frugal install.Everything working.But....
Dialog box remained on screen when installing Conky pet.Remained several minutes ,at least 5,until I restarted X.
Htop and a game were the two pets.
I did a trial Frugal install - hardware all detected OK on old Panasonic Toughbook CF-29 laptop.
Connect via Frisbee OK, Firefox requested and added Flash and looked OK.
I did not choose to Save the install yet ...
Questions:
1. Could opening Firefox in 5x10 and then not saving that temporary Frugal install have corrupted my login settings for Seamonkey in 5x9 E-mail somehow? I am suddenly getting E-mail password errors when I reboot into dpup 5x9 Seamonkey.
2. Can the version of Seamonkey I used with 5x9 also be used with 5x10?
3. Is it OK to use the 5x9 Savefile or might that create problems?
Thanks!
Connect via Frisbee OK, Firefox requested and added Flash and looked OK.
I did not choose to Save the install yet ...
Questions:
1. Could opening Firefox in 5x10 and then not saving that temporary Frugal install have corrupted my login settings for Seamonkey in 5x9 E-mail somehow? I am suddenly getting E-mail password errors when I reboot into dpup 5x9 Seamonkey.
2. Can the version of Seamonkey I used with 5x9 also be used with 5x10?
3. Is it OK to use the 5x9 Savefile or might that create problems?
Thanks!
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
Same thing happened here with an emelfm2 pet (which I have used many times in prior Dpups). The pet did not install completely and Puppy Package Manager aborted (locked midstream) while trying to remove remnants of the pet. After restarting X, the pet did install but emelfm2 was not added to the Puppy menu.James C wrote:Fresh frugal install.Everything working.But....
Dialog box remained on screen when installing Conky pet.Remained several minutes ,at least 5,until I restarted X.
I'm trying a fourth pet.The first three pets installed and had menu entries ....after I restarted "x" and ran "fixmenus" in the terminal. I'm using pets from my private repository (extra directory on my hdd).radky wrote:Same thing happened here with an emelfm2 pet (which I have used many times in prior Dpups). The pet did not install completely and Puppy Package Manager aborted (locked midstream) while trying to remove remnants of the pet. After restarting X, the pet did install but emelfm2 was not added to the Puppy menu.James C wrote:Fresh frugal install.Everything working.But....
Dialog box remained on screen when installing Conky pet.Remained several minutes ,at least 5,until I restarted X.
This last attempt, I've been staring at the dialog box for about 10 minutes.... no progress.Guess I'll restart 'X' and see if it installs.....
![Laughing :lol:](./images/smilies/icon_lol.gif)
Yes. The Shinobars today posted petget seems to have still some problem. It stucks in pet database checking stage. Shinobar posted the updated package today to fix something, but it looks like there is still problems. I didnt have much time to test it since I wanted to have it and I had woof building under my fingers. Well...it happens.
I have attached now the original petget stuff from the woof. When you install the pet, it replaces Shinobars edited files. Next pet installation after installing this pet should behave normally...I hope so...lol. Emptying the /tmp helps also...if needed after installation..... since it deletes the petget temporary files which sometimes interferes.
I think I will wait if Shinobar can figure out what might interfere his pet in dpup.
I have attached now the original petget stuff from the woof. When you install the pet, it replaces Shinobars edited files. Next pet installation after installing this pet should behave normally...I hope so...lol. Emptying the /tmp helps also...if needed after installation..... since it deletes the petget temporary files which sometimes interferes.
I think I will wait if Shinobar can figure out what might interfere his pet in dpup.
- Attachments
-
- petget-barry-kauler-0.0.1.pet
- (46.96 KiB) Downloaded 201 times
Last edited by pemasu on Fri 06 Jan 2012, 00:24, edited 1 time in total.
Edoc. I would make backup of your 5.X.9 savefile first. Boot 5.X.10 or whatever but not that 5.X.9 and then copy to the safe place the original savefile. Then try to use it with 5.X.10. I dont ever test upgrades or previous savefiles. I start from the scratch. So...I dont know much of the compatibility. About Seamonkey. Test it...and you see. If there is problem...I would like to fix it. But I dont have time to test many apps how compatible they are. I more likely try to fix errors....which testers find...lol.
It seems...that the Frisbee-manager to disable-enable frisbee has been left out. I dont understand in what stage this has happened. But here it is....for those who cant use Frisbee....I know there are those users....whose wireless does not like Frisbee. I use mostly Frisbee, so I didnt notice that it was missing until I checked the menu entries once again.
- Attachments
-
- frisbee-manager-0.0.2.pet
- (1.84 KiB) Downloaded 190 times
Confirmed also.Just installed Billtoo's SeaMonkey 2.6 pet http://www.murga-linux.com/puppy/viewto ... 188#591188 with no problems.radky wrote:Thanks pemasu, pets install correctly now.pemasu wrote:I have attached now the original petget stuff from the woof. When you install the pet, it replaces Shinobars edited files. Next pet installation after installing this pet should fix the problem.
In 5.X.10, I see the following message repeatedly (dmesg in console):
Code: Select all
vattery-acpitoo[21987]: segfault at 0 ip b6f7d65c sp bf92465c error 4 in libc-2.11.2.so[b6f4d000+13e000]
frisbee_tray[22325]: segfault at 0 ip b6e54c65 sp bfc699f0 error 4 in libc-2.11.2.so[b6df9000+13e000]
petget fix
Sorry for your inconvenience. Prepared a fix package.
http://shino.pos.to/linux/puppy/petget_ ... 120105.pet
Clicking this fix package, shown 'Please wait' message(it doesn't disappear.), then restart X.
The problem was in the last part of /usr/local/petget/i18n_head, the function vercmp.
The fix package above need not and does not affect if you have already installed the petget-barry-kauler.
http://shino.pos.to/linux/puppy/petget_ ... 120105.pet
Clicking this fix package, shown 'Please wait' message(it doesn't disappear.), then restart X.
The problem was in the last part of /usr/local/petget/i18n_head, the function vercmp.
The fix package above need not and does not affect if you have already installed the petget-barry-kauler.
Last edited by shinobar on Fri 06 Jan 2012, 06:19, edited 1 time in total.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Dpup Exprimo 5.X.10
I'm using the live dvd with a save file.
I installed the petget-barry-kauler-0.0.1.pet and have installed a
couple of other pets with no problems.
Thu 5 Jan 2012 Operating System: Dpup Exprimo-5.X.10 Linux 2.6.39
0.0 VGA compatible controller: nVidia Corporation Device 0de1 (rev a1)
oem: NVIDIA product: GF108 Board - 1071v0p1 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.7.7
dimensions: 1280x1024 pixels (382x302 millimeters)
depth of root window: 24 planes
AMD Phenom(tm) II X6 1045T Processor
Core 0: 2700 1: 2700 2: 2700 3: 2700 4: 2700 5: 2700 MHz
I made a pet of htop-1.0 and installed that, I'll attach it to this
message.
5x10 is working well so far, my 5x10.3 has been running for close to 9
days so it's been working well.
I installed the petget-barry-kauler-0.0.1.pet and have installed a
couple of other pets with no problems.
Thu 5 Jan 2012 Operating System: Dpup Exprimo-5.X.10 Linux 2.6.39
0.0 VGA compatible controller: nVidia Corporation Device 0de1 (rev a1)
oem: NVIDIA product: GF108 Board - 1071v0p1 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.7.7
dimensions: 1280x1024 pixels (382x302 millimeters)
depth of root window: 24 planes
AMD Phenom(tm) II X6 1045T Processor
Core 0: 2700 1: 2700 2: 2700 3: 2700 4: 2700 5: 2700 MHz
I made a pet of htop-1.0 and installed that, I'll attach it to this
message.
5x10 is working well so far, my 5x10.3 has been running for close to 9
days so it's been working well.
- Attachments
-
- htop-1.0-i686.pet
- (47.26 KiB) Downloaded 183 times